blob: cebb515411ba8925f16b1857207102205cc7a6d0 [file]
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
#include <gtest/gtest.h>
#include <chrono>
#include <cstdio>
#include <random>
#include <string>
#include <vector>
#include "common/device_id.h"
#include "common/record.h"
#include "common/schema.h"
#include "reader/tsfile_reader.h"
#include "writer/tsfile_writer.h"
namespace storage {
// get_timeseries_schema() reports the encoding and the compressor of every
// series it returns. Those two fields are per-chunk properties recorded in the
// chunk header on disk, so the only way to report them correctly is to read
// them back from the file.
//
// The series below are deliberately registered with codecs that differ from
// the library defaults for their data type (INT32 defaults to TS_2DIFF, FLOAT
// to GORILLA, and the default compressor is LZ4 when it is compiled in), so a
// reader that reports defaults instead of the stored values is caught.
class TimeseriesSchemaCodecTest : public ::testing::Test {
protected:
void SetUp() override {
libtsfile_init();
writer_ = new TsFileWriter();
file_name_ = std::string("timeseries_schema_codec_test_") +
generate_random_string(10) + std::string(".tsfile");
remove(file_name_.c_str());
int flags = O_WRONLY | O_CREAT | O_TRUNC;
#ifdef _WIN32
flags |= O_BINARY;
#endif
ASSERT_EQ(writer_->open(file_name_, flags, 0666), common::E_OK);
}
void TearDown() override {
delete writer_;
writer_ = nullptr;
remove(file_name_.c_str());
libtsfile_destroy();
}
static std::string generate_random_string(int length) {
std::mt19937 gen(static_cast<unsigned int>(
std::chrono::system_clock::now().time_since_epoch().count()));
std::uniform_int_distribution<> dis(0, 61);
const std::string chars =
"0123456789"
"abcdefghijklmnopqrstuvwxyz"
"ABCDEFGHIJKLMNOPQRSTUVWXYZ";
std::string s;
s.reserve(static_cast<size_t>(length));
for (int i = 0; i < length; ++i) {
s += chars[static_cast<size_t>(dis(gen))];
}
return s;
}
// Look a measurement up by name: get_timeseries_schema() makes no promise
// about the order of its result.
static const MeasurementSchema* find(
const std::vector<MeasurementSchema>& schemas,
const std::string& name) {
for (const auto& s : schemas) {
if (s.measurement_name_ == name) {
return &s;
}
}
return nullptr;
}
std::string file_name_;
TsFileWriter* writer_ = nullptr;
};
TEST_F(TimeseriesSchemaCodecTest, ReportsStoredEncodingAndCompressor) {
const std::string device = "root.codec.dev1";
// PLAIN/UNCOMPRESSED for an INT32 series: both differ from the defaults
// that INT32 would otherwise get (TS_2DIFF, and LZ4 where available).
ASSERT_EQ(
writer_->register_timeseries(
device, MeasurementSchema("plain_i32", common::INT32, common::PLAIN,
common::UNCOMPRESSED)),
common::E_OK);
// TS_2DIFF on a FLOAT series, whose default encoding is GORILLA.
ASSERT_EQ(
writer_->register_timeseries(
device, MeasurementSchema("ts2diff_float", common::FLOAT,
common::TS_2DIFF, common::UNCOMPRESSED)),
common::E_OK);
for (int i = 0; i < 100; ++i) {
TsRecord record(1622505600000 + i * 1000, device);
record.add_point("plain_i32", static_cast<int32_t>(i));
record.add_point("ts2diff_float", static_cast<float>(i) + 0.5f);
ASSERT_EQ(writer_->write_record(record), common::E_OK);
}
ASSERT_EQ(writer_->flush(), common::E_OK);
ASSERT_EQ(writer_->close(), common::E_OK);
TsFileReader reader;
ASSERT_EQ(reader.open(file_name_), common::E_OK);
std::vector<MeasurementSchema> schemas;
ASSERT_EQ(reader.get_timeseries_schema(
std::make_shared<StringArrayDeviceID>(device), schemas),
common::E_OK);
ASSERT_EQ(schemas.size(), 2u);
const MeasurementSchema* i32 = find(schemas, "plain_i32");
ASSERT_NE(i32, nullptr);
EXPECT_EQ(i32->data_type_, common::INT32);
EXPECT_EQ(i32->encoding_, common::PLAIN)
<< "encoding was not read back from the chunk header";
EXPECT_EQ(i32->compression_type_, common::UNCOMPRESSED)
<< "compressor was not read back from the chunk header";
const MeasurementSchema* flt = find(schemas, "ts2diff_float");
ASSERT_NE(flt, nullptr);
EXPECT_EQ(flt->data_type_, common::FLOAT);
EXPECT_EQ(flt->encoding_, common::TS_2DIFF)
<< "encoding was not read back from the chunk header";
EXPECT_EQ(flt->compression_type_, common::UNCOMPRESSED)
<< "compressor was not read back from the chunk header";
reader.close();
}
// Same requirement for an aligned device: the value columns of an aligned
// chunk group carry their own chunk headers, so the codecs must survive the
// aligned write path too.
TEST_F(TimeseriesSchemaCodecTest, ReportsStoredCodecForAlignedDevice) {
const std::string device = "root.codec.aligned1";
ASSERT_EQ(
writer_->register_aligned_timeseries(
device, MeasurementSchema("plain_i32", common::INT32, common::PLAIN,
common::UNCOMPRESSED)),
common::E_OK);
for (int i = 0; i < 100; ++i) {
TsRecord record(1622505600000 + i * 1000, device);
record.add_point("plain_i32", static_cast<int32_t>(i));
ASSERT_EQ(writer_->write_record_aligned(record), common::E_OK);
}
ASSERT_EQ(writer_->flush(), common::E_OK);
ASSERT_EQ(writer_->close(), common::E_OK);
TsFileReader reader;
ASSERT_EQ(reader.open(file_name_), common::E_OK);
std::vector<MeasurementSchema> schemas;
ASSERT_EQ(reader.get_timeseries_schema(
std::make_shared<StringArrayDeviceID>(device), schemas),
common::E_OK);
ASSERT_EQ(schemas.size(), 1u);
// The data type must be the value column type, not the VECTOR placeholder
// that the aligned time column reports.
EXPECT_EQ(schemas[0].data_type_, common::INT32);
EXPECT_EQ(schemas[0].encoding_, common::PLAIN)
<< "encoding was not read back from the chunk header";
EXPECT_EQ(schemas[0].compression_type_, common::UNCOMPRESSED)
<< "compressor was not read back from the chunk header";
reader.close();
}
// Every series in the device above is UNCOMPRESSED, so an implementation that
// hard-coded UNCOMPRESSED would still pass. Register two series of the same
// data type that differ only in their codecs: each schema must report its own
// chunk header, not one value shared across the device.
#ifdef ENABLE_SNAPPY
TEST_F(TimeseriesSchemaCodecTest, ReportsCodecPerSeriesNotPerDevice) {
const std::string device = "root.codec.dev2";
ASSERT_EQ(
writer_->register_timeseries(
device, MeasurementSchema("plain_raw", common::INT32, common::PLAIN,
common::UNCOMPRESSED)),
common::E_OK);
ASSERT_EQ(writer_->register_timeseries(
device, MeasurementSchema("ts2diff_snappy", common::INT32,
common::TS_2DIFF, common::SNAPPY)),
common::E_OK);
for (int i = 0; i < 100; ++i) {
TsRecord record(1622505600000 + i * 1000, device);
record.add_point("plain_raw", static_cast<int32_t>(i));
record.add_point("ts2diff_snappy", static_cast<int32_t>(i * 3));
ASSERT_EQ(writer_->write_record(record), common::E_OK);
}
ASSERT_EQ(writer_->flush(), common::E_OK);
ASSERT_EQ(writer_->close(), common::E_OK);
TsFileReader reader;
ASSERT_EQ(reader.open(file_name_), common::E_OK);
std::vector<MeasurementSchema> schemas;
ASSERT_EQ(reader.get_timeseries_schema(
std::make_shared<StringArrayDeviceID>(device), schemas),
common::E_OK);
ASSERT_EQ(schemas.size(), 2u);
const MeasurementSchema* raw = find(schemas, "plain_raw");
ASSERT_NE(raw, nullptr);
EXPECT_EQ(raw->encoding_, common::PLAIN);
EXPECT_EQ(raw->compression_type_, common::UNCOMPRESSED);
const MeasurementSchema* snappy = find(schemas, "ts2diff_snappy");
ASSERT_NE(snappy, nullptr);
EXPECT_EQ(snappy->encoding_, common::TS_2DIFF);
EXPECT_EQ(snappy->compression_type_, common::SNAPPY)
<< "the compressor was not taken from this series' own chunk header";
reader.close();
}
#endif // ENABLE_SNAPPY
// The measurement name sits between the chunk type byte and the codec bytes in
// the chunk header, so a name long enough to push those bytes past a
// fixed-size read buffer would silently fall back to the defaults.
TEST_F(TimeseriesSchemaCodecTest, ReportsStoredCodecForLongMeasurementName) {
const std::string device = "root.codec.dev3";
const std::string long_name(600, 'm');
ASSERT_EQ(
writer_->register_timeseries(
device, MeasurementSchema(long_name, common::INT32, common::PLAIN,
common::UNCOMPRESSED)),
common::E_OK);
for (int i = 0; i < 100; ++i) {
TsRecord record(1622505600000 + i * 1000, device);
record.add_point(long_name, static_cast<int32_t>(i));
ASSERT_EQ(writer_->write_record(record), common::E_OK);
}
ASSERT_EQ(writer_->flush(), common::E_OK);
ASSERT_EQ(writer_->close(), common::E_OK);
TsFileReader reader;
ASSERT_EQ(reader.open(file_name_), common::E_OK);
std::vector<MeasurementSchema> schemas;
ASSERT_EQ(reader.get_timeseries_schema(
std::make_shared<StringArrayDeviceID>(device), schemas),
common::E_OK);
ASSERT_EQ(schemas.size(), 1u);
const MeasurementSchema* ms = find(schemas, long_name);
ASSERT_NE(ms, nullptr);
EXPECT_EQ(ms->encoding_, common::PLAIN)
<< "the chunk header read was truncated by the measurement name";
EXPECT_EQ(ms->compression_type_, common::UNCOMPRESSED)
<< "the chunk header read was truncated by the measurement name";
reader.close();
}
} // namespace storage