| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2008 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| # |
| # This Bundle is for JUnit module |
| # |
| |
| |
| |
| |
| active_handle=Activating JUnit |
| junitlib_confirm_accept=Baixar i instal\u00b7lar JUnit |
| junitlib_confirm_text=<html><p>Per a crear proves JUnit, l'IDE necessita baixar i instal\u00b7lar la biblioteca JUnit.</p><p>Do you want to proceed?<p> |
| junitlib_confirm_title=Crear proves |
| LBL_Action_CreateTest=Crear Proves J&Unit |
| |
| # Create Tests dialog |
| LBL_ClassToTest=&Class to Test: |
| LBL_PackageToTest=Package: |
| LBL_MultipleClassesSelected=More than one class is selected... |
| LBL_ClassName=&Nom classe: |
| LBL_Location=&Localitzaci\u00f3: |
| DefaultPackageName=<paquet predeterminat> |
| library_button=&Library Manager... |
| MSG_ClassnameMustNotBeEmpty=Class name must be specified. |
| MSG_InvalidClassName=Invalid class name |
| MSG_ClassNameNotDefault=Warning: You will not be able to navigate between the test class and the tested class if a non-default name is used. |
| MSG_ClassNameEndNotTest=Warning: The projects infrastructure may not be able to initiate execution of the test class if a test class name not ends with \"Test\". |
| MSG_NoTestTarget_Fo=Unable to locate test package folders for folder "{0}". Per a crear proves el projecte ha de contenir una carpeta de paquets de proves. You can designate test package folders for your project in the Sources pane of the project Properties dialog. |
| MSG_NoTestTarget_Fi=Unable to locate test package folder for file "{0}". Per a crear proves el projecte ha de contenir una carpeta de paquets de proves. You can designate test package folders for your project in the Sources pane of the project Properties dialog. |
| MSG_NoTestFolderFoundInProject=Unable to locate test package folders in project "{0}". Per a crear proves el projecte ha de contenir una carpeta de paquets de proves. You can designate test package folders for your project in the Sources pane of the project Properties dialog. |
| MSG_MODIFIED_FILES=Warning: All modified files will be saved. |
| LBL_OK=Acceptar |
| AN_OK=Confirmar opcions |
| AD_OK=Confirmar opcions |
| |
| MSG_StatusBar_CreateTest_Begin=Creant proves... |
| MSG_StatusBar_CreateTests_Finished=Tests created. |
| MSG_StatusBar_CreateTests_Cancelled=Tests generation cancelled. |
| LBL_Action_Tests=Proves JUnit |
| LBL_junit_settings=JUnit Module Settings |
| |
| FMT_generator_status_ignoring=Ignorant: {0} ... |
| |
| LBL_Action_OpenTest=Proves JUnit |
| LBL_Action_GoToTest=Go to Test |
| LBL_Action_GoToTest_trimmed=Prova |
| LBL_Action_GoToSource=Anar a les classes provades |
| LBL_Action_GoToOpposite_Keystroke=ctrl alt k |
| |
| HINT_Action_OpenTest=Open test class |
| HINT_Action_GoToTest=Salta a la classe de proves corresponent o a la font de la classe |
| HINT_Action_CreateTest=Crear esquelet de proves |
| #used in JUnitSettingsBeanInfo |
| LBL_value_not_found=(value not found) |
| HINT_internex=<description of first property> |
| FMT_generator_status_creating=Creant: {0} ... |
| FMT_generator_status_scanning=Escanejant: {0} ... |
| LBL_generator_progress_title=Generating JUnit tests |
| |
| MSG_file_from_node_failed=File cannot be found for selected node. |
| MSG_test_class_not_found=Test class for class "{0}" was not found. |
| MSG_testsuite_class_not_found_def_pkg=Test class for the default package was not found. |
| MSG_testsuite_class_not_found=Test class for package "{0}" was not found. |
| MSG_testsuite_class_for_root_package_not_found=Suite class "{0}" for root package was not found. |
| MSG_no_project=Source file {0} does not belong to any project. |
| MSG_no_tests_in_project=JUnit testing is not set up for source file {0}. Usually this means that you must first activate JUnit testing in the project that this source file belongs to. |
| MSG_testdir_not_found=The directory {0} for tests was not found. |
| MSG_multiproject_selection=The selection cannot span multiple projects. |
| MSG_invalid_packages=Some package or class names are invalid. No es pot realitzar. |
| |
| MSG_cannot_set_junit_ver=Cannot update set of project's libraries |
| |
| networkproblem_header=Unable to connect to the NetBeans plugin portal |
| networkproblem_message=Comproveu la configuraci\u00f3 del proxy o toneu-ho a intentar m\u00e9s tard. El servidor pot no estar disponible. You may also want to make sure that your firewall is not blocking network traffic. \n\nIf you have the missing "junit" library, you can resolve the reference problem manually using Library Manager. |
| nodownload_header=la biblioteca "junit" no ha estat baixada |
| nodownload_message=Podeu intentat de baixar-vos de nou la biblioteca "junit", o b\u00e9 \n\nsi se us ha desaparegut la biblioteca "junit", podeu resoldre el problema de la refer\u00e8ncia mitjan\u00e7ant l'eina de gesti\u00f3 de biblioteques. |
| proxy_button=&Prefer\u00e8ncies del Proxy... |
| resolve_title=Resolve "junit" Reference Problem |
| searching_handle=Searching for "junit" library on NetBeans plugin portal... |
| # TestCreator |
| #TestCreator.suiteMethod.JavaDoc.comment=suite method automatically generated by JUnit module |
| #PARTI18N the localized message needs to be put after the '//' characters |
| #TestCreator.suiteMethod.suiteBlock.comment=// if "JUNIT" tags are present, the body will be regenerated each time a suite class is created |
| #TestCreator.variantMethods.JavaDoc.comment=Test of {0} method, of class {1}. |
| #PARTI18N - the localized message needs to be put after the 'TODO' characters |
| #TestCreator.variantMethods.defaultComment=TODO review the generated test code and remove the default call to fail. |
| #TestCreator.variantMethods.onlyComment=TODO add your test code. |
| #TestCreator.variantMethods.defaultFailMsg=The test case is a prototype. |
| #TestCreator.abstracImpl.JavaDoc.comment=Generated implementation of abstract class {0}. Please modify the sample bodies of generated methods. |
| #PARTI18N - the localized message needs to be put after the '// TODO' characters |
| #TestCreator.methodImpl.bodyComment=// TODO fill the body in order to provide useful implementation |
| #TestCreator.javaClass.addTestsHereComment.l1=// TODO add test methods here. The name must begin with 'test'. For example: |
| #TestCreator.javaClass.addTestsHereComment.l2=// public void testHello() {} |
| |
| |
| # Create tests window |
| JUnitCfgOfCreate.Title=Crear proves |
| JUnitCfgOfCreate.AD=Crear proves |
| |
| # Class name |
| JUnitCfgOfCreate.clsName.toolTip=Name of the test class |
| JUnitCfgOfCreate.clsName.AN=Test Class Name |
| JUnitCfgOfCreate.clsName.AD=Name of the test class to be created |
| |
| # Location |
| JUnitCfgOfCreate.location.toolTip=Target source root for the test class |
| JUnitCfgOfCreate.location.AN=Test Class Location |
| JUnitCfgOfCreate.location.AD=Target source root for the test class |
| |
| # Generate options |
| JUnitCfgOfCreate.jpCodeGen.title=\ Code Generation\ |
| |
| # Generate tests for public methods |
| JUnitCfgOfCreate.chkPublic.text=\ &Public |
| JUnitCfgOfCreate.chkPublic.toolTip=Generate tests for public member methods. |
| JUnitCfgOfCreate.chkPublic.AN=Public Methods |
| JUnitCfgOfCreate.chkPublic.AD=Generate tests for public member methods. |
| PROP_members_public=Generate Tests for Public Member Methods |
| HINT_members_public=Generate Tests for Public Member Methods |
| |
| # Generate tests for protected methods |
| JUnitCfgOfCreate.chkProtected.text=\ Pr&otected |
| JUnitCfgOfCreate.chkProtected.toolTip=Generate tests for protected member methods. |
| JUnitCfgOfCreate.chkProtected.AN=Protected Methods |
| JUnitCfgOfCreate.chkProtected.AD=Generate tests for protected member methods. |
| PROP_members_protected=Generate Tests for Protected Member Methods |
| HINT_members_protected=Generate Tests for Protected Member Methods |
| |
| |
| # Generate tests for package private methods |
| JUnitCfgOfCreate.chkPackage.text=\ Pac&kage Private |
| JUnitCfgOfCreate.chkPackage.toolTip=Generate tests for default member methods. |
| JUnitCfgOfCreate.chkPackage.AN=Package Private Methods |
| JUnitCfgOfCreate.chkPackage.AD=Generate tests for default member methods. |
| PROP_members_package=Generate Tests for Default Member Methods |
| HINT_members_package=Generate Tests for Default Member Methods |
| |
| |
| # Generate Comments |
| JUnitCfgOfCreate.chkComments.text=\ Source Code H&ints |
| JUnitCfgOfCreate.chkComments.toolTip=Generate comments in test method bodies. |
| JUnitCfgOfCreate.chkComments.AN=Generar indicacions de codi font |
| JUnitCfgOfCreate.chkComments.AD=Generate comments in test method bodies. |
| PROP_body_comments=Generate Comments in Test Method Bodies |
| HINT_body_comments=Generate Comments |
| |
| # Generate default bodies |
| JUnitCfgOfCreate.chkContent.text=\ Default &Method Bodies |
| JUnitCfgOfCreate.chkContent.toolTip=Generate default bodies of test methods. |
| JUnitCfgOfCreate.chkContent.AN=Generate Default Method Bodies |
| JUnitCfgOfCreate.chkContent.AD=Generate default bodies of test methods. |
| PROP_body_content=Generate Default Bodies of Test Methods |
| HINT_body_content=Generate Default Bodies of Test Methods |
| |
| # Generate Javadoc |
| JUnitCfgOfCreate.chkJavaDoc.text=\ &Javadoc Comments |
| JUnitCfgOfCreate.chkJavaDoc.toolTip=Generate Javadoc comments. |
| JUnitCfgOfCreate.chkJavaDoc.AN=Generate Javadoc Comments |
| JUnitCfgOfCreate.chkJavaDoc.AD=Generate Javadoc comments. |
| PROP_javadoc=Generate Javadoc Comments |
| HINT_javadoc=Generate Javadoc Comments |
| |
| |
| # Include abstract classes |
| JUnitCfgOfCreate.chkAbstractImpl.text=\ &Abstract Classes |
| JUnitCfgOfCreate.chkAbstractImpl.toolTip=Generate tests for abstract classes. |
| JUnitCfgOfCreate.chkAbstractImpl.AN=Include Abstract Classes |
| JUnitCfgOfCreate.chkAbstractImpl.AD=Include abstract classes. |
| PROP_generate_abstract_impl=Include Abstract Classes |
| HINT_generate_abstract_impl=Generate Tests for Abstract Classes |
| |
| # Include exceptions |
| JUnitCfgOfCreate.chkExceptions.text=\ &Exception Classes |
| JUnitCfgOfCreate.chkExceptions.toolTip=Generate tests for exception classes. |
| JUnitCfgOfCreate.chkExceptions.AN=Include Exception Classes |
| JUnitCfgOfCreate.chkExceptions.AD=Include exception classes. |
| HINT_generate_exception_classes=Generate Tests for Exception Classes |
| PROP_generate_exception_classes=Include Exception Classes |
| |
| # Include Package Private Classes |
| JUnitCfgOfCreate.chkPackagePrivateClasses.text=\ Packa&ge Private Classes |
| JUnitCfgOfCreate.chkPackagePrivateClasses.toolTip=Generate tests for package private classes. |
| JUnitCfgOfCreate.chkPackagePrivateClasses.AN=Include Package Private Classes |
| JUnitCfgOfCreate.chkPackagePrivateClasses.AD=Include package private classes. |
| PROP_include_package_private_classes=Include Package Private Classes |
| HINT_include_package_private_classes=Generate Tests for Package Private Classes |
| |
| |
| # Generate suites |
| JUnitCfgOfCreate.chkGenerateSuites.text=\ Gene&rate Test Suites |
| JUnitCfgOfCreate.chkGenerateSuites.toolTip=Generate suite classes. |
| JUnitCfgOfCreate.chkGenerateSuites.AN=Generate Suite Classes |
| JUnitCfgOfCreate.chkGenerateSuites.AD=Generate suite classes. |
| PROP_generate_suite_classes=Generate Suite Classes |
| HINT_generate_suite_classes=Generate Suite Classes |
| |
| |
| # Generate setUp() or @Before method |
| JUnitCfgOfCreate.chkSetUp.text=\ Te&st Initializer |
| JUnitCfgOfCreate.chkSetUp.toolTip=setUp() / @Before |
| JUnitCfgOfCreate.chkSetUp.AN=Generate Test Initializer Method |
| JUnitCfgOfCreate.chkSetUp.AD=Generate test initializer method. The method will be either the setUp method or a method with annotation "Before" |
| |
| |
| # Generate tearDown() or @After method |
| JUnitCfgOfCreate.chkTearDown.text=\ Test Finali&zer |
| JUnitCfgOfCreate.chkTearDown.toolTip=tearDown() / @After |
| JUnitCfgOfCreate.chkTearDown.AN=Generate Test Finalizer Method |
| JUnitCfgOfCreate.chkTearDown.AD=Generate test finalizer method. The method will be either the tearDown method or a method with annotation "After" |
| |
| |
| # Generate @BeforeClass method |
| JUnitCfgOfCreate.chkBeforeClass.text=\ Test Class Initializer |
| JUnitCfgOfCreate.chkBeforeClass.toolTip=Generate @BeforeClass method |
| JUnitCfgOfCreate.chkBeforeClass.AN=Generate Test Class Initializer Method |
| JUnitCfgOfCreate.chkBeforeClass.AD=Generate initialization method annotated with the BeforeClass annotation |
| |
| |
| # Generate @AfterClass method |
| JUnitCfgOfCreate.chkAfterClass.text=\ Test Class Finalizer |
| JUnitCfgOfCreate.chkAfterClass.toolTip=Generate @AfterClass method |
| JUnitCfgOfCreate.chkAfterClass.AN=Generate Test Class Finalizer Method |
| JUnitCfgOfCreate.chkAfterClass.AD=Generate finalizer method annotated with the AfterClass annotation |
| |
| |
| # CheckBox group titles |
| JUnitCfgOfCreate.groupAccessLevels=Method Access Levels |
| JUnitCfgOfCreate.groupClassTypes=Class Types |
| JUnitCfgOfCreate.groupOptClasses=Optional Classes |
| JUnitCfgOfCreate.groupOptCode=Codi Generat |
| JUnitCfgOfCreate.groupOptComments=Generated Comments |
| |
| # Generate main method |
| PROP_generate_main_method=Generate main Method |
| HINT_generate_main_method=Generate main Method |
| PROP_generate_main_method_body=Body of the main Method |
| HINT_generate_main_method_body=Body of the main Method |
| |
| # Generate test initializers and finalizers |
| PROP_generate_setUp=Generate Test Initializer |
| HINT_generate_setUp=setUp() or @Before |
| PROP_generate_tearDown=Generate Test Finalizer |
| HINT_generate_tearDown=tearDown() or @After |
| PROP_generate_class_setUp=Generate Test Class Initializer |
| HINT_generate_class_setUp=@BeforeClass |
| PROP_generate_class_tearDown=Generate Test Class Finalizer |
| HINT_generate_class_tearDown=@AfterClass |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_generate_setUp_default=true |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_generate_tearDown_default=true |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_generate_class_setUp_default=true |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_generate_class_tearDown_default=true |
| |
| # test skeleton generator (JUnit 3 / JUnit 4 / ...) |
| |
| PROP_generator=Test Skeleton Generator |
| HINT_generator=Test Skeleton Generator |
| LBL_JUnit3_generator=JUnit &3.x |
| AD_JUnit3_generator=Crear proves basades amb JUnit 3.x |
| LBL_JUnit4_generator=JUnit &4.x |
| AD_JUnit4_generator=Crear proves basades amb JUnit 4.x |
| LBL_JUnit4_generator_reqs=JUnit &4.x (necessita el nivell de codi 1.5+) |
| AD_JUnit4_generator_reqs=JUnit 4.x (necessita el nivell de codi 1.5+) |
| LBL_JUnit_generator_ask_user=ask |
| |
| LBL_title_select_generator=Select JUnit Version |
| AD_title_select_generator=Select JUnit Version |
| MSG_select_junit_version_srclvl_unknown=No es pot detectar el nivell de codi del projecte. Select JUnit version for which the created test skeletons should be created: |
| MSG_select_junit_version=Select JUnit version for which the created test skeletons should be created: |
| LBL_Select=&Seleccionar |
| AD_Select = Select Junit test version |
| AN_Select = Select Junit test version |
| |
| LBL_title_cannot_use_junit4=Cannot Create JUnit 4.x Tests |
| LBL_create_junit3_tests=Create JUnit 3.x tests |
| AD_create_junit3_tests=Create JUnit 3.x tests |
| AN_create_junit3_tests=Create JUnit 3.x tests |
| MSG_last_was_junit4_what_now=Previous JUnit tests created for this project were JUnit 4.x tests. Actualment el nivell de codi del projecte est\u00e0 establer a {0}. Aquest nivell de codi no suporta les proves de JUnit 4.x. Do you want to create JUnit 3.x tests instead? |
| |
| MSG_cannot_use_default_junit4=The JUnit module is set to create JUnit 4.x tests by default. El projecte en el qual voleu crear les proves el nivell de codi est\u00e0 establert a {0}. Aquest novell de codi no suporta la creaci\u00f3 de proves JUnit 4.x. Do you want to create JUnit 3.x tests instead? |
| |
| #NOI18N - this property should not be localized - it is Java code |
| #PROP_generate_main_method_body_default_value=junit.textui.TestRunner.run(suite()); |
| |
| # Test class & test suite templates for JUnit 3.x tests |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_junit3_testClassTemplate=Templates/JUnit/JUnit3TestClass.java |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_junit3_testSuiteTemplate=Templates/JUnit/JUnit3Suite.java |
| |
| # Test class & test suite templates for JUnit 4.x tests |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_junit4_testClassTemplate=Templates/JUnit/JUnit4TestClass.java |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_junit4_testSuiteTemplate=Templates/JUnit/JUnit4Suite.java |
| |
| # Test case classname prefix/suffix |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_test_classname_prefix= |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_test_classname_suffix=Test |
| |
| # Test suite classname prefix/suffix |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_suite_classname_prefix= |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_suite_classname_suffix=Suite |
| |
| PROP_root_suite_classname=Root Suite Class Name |
| HINT_root_suite_classname=Root Suite Class Name |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_root_suite_classname_default_value=RootSuite |
| |
| #NOI18N - this value is in .properties just to allow branding |
| #PROP_generate_tests_from_test_classes=false |
| |
| # |
| # Layer stuff |
| # |
| |
| # Help stuff |
| Menu/Help/HelpShortcuts/org-netbeans-modules-junit-mainpage.xml=JUnit Module Help |
| Actions/Help/org-netbeans-modules-junit-mainpage.xml=JUnit Module Help |
| |
| # Options stuff |
| Actions/JUnitTests=Proves JUnit |
| |
| # Templates stuff |
| Templates/JUnit=JUnit |
| Templates/JUnit/SimpleJUnitTest.java=Proves per a una Classe Existent |
| Templates/JUnit/EmptyJUnitTest.java=Proves JUnit |
| Templates/JUnit/TestSuite.java=Conjunt de proves |
| Templates/JUnit/JUnit3TestClass.java=Classe de proves - JUnit 3.x |
| Templates/JUnit/JUnit3Suite.java=Conjunt de proves - JUnit 3.x |
| Templates/JUnit/JUnit4TestClass.java=Classe de proves - JUnit 4.x |
| Templates/JUnit/JUnit4Suite.java=Conjunt de proves - JUnit 4.x |
| Templates/JUnit/junit-custom.xml=Custom junit execution script |
| |
| |
| # |
| # No longer used labels (though they may be used in the future again) |
| # |
| |
| # manifest.mf |
| OpenIDE-Module-Name=Proves JUnit |
| OpenIDE-Module-Display-Category=Java |
| OpenIDE-Module-Short-Description=Creates tests suitable for the JUnit framework. |
| OpenIDE-Module-Long-Description=El m\u00f2dul JUnit us permet crear classes de proves apropiades per al framework de JUnit. |
| |
| #if no testable class is found in the selected folders |
| MSG_No_test_created=No tests were created because no testable class was found. |
| |
| MSG_template_not_found=Template file {0} was not found. Check the JUnit templates in the Template manager. |
| MSG_skipped_class=Class {0} was skipped because it was {1}. |
| MSG_skipped_classes=Some classes were skipped because they were {0}. |
| |
| MSG_MISSING_TEST=The directory for tests was not found. Use source directory instead? |
| MSG_MISSING_TEST_TITLE=Missing Test Directory |
| |
| # human-readable strings for reasons to skip test creation for a class |
| # The wording should match the sentence "because the class is ..." |
| TestabilityResult_OK=testable |
| TestabilityResult_Private=privat |
| TestabilityResult_PkgPrivate=package-private |
| TestabilityResult_ExceptionClass=an exception class |
| TestabilityResult_NonstaticInnerClass=incrustat no est\u00e0tic |
| TestabilityResult_AbstractClass=abstract |
| TestabilityResult_TestClass=a test class |
| TestabilityResult_NoTestableMethods=without testable methods |
| |
| # separators used between reasons in a report about skipped classes |
| # the " " are stripped, they are included to correctly represent spaces |
| COMMA=", " |
| |
| # used to separate the last reason in a disjunctive sentence like: |
| # Some classes were skipped because they were abstract OR package private |
| # the " are stripped |
| OR=" or " |
| |
| # used to separate t he last reason in a conjunctive sentence like: |
| # The class ... was skipped because it was abstract AND package private. |
| # the " are stripped |
| AND=" and " |
| tryagain_button=Try &Again |
| |