| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2009 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| CTL_SettingsFile=Arquivo de Defini\u00e7\u00f5es |
| # {0} - the path |
| EXC_FIND_4_INVALID=O arquivo {0} n\u00e3o \u00e9 mais v\u00e1lido! |
| EXC_NO_LONGER_VALID=O arquivo copiado {0} n\u00e3o \u00e9 mais v\u00e1lido! |
| # {0} - File name |
| LBL_Copying=Copiando {0} |
| # {0} - Deleted file or folder |
| LBL_Deleting=Excluindo {0} |
| # {0} - File name |
| LBL_Moving=Movendo {0} |
| # Text appended to action name so that it is clear that the action |
| # will be invoked on parent node. For example: |
| # Paste -> Copy (to parent); Paste -> Refactory Copy... (to parent) |
| # Please note the leading space. |
| LBL_PasteToParent=\ (para pai) |
| OpenIDE-Module-Name=API dos Sistemas de dados |
| OpenIDE-Module-Short-Description=Open API do NetBeans para tratamento de objetos de dados. |
| OpenIDE-Module-Long-Description=A API dos Sistemas de dados \u00e9 uma camada sobre a API dos Sistemas de arquivos que reconhece e agrupa objetos de dados e d\u00e1 a eles sem\u00e2nticas particulares. Antigamente parte da Open API comum, agora, ela est\u00e1 dividida em um m\u00f3dulo independente. |
| OpenIDE-Module-Display-Category=Infraestrutura |
| |
| #DefaultDataObject |
| HINT_DefaultDataObject=Arquivo N\u00e3o Reconhecido |
| |
| EXC_SharedAccess=Acesso compartilhado |
| |
| #Folder.Index |
| EXC_ReorderFailed=N\u00e3o \u00e9 poss\u00edvel salvar nova ordena\u00e7\u00e3o. |
| |
| # {0} - folder that cannot be deleted |
| EXC_CannotDelete2=N\u00e3o \u00e9 poss\u00edvel excluir o arquivo {0}. |
| |
| # name for shadow of an object |
| # {0} real name of the shadow |
| # {1} real name of the original |
| # {2} full name of shadow file |
| # {3} full name of original file |
| # {4} display name of original node |
| FMT_shadowName={0} (\u2192) |
| |
| # name for shadow of an object |
| # {0} real name of the shadow |
| # {1} real name of the original |
| # {2} full name of shadow file |
| # {3} full name of original file |
| FMT_shadowHint=Link para {3} |
| |
| PROP_ShadowOriginalName=Nome Original |
| HINT_ShadowOriginalName=Nome do objeto a que este link se refere. |
| PROP_ShadowOriginalFileSystem=Nome do Sistema de Arquivos Original |
| HINT_ShadowOriginalFileSystem=Nome do Sistema de Arquivos do objeto original. |
| |
| # DataNode |
| PROP_name=Nome |
| HINT_name=Nome deste objeto. |
| PROP_template=Modelo |
| HINT_template=Se 'verdadeiro', este objeto \u00e9 um modelo (pode criar inst\u00e2ncias dele mesmo). |
| PROP_files=Todos os Arquivos |
| HINT_files=Uma lista de arquivos representados por este objeto. |
| PROP_size=Tamanho do Arquivo |
| HINT_size=Tamanho deste arquivo, em bytes. (Somente aplic\u00e1vel ao primeiro arquivo listado em 'Todos os arquivos'.) |
| PROP_lastModified=Hora da Modifica\u00e7\u00e3o |
| HINT_lastModified=Quando este arquivo foi modificado pela \u00faltima vez. (Somente aplic\u00e1vel ao primeiro arquivo listado em 'Todos os arquivos'.) |
| PROP_extension=Extens\u00e3o |
| HINT_extension=Extens\u00e3o do arquivo principal. |
| ERROR_extension=N\u00e3o \u00e9 poss\u00edvel alterar a extens\u00e3o. O arquivo est\u00e1 modificado. |
| |
| # name of set with sorting options |
| PROP_sorting=Classifica\u00e7\u00e3o |
| HINT_sorting=Determina como os objetos em um pacote devem ser ordenados. |
| |
| # |
| # folder sort mode property |
| PROP_sort=Modo de Classifica\u00e7\u00e3o |
| HINT_sort=Determina como objetos em um pacote deveriam ser ordenados. |
| # SortModeEditor |
| VALUE_sort_none=N\u00e3o classificado |
| VALUE_sort_names=Por Nome |
| VALUE_sort_class=Por Classe |
| VALUE_sort_folder_names=Por Nome (Pacotes Primeiro) |
| VALUE_sort_last_modified=Por Hora de Modifica\u00e7\u00e3o |
| VALUE_sort_size=Por Tamanho de Arquivo |
| VALUE_sort_extensions=Por Extens\u00e3o |
| VALUE_sort_natural=Naturalmente por Nome |
| |
| |
| # |
| # Names of paste types |
| # |
| PT_move=&Mover |
| PT_copy=&Copiar |
| PT_instantiate=Criar &Inst\u00e2ncia |
| PT_shadow=Criar &Link |
| PT_serialize=&Serializar |
| PT_instance=Inst\u00e2ncia pa&dr\u00e3o |
| |
| # |
| SerializeBean_Text=&Nome do arquivo para serializar a inst\u00e2ncia |
| SerializeBean_Title=Serializa\u00e7\u00e3o de Inst\u00e2ncia |
| |
| # |
| # new folder |
| # |
| CTL_NewFolder=Pasta |
| CTL_NewFolderName=&Nome: |
| CTL_NewFolderTitle=Criar Nova Pasta |
| |
| |
| # formatting of error message when creating a folder and a file of given name already exists there |
| # {0} name of the new folder being created |
| # {1} name of the folder the new folder is being created in |
| MSG_FMT_FileExists=O arquivo {0} j\u00e1 existe na pasta {1}. |
| |
| # formatting of error message when creating a folder and a folder with specified name already exists there |
| # {0} name of the new folder being created |
| # {1} name of the folder the new folder is being created in |
| MSG_FMT_FolderExists=A pasta {0} j\u00e1 existe na pasta {1}. |
| |
| # when the object is larger than size expected to fit into memory |
| # {0} path to the file |
| # {1} name of the file |
| # {2} size in bytes |
| # {3} size in Kb |
| # {4} size in Mb |
| # {5} size in Gb |
| MSG_ObjectIsTooBig=O arquivo {1} parece ser muito grande ({2,choice,0#{2}b|1024#{3} Kb|1100000#{4} Mb|1100000000#{5} Gb}) para abrir com seguran\u00e7a. \nAbrir este arquivo poder\u00e1 causar um erro OutOfMemoryError, o que tornaria o IDE inutiliz\u00e1vel. Tem certeza de que deseja abri-lo? |
| |
| |
| |
| # XMLDataObject |
| PROP_XmlLoader_Name=Arquivos de Configura\u00e7\u00e3o XML |
| PROP_XmlError=Erro (recuper\u00e1vel) |
| PROP_XmlWarning=Advert\u00eancia |
| PROP_XmlFatalError=Erros Fatais |
| ###PROP_XmlMessage=#{0} \"{1}\" [{2}:{3},{4}] |
| |
| # ^^^ formatting of xml parser error message |
| # {0} level of error (PROP_Xml[Error|Warning|FatalError]) |
| # {1} error message |
| # {2} system ID of xml document |
| # {3} line number |
| # {4} column number |
| |
| # DataFolder |
| EXC_WrongName=N\u00e3o \u00e9 poss\u00edvel criar a pasta; {0} n\u00e3o \u00e9 um nome v\u00e1lido. |
| |
| # {0} name of folder that can't be copied. |
| EXC_CannotCopyTheSame=N\u00e3o \u00e9 poss\u00edvel copiar {0}: a pasta de destino \u00e9 a igual \u00e0 pasta de origem. |
| # {0} name of folder that can't be copied. |
| EXC_CannotCopySubfolder=N\u00e3o \u00e9 poss\u00edvel copiar {0}: a pasta de destino \u00e9 uma subpasta da pasta de origem. |
| |
| #Title of the new from template dialog |
| # {0} = object which will be created |
| CTL_TemplateTitle2=Novo Assistente - {0} |
| #Title of the new from template dialog |
| # Object is not known. Used when template chooser panel is shown. |
| CTL_TemplateTitle=Novo Assistente |
| LAB_TemplateChooserPanelName=Escolha o modelo |
| LAB_SelectTemplateBorder=&Selecione um Modelo: |
| MSG_NoDescription=Sem descri\u00e7\u00e3o |
| MSG_InitDescription=Inicializando descri\u00e7\u00e3o... |
| LAB_TemplateDescriptionBorder=Descri\u00e7\u00e3o do &Modelo: |
| LAB_TargetLocationPanelName=Local de Destino |
| LAB_TargetLocationDescription=Selecione uma pasta para o objeto rec\u00e9m-criado ou digite o nome da pasta abaixo: |
| |
| |
| |
| |
| CTL_NewObjectName=&Nome: |
| |
| |
| |
| |
| |
| |
| LBL_settingsNodeName=Defini\u00e7\u00f5es |
| EXC_folder_delete_failed=N\u00e3o foi poss\u00edvel remover a pasta de origem ao mov\u00ea-la. |
| #{0} = display name of the filesystem |
| FMT_TemplateDefaultRootFolderName=<pasta superior> [{0}] |
| FMT_DefaultNewObjectName=<nome padr\u00e3o> |
| |
| LBL_shadow_loader_display_name=Links |
| LBL_folder_loader_display_name=Pastas |
| LBL_default_loader_display_name=Objetos Desconhecidos |
| LBL_instance_loader_display_name=Inst\u00e2ncias de A\u00e7\u00e3o |
| |
| FMT_CannotCopyDo=Advert\u00eancia: o objeto {0} n\u00e3o pode ser copiado. |
| FMT_CannotMoveDo=Advert\u00eancia: o objeto {0} n\u00e3o pode ser movido. |
| |
| # InstanceDataObject |
| LBL_separator_instance=(separador) |
| PROP_instance_class=Nome da Classe |
| HINT_instance_class=Nome da classe Java do objeto que est\u00e1 sendo representado. |
| # {0} class name of bean to save |
| # {1} file to save the bean to |
| EXC_CannotSaveBean=Existem problemas ao salvar o bean {0}. |
| |
| FMT_brokenShadowName={0} (Link Quebrado) |
| HINT_brokenShadowOriginalName=Link Quebrado |
| PROP_brokenShadowOriginalName=Link Quebrado |
| # what does Broken Link Filesystem refer to? Broken link to the filesystem? pkeegan |
| PROP_brokenShadowFileSystem=Link para Sistema de Arquivos Quebrado |
| HINT_brokenShadowFileSystem=Link para Sistema de Arquivos Quebrado |
| ##InstanceDataObject.Depricated |
| LBL_BrokenSettings=<Defini\u00e7\u00e3o irreconhec\u00edvel> |
| |
| # human readable names, not shown anywhere |
| LBL_DOcopy=Copiar Tipo do Objeto de Dados |
| LBL_DOcut=Recortar Tipo do Objeto de Dados |
| #NewObjectPanel |
| LAB_NewObjectPanelName=Novo Nome de Objeto |
| FMT_DefaultNewObject=<padr\u00e3o> |
| |
| # DataLoader |
| # {0} - name of loader affected |
| EXC_missing_actions_in_loader=O menu pop-up para objetos do tipo {0} n\u00e3o p\u00f4de ser restaurado; usando defini\u00e7\u00f5es padr\u00e3o. |
| LBL_loader_display_name=Carregador |
| |
| MSG_renameError=Este objeto n\u00e3o pode ser renomeado de {0} para {1}. |
| MSG_NotValidName=N\u00e3o \u00e9 poss\u00edvel dar um nome vazio a {0}. |
| ERR_NoFilesystem=Nenhum sistema de arquivos ativado. Tenha certeza de que voc\u00ea tem pelo menos um sistema de arquivos que n\u00e3o \u00e9 somente leitura e que n\u00e3o esteja oculto. |
| |
| # TemplateWizardPanel2 |
| MSG_fs_or_folder_does_not_exist=O sistema de arquivos de destino n\u00e3o existe. |
| MSG_fs_is_readonly=O sistema de arquivos de destino \u00e9 somente para leitura. |
| # {0} - name of the existing file |
| MSG_file_already_exist=O arquivo {0} j\u00e1 existe. |
| |
| |
| |
| # |
| # Messages for org.openide.actions in openide-loaders.jar |
| # |
| ACT_FileSystemAction=A\u00e7\u00e3o do Sistema de Arquivos |
| #InstantiateAction |
| Instantiate=Criar &Inst\u00e2ncia |
| #SaveAsTemplateAction |
| SaveAsTemplate=Salvar como Modelo... |
| Title_SaveAsTemplate=Salvar como Modelo... |
| CTL_SaveAsTemplate=&Selecione a categoria na qual o novo modelo aparecer\u00e1: |
| CTL_SaveAsTemplate_TemplatesRoot=Modelos |
| SaveAll=S&alvar Tudo |
| HINT_SaveAll=Salvar todos os arquivos (se a funcionalidade Compilar ao Salvar estiver ativada, essa opera\u00e7\u00e3o tamb\u00e9m compilar\u00e1/construir\u00e1 seus arquivos) |
| # FileSystemRefreshAction |
| LAB_Refresh=Atualizar Pasta |
| # NewTemplateAction |
| EXC_TemplateFailed=A cria\u00e7\u00e3o do objeto partindo do modelo falhou. |
| NewTemplate=&Novo |
| NewTemplateAction=Todos os Modelos... |
| |
| |
| # |
| # Messages for org.openide.awt in openide-loaders.jar |
| # |
| CTL_EmptyMenu=Vazio |
| |
| |
| |
| |
| # |
| # Messages for org.openide.text in openide-loaders.jar |
| # |
| |
| |
| # DataEditorSupport |
| |
| # {0} = name of the data object |
| # {1} = file name with package |
| CTL_ObjectOpen=Abrindo {0} ... |
| |
| # {0} = name of the data object |
| MSG_SaveFile=O arquivo {0} foi modificado. Deseja salv\u00e1-lo? |
| |
| # messages for editor support |
| |
| # {0} = 0 if readonly, 1 if modified, 2 if modified and readonly!, 3 otherwise |
| # {1} name of the file |
| |
| TIP_editor_modified=\ (modificado) |
| TIP_editor_ro=\ (somente para leitura) |
| |
| # format to create default display name for a line |
| # {0} simple name of file |
| # {1} full name of file |
| # {2} line number |
| |
| |
| # DataEditorSupport |
| # Cases when modified source file was changed to [read-only] |
| MSG_FileReadOnlyClosing=O arquivo {0} foi alterado para somente leitura! Todas as altera\u00e7\u00f5es ser\u00e3o descartadas. |
| MSG_FileReadOnlySaving=O arquivo {0} foi alterado para somente leitura! N\u00e3o \u00e9 poss\u00edvel salv\u00e1-lo. |
| MSG_FileReadOnlyChanging=O arquivo {0} foi alterado para somente leitura! |
| |
| |
| MSG_BinaryFileQuestion=Este arquivo parece conter dados bin\u00e1rios. Tem certeza que deseja abr\u00ed-lo no editor de texto? |
| MSG_BinaryFileWarning=Arquivo Bin\u00e1rio Detectado |
| |
| CTL_SaveAsAction=Sal&var como... |
| MSG_SaveAsFailed=Houve alguns problemas ao salvar {0}\nCausa: {1} |
| LBL_SaveAsTitle=Salvar como |
| MSG_CannotCreateTargetFolder=N\u00e3o \u00e9 poss\u00edvel criar a pasta de destino. |
| MSG_SaveAs_SameFileSelected=Selecione outro nome de arquivo. |
| MSG_SaveAs_SameFileSelected_Title=Salvar como |
| MSG_SaveAs_OverwriteQuestion=Tem certeza que deseja substituir {0}? |
| MSG_SaveAs_OverwriteQuestion_Title=Salvar como |
| |
| MSG_EncodingProblem=N\u00e3o \u00e9 poss\u00edvel abrir o arquivo {1} de forma segura com a codifica\u00e7\u00e3o {0}. Deseja continuar a abri-lo? |
| |
| CTL_Source=C\u00f3digo-Fonte |
| |
| # {0} - file to lock |
| MSG_MarkModified=Bloqueando {0} |
| # {0} - file to lock |
| MSG_MarkModifiedCancel=O bloqueio de {0} foi cancelado |
| |