| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| |
| |
| # LayoutSupportManager |
| MSG_ERR_NonEmptyContainer=Cannot initialize layout for non-empty container.\nThe default container instance cannot contain any components. |
| |
| # BorderLayoutSupport |
| PROP_direction=Direction |
| HINT_direction=Direction of the component in the BorderLayout |
| |
| # GridBagLayoutSupport |
| PROP_gridx=Grid X |
| HINT_gridx=Grid X value of the GridBagConstraints |
| PROP_gridy=Grid Y |
| HINT_gridy=Grid Y value of the GridBagConstraints |
| PROP_gridwidth=Grid Width |
| HINT_gridwidth=Grid width value of the GridBagConstraints |
| PROP_gridheight=Grid Height |
| HINT_gridheight=Grid height value of the GridBagConstraints |
| PROP_fill=Fill |
| HINT_fill=Fill value of the GridBagConstraints |
| PROP_ipadx=Internal Padding X |
| HINT_ipadx=Internal padding X value of the GridBagConstraints |
| PROP_ipady=Internal Padding Y |
| HINT_ipady=Internal padding Y value of the GridBagConstraints |
| PROP_insets=Inf\u00e4llningar |
| HINT_insets=Insets value of the GridBagConstraints |
| PROP_anchor=Anchor |
| HINT_anchor=Anchor value of the GridBagConstraints |
| PROP_weightx=Weight X |
| HINT_weightx=Weight X value of the GridBagConstraints |
| PROP_weighty=Weight Y |
| HINT_weighty=Weight Y value of the GridBagConstraints |
| VALUE_relative=Relative |
| VALUE_remainder=Remainder |
| VALUE_fill_none=Ingen |
| VALUE_fill_horizontal=Horisontellt |
| VALUE_fill_vertical=Vertikalt |
| VALUE_fill_both=Both |
| VALUE_anchor_center=Center |
| VALUE_anchor_north=North |
| VALUE_anchor_northeast=Northeast |
| VALUE_anchor_east=East |
| VALUE_anchor_southeast=Southeast |
| VALUE_anchor_south=South |
| VALUE_anchor_southwest=Southwest |
| VALUE_anchor_west=West |
| VALUE_anchor_northwest=Northwest |
| VALUE_anchor_pagestart=Page Start |
| VALUE_anchor_pageend=Page End |
| VALUE_anchor_linestart=Line Start |
| VALUE_anchor_lineend=Line End |
| VALUE_anchor_firstlinestart=First Line Start |
| VALUE_anchor_firstlineend=First Line End |
| VALUE_anchor_lastlinestart=Last Line Start |
| VALUE_anchor_lastlineend=Last Line End |
| VALUE_anchor_above_baseline=Above Baseline |
| VALUE_anchor_above_baseline_leading=Above Baseline Leading |
| VALUE_anchor_above_baseline_trailing=Above Baseline Trailing |
| VALUE_anchor_baseline=Baseline |
| VALUE_anchor_baseline_leading=Baseline Leading |
| VALUE_anchor_baseline_trailing=Baseline Trailing |
| VALUE_anchor_below_baseline=Below Baseline |
| VALUE_anchor_below_baseline_leading=Below Baseline Leading |
| VALUE_anchor_below_baseline_trailing=Below Baseline Trailing |
| |
| ACSD_GridBagCustomizer=I/T |
| MSG_ERR_MoreThan512=The form cannot be correctly converted to GridBagLayout. The correct conversion would exceed the limit on the number of rows and columns (GridBagLayout allows at most 512 columns and rows). |
| |
| # GridBagLayout customizer |
| CTL_CustomizerTitle=GridBagLayout Customizer |
| CTL_CloseButton=St\u00e4ng |
| CTL_HelpButton=Hj\u00e4lp |
| |
| CTL_GBC_anchorPanel=Anchor |
| CTL_GBC_fillPanel=Fill |
| CTL_GBC_ipadPanel=I-Padding |
| CTL_GBC_insetsPanel=Inf\u00e4llningar |
| CTL_GBC_gridSizePanel=Grid Size |
| |
| #CTL_GBC_anchor.NW=Northwest |
| #CTL_GBC_anchor.N=North |
| #CTL_GBC_anchor.NE=Northeast |
| #CTL_GBC_anchor.W=West |
| #CTL_GBC_anchor.C=Center |
| #CTL_GBC_anchor.E=East |
| #CTL_GBC_anchor.SW=Southwest |
| #CTL_GBC_anchor.S=South |
| #CTL_GBC_anchor.SE=Southeast |
| |
| CTL_GBC_fill.H=Horizontal Fill |
| CTL_GBC_fill.V=Vertical Fill |
| |
| CTL_GBC_ipad.HM=Horizontal -1 |
| CTL_GBC_ipad.HP=Horizontal +1 |
| CTL_GBC_ipad.VM=Vertical -1 |
| CTL_GBC_ipad.VP=Vertical +1 |
| |
| CTL_GBC_insets.topM=Top -1 |
| CTL_GBC_insets.topP=Top +1 |
| CTL_GBC_insets.leftP=Left +1 |
| CTL_GBC_insets.leftM=Left -1 |
| CTL_GBC_insets.rightM=Right -1 |
| CTL_GBC_insets.rightP=Right +1 |
| CTL_GBC_insets.bottomM=Bottom -1 |
| CTL_GBC_insets.bottomP=Bottom +1 |
| CTL_GBC_insets.HM=Left & Right -1 |
| CTL_GBC_insets.HP=Left & Right +1 |
| CTL_GBC_insets.VM=Top & Bottom -1 |
| CTL_GBC_insets.VP=Top & Bottom +1 |
| CTL_GBC_insets.BM=All -1 |
| CTL_GBC_insets.BP=All +1 |
| |
| CTL_GBC_gridSize.HM=-1 Column |
| CTL_GBC_gridSize.HP=+1 Column |
| CTL_GBC_gridSize.RH=Horizontal Remainder |
| CTL_GBC_gridSize.VM=-1 Row |
| CTL_GBC_gridSize.VP=+1 Row |
| CTL_GBC_gridSize.RV=Vertical Remainder |
| |
| # BoxLayoutSupport |
| PROP_axis=Axis |
| HINT_axis=Layout axis |
| VALUE_axis_page=Page Axis |
| VALUE_axis_line=Line Axis |
| VALUE_axis_x=X Axis |
| VALUE_axis_y=Y Axis |
| |
| # CardLayoutSupport |
| PROP_cardName=Card Name |
| HINT_cardName=Card name in CardLayout |
| |
| # AbsoluteLayoutSupport |
| PROP_posx=X |
| HINT_posx=X Position of the component |
| PROP_posy=Y |
| HINT_posy=Y Position of the component |
| PROP_width=Width |
| HINT_width=Width of the component |
| PROP_height=Height |
| HINT_height=Height of the component |
| VALUE_preferred=Preferred |
| |
| # JSplitPaneSupport |
| PROP_splitPos=Split Position |
| HINT_splitPos=The position at which this component's splitter should be placed |
| |
| # JTabbedPaneSupport |
| PROP_tabTitle=Tab Title |
| HINT_tabTitle=Title of this component's tab |
| PROP_tabIcon=Tab Icon |
| HINT_tabIcon=Icon of this component's tab |
| PROP_tabToolTip=Tab ToolTip |
| HINT_tabToolTip=ToolTip of this component's tab |
| |
| # JLayeredPaneSupport |
| PROP_layer=Layer |
| HINT_layer=The layer in which to place this component |
| |