| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| CTL_CloseAllProjectsAction=Fechar Todos os Projetos |
| CTL_CloseOtherProjectsAction=&Fechar Outros Projetos |
| ERR_InvalidProject=O projeto n\u00e3o \u00e9 v\u00e1lido ou foi exclu\u00eddo |
| LBL_NewFileAction_File_PopupName=Outros |
| LBL_NewFileAction_Name=&Novo Arquivo... |
| LBL_NewFileAction_PopupName=Novo |
| # {0} - Name of the template |
| |
| LBL_NewFileAction_Tooltip=Novo Arquivo... |
| LBL_NewProjectAction_Name=No&vo Projeto... |
| LBL_NewProjectAction_Tooltip=Novo Projeto... |
| LBL_NodeNewProjectAction_Name=No&vo Projeto... |
| LBL_NoneMainProject_Name=&Nenhum |
| LBL_OpenProjectAction_Name=Abrir Proj&eto... |
| LBL_OpenProjectAction_Tooltip=Abrir Projeto... |
| LBL_NodeOpenProjectAction_Name=Abrir Projeto... |
| LBL_CloseProjectAction_Name=&Fechar {0,choice,0#Projeto|1#Projeto ({1})|1<{0} Projetos} |
| LBL_CloseProjectAction_Popup_Name=Fechar {0,choice,0#|1#|1<{0} Projetos} |
| LBL_CustomizeProjectAction_Name={0,choice,0#Proprie&dades|1#Proprie&dades |1<Projeto} do Projeto ({1}) |
| LBL_CustomizeProjectAction_Popup_Name=Propriedades |
| LBL_OpenSubprojectsAction_Name=Abrir Projetos Necess\u00e1rios |
| LBL_RecentProjectsAction_Name=Abrir Projeto Recente |
| LBL_SaveProjectAction_Name=Salvar Projeto |
| |
| # {0} number of project |
| # {1} the first project name |
| LBL_BuildProjectAction_Name=Construir {0,choice,0#Projeto|1#Projeto ({1})|1<{0} Projetos} |
| LBL_BuildProjectAction_Name_popup=Construir |
| LBL_CleanProjectAction_Name=Limpar {0,choice,0#Projeto|1#Projeto ({1})|1<{0} Projetos} |
| LBL_CleanProjectAction_Name_popup=Limpar |
| LBL_RebuildProjectAction_Name=Limpar e Construir {0,choice,0#Projeto|1#Projeto ({1})|1<{0} Projetos} |
| LBL_RebuildProjectAction_Name_popup=Limpar e Construir |
| LBL_JavadocProjectAction_Name=&Gerar Javadoc{0,choice,0#|1# ({1})|1< {0} Projetos} |
| LBL_JavadocProjectAction_Name_popup=Gerar Javadoc |
| LBL_RunProjectAction_Name=Executar {0,choice,0#Projeto|1#"{1}" Projeto|1<{0} Projetos} |
| LBL_RunProjectAction_Name_popup=Executar |
| LBL_SelectInFilesAction_MainMenuName=Sele&cionar nos Arquivos |
| LBL_SelectInProjectsAction_MainMenuName=Selecionar no Pro&jetos |
| LBL_SetAsMainProjectAction_Name=Definir como Projeto Principal |
| LBL_SetMainProjectAction_Name=Definir Projeto Principal |
| LBL_SubProjectPopupMenu_Initializing=Inicializando... |
| LBL_TestProjectAction_Name=&Testar {0,choice,0#Projeto|1#Projeto ({1})|1<{0} Projetos} |
| LBL_TestProjectAction_Name_popup=Testar |
| LBL_CompileSingleAction_Name=Compi&lar {0,choice,0#Arquivo|1#Arquivo|1<Arquivos} |
| LBL_StopBuildingAction_Name=&Interromper Constru\u00e7\u00e3o |
| LBL_DeleteProjectAction_Name=Excluir |
| LBL_CopyProjectAction_Name=Copiar... |
| LBL_MoveProjectAction_Name=Mover... |
| LBL_RenameProjectAction_Name=Renomear... |
| |
| # Names of main project actions |
| # {0} - # of selected projects (0 if disabled), or -1 if main project |
| # {1} - project name, if exactly one project |
| LBL_BuildMainProjectAction_Name=&Construir {0,choice,-1#Projeto Principal|0#Projeto|1#Projeto ({1})|1<{0} Projetos} |
| LBL_CleanMainProjectAction_Name=Limpar {0,choice,-1#Projeto Principal|0#Projeto|1#Projeto ({1})|1<{0} Projetos} |
| LBL_RebuildMainProjectAction_Name=&Limpar e Construir {0,choice,-1#Projeto Principal|0#Projeto|1#Projeto ({1})|1<{0} Projetos} |
| LBL_RunMainProjectAction_Name=&Executar {0,choice,-1#Projeto Principal|0#Projeto|1#Projeto ({1})|1<{0} Projetos} |
| |
| |
| # Name of 1-off actions |
| # {0} - # of selected files |
| LBL_RunSingleAction_Name=Executar &Arquivo |
| # {0,choice,0#File|1#"{1}"|1<Files} |
| LBL_TestSingleAction_Name=T&estar {0,choice,0#Arquivo|1#Arquivo|1<Arquivos} |
| #{0,choice,0#File|1#"{1}"|1<Files} |
| |
| LBL_UnSetAsMainProjectAction_Name=Cancelar Defini\u00e7\u00e3o como Projeto Principal |
| MainProjectAction.no_main=Definir um projeto principal ou selecionar um projeto ou arquivo do projeto ou manter um projeto aberto. |
| |
| |
| # OpenProject.java |
| MSG_notProjectDir=O diret\u00f3rio n\u00e3o cont\u00e9m nenhum projeto. |
| |
| |
| ActiveConfigAction.label=Definir Co&nfigura\u00e7\u00e3o do Projeto |
| ActiveConfigAction.context.label=Definir Configura\u00e7\u00e3o |
| ActiveConfigAction.customize=&Personalizar... |
| |
| NewFile.please_wait=Aguarde... |
| OpenProjectFolderAction.LBL_action=Abrir Projeto da Pasta |
| OpenProjectMenu.Nothing=Nada |
| OpenProjectMenu.Open_All_Projects=A&brir Todos os Projetos |
| # {0} - URL to project directory |
| STATUS_loading_recent=Carregando projeto em {0}... |
| # UI Logging |
| # |
| # UI logging of button press |
| # {0} instance of the button |
| # {1} class of the button |
| # {2} instance of the action |
| # {3} class of the action |
| # {4} display name of the action |
| UI_ACTION_BUTTON_PRESS=Chamando {4} implementado como {3} por meio de {1} |
| |
| # {0} class of the action |
| # {1} project type |
| # {2} action name |
| PROJECT_ACTION=A\u00e7\u00e3o {2} no projeto {1} atrav\u00e9s de {0} |
| |
| # regular logging, refreshing lookup |
| # {0} = class |
| # {1} = lookup |
| LOG_ACTION_REFRESH=Atualizando a A\u00e7\u00e3o {0} de {1} |
| |
| CustomizeProject.save_modified_files=Salve os arquivos modificados do projeto antes de configurar as propriedades do projeto. |
| CustomizeProject.saveAll=Salvar Tudo |
| CustomizeProject.save_modified_title=Salvar arquivos modificados |
| |
| |
| # RunLastBuildAction |
| LBL_RunLastBuildAction_general=&Repetir Constru\u00e7\u00e3o/Execu\u00e7\u00e3o |
| # {0} - display name of previous build |
| TIP_RunLastBuildAction_specific=Repetir Constru\u00e7\u00e3o/Execu\u00e7\u00e3o: {0} |
| # {0} - display name of previous build |
| LBL_RunLastBuildAction_specific=Re&petir Constru\u00e7\u00e3o/Execu\u00e7\u00e3o: {0} |
| |
| # StopBuildingAction |
| LBL_stop_building=Interromper Con&stru\u00e7\u00e3o/Execu\u00e7\u00e3o |
| # {0} - display name of previous build |
| LBL_stop_building_one=&Interromper Constru\u00e7\u00e3o/Execu\u00e7\u00e3o: {0} |
| LBL_stop_building_many=&Interromper Constru\u00e7\u00e3o/Execu\u00e7\u00e3o... |
| LBL_SBA_intro=Est\u00e3o sendo executados simultaneamente v\u00e1rios processos de constru\u00e7\u00e3o/execu\u00e7\u00e3o. |
| LBL_SBA_select=&Selecione os processos a serem interrompidos: |
| TITLE_SBA=Interromper Constru\u00e7\u00e3o/Execu\u00e7\u00e3o |
| LBL_SBA_stop=Interromper |
| |
