| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2009 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| OpenIDE-Module-Name=Datasystems API |
| OpenIDE-Module-Short-Description=NetBeans Open API for manipulating data objects. |
| OpenIDE-Module-Long-Description=The Datasystems API is a layer atop the Filesystems API which recognizes and groups data objects and gives them particular semantics. Once a part of the general Open APIs, it is now split into an independent module. |
| OpenIDE-Module-Display-Category=Infrastructure |
| |
| #DefaultDataObject |
| HINT_DefaultDataObject=Unrecognized File |
| |
| EXC_SharedAccess=Shared access |
| |
| #Folder.Index |
| EXC_ReorderFailed=Cannot save new ordering. |
| |
| # {0} - folder that cannot be deleted |
| EXC_CannotDelete2=Cannot delete file {0}. |
| |
| # name for shadow of an object |
| # {0} real name of the shadow |
| # {1} real name of the original |
| # {2} full name of shadow file |
| # {3} full name of original file |
| # {4} display name of original node |
| FMT_shadowName={0} (\u2192) |
| |
| # name for shadow of an object |
| # {0} real name of the shadow |
| # {1} real name of the original |
| # {2} full name of shadow file |
| # {3} full name of original file |
| FMT_shadowHint=Link to {3} |
| |
| PROP_ShadowOriginalName=Original Name |
| HINT_ShadowOriginalName=Name of the object this link refers to. |
| PROP_ShadowOriginalFileSystem=Original Filesystem Name |
| HINT_ShadowOriginalFileSystem=Name of the filesystem of the original object. |
| |
| # DataNode |
| PROP_name=Name |
| HINT_name=Name of this object. |
| PROP_template=Template |
| HINT_template=If True, this object is a template (can make instances of itself). |
| PROP_files=All Files |
| HINT_files=A list of files represented by this object. |
| PROP_size=File Size |
| HINT_size=Length of this file in bytes. (Only applies to the first file listed in All Files.) |
| PROP_lastModified=Modification Time |
| HINT_lastModified=When this file was last modified. (Only applies to the first file listed in All Files.) |
| PROP_extension=Extension |
| HINT_extension=Primary file extension. |
| ERROR_extension=Cannot change extension. File is modified. |
| |
| # name of set with sorting options |
| PROP_sorting=Sorting |
| HINT_sorting=Sorting and ordering settings. |
| |
| # |
| # folder sort mode property |
| PROP_sort=Sort Mode |
| HINT_sort=Determines how objects in the package should be sorted. |
| # SortModeEditor |
| VALUE_sort_none=Unsorted |
| VALUE_sort_names=By Name |
| VALUE_sort_class=By Type |
| VALUE_sort_folder_names=By Name (Packages First) |
| VALUE_sort_last_modified=By Modification Time |
| VALUE_sort_size=By File Size |
| |
| |
| # |
| # Names of paste types |
| # |
| PT_move=&Move |
| PT_copy=&Copy |
| PT_instantiate=&Instantiate |
| PT_shadow=Create &Link |
| PT_serialize=&Serialize |
| PT_instance=&Default instance |
| |
| # |
| SerializeBean_Text=&Name of file to serialize the instance to |
| SerializeBean_Title=Instance Serialization |
| |
| # |
| # new folder |
| # |
| CTL_NewFolder=Folder |
| CTL_NewFolderName=&Name: |
| CTL_NewFolderTitle=Create New Folder |
| #CTL_NewFolderValue=NewFolder |
| |
| # formatting of error message when creating a folder and a file of given name already exists there |
| # {0} name of the new folder being created |
| # {1} name of the folder the new folder is being created in |
| MSG_FMT_FileExists=File {0} already exists in folder {1}. |
| |
| # formatting of error message when creating a folder and a folder with specified name already exists there |
| # {0} name of the new folder being created |
| # {1} name of the folder the new folder is being created in |
| MSG_FMT_FolderExists=Folder {0} already exists in folder {1}. |
| |
| # when the object is larger than size expected to fit into memory |
| # {0} path to the file |
| # {1} name of the file |
| # {2} size in bytes |
| # {3} size in Kb |
| # {4} size in Mb |
| # {5} size in Gb |
| MSG_ObjectIsTooBig=The file {1} seems to be too large ({2,choice,0#{2}b|1024#{3} Kb|1100000#{4} Mb|1100000000#{5} Gb}) to safely open. \nOpening the file could cause OutOfMemoryError, which would make the IDE unusable. Do you really want to open it? |
| |
| |
| |
| # XMLDataObject |
| PROP_XmlLoader_Name=XML Configuration Files |
| PROP_XmlError=Error (recoverable) |
| PROP_XmlWarning=Warning |
| PROP_XmlFatalError=FATAL ERROR |
| ###PROP_XmlMessage=#{0} \"{1}\" [{2}:{3},{4}] |
| #PROP_XmlMessage=#{0} \"{1}\" [{2}:{3}] |
| # ^^^ formatting of xml parser error message |
| # {0} level of error (PROP_Xml[Error|Warning|FatalError]) |
| # {1} error message |
| # {2} system ID of xml document |
| # {3} line number |
| # {4} column number |
| |
| # DataFolder |
| EXC_WrongName=Cannot create folder; {0} is not a valid name. |
| |
| # {0} name of folder that can't be copied. |
| EXC_CannotCopyTheSame=Cannot copy {0}: The destination folder is the same as the source folder. |
| # {0} name of folder that can't be copied. |
| EXC_CannotCopySubfolder=Cannot copy {0}: The destination folder is a subfolder of the source folder. |
| |
| #Title of the new from template dialog |
| # {0} = object which will be created |
| CTL_TemplateTitle2=New Wizard - {0} |
| #Title of the new from template dialog |
| # Object is not known. Used when template chooser panel is shown. |
| CTL_TemplateTitle=New Wizard |
| LAB_TemplateChooserPanelName=Choose Template |
| LAB_SelectTemplateBorder=&Select a Template: |
| MSG_NoDescription=No description |
| MSG_InitDescription=Initializing description... |
| LAB_TemplateDescriptionBorder=&Template Description: |
| LAB_TargetLocationPanelName=Target Location |
| LAB_TargetLocationDescription=Please select a folder for the newly created object or enter the folder name below: |
| LAB_TargetLocationDescription_Mnemonic=s |
| ACSD_TemplatesTree=N/A |
| ACSD_TemplateWizard1=N/A |
| |
| CTL_NewObjectName=&Name\: |
| ACSD_NewObjectName=N/A |
| ACSD_TargetLocationDescription=N/A |
| ACSD_TemplateWizard2=N/A |
| |
| ACSD_NewObjectPanel=N/A |
| |
| LBL_settingsNodeName=Settings |
| EXC_folder_delete_failed=Could not remove source folder while moving. |
| #{0} = display name of the filesystem |
| FMT_TemplateDefaultRootFolderName=<top folder> [{0}] |
| FMT_DefaultNewObjectName=<default name> |
| |
| LBL_shadow_loader_display_name=Links |
| LBL_folder_loader_display_name=Folders |
| LBL_default_loader_display_name=Unrecognized Objects |
| LBL_instance_loader_display_name=Action Instances |
| |
| FMT_CannotCopyDo=Warning: Object {0} cannot be copied. |
| FMT_CannotMoveDo=Warning: Object {0} cannot be moved. |
| |
| # InstanceDataObject |
| LBL_separator_instance=(separator) |
| PROP_instance_class=Class Name |
| HINT_instance_class=Java class name of the object being represented. |
| # {0} class name of bean to save |
| # {1} file to save the bean to |
| EXC_CannotSaveBean=There are problems with saving the {0} bean. |
| |
| FMT_brokenShadowName={0} (Broken Link) |
| HINT_brokenShadowOriginalName=Broken Link |
| PROP_brokenShadowOriginalName=Broken Link |
| # what does Broken Link Filesystem refer to? Broken link to the filesystem? pkeegan |
| PROP_brokenShadowFileSystem=Broken Link Filesystem |
| HINT_brokenShadowFileSystem=Broken Link Filesystem |
| ##InstanceDataObject.Depricated |
| LBL_BrokenSettings=<Unrecognized setting> |
| |
| # human readable names, not shown anywhere |
| LBL_DOcopy=Data Object Copy Flavor |
| LBL_DOcut=Data Object Cut Flavor |
| #NewObjectPanel |
| LAB_NewObjectPanelName=New Object Name |
| FMT_DefaultNewObject=<default> |
| |
| # DataLoader |
| # {0} - name of loader affected |
| EXC_missing_actions_in_loader=The popup menu for objects of type {0} could not be restored; using default settings. |
| LBL_loader_display_name=Loader |
| |
| MSG_renameError=This object cannot be renamed from {0} to {1}. |
| MSG_NotValidName=Cannot give {0} an empty name. |
| ERR_NoFilesystem=No enabled filesystem. Make sure that you have at least one filesystem that is not read-only and is not hidden. |
| |
| # TemplateWizardPanel2 |
| MSG_fs_or_folder_does_not_exist=The target filesystem or folder does not exist. |
| MSG_fs_is_readonly=The target filesystem is read-only. |
| # {0} - name of the existing file |
| MSG_file_already_exist=The file {0} already exists. |
| |
| |
| |
| # |
| # Messages for org.openide.actions in openide-loaders.jar |
| # |
| ACT_FileSystemAction=Filesystem Action |
| #InstantiateAction |
| Instantiate=Instantiate |
| #SaveAsTemplateAction |
| SaveAsTemplate=Save As Template... |
| Title_SaveAsTemplate=Save As Template |
| CTL_SaveAsTemplate=&Select the category in which the new template will appear: |
| CTL_SaveAsTemplate_TemplatesRoot=Templates |
| SaveAll=Save &All |
| HINT_SaveAll=Save all files (if the Compile on Save feature is on, this will also compile/build your files) |
| # FileSystemRefreshAction |
| LAB_Refresh=Refresh Folder |
| # NewTemplateAction |
| EXC_TemplateFailed=Creation of the object from template failed. |
| NewTemplate=&New |
| NewTemplateAction=All Templates... |
| |
| |
| # |
| # Messages for org.openide.awt in openide-loaders.jar |
| # |
| CTL_EmptyMenu=Empty |
| |
| |
| |
| |
| # |
| # Messages for org.openide.text in openide-loaders.jar |
| # |
| |
| |
| # DataEditorSupport |
| |
| # {0} = name of the data object |
| # {1} = file name with package |
| CTL_ObjectOpen=Opening {0} ... |
| |
| # {0} = name of the data object |
| MSG_SaveFile=File {0} is modified. Save it ? |
| |
| # messages for editor support |
| |
| # {0} = 0 if readonly, 1 if modified, 2 if modified and readonly!, 3 otherwise |
| # {1} name of the file |
| #LAB_EditorName={0,choice,0#{1} [r/o]|1#{1} *|2#{1} [r/o] *|3#{1}} |
| TIP_editor_modified=\ (modified) |
| TIP_editor_ro=\ (read-only) |
| |
| # format to create default display name for a line |
| # {0} simple name of file |
| # {1} full name of file |
| # {2} line number |
| FMT_LineDisplayName2={1}:{2} |
| |
| # DataEditorSupport |
| # Cases when modified source file was changed to [read-only] |
| MSG_FileReadOnlyClosing=File {0} was changed to read-only! All changes will be discarded. |
| MSG_FileReadOnlySaving=File {0} was changed to read-only! Can not save it. |
| MSG_FileReadOnlyChanging=File {0} was changed to read-only! |
| |
| |
| MSG_BinaryFileQuestion=This file appears to contain binary data. Are you sure you want to open it in the text editor? |
| MSG_BinaryFileWarning=Binary File Detected |
| |
| CTL_SaveAsAction=Sa&ve As... |
| MSG_SaveAsFailed=There were some problems while saving {0}\nCause: {1} |
| LBL_SaveAsTitle=Save As |
| MSG_CannotCreateTargetFolder=Cannot create the target folder. |
| MSG_SaveAs_SameFileSelected=Select a different file name please. |
| MSG_SaveAs_SameFileSelected_Title=Save As |
| |