| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2007 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| # Tab titles for make execution |
| # {0} - List of targets |
| #TITLE_MakeTarget=make {0} |
| #TITLE_MakeDefaultTarget=make |
| TITLE_output_reused=Make Execution |
| |
| # Build messages |
| MSG_BuildStarted=Running Make... |
| MSG_BuildFinishedOK=Build Successful |
| MSG_BuildFailed=Build Failed |
| # {0} - minutes |
| # {1} - seconds |
| MSG_BuildTimer=Total time: {0, choice, 0#| 1#1 minute | 2#{0} minutes }{1, choice, 0#0 seconds| 1#1 second| 2#{1} seconds} |
| |
| # OutputWindowOutputStream |
| ERR_unknown=Erro desco\u00f1ecido |
| # {0} - file name where error occurred |
| # {1} - text of error |
| MSG_err={0} {1} |
| # {0} - file name where error occurred |
| # {1} - text of error |
| # {2} - line number |
| MSG_err_line={0} [{2}] {1} |
| # {0} - file name where error occurred |
| # {1} - text of error |
| # {2} - line number |
| # {3} - column number |
| MSG_err_line_col={0} [{2}:{3}] {1} |
| # {0} - file name where error occurred |
| # {1} - text of error |
| # {2} - line number |
| # {3} - start column number |
| # {4} - end column number |
| MSG_err_line_col_col={0} [{2}:{3}-{4}] {1} |
| # {0} - file name where error occurred |
| # {1} - text of error |
| # {2} - start line number |
| # {3} - start column number |
| # {4} - end line number |
| # {5} - end column number |
| MSG_err_line_col_line_col={0} [{2}:{3}-{4}:{5}] {1} |
| |
| # ErrorExpressionPanel strings |
| CTL_Error_description_name=Error Description Name |
| CTL_Add=Engadir |
| CTL_Add_tip=Add current settings as a new preset |
| CTL_Remove=Eliminar |
| CTL_Remove_tip=Remove selected error description from the preset list |
| CTL_Change=Cambiar |
| CTL_Change_tip=Change the selected preset |
| CTL_Error_label=Error Expression: |
| CTL_Preset_label=Preset Name: |
| CTL_File_label=File Position (backreference #): |
| CTL_Line_label=Line Position (backreference #): |
| CTL_Column_label=Column Position (backreference #): |
| CTL_Description_label=Message Position (backreference #): |
| |
| # Properties used in MakeExecSupport |
| PROP_BUILD_DIRECTORY=Build Directory |
| HINT_BUILD_DIRECTORY=Select which directory this Makefile should be executed from |
| |
| PROP_EXECUTION=Make Executor |
| HINT_EXECUTION=Select which executor will serve as the default for building from a Makefile |
| |
| PROP_MAKE_COMMAND=Orde Make |
| HINT_MAKE_COMMAND=Select the name or path of the make command you want to run |
| |
| PROP_MAKE_OPTIONS=Make Options |
| HINT_MAKE_OPTIONS=Sets command-line options to be included while building this Makefile |
| |
| PROP_MAKE_TARGET=Make Obxectivo |
| HINT_MAKE_TARGET=Selects the default target to use if no explicit target is chosen |
| |
| PROP_MAKE_TARGETS=Make Targets |
| HINT_MAKE_TARGETS=List of make targets (comma separated) |
| |
| PROP_MAKE_ENVIRONMENT=Contorno |
| HINT_MAKE_ENVIRONMENT=Vari\u00e1beis de contorno |
| |
| MSG_CANT_SET_BUILD_DIRECTORY=Cannot set the build directory |
| MSG_CANT_SET_MAKE_COMMAND=Cannot set the make command for {0} |
| MSG_CANT_SET_MAKE_OPTIONS=Cannot set the make options for {0} |
| MSG_CANT_SET_MAKE_TARGETS=Cannot set the make target for {0} |
| |
| HINT_MakeProcessDescriptor=See the make(1) man page for details |
| |
| # String for MakeExecutor and its BeanInfo |
| PROP_MakeExecutorBean=Make Execution |
| HINT_MakeExecutorBean=Runs the make command on a Makefile |
| |
| # MakeExecutor |
| # EXC_NotAMakefile: |
| # {0} - data object display name |
| # {1} - data loader display name |
| # {2} - executor name |
| EXC_NotAMakefile=You cannot use {2} on {0} because it is an object of type {1}. Make executors may only be used on Makefiles. Please see the online help for further explanation. |
| |
| TARGET_DIALOG_TITLE=Obxectivo |
| |
| TARGET_EDITOR_TITLE=Make Targets |
| TARGET_EDITOR_LIST_LBL=&List of targets: |
| TARGET_EDITOR_LIST_MNEMONIC=L |
| TARGET_EDITOR_ADD_BUTTON_LBL=Eng&adir |
| TARGET_EDITOR_ADD_BUTTON_MNEMONIC=A |
| TARGET_EDITOR_CHANGE_BUTTON_LBL=Re&name |
| TARGET_EDITOR_CHANGE_BUTTON_MNEMONIC=n |
| TARGET_EDITOR_REMOVE_BUTTON_LBL=Elimina&r |
| TARGET_EDITOR_REMOVE_BUTTON_MNEMONIC=R |
| TARGET_EDITOR_UP_BUTTON_LBL=&Arriba |
| TARGET_EDITOR_UP_BUTTON_MNEMONIC=U |
| TARGET_EDITOR_DOWN_BUTTON_LBL=&Down |
| TARGET_EDITOR_DOWN_BUTTON_MNEMONIC=D |
| TARGET_EDITOR_OK_BUTTON_LBL=Aceptar |
| TARGET_EDITOR_CANCEL_BUTTON_LBL=Cancelar |
| TARGET_EDITOR_CANCEL_BUTTON_MNEMONIC=C |
| |
| ACSN_TARGET_EDITOR=Make Target Editor |
| ACSD_TARGET_EDITOR=This dialog allows you to add, rename, and delete targets associated with the makefile |
| ACSN_TARGET_LIST=Target List |
| ACSD_TARGET_LIST=List of Make targets |
| |
| # |
| NOT_A_VALID_BUILD_DIRECTORY=Build Directory {0} is not a valid directory. |
| |
| PROP_CMAKE_COMMAND=Orde CMake |
| HINT_CMAKE_COMMAND=Select the name or path of the cmake command you want to run |
| |
| PROP_CMAKE_PARAMS=Argumentos |
| HINT_CMAKE_PARAMS=Sets command-line options to be included while building this pro-file |
| |
| PROP_CMAKE_ENVIRONMENT=Contorno |
| HINT_CMAKE_ENVIRONMENT=Vari\u00e1beis de contorno |
| |
| PROP_RUN_CMAKE_DIRECTORY=Executar cartafol |
| HINT_RUN_CMAKE_DIRECTORY=Select which directory cmake should be executed from |
| |
| PROP_QMAKE_COMMAND=Orde QMake |
| HINT_QMAKE_COMMAND=Select the name or path of the qmake command you want to run |
| |
| PROP_QMAKE_PARAMS=Argumentos |
| HINT_QMAKE_PARAMS=Argumentos para qmake |
| |
| PROP_QMAKE_ENVIRONMENT=Contorno |
| HINT_QMAKE_ENVIRONMENT=Vari\u00e1beis de contorno |
| |
| PROP_RUN_QMAKE_DIRECTORY=Executar cartafol |
| HINT_RUN_QMAKE_DIRECTORY=Select which directory qmake should be executed from |
| |
| |