| # |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| # |
| |
| # Sample ResourceBundle properties file |
| |
| # Code in customizers/common uses these |
| LBL_Move_Up=Moure amunt |
| LBL_Move_Down=Moure abaix |
| LBL_Go_To_Source=Anar al font |
| LBL_New=Nou... |
| MNC_New=v |
| ACSN_New=Nou |
| ACSD_New=Press this button to add an entry to the table. |
| LBL_Edit=Editar... |
| MNC_Edit=d |
| ACSN_Edit=Editar |
| ACSD_Edit=Press this button to edit the selected entry in the table. |
| LBL_Delete=Eliminar |
| MNC_Delete=C |
| ACSN_Delete=Eliminar |
| ACSD_Delete=Press this button to delete the selected entry in the table. |
| LBL_OK=Acceptar |
| ACSN_OK=Acceptar |
| ACSD_OK=Press this button to accept the entries in this panel. |
| LBL_Cancel=Cancel\u00b7lar |
| ACSN_Cancel=Cancel\u00b7lar |
| ACSD_Cancel=Press this button to cancel this panel and it's entries. |
| LBL_Help=A&juda |
| ACSN_Help=Ajuda |
| ACSD_Help=Press this button to get help on this panel. |
| ACSN_ErrorTextArea=Error Messages |
| ACSD_ErrorTextArea=Messages indicating invalid fields are displayed here. |
| |
| MSG_Already_Exists=Object already exists. |
| MSG_Failure=Failure |
| |
| LBL_True=Cert |
| LBL_False=Fals |
| |
| # Shared labels (used across a range customizer panels so be careful that usage |
| # is consistent. |
| |
| # "Property" (name/value/description popup) labels |
| LBL_Name=Nom |
| LBL_Name_1=Nom: |
| MNE_Name=N |
| ACSN_Name=Nom |
| ACSD_Name=The property name. |
| LBL_Value=Valor |
| LBL_Value_1=Valor: |
| MNE_Value=T |
| ACSN_Value=Valor |
| ACSD_Value=Introdu\u00efu en aquest requadre el valor per a aquesta propietat. |
| LBL_Description=Descripci\u00f3 |
| LBL_Description_1=Descripci\u00f3: |
| MNE_Description=C |
| ACSN_Description=Descripci\u00f3 |
| ACSD_Description=A description of what this property is for. |
| |
| # For the 'required mark' that the popups will have to designate required fields. |
| LBL_RequiredMark=* |
| LBL_RequiredMessage=* denotes required field |
| ACSN_RequiredMark=Required Mark |
| ACSD_RequiredMark=Fields marked with this label must be filled in. |
| |
| # For the buttons that manipulate the table and combobox selectors |
| LBL_Add=Afegir |
| MNE_Add=A |
| ACSN_Add=Afegir |
| ACSD_Add=Add a new entry to this table or combobox |
| LBL_Remove=Treure |
| MNE_Remove=P |
| ACSN_Remove=Treure |
| ACSD_Remove=Remove the selected entry from this table or combobox |
| |
| # 'toString()' format for ListMapping |
| LBL_SizeOfListText={0,choice,0#No properties|1#One property|1<{0,number,integer} properties} |
| |
| # Error messages (Is there a good way to put all these in it's own bundle?) |
| # Perhaps an errors directory off customizer that only contains a bundle? |
| ERR_ObjectIsDuplicate=An object of this type already exists. |
| ERR_NameFieldIsEmpty=Select a property name first. |
| ERR_SpecifiedFieldIsEmpty={0} field should not be blank. |
| ERR_NameFieldContainsWhitespace={0} field should not contain any whitespace. |
| ERR_NumberTooLow={0} is too low. The minimum value is {1}. |
| ERR_NumberTooHigh={0} is too high. The maximum value is {1}. |
| ERR_NumberInvalid={0} no \u00e9s un n\u00famero v\u00e0lid. |
| ERR_PropertyValueInvalid=Value specified is invalid. Value for property ''{0}'' should be of type ''{1}''. |
| ERR_NotValidIdentifierForField={0}: ''{1}'' is not a valid identifier. |
| ERR_NotValidIdentifier=''{0}'' is not a valid identifier. |
| ERR_NotValidPackage=''{0}'' is not a valid java package name. |
| |
| ERR_NumberTooLowForField={0}: {1} is too low. The minimum value is {2}. |
| ERR_NumberTooHighForField={0}: {1} is too high. The maximum value is {2}. |
| ERR_NumberInvalidForField={0}: {1} is not a valid number. |
| |
| ERR_CustomizerHelpNotFound=CustomizerTitlePanel not child of panel implementing HelpCtx.Provider. |
| |
| # Message format for error messages |
| MSG_ErrorDisplayFormat={0} : {1} |
| |
| #Format used for marked labels. Marked labels are used for manadatory fields. |
| FMT_Required_Field_Label={0} {1} |
| |
| LBL_Method=M\u00e8tode |
| LBL_Security=Seguretat |
| LBL_Request_Protection_AuthSource=Request Protection AuthSource |
| LBL_Request_Protection_AuthRecipient=Request Protection AuthRecipient |
| LBL_Response_Protection_AuthSource=Response Protection AuthSource |
| LBL_Response_Protection_AuthRecipient=Response Protection AuthRecipient |
| LBL_Interface=Interf\u00edcie |
| LBL_Interface_1=Interface : |
| LBL_ProviderID=Provider ID |
| LBL_ProviderID_1=Provider ID : |
| MNC_Provider_ID=p |
| Provider_ID_Acsbl_Name=Provider ID |
| Provider_ID_Acsbl_Desc=Provider ID |
| Provider_ID_Tool_Tip=Provider ID |
| Webservice_Method_Acsbl_Name=Webservice Method or Operation |
| Webservice_Method_Acsbl_Desc=Webservice Method or Operation list. |
| Webservice_Method_Tool_Tip=Select the method/operation first and then select the security attributes you would like to assign. |
| |
| MsgSecBndg_Method_Header_Tool_Tip=Methods to Secure. |
| Security_Header_Tool_Tip=Secures selected Methods. |
| ReqProtctn_AuthSrc_Header_Tool_Tip=Request Protection Auth Source. |
| ReqProtctn_AuthRcpt_Header_Tool_Tip=Request Protection Auth Recipient. |
| ResProtctn_AuthSrc_Header_Tool_Tip=Response Protection Auth Source. |
| ResProtctn_AuthRctp_Header_Tool_Tip=Response Protection Auth Recipient. |
| |
| ACSN_Table=Table Elements |
| ACSD_Table=Table Elements |
| |
| TITLE_ChangeDocType=Change Configuration Version |
| LBL_ServerVersion_1=Server Version : |
| ACSN_ServerVersion=Server Version |
| ACSD_ServerVersion=Specifies the server version to use DOCTYPES for. |
| LBL_DocTypeTag_1=El tag Doctype utilitzat en aquesta versi\u00f3 : |
| ACSN_DocTypeTag=Tag Doctype |
| # ACSD_DocTypeTag is a DOCTYPE statement and set dynamically by code. |
| |
| LBL_EditAsXml=Edit As XML |
| ACSN_EditAsXml=Edit as xml |
| ACSD_EditAsXml=Closes the configuration editor and reopens the configuration file in the XML text editor, saving first if necessary. |
| LBL_DocType=Doctype... |
| ACSN_Doctype=Doctype |
| ACSD_Doctype=Displays the current DOCTYPE for this configuration file and lets the user change it to any other valid DOCTYPE for the current target server. |
| WARN_WillSaveChanges=Unsaved changes in the configuration will be saved before updating the version. |
| WARN_PossibleDataLoss=When changing to an older version, any fields not supported in the older version will be truncated. |
| |
| ASCN_WarningMessage=Warning message |
| ASCN_ErrorMessage=Error message |
| |