apm-sniffer/config/agent.config - skywalking - Git at Google

 # Licensed to the Apache Software Foundation (ASF) under one
 # or more contributor license agreements.  See the NOTICE file
 # distributed with this work for additional information
 # regarding copyright ownership.  The ASF licenses this file
 # to you under the Apache License, Version 2.0 (the
 # "License"); you may not use this file except in compliance
 # with the License.  You may obtain a copy of the License at
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 # The agent namespace
 # agent.namespace=${SW_AGENT_NAMESPACE:default-namespace}

 # The service name in UI
 agent.service_name=${SW_AGENT_NAME:Your_ApplicationName}

 # The number of sampled traces per 3 seconds
 # Negative or zero means off, by default
 # agent.sample_n_per_3_secs=${SW_AGENT_SAMPLE:-1}

 # Authentication active is based on backend setting, see application.yml for more details.
 # agent.authentication = ${SW_AGENT_AUTHENTICATION:xxxx}

 # The max amount of spans in a single segment.
 # Through this config item, SkyWalking keep your application memory cost estimated.
 # agent.span_limit_per_segment=${SW_AGENT_SPAN_LIMIT:150}

 # If the operation name of the first span is included in this set, this segment should be ignored. Multiple values should be separated by `,`.
 # agent.ignore_suffix=${SW_AGENT_IGNORE_SUFFIX:.jpg,.jpeg,.js,.css,.png,.bmp,.gif,.ico,.mp3,.mp4,.html,.svg}

 # If true, SkyWalking agent will save all instrumented classes files in `/debugging` folder.
 # SkyWalking team may ask for these files in order to resolve compatible problem.
 # agent.is_open_debugging_class = ${SW_AGENT_OPEN_DEBUG:true}

 # If true, SkyWalking agent will cache all instrumented classes files to memory or disk files (decided by class cache mode),
 # allow other javaagent to enhance those classes that enhanced by SkyWalking agent.
 # agent.is_cache_enhanced_class = ${SW_AGENT_CACHE_CLASS:false}

 # The instrumented classes cache mode: MEMORY or FILE
 # MEMORY: cache class bytes to memory, if instrumented classes is too many or too large, it may take up more memory
 # FILE: cache class bytes in `/class-cache` folder, automatically clean up cached class files when the application exits
 # agent.class_cache_mode = ${SW_AGENT_CLASS_CACHE_MODE:MEMORY}

 # The operationName max length
 # Notice, in the current practice, we don't recommend the length over 190.
 # agent.operation_name_threshold=${SW_AGENT_OPERATION_NAME_THRESHOLD:150}

 # The agent use gRPC plain text in default.
 # If true, SkyWalking agent uses TLS even no CA file detected.
 # agent.force_tls=${SW_AGENT_FORCE_TLS:false}

 # If true, skywalking agent will enable profile when user create a new profile task. Otherwise disable profile.
 # profile.active=${SW_AGENT_PROFILE_ACTIVE:true}

 # Parallel monitor segment count
 # profile.max_parallel=${SW_AGENT_PROFILE_MAX_PARALLEL:5}

 # Max monitor segment time(minutes), if current segment monitor time out of limit, then stop it.
 # profile.max_duration=${SW_AGENT_PROFILE_DURATION:10}

 # Max dump thread stack depth
 # profile.dump_max_stack_depth=${SW_AGENT_PROFILE_DUMP_MAX_STACK_DEPTH:500}

 # Snapshot transport to backend buffer size
 # profile.snapshot_transport_buffer_size=${SW_AGENT_PROFILE_SNAPSHOT_TRANSPORT_BUFFER_SIZE:50}

 # Backend service addresses.
 collector.backend_service=${SW_AGENT_COLLECTOR_BACKEND_SERVICES:127.0.0.1:11800}

 # Logging file_name
 logging.file_name=${SW_LOGGING_FILE_NAME:skywalking-api.log}

 # Logging level
 logging.level=${SW_LOGGING_LEVEL:INFO}

 # Logging dir
 # logging.dir=${SW_LOGGING_DIR:""}

 # Logging max_file_size, default: 300 * 1024 * 1024 = 314572800
 # logging.max_file_size=${SW_LOGGING_MAX_FILE_SIZE:314572800}

 # The max history log files. When rollover happened, if log files exceed this number,
 # then the oldest file will be delete. Negative or zero means off, by default.
 # logging.max_history_files=${SW_LOGGING_MAX_HISTORY_FILES:-1}

 # Listed exceptions would not be treated as an error. Because in some codes, the exception is being used as a way of controlling business flow.
 # Besides, the annotation named IgnoredException in the trace toolkit is another way to configure ignored exceptions.
 # statuscheck.ignored_exceptions=${SW_STATUSCHECK_IGNORED_EXCEPTIONS:}

 # The max recursive depth when checking the exception traced by the agent. Typically, we don't recommend setting this more than 10, which could cause a performance issue. Negative value and 0 would be ignored, which means all exceptions would make the span tagged in error status.
 # statuscheck.max_recursive_depth=${SW_STATUSCHECK_MAX_RECURSIVE_DEPTH:1}

 # Mount the specific folders of the plugins. Plugins in mounted folders would work.
 plugin.mount=${SW_MOUNT_FOLDERS:plugins,activations}

 # Exclude activated plugins
 # plugin.exclude_plugins=${SW_EXCLUDE_PLUGINS:}

 # If set to true, the parameters of the sql (typically java.sql.PreparedStatement) would be collected.
 # plugin.jdbc.trace_sql_parameters=${SW_JDBC_TRACE_SQL_PARAMETERS:false}

 # Kafka producer configuration
 # plugin.kafka.bootstrap_servers=${SW_KAFKA_BOOTSTRAP_SERVERS:localhost:9092}
 # if you want to set namespace. please make sure the OAP server has set it in Kafka fetcher module
 # plugin.kafka.namespace=${SW_KAFKA_NAMESPACE:""}

 # Match spring bean with regex expression for classname
 # plugin.springannotation.classname_match_regex=${SW_SPRINGANNOTATION_CLASSNAME_MATCH_REGEX:}
	# Licensed to the Apache Software Foundation (ASF) under one
	# or more contributor license agreements. See the NOTICE file
	# distributed with this work for additional information
	# regarding copyright ownership. The ASF licenses this file
	# to you under the Apache License, Version 2.0 (the
	# "License"); you may not use this file except in compliance
	# with the License. You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	# The agent namespace
	# agent.namespace=${SW_AGENT_NAMESPACE:default-namespace}

	# The service name in UI
	agent.service_name=${SW_AGENT_NAME:Your_ApplicationName}

	# The number of sampled traces per 3 seconds
	# Negative or zero means off, by default
	# agent.sample_n_per_3_secs=${SW_AGENT_SAMPLE:-1}

	# Authentication active is based on backend setting, see application.yml for more details.
	# agent.authentication = ${SW_AGENT_AUTHENTICATION:xxxx}

	# The max amount of spans in a single segment.
	# Through this config item, SkyWalking keep your application memory cost estimated.
	# agent.span_limit_per_segment=${SW_AGENT_SPAN_LIMIT:150}

	# If the operation name of the first span is included in this set, this segment should be ignored. Multiple values should be separated by `,`.
	# agent.ignore_suffix=${SW_AGENT_IGNORE_SUFFIX:.jpg,.jpeg,.js,.css,.png,.bmp,.gif,.ico,.mp3,.mp4,.html,.svg}

	# If true, SkyWalking agent will save all instrumented classes files in `/debugging` folder.
	# SkyWalking team may ask for these files in order to resolve compatible problem.
	# agent.is_open_debugging_class = ${SW_AGENT_OPEN_DEBUG:true}

	# If true, SkyWalking agent will cache all instrumented classes files to memory or disk files (decided by class cache mode),
	# allow other javaagent to enhance those classes that enhanced by SkyWalking agent.
	# agent.is_cache_enhanced_class = ${SW_AGENT_CACHE_CLASS:false}

	# The instrumented classes cache mode: MEMORY or FILE
	# MEMORY: cache class bytes to memory, if instrumented classes is too many or too large, it may take up more memory
	# FILE: cache class bytes in `/class-cache` folder, automatically clean up cached class files when the application exits
	# agent.class_cache_mode = ${SW_AGENT_CLASS_CACHE_MODE:MEMORY}

	# The operationName max length
	# Notice, in the current practice, we don't recommend the length over 190.
	# agent.operation_name_threshold=${SW_AGENT_OPERATION_NAME_THRESHOLD:150}

	# The agent use gRPC plain text in default.
	# If true, SkyWalking agent uses TLS even no CA file detected.
	# agent.force_tls=${SW_AGENT_FORCE_TLS:false}

	# If true, skywalking agent will enable profile when user create a new profile task. Otherwise disable profile.
	# profile.active=${SW_AGENT_PROFILE_ACTIVE:true}

	# Parallel monitor segment count
	# profile.max_parallel=${SW_AGENT_PROFILE_MAX_PARALLEL:5}

	# Max monitor segment time(minutes), if current segment monitor time out of limit, then stop it.
	# profile.max_duration=${SW_AGENT_PROFILE_DURATION:10}

	# Max dump thread stack depth
	# profile.dump_max_stack_depth=${SW_AGENT_PROFILE_DUMP_MAX_STACK_DEPTH:500}

	# Snapshot transport to backend buffer size
	# profile.snapshot_transport_buffer_size=${SW_AGENT_PROFILE_SNAPSHOT_TRANSPORT_BUFFER_SIZE:50}

	# Backend service addresses.
	collector.backend_service=${SW_AGENT_COLLECTOR_BACKEND_SERVICES:127.0.0.1:11800}

	# Logging file_name
	logging.file_name=${SW_LOGGING_FILE_NAME:skywalking-api.log}

	# Logging level
	logging.level=${SW_LOGGING_LEVEL:INFO}

	# Logging dir
	# logging.dir=${SW_LOGGING_DIR:""}

	# Logging max_file_size, default: 300 * 1024 * 1024 = 314572800
	# logging.max_file_size=${SW_LOGGING_MAX_FILE_SIZE:314572800}

	# The max history log files. When rollover happened, if log files exceed this number,
	# then the oldest file will be delete. Negative or zero means off, by default.
	# logging.max_history_files=${SW_LOGGING_MAX_HISTORY_FILES:-1}

	# Listed exceptions would not be treated as an error. Because in some codes, the exception is being used as a way of controlling business flow.
	# Besides, the annotation named IgnoredException in the trace toolkit is another way to configure ignored exceptions.
	# statuscheck.ignored_exceptions=${SW_STATUSCHECK_IGNORED_EXCEPTIONS:}

	# The max recursive depth when checking the exception traced by the agent. Typically, we don't recommend setting this more than 10, which could cause a performance issue. Negative value and 0 would be ignored, which means all exceptions would make the span tagged in error status.
	# statuscheck.max_recursive_depth=${SW_STATUSCHECK_MAX_RECURSIVE_DEPTH:1}

	# Mount the specific folders of the plugins. Plugins in mounted folders would work.
	plugin.mount=${SW_MOUNT_FOLDERS:plugins,activations}

	# Exclude activated plugins
	# plugin.exclude_plugins=${SW_EXCLUDE_PLUGINS:}

	# If set to true, the parameters of the sql (typically java.sql.PreparedStatement) would be collected.
	# plugin.jdbc.trace_sql_parameters=${SW_JDBC_TRACE_SQL_PARAMETERS:false}

	# Kafka producer configuration
	# plugin.kafka.bootstrap_servers=${SW_KAFKA_BOOTSTRAP_SERVERS:localhost:9092}
	# if you want to set namespace. please make sure the OAP server has set it in Kafka fetcher module
	# plugin.kafka.namespace=${SW_KAFKA_NAMESPACE:""}

	# Match spring bean with regex expression for classname
	# plugin.springannotation.classname_match_regex=${SW_SPRINGANNOTATION_CLASSNAME_MATCH_REGEX:}