| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2010 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| ACS_UniqueA11yDesc=Select this checkbox to mark the index as unique. |
| |
| # New JDBC Driver |
| AddDriverDialogTitle=New JDBC Driver |
| AddDriverDriverFile=Dri&ver File(s): |
| AddDriverDriverClass=Driver &Class\: |
| AddDriverDriverName=&Namn\: |
| AddDriverDriverAdd=&L\u00e4gg till... |
| AddDriverDriverRemove=&Ta bort |
| AddDriverDriverFind=&S\u00f6k |
| AddDriverProgressStart=Searching for driver classes... |
| AddDriverMissingFile=Driver File is missing. |
| AddDriverMissingDriverFiles=<Missing Driver Files> |
| AddDriverDuplicateFile=Driver File {0} is already added. |
| AddDriverMissingClass=Driver Class is missing. |
| AddDriverMissingName=Driver Name is missing. |
| AddDriverDuplicateName=Driver Name is already used. |
| ACS_AddDriverDialogA11yDesc=New JDBC driver dialog. |
| ACS_AddDriverDriverFileA11yDesc=Driver files. |
| ACS_AddDriverDriverFileListA11yName=Driver files list box |
| ACS_AddDriverDriverDriverClassA11yDesc=Driver class. |
| ACS_AddDriverDriverDriverClassComboBoxA11yName=Driver class combo box |
| ACS_AddDriverDriverNameA11yDesc=Name of the driver. |
| ACS_AddDriverDriverNameTextFieldA11yName=Driver text field |
| ACS_AddDriverAddButtonA11yDesc=Add driver file. |
| ACS_AddDriverRemoveButtonA11yDesc=Remove driver file. |
| ACS_AddDriverFindButtonA11yDesc=Find driver class. |
| ACS_AddDriverProgressBarA11yName=Searching for driver classes progress bar |
| ACS_AddDriverProgressBarA11yDesc=Progress bar showing the progress of searching for the driver classes. |
| # Select driver file chooser |
| AddDriver_Chooser_Title=Select Driver |
| AddDriver_Chooser_Filter=Archive Files (*.jar, *.zip) |
| |
| NewConnectionDialogTitle=New Database Connection |
| NewConnectionDriverName=Driver &Name: |
| NewConnectionDisplayName=Displa&y Name (Optional): |
| NewConnectionUserName=&Anv\u00e4ndarnamn: |
| NewConnectionPassword=Pass&word: |
| NewConnectionRememberPassword=&Remember password |
| NewConnectionDatabase=&Database: |
| NewConnectionHost=Hos&t: |
| NewConnectionPort=&Port: |
| NewConnectionServerName=&Server Name: |
| NewConnectionAdditionalProperties=&Additional Props: |
| NewConnectionShowJDBCURL=Show &JDBC URL |
| NewConnectionSID=Service ID (SID): |
| NewConnectionServiceName=Service: |
| NewConnectionTNSName=TNS Name: |
| NewConnectionDSN=DSN: |
| NewConnectionInstanceName=Instance Name: |
| NewCOnnectionInputMode=Data Input &Mode: |
| NewConnectionFieldEntryMode=&Field Entry |
| NewConnectionDirectUrlEntryMode=D&irect URL Entry |
| NewConnectionDirectURL=&JDBC URL: |
| NewConnection.ERR_FieldRequired=Please specify a value for the required field {0} |
| NewConnection.MSG_SelectADriver=Please select a driver from the drop-down list |
| NewConnection.MSG_SpecifyURL=Please specify a JDBC URL for this connection |
| NewConnection.MSG_DuplicateDisplayName=Display name has already been defined |
| ACS_NewConnectionDriverNameA11yDesc=Connection name. |
| ACS_NewConnectionDriverNameComboBoxA11yName=Connection name combo box |
| ACS_NewConnectionDriverClassComboBoxA11yDesc=Combo box containing all driver classes. |
| ACS_NewConnectionDisplayNameA11yDesc=Display name for this connection (optional). |
| ACS_NewConnectionDisplayNameTextFieldA11yName=Display name text field. |
| ACS_NewConnectionUserNameA11yDesc=Database user name. |
| ACS_NewConnectionUserNameTextFieldA11yName=Database user name text field |
| ACS_NewConnectionPasswordA11yDesc=Database password. |
| ACS_NewConnectionPasswordTextFieldA11yName=Database password text field |
| ACS_NewConnectionRememberPasswordA11yDesc=Select this checkbox to remember the password. |
| ACS_NewConnectionDatabaseNameA11yDesc=The database name |
| ACS_NewConnectionDatabaseNameTextFieldA11yName=Database name. |
| ACS_NewConnectionAdditionalPropertiesA11yDesc=Specify additional JDBC properties here. This needs to be in the format expected by this JDBC driver. |
| ACS_NewConnectionAdditionalPropertiesTextFieldA11yName=Additional JDBC properties. |
| ACS_NewConnectionJDBCURLA11yDesc=The JDBC URL for this connection |
| ACS_NewConnectionJDBCURLTextFieldA11yName=Full JDBC URL. |
| ACS_NewConnectionHostA11yDesc=Database server host name. |
| ACS_NewConnectionHostTextFieldA11yName=Database server host name text field |
| ACS_NewConnectionPortA11yDesc=Database server port number. |
| ACS_NewConnectionPortTextFieldA11yName=Database server port number text field |
| ACS_NewConnectionServerNameA11yDesc=Database server name. |
| ACS_NewConnectionServerNameTextFieldA11yName=Database server name text field |
| ACS_NewConnectionSIDA11yDesc=The service id (SID) for the connection |
| ACS_NewConnectionSIDTextFieldA11yName=Database server SID text field |
| ACS_NewConnectionServiceNameA11yDesc=The service name for this connection |
| ACS_NewConnectionServiceNameTextFieldA11yName=Database server service name text field |
| ACS_NewConnectionTNSNameA11yDesc=The TNS name for this connection |
| ACS_NewConnectionTNSNameTextFieldA11yName=Database server TNS text field |
| ACS_NewConnectionDSNA11yDesc=The data source name for this connection |
| ACS_NewConnectionDSNTextFieldA11yName=Database server data source name (DSN) text field |
| ACS_NewConnectionInstanceNameA11yDesc=The instance name for this connection |
| ACS_NewConnectionInstanceNameTextFieldA11yName=Database server instance name text field |
| ACS_NewConnectionFieldEntryModeA11yDesc=Select this mode to enter individual field values. |
| ACS_NewConnectionDirectUrlEntryModeA11yDesc=Select this mode to enter the JDBC URL directly. |
| ACS_NewConnectionShowJDBCURLAllyDesc=Check this to show or hide the JDBC URL |
| |
| # Create table dialog |
| CreateTableName=&Table name: |
| CreateTableUntitledName=Obetitlad |
| CreateTableAddButtonTitle=A&dd column |
| CreateTableEditButtonTitle=&Redigera |
| CreateTableRemoveButtonTitle=&Ta bort |
| CreateTableDialogTitle=Create Table |
| CreateTableMissingTableName=Provide valid table name. |
| CreateTableNoColumns=Add columns to the list. |
| ACS_CreateTableNameA11yDesc=Table name. |
| ACS_CreateTableNameTextFieldA11yName=Table name text field |
| ACS_CreateTableNameTextFieldA11yDesc=Table name. |
| ACS_CreateTableColumnTableA11yName=Table of columns |
| ACS_CreateTableColumnTableA11yDesc=Table of columns and their parameters. |
| ACS_CreateTableAddButtonTitleA11yDesc=Add column to the table. |
| ACS_CreateTableEditButtonTitleA11yDesc=Edit selected column in the table. |
| ACS_CreateTableRemoveButtonTitleA11yDesc=Remove column from the table. |
| ACS_CreateTableDialogA11yDesc=Create table dialog. |
| |
| # Used in CreateTableDialog |
| CreateTable_0=Key |
| CreateTable_1=Index |
| CreateTable_2=Null |
| CreateTable_3=Unique |
| CreateTable_4=Column name |
| CreateTable_5=Data type |
| CreateTable_6=Storlek |
| CreateTable_7=Scale |
| CreateTable_8=Default value |
| CreateTable_9=Kryssa F\u00f6r |
| CreateTable_10=Check constraint |
| |
| # Add table column dialog |
| AddColumnDialogTitle=Add Column |
| AddTableColumnName=&Namn: |
| AddTableColumnType=&Type: |
| AddTableColumnSize=&Storlek |
| AddTableColumnScale=Sc&ale: |
| AddTableColumnDefault=&Default: |
| AddTableColumnConstraintsTitle=Constraints |
| AddTableColumnConstraintPKTitle=&Primary key |
| AddTableColumnConstraintUniqueTitle=&Unique |
| AddTableColumnConstraintNullTitle=Nu&ll |
| AddTableColumnConstraintCheckTitle=&Check: |
| AddTableColumnIndexName=&Index |
| AddTableColumn_EmptyColName=Provide valid column name. |
| AddTableColumn_DefaultOverSize=Default value exceeds size. |
| AddTableColumn_NotVarcharSize=Size for VARCHAR must be greater than 0. |
| AddTableColumn_ScaleOverSize=Scale cannot be bigger than size. |
| AddTableColumn_SizeNotNumber=Size must be a valid number. |
| AddTableColumn_ScaleNotNumber=Scale must be a valid number. |
| |
| ACS_AddTableColumnNameA11yDesc=Column name. |
| ACS_AddTableColumnNameTextFieldA11yName=Column name text field |
| ACS_AddTableColumnNameTextFieldA11yDesc=Column name. |
| ACS_AddTableColumnTypeA11yDesc=Column type. |
| ACS_AddTableColumnTypeComboBoxA11yName=Column type combo box |
| ACS_AddTableColumnTypeComboBoxA11yDesc=Combo box containing all column types. |
| ACS_AddTableColumnSizeA11yDesc=Column size. |
| ACS_AddTableColumnSizeTextFieldA11yName=Column size text field |
| ACS_AddTableColumnSizeTextFieldA11yDesc=Column size. |
| ACS_AddTableColumnScaleA11yDesc=Column scale. |
| ACS_AddTableColumnScaleTextFieldA11yName=Column scale text field |
| ACS_AddTableColumnScaleTextFieldA11yDesc=Column scale. |
| ACS_AddTableColumnDefaultA11yDesc=Default column value. |
| ACS_AddTableColumnDefaultTextFieldA11yName=Default column value text field |
| ACS_AddTableColumnDefaultTextFieldA11yDesc=Default column value. |
| ACS_AddTableColumnConstraintPKTitleA11yDesc=Select this checkbox to mark the column as primary key. |
| ACS_AddTableColumnConstraintUniqueTitleA11yDesc=Select this checkbox to mark the column as unique. |
| ACS_AddTableColumnConstraintNullTitleA11yDesc=Select this checkbox to allow null values for this column. |
| ACS_AddTableColumnIndexNameA11yDesc=Select this checkbox to create a new index. |
| ACS_AddTableColumnCheckTitleA11yDesc=Select this checkbox to add constraints to the column. |
| ACS_AddTableColumnCheckTextAreaA11yName=Constraints text area |
| ACS_AddTableColumnCheckTextAreaA11yDesc=Set constraints for the column in this text area. |
| ACS_AddTableColumnDialogA11yDesc=Add column dialog. |
| |
| # Add index dialog |
| AddIndexTitle=Add Index |
| AddIndexName=&Index name: |
| AddIndexLabel=Select the items you want to add to the index: |
| AddUniqueIndex=Specify type of index: |
| AddIndexUnique=&Unique |
| ACS_AddUniqueIndexA11yDesc=Specify type of index: |
| ACS_AddIndexDialogA11yName=Add Index Dialog |
| ACS_AddIndexDialogA11yDesc=Add index dialog. |
| ACS_AddIndexNameA11yDesc=Name of the index. |
| ACS_AddIndexNameTextFieldA11yName=Index name text field |
| ACS_AddIndexNameTextFieldA11yDesc=Name of the index. |
| ACS_AddIndexLabelA11yDesc=Select the items you want to add to the index: |
| |
| # Add to index dialog |
| ACS_AddToIndexComboA11yName=Available columns combo box |
| ACS_AddToIndexComboA11yDesc=Combo box containing all available columns. |
| ACS_AddToIndexDialogA11yDesc=Add to index dialog. |
| |
| # Add view dialog |
| AddViewTitle=Create View |
| AddViewName=&View name: |
| AddViewLabel=&SQL expression to create view: |
| AddViewMissingViewName=Provide valid view name. |
| AddViewMissingViewCode=Provide valid SQL expression. |
| ACS_AddViewNameA11yDesc=Name of the view. |
| ACS_AddViewNameTextFieldA11yName=Name of the view. |
| ACS_AddViewNameTextFieldA11yDesc=Name of the view. |
| ACS_AddViewLabelA11yDesc=SQL expression to create view. |
| ACS_AddViewTextAreaA11yName=SQL expression text area |
| ACS_AddViewTextAreaA11yDesc=SQL expression to create view. |
| ACS_AddViewDialogA11yDesc=Create view dialog. |
| |
| # Grab and recreate table |
| GrabTableProgressDialogMessage=Grabbing table structure. |
| RecreateTableRenameTable=Name the table |
| RecreateTableNewName=&Namn: |
| RecreateTableRenameNotes=&Create table script: |
| EditCommand=&Edit table script |
| ReloadCommand=&Reload table script from file |
| ACS_RecreateTableNewNameA11yDesc=Table name. |
| ACS_RecreateTableNewNameTextFieldA11yName=Table Name |
| ACS_RecreateTableNewNameTextFieldA11yDesc=Table name. |
| ACS_RecreateTableRenameNotesA11yDesc=Create table script. |
| ACS_RecreateTableTableScriptTextAreaA11yName=Table Script |
| ACS_RecreateTableTableScriptTextAreaA11yDesc=SQL command to create this table. |
| ACS_EditCommandA11yDesc=Click to edit SQL command to create this table. |
| ACS_ReloadCommandA11yDesc=Click to reload table script from file. |
| ACS_RecreateTableDialogA11yDesc=Recreate table dialog. |
| |
| # defaults for generated form values for LabeledTextFieldDialog |
| LabeledTextFieldDialog.titleLabel.text=xxxxx |
| LabeledTextFieldDialog.editButton.text=xxxxx |
| LabeledTextFieldDialog.descLabel.text=xxxxxxx |
| LabeledTextFieldDialog.textField.text= |
| |
| EXC_UnableToOpenStream=unable to open stream {0} |
| ERR_UnableToCreateTable=Unable to create table. |
| ERR_UnableToAddColumn=Unable to add column. |
| ERR_UnableToAddIndex=Unable to add index. |
| ERR_UnableToCreateView=Unable to create view. |
| |
| TXT_NoSchema=<No schema> |
| |
| # Connect dialog |
| |
| BasePanelTitle=Basic setting |
| ExtendPanelTitle=Avancerat |
| BasePanelHint=Basic set of arguments to create database connection |
| ExtendPanelHint=Selection of database schema to use in the connection |
| ConnectDialogTitle=Connect |
| ConnectDialogUserName=&User name\: |
| ConnectDialogPassword=&Password\: |
| ConnectDialogRememberPassword=&Remember password |
| ACS_ConnectDialogA11yName=Database connect |
| ACS_ConnectDialogA11yDesc=Database connect dialog |
| |
| ACS_ConnectDialogUserNameA11yDesc=Database user name. |
| ACS_ConnectDialogUserNameTextFieldA11yName=Database user name text field |
| ACS_ConnectDialogUserNameTextFieldA11yDesc=Database user name. |
| ACS_ConnectDialogPasswordA11yDesc=Database password. |
| ACS_ConnectDialogPasswordTextFieldA11yName=Database password text field |
| ACS_ConnectDialogPasswordTextFieldA11yDesc=Database password. |
| ACS_ConnectDialogRememberPasswordA11yDesc=Select this checkbox to remember the password. |
| |
| ACS_ConnectionProgressBarA11yName=Connection progress bar |
| ACS_ConnectionProgressBarA11yDesc=Progress bar showing the progress of connecting to the database. |
| SchemaDialogText=&Select schema\: |
| MSG_SchemaPanelComment=For each database connection, the Services window only displays objects from one database schema. \nSelect the schema of the tables to be displayed. |
| |
| ACS_SchemaDialogTextA11yDesc=Select a database schema to use. |
| ACS_SchemaDialogTextComboBoxA11yName=Schema combo box |
| ACS_SchemaDialogTextComboBoxA11yDesc=Combo box containing all available schemas. |
| ACS_SchemaPanelCommentA11yName=Schema panel description |
| ACS_SchemaPanelCommentA11yDesc=Select a database schema to use. |
| ACS_GetSchemasPanelA11yName=Select a database schema tab panel |
| ACS_GetSchemasPanelA11yDesc=Tab panel enabling to select a database schema |
| |
| # ConnectProgressDialog |
| |
| LBL_Connecting=Connecting to database, please wait... |
| |
| #Connection Progress |
| ConnectionProgress_Connecting=Connecting to database... |
| ConnectionProgress_Established=Connection established. |
| ConnectionProgress_Failed=Connection failed. |
| ViewProcedureDialog.lName.text=&Namn: |
| ViewProcedureDialog.lParams.text=&Parameters: |
| ViewProcedureDialog.lBody.text=&Source: |
| ViewProcedureDialog_Title=Store Procedure Source |
| |
| CreateConnectionWizard=Create new connection |
| OracleConnectionName=Create New Connection to Oracle Database |
| MySQLConnectionName=Create New Connection to MySQL Database |
| ChoosingDriverUI.Name=Locate Driver |
| ConnectionPanel.Name=Customize Connection |
| ChoosingDriverInterUI.lDownloadInfo1.text.found={0} driver can be downloaded |
| ChoosingDriverInterUI.lFound1.text.not.found={0} driver not found. |
| |
| |
| ChoosingSchemaPanel.Name=Choose Database Schema |
| #oracle.from=http://www.oracle.com/technetwork/database/enterprise-edition/jdbc-112010-090769.html |
| #mysql.from=http://dev.mysql.com/downloads/connector/j/ |
| #oracle.driver.name.prefix=ojdbc6.jar, ojdbc6_g.jar, ojdbc6dms.jar |
| #mysql.driver.name.prefix=mysql-connector-java |
| #oracle.driver.name=ojdbc6.jar |
| #mysql.driver.name=mysql-connector-java-5.1.13-bin.jar |
| ChoosingDriverInterUI.locateDriver=Select {0} driver |
| ChoosingDriverInterUI.errorMessage.DriverNotFound=Specify location of {0} driver. |
| PredefinedWizard.WizardTitle=New Connection Wizard |
| |
| # Oracle |
| # Thin |
| #OracleThinDriverName=OracleThin |
| #OracleThinDriverDisplayName=Oracle Thin |
| #OracleThinDriverClass=oracle.jdbc.OracleDriver |
| #OracleThinDatabaseUrl=jdbc:oracle:thin:@localhost:1521:XE |
| |
| # OCI |
| #OracleOCIDriverName=OracleOCI |
| #OracleOCIDriverDisplayName=Oracle OCI |
| #OracleOCIDriverClass=oracle.jdbc.driver.OracleDriver |
| #OracleOCIDatabaseUrl=jdbc:oracle:oci8:@localhost:1521:XE |
| |
| #OracleSampleUser=hr |
| #OracleSamplePassword=hr |
| |
| # MySQL |
| #MySQLDriverName=MySQL |
| #MySQLDriverDisplayName=MySQL (Connector/J driver) |
| #MySQLDriverClass=com.mysql.jdbc.Driver |
| #MySQLSampleUser=root |
| #MySQLSamplePassword= |
| #MySQLSampleDatabaseUrl=jdbc:mysql://localhost:3306/mysql |
| ChoosingDriverUI.lDrivers.text=&Driver: |
| NewConnectionPanel.ConnectionPassed=Connection Succeeded. |
| AddDriverDownloadMissingFile=<html>Driver File is missing. Download from <a href="{0}">{0}</a>. <i>Use preferred </i>{1}.</html> |
| AddDriverDialog_NotPrivilegedDriver=Selected {0} might cause unexpected problems. Use preferred {1}. |
| NewConnectionPanel.bTestConnection=Test &Connection |
| NewConnectionWizard.bTestConnection.ACD=I/T |
| ACD_ChoosingDriverUI=I/T |
| ACD_NewConnectionPanel=I/T |
| ViewProcedureDialog.tfName.ACD=Name of stored procedure |
| ViewProcedureDialog.taParams.ACD=Parameters of stored procedure |
| ViewProcedureDialog.taBody.ACD=Source code of stored procedure |
| |