| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| LBL_Rename=Yeniden Adland\u0131r |
| LBL_RenameComments=Apply Rename on &Comments |
| LBL_ChangeMethodSignatureAction=Change Method &Parameters... |
| LBL_ChangeMethodSignature=Change Method Parameters |
| DSC_Rename=Rename <b>{0}</b> to <b>{1}</b> |
| LBL_WhereUsedAction=Kulla&n\u0131mlar\u0131 Bul |
| LBL_WhereUsed=Kullan\u0131mlar\u0131 Bul |
| LBL_UsagesOf=Usages of {0} |
| DSC_WhereUsed=Usages of <b>{0}</b> |
| DSC_FindUsages=Kullan\u0131mlar |
| DSC_WhereUsedMethodOverriders=Overriding Methods |
| DSC_WhereUsedFromBaseClass=Search From Base Class |
| DSC_WhereUsedFindAllSubTypes=Find All SubTypes of <b>{0}</b> |
| DSC_WhereUsedFindDirectSubTypes=Find Direct SubTypes of <b>{0}</b> |
| DSC_WhereUsedOf=of <b>{0}</b> |
| DSC_And=ve |
| LBL_EncapsulateFieldsAction=Encapsula&te Fields... |
| LBL_EncapsulateFields=Encapsulate Fields |
| DSC_EncapsulateFields=Encapsulate fields in class <b>{0}</b> |
| |
| LBL2_MoveClass=Move source to package "{0}" |
| LBL2_MoveObject=Move "{0}" to package "{1}" |
| LBL2_MovePackage=Move to "{0}" package |
| LBL2_InsertImport=Add import {0} |
| LBL2_RemoveImport=Remove import {0} |
| |
| LBL_MoveClassAction=Move &Class... |
| LBL_MovePackageAction=Move Package... |
| LBL_MoveClass=Move Class |
| LBL_RefactorClassNeeded=Class was moved into another package and refactoring is necessary. |
| LBL_RefactorClassesNeeded=Multiple classes were moved into another package and refactoring is necessary. |
| LBL_MoveClasses=Move Classes |
| LBL_MoveClassesHeadline=Move listed classes |
| LBL_MovePackage=Move Package |
| LBL_Undo=Ge&ri Al |
| LBL_Redo=\u0130leri Al |
| DSC_MoveClass=Move class <b>{0}</b> to <b>{1}</b> package |
| DSC_MovePackage=Move package <b>{0}</b> to <b>{1}</b> package |
| LBL_MoveClassNamed=Move class {0} |
| LBL_ListOfClasses=List of &Classes: |
| LBL_MovePackageNamed=Move package {0} |
| LBL_ToPackage=&To Package: |
| ERR_AmbigousFileSystem=Package "{0}" is located in more than one project. Please, select the desired package in the Package Chooser. |
| ERR_ReadOnlyFileSystem=Cannot proceed. Package "{0}" is located only in read-only projects. |
| ERR_UnknownPackage=A package corresponding to the entered name cannot be found. |
| LBL_DefaultPackage=<default> |
| LBL_NeedsRefresh=TAZELEME \u0130HT\u0130YACI |
| LBL_OpenInNavigator=Open In Navigator |
| LBL_NewName=Ye&ni \u0130sim: |
| LBL_Occurence=olay |
| LBL_Occurences=olaylar |
| LBL_Error=error |
| LBL_Errors=hatalar |
| ERR_CannotRenameKeyword=Cannot refactor this object. |
| ERR_NoTypeDecls=File is empty. Cannot find references. |
| MoveClassPanel.updateReferencesCheckBox.AccessibleContext.accessibleDescription=YOK |
| MoveClassPanel.packageComboBox.AccessibleContext.accessibleDescription=YOK |
| |
| LBL_AnonymousClass=<anonymous class> |
| LBL_Initializer=<initializer> |
| LBL_Method=Metod |
| LBL_Field=Field |
| LBL_Constructor=Constructor |
| LBL_LocalVar=Local Variable |
| LBL_Parameter=Parametre |
| LBL_Folder=Klas\u00f6r |
| LBL_Package=Paket |
| LBL_Class=S\u0131n\u0131f |
| LBL_Interface=Interface |
| |
| # Find usages |
| DSC_MethodUsages=<html>Method <b>{0}</b> of class <b>{1}</b></html> |
| DSC_ClassUsages=<html>Class <b>{0}</b></html> |
| DSC_ConstructorUsages=<html>Constructor <b>{0}</b> of class <b>{1}</b></html> |
| DSC_FieldUsages=<html>Field <b>{0}</b> of class <b>{1}</b></html> |
| DSC_PackageUsages=<html>Package <b>{0}</b></html> |
| DSC_VariableUsages=<html>Variable <b>{0}</b></html> |
| |
| # Change parameters panel |
| LBL_TitleChangeParameters=Change Method Parameters |
| LBL_ChangeParsColName=Ad |
| LBL_ChangeParsColType=Tip |
| LBL_ChangeParsColDefVal=Varsay\u0131lan De\u011fer |
| LBL_ChangeParsColOrigIdx=Original Index |
| LBL_ChangeParsParUsed=Used |
| LBL_ChangeParsMods=A&ccess: |
| LBL_ChangeParsParameters=Parame&ters: |
| LBL_ChangeParsPreview=Method Signature Preview |
| LBL_ChangeParsAdd=&Ekle |
| LBL_ChangeParsRemove=R&emove |
| LBL_ChangeParsMoveUp=&Yukar\u0131 Ta\u015f\u0131 |
| LBL_ChangeParsMoveDown=A\u015fa\u011f\u0131 &Ta\u015f\u0131 |
| LBL_ChangeParsCannotDeleteTitle=Uyar\u0131 |
| LBL_ChangeParsCannotDelete=Parameter "{0}" is used within method body. Do you really want to delete "{0}"? |
| DSC_ChangeParsRootNode=Change parameters of <b>{0}</b> {1} to <b>{2}</b> |
| DSC_ChangeParsRootNodeMethod=method |
| DSC_ChangeParsRootNodeConstr=constructor |
| |
| LBL_PackagePrivate=package private |
| LBL_Protected=protected |
| |
| # Encapsulate field panel |
| LBL_TitleEncapsulateFields=Encapsulate Fields |
| LBL_ColField=Field |
| LBL_ColGetter=Create Getter |
| LBL_ColSetter=Create Setter |
| LBL_FieldList=&List of Fields to Encapsulate: |
| LBL_FieldVis=Fields' &Visibility: |
| LBL_AccessVis=A&ccessors' Visibility: |
| LBL_AccessorsEven=&Use Accessors Even When Field Is Accessible |
| MSG_EncapsulateFieldDeclaredGetter=The getter is already declared in {0}. |
| MSG_EncapsulateFieldDeclaredSetter=The setter is already declared in {0}. |
| MSG_EncapsulateFieldFinalFieldWarning=Final field! |
| MSG_EncapsulateFieldInsertPointMethod=After {0} |
| EncapsulateFieldPanel.jComboInsertPoint.default=Varsay\u0131lan |
| EncapsulateFieldPanel.jComboInsertPoint.first=First Method |
| EncapsulateFieldPanel.jComboInsertPoint.last=Last Method |
| EncapsulateFieldPanel.jComboInsertPoint.acsd=YOK |
| EncapsulateFieldPanel.jButtonSelectAll.acsd=YOK |
| EncapsulateFieldPanel.jButtonSelectNone.acsd=YOK |
| EncapsulateFieldPanel.jButtonSelectGetters.acsd=YOK |
| EncapsulateFieldPanel.jButtonSelectSetters.acsd=YOK |
| EncapsulateFieldPanel.jButtonSelectSetters.text=Select &Setters |
| EncapsulateFieldPanel.jLblInsertPoint.text=&Insert Point: |
| EncapsulateFieldPanel.jButtonSelectNone.text=Select &None |
| EncapsulateFieldPanel.jButtonSelectAll.text=Select &All |
| EncapsulateFieldPanel.jButtonSelectGetters.text=Select &Getters |
| EncapsulateFieldPanel.jLblSort.text=Sort &By: |
| EncapsulateFieldPanel.jComboSort.acsd=YOK |
| EncapsulateFieldPanel.jComboSort.pairs=Getter/Setter pairs |
| EncapsulateFieldPanel.jComboSort.alphabetically=Method names |
| EncapsulateFieldPanel.jComboSort.gettersFirst=Getters then Setters |
| EncapsulateFieldPanel.jLblJavadoc.text=&Javadoc: |
| EncapsulateFieldPanel.jComboJavadoc.acsd=YOK |
| EncapsulateFieldPanel.jComboJavadoc.none=Hi\u00e7biri |
| EncapsulateFieldPanel.jComboJavadoc.createDefault=Create default comments |
| EncapsulateFieldPanel.jComboJavadoc.copy=Copy from field |
| |
| # Error panel |
| LBL_ErrorPanelDescription=The following warnings and errors were found. You can continue only with warnings. |
| LBL_ErrorsList=&List of Errors |
| LBL_FatalError=Hata |
| LBL_NonFatalError=Uyar\u0131 |
| LBL_Project=Pr&oject: |
| LBL_Location=&Konum\: |
| LBL_FindUsages=Find &Usages |
| LBL_FindOverridingMethods=Find &Overriding Methods |
| LBL_UsagesOfBaseClass=&Search from Base Class [{0}] |
| LBL_FindAllSubtypes=Find &All Subtypes |
| LBL_FindDirectSubtypesOnly=Find &Direct Subtypes Only |
| LBL_Usages=Kullan\u0131mlar |
| LBL_Refactoring=Refactoring |
| |
| # accessibility |
| ACSD_subclasses=YOK |
| ACSD_usages=YOK |
| ACSD_directOnly=YOK |
| ACSD_isBaseClass=YOK |
| ACSD_overriders=YOK |
| ACSD_ChangeParsAdd=Add parameter |
| ACSD_paramTable=YOK |
| ACSD_modifiersCombo=YOK |
| ACSD_ChangeParsRemove=YOK |
| ACSD_ChangeParsMoveUp=YOK |
| ACSD_ChangeParsMoveDown=YOK |
| ACSD_nameField=Type new name |
| ACSD_jTableFields=YOK |
| ACSD_useAccessors=YOK |
| ACSD_fieldModifiers=YOK |
| ACSD_methodAcc=YOK |
| ACSD_projectsCombo=YOK |
| ACSD_rootCombo=YOK |
| ACSD_usagesPanel=YOK |
| ACSD_usagesTree=YOK |
| ACSD_ErrorPanelName=YOK |
| ACSD_ErrorPanelDescription=The following warnings and errors were found. You can continue only with warnings. |
| ACSD_ProblemDescriptionName=YOK |
| ACSD_ProblemDescriptionDescription=YOK |
| ACSD_DestinationSupertypeName=Destination Supertype |
| ACSD_DestinationSupertypeDescription=YOK |
| ACSD_MembersToPullUp=Members To Pull Up |
| ACSD_MembersToPullUpDescription=Select members to Pull Up |
| ACSD_MembersToPushDown=Members To Push Down |
| ACSD_MembersToPushDownDescription=Select members to Push Down |
| ACSD_DeclareFieldName=Declare Field For Current Outer Class |
| ACSD_DeclareFieldDescription=Declare Field For Current Outer Class |
| ACSD_InnerClassName=Inner Class Name |
| ACSD_InnerClassNameDescription=Inner Class Name |
| ACSD_DeclareStatic=Declare Static |
| ACSD_DeclareStaticDescription=Declare Static |
| ACSD_InterfaceName=Interface Name |
| ACSD_InterfaceNameDescription=Interface Name |
| ACSD_MembersToExtract=Members To Extract |
| ACSD_MembersToExtractDescription=Members To Extract Description |
| ACSD_SupeclassName=Superclass Name |
| ACSD_SuperclassNameDescription=Superclass name |
| ACSD_SupertypeToUse=Supertype To Use |
| ACSD_SupertypeToUseDescription=Select Supertype to Use |
| |
| |
| LBL_ThisClass=This Class\: |
| |
| # PackageDisplayUtils |
| |
| LBL_SearchInComents=Search in &Comments |
| |
| LBL_UsagesWindow=Find Usages Results |
| LBL_RefactoringWindow=Refactoring Preview |
| |
| LBL_RenameWithoutRefactoring=Rename &Without Refactoring |
| LBL_MoveWithoutReferences=Move &Without Refactoring |
| |
| # --- GENERAL ------------------------------------------------------------------ |
| # "Selected" column label |
| LBL_Selected= |
| LBL_NotAvailable=<not available> |
| |
| # --- SAFE DELETE REFACTORING -------------------------------------------------- |
| # Refactoring name |
| LBL_SafeDel=Safely Delete |
| # Refactoring description (0 = Name(s) of Elements to be deleted) |
| DSC_SafeDel=Delete element(s) and keep references to them, if any. |
| DSC_SafeDelClasses=Delete classes and and keep references to them, if any. |
| DSC_SafeDelMethod=Delete method <b>{0}</b> and keep references to that method, if any. |
| DSC_SafeDelMethods=Delete methods and keep keep references to them, if any. |
| DSC_SafeDelProblem=There are references to <b>{0}</b>. |
| DSC_SafeDelPkg=Delete package <b>{0}</b> and its contents. |
| # Action label |
| |
| LBL_SafeDel_Delete=Sil |
| LBL_SafeDel_Classes=<html>Search for usages and delete {0} classes</html> |
| LBL_SafeDel_Elements=<html>Search for usages and delete {0} elements</html> |
| LBL_SafeDel_RegularDelete=<html>Delete {0} classes</html> |
| LBL_SafeDel_RegularDeleteElement=<html>Delete {0}</html> |
| LBL_SafeDel_Element=<html>Search for usages and delete <b>{0}</b>.</html> |
| LBL_SafeDelCheckBox=Sa&fely delete (with usage search) |
| LBL_SafeDelHeader=<html>Safely delete <b>{0}</b>.</html> |
| LBL_SafeDelInComents=&Search In Comments |
| LBL_SafeDelRefWarning=<html>Warning: Attempting to delete <b>{0}</b> from a reference.</html> |
| LBL_SafeDelConstructor=<html>Safely delete constructor <b>{0}</b> of class <b>{1}</b>.</html> |
| LBL_SafeDelVariable=<html>Safely delete variable <b>{0}</b>.</html> |
| LBL_SafeDelMethod=<html>Safely delete method <b>{0}</b> of class <b>{1}</b>.</html> |
| LBL_SafeDelField=<html>Safely delete field <b>{0}</b> of class <b>{1}</b>.</html> |
| LBL_SafeDelPkg=<html>Delete package <b>{0}</b> and its contents.</html> |
| LBL_SafeDelFolder=<html>Safely delete folder <b>{0}</b> and its contents.</html> |
| SafeDeletePanel.safeDelete.AccessibleContext.accessibleDescription=YOK |
| |
| # --- EXTRACT INTERFACE -------------------------------------------------------- |
| LBL_ExtractInterface=Extract Interface |
| DSC_ExtractInterface=Extract Interface <b>{0}</b> |
| LBL_ExtractInterface_Action=Extract &Interface... |
| LBL_ExtractInterfaceHeader=Extract Interface - {0} |
| LBL_ExtractInterface_Name=Interface &Name\: |
| LBL_ExtractInterfaceLabel=&Members to Extract\: |
| LBL_ExtractInterface_Member=Member |
| |
| # --- EXTRACT SUPER CLASS -------------------------------------------------------- |
| LBL_ExtractSC=Extract Superclass |
| DSC_ExtractSC=Extract Superclass <b>{0}</b> |
| LBL_ExtractSC_Action=&Extract Superclass... |
| LBL_ExtractSCHeader=Extract Superclass - {0} |
| LBL_ExtractSC_Name=Superclass &Name\: |
| LBL_ExtractSCLabel=&Members to Extract\: |
| LBL_ExtractSC_Member=Member |
| LBL_ExtractSC_MakeAbstract=Make Abstract |
| |
| # --- PULL UP REFACTORING ------------------------------------------------------ |
| # Refactoring name |
| LBL_PullUp=Pull Up |
| # Refactoring description (0 = source type name) |
| DSC_PullUp=Pull Up Members Of <b>{0}</b> |
| # Action label |
| LBL_PullUp_Action=Pull &Up... |
| # *** Refactoring panel *** |
| # Supertype combobox label |
| LBL_PullUp_Supertype=Destination &Supertype\: |
| # "Selected" column label |
| LBL_PullUp_Selected= |
| # "Member" column label |
| LBL_PullUp_Member=Member |
| # "Make Abstract" column label |
| LBL_PullUp_MakeAbstract=Make Abstract |
| |
| LBL_PullUpHeader=Pull Up Members of "{0}" |
| LBL_PullUpLabel=&Members to Pull Up: |
| |
| # --- PUSH DOWN REFACTORING ---------------------------------------------------- |
| # Refactoring name |
| LBL_PushDown=Push Down |
| # Refactoring description (0 = source type name) |
| DSC_PushDown=Push Down Members Of <b>{0}</b> |
| # Action label |
| LBL_PushDown_Action=Push &Down... |
| # Window header |
| LBL_PushDown_Header=Push Down Members of "{0}" |
| LBL_PushDownLabel=&Members to Push Down: |
| LBL_PushDown_KeepAbstract=Keep Abstract |
| |
| # --- USE SUPER TYPE -------------------------------------------------------- |
| LBL_UseSuperType=&Use Supertype Where Possible |
| LBL_UseSyperTypeTitle=Use Supertype Where Possible - {0} |
| LBL_UseSuperType_Action=Use Supertype &Where Possible... |
| DSC_UseSuperType=Supertype to Use: |
| # *** Refactoring panel *** |
| LBL_UseSuperType_In_Comments=&Apply Rename on Comments |
| |
| # --- MOVE INNER TO OUTER REFACTORING ------------------------------------------------------ |
| # Refactoring name |
| LBL_InnerToOuter=Move Inner to Outer Level |
| # Refactoring description (0 = source type name) |
| DSC_InnerToOuter=Move <b>{0}</b> to Outer Level |
| # Action label |
| LBL_InnerToOuter_Action=Move Inner to Outer &Level... |
| LBL_InnerToOuter_ClassName=&Class Name\: |
| LBL_InnerToOuterHeader=Move "{0}" to Outer Level |
| LBL_InnerToOuter_DeclareField=&Declare Field for the Current Outer Class |
| LBL_InnerToOuter_FieldName=&Field Name: |
| |
| # *** Refactoring panel *** |
| |
| LBL_DeclareFinal= |
| LBL_CopyClass=Copy Class |
| DSC_CopyClass=Copy Class <b>{0}</b> |
| LBL_CopyWithoutRefactoring=&Copy Without Refactoring |
| #CopyClassPanel.newNameTextField.text=NewClass |
| CopyClassPanel.isUpdateReferences.AccessibleContext.accessibleDescription=YOK |
| CopyClassPanel.newNameTextField.AccessibleContext.accessibleDescription=YOK |
| CopyClassPanel.packageComboBox.AccessibleContext.accessibleDescription=YOK |
| CopyClassPanel.rootComboBox.AccessibleContext.accessibleDescription=YOK |
| CopyClassPanel.projectsComboBox.AccessibleContext.accessibleDescription=YOK |
| |
| # Rename class |
| LBL_RenameClassDO=Rename file, class, and constructors to {0} |
| LBL_RenameClass=Rename class and constructors to {0} |
| LBL_RenameMethod=Rename method to {0} |
| LBL_RenameField=Rename field to {0} |
| LBL_RenameParameter=Rename parameter to {0} |
| LBL_RenameLocVariable=Rename local variable to {0} |
| LBL_RenameAttribute=Rename attribute to {0} |
| LBL_RenameTypeParameter=Rename type parameter to {0} |
| LBL_RenameEnum=Rename enumeration to {0} |
| LBL_RenameAnnotationType=Rename annotation type to {0} |
| LBL_RenameFolder=Rename folder "{0}" to "{1}" |
| |
| LBL_chngsigdecl=Change {0} parameters of {1} |
| |
| LBL_Scope=Sco&pe\: |
| LBL_AllProjects=Open Projects |
| |
| ExtractSuperclassPanel.nameLabel.AccessibleContext.accessibleDescription=YOK |
| |
| ExtractSuperclassPanel.chooseLabel.AccessibleContext.accessibleDescription=YOK |
| |
| ExtractInterfacePanel.chooseLabel.AccessibleContext.accessibleDescription=YOK |
| |
