blob: 900f1d7bd528ac8488758283ad2bf9ebaae5166f [file] [log] [blame]
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
#
# Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved.
#
# Oracle and Java are registered trademarks of Oracle and/or its affiliates.
# Other names may be trademarks of their respective owners.
#
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common
# Development and Distribution License("CDDL") (collectively, the
# "License"). You may not use this file except in compliance with the
# License. You can obtain a copy of the License at
# http://www.netbeans.org/cddl-gplv2.html
# or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the
# specific language governing permissions and limitations under the
# License. When distributing the software, include this License Header
# Notice in each file and include the License file at
# nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the GPL Version 2 section of the License file that
# accompanied this code. If applicable, add the following below the
# License Header, with the fields enclosed by brackets [] replaced by
# your own identifying information:
# "Portions Copyrighted [year] [name of copyright owner]"
#
# Contributor(s):
#
# The Original Software is NetBeans. The Initial Developer of the Original
# Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun
# Microsystems, Inc. All Rights Reserved.
#
# If you wish your version of this file to be governed by only the CDDL
# or only the GPL Version 2, indicate your decision by adding
# "[Contributor] elects to include this software in this distribution
# under the [CDDL or GPL Version 2] license." If you do not indicate a
# single choice of license, a recipient has the option to distribute
# your version of this file under either the CDDL, the GPL Version 2 or
# to extend the choice of license to its licensees as provided above.
# However, if you add GPL Version 2 code and therefore, elected the GPL
# Version 2 license, then the option applies only if the new code is
# made subject to such option by the copyright holder.
# Form Actions
ACT_Add=A\u00f1adir de paleta
ACT_Events=Eventos
ACT_CustomizeLayout=Personalizar gestor de distribuci\u00f3n...
ACT_SelectLayout=Activar gestor de distribuci\u00f3n
NAME_FreeDesign=Dise\u00f1o libre
MSG_CannotSwitchToFreeDesign=No se puede cambiar el dise\u00f1o a Dise\u00f1o Libre en los contenedores no mostrados por el dise\u00f1ador. Invocar la acci\u00f3n Este Dise\u00f1o/Padre en el contenedor antes de intentar cambiarlo.
ACT_TestMode=Dise\u00f1o previo
ACT_ReloadForm=Recargar formulario
ACT_InstallBean=Componentes &Swing/AWT
ACT_InstallToPalette=Agregar a la Pal&eta...
ACT_InPlaceEdit=Editar Texto
ACT_EditContainer=Dise\u00f1ar este contenedor
ACT_EditForm=Dise\u00f1ar contenedor de alto nivel
ACT_CustomizeEmptySpace=Espacios entre componentes...
ACT_DefaultSize=Establecer tama\u00f1o predeterminado
ACT_Bind=Enlazar
MSG_NoBinding=No hay enlace preferido
ACT_Align=Alinear
ACT_ChooseSameSize=Mismo tama\u00f1o
ACT_SetAnchoring=Anclaje
ACT_SetResizability=Cambio de tama\u00f1o autom\u00e1tico
CTL_InspectorAction=&Inspector
CTL_OK=Aceptar
ACSD_CTL_OK=No disponible
CTL_Cancel=Cancelar
ACSD_CTL_Cancel=No disponible
CTL_RestoreDefault=Restaurar con el valor pre&determinado
ACSD_CTL_RestoreDefault=No disponible
MSG_InvalidValue=No se ha introducido ning\u00fan valor v\u00e1lido.
CTL_ResizabilityH=Horizontal
CTL_ResizabilityV=Vertical
CTL_AnchorLeft=Izquierda
CTL_AnchorRight=Derecha
CTL_AnchorTop=Parte superior
CTL_AnchorBottom=Parte inferior
CTL_AlignLeft=Izquierda
CTL_AlignRight=Derecha
CTL_AlignUp=Parte superior
CTL_AlignDown=Parte inferior
CTL_GroupLeft=Izquierda a la columna
CTL_GroupRight=Derecha a la columna
CTL_GroupHCenter=Centro a la columna
CTL_GroupUp=Arriba a la fila
CTL_GroupDown=Abajo a la fila
CTL_GroupVCenter=Centrar a la fila
CTL_SameSizeHorizontal=Mismo ancho
CTL_SameSizeVertical=Misma altura
TXT_ComponentsNotInOneContainer=El tama\u00f1o de los componentes no puede ser com\u00fan porque no est\u00e1n en el mismo contenedor.
# Formatting od event popup menu item, if it has no handlers
# {0}=name of event
FMT_CTL_EventNoHandlers={0}
# Formatting od event popup menu item, if it has exactly one handler
# {0}=name of event
# {1}=name of event handler
FMT_CTL_EventOneHandler={0} [{1}]
# Formatting od event popup menu item, if it has more than one handler
# {0}=name of event
FMT_CTL_EventMultipleHandlers={0}
# Formatting od handler popup menu item. These items are displayed as submenus of the event menu item
# {0}=name of handler
FMT_CTL_HandlerFromMultiple={0}
# Formatting of test form window title
FMT_TestingForm=Dise\u00f1o previo [{0}]
# Customize Empty Space action
TITLE_CustomizeEmptySpace=Espacios entre componentes
TITLE_EmptySpace=Espacio vacio
NAME_LeftSpace=&Izquierda
NAME_RightSpace=De&recha
NAME_TopSpace=Par&te superior
NAME_BottomSpace=&Parte inferior
NAME_SpaceSize=Tama\u00f1o
NAME_SpaceResizable=Redimensionable
VALUE_PaddingDefault=Predeterminado
VALUE_PaddingRelated=Peque\u00f1o predeterminado
VALUE_PaddingUnrelated=Medio predeterminado
VALUE_PaddingSeparate=Grande predeterminado
VALUE_NoEmptySpace=Sin Espacio
ACSD_LeftResizable=Se determina si el espacio a la izquierda es redefinible.
ACSD_RightResizable=Se determina si el espacio a la derecha es redefinible.
ACSD_BottomResizable=Se determina si el espacio inferior es redefinible.
ACSD_TopResizable=Se determina si el espacio superior es redefinible.
ACSD_EmptySpace=El cuadro de di\u00e1logo permite personalizar el espacio vac\u00edo alrededor del componente.
MSG_NegativeSpaceSize=El tama\u00f1o del espacio no puede ser negativo.
MSG_TooLargeSpaceSize=El tama\u00f1o del espacio no puede exceder de 32767.
MSG_CorruptedSpaceSize=El tama\u00f1o del espacio no es v\u00e1lido.
ACT_CustomCode=Personalizar c\u00f3digo
# Duplicate action
ACT_Duplicate=Duplicar
# Enclose In action
ACT_EncloseInContainer=Incluir en
MSG_EncloseInPleaseWait=Espere...
MSG_EncloseInFailed=El componente seleccionado no puede ser encerrado por este componente.
MSG_EncloseInNotEmpty=No se puede encerrar componentes en un contenedor no vac\u00edo.
# Design Parent action
ACT_DesignParentTopMenuItemName=[Padre superior]
ACT_DesignParentAction=Dise\u00f1ar padre