| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| ## Resource bundle for package org.netbeans.modules.profiler.actions |
| #Mon May 03 18:59:38 CEST 2004 |
| |
| AdvancedOption_DisplayName=EntityBean Profiler Settings |
| AdvancedOption_Tooltip=Customize the profiling settings |
| AntActions_FileTestNotFoundMsg=Test for the file does not exist. |
| AntActions_FailedDetermineJavaPlatformMsg=Failed to determine version of Java platform\: {0} |
| AntActions_FailedDetermineProjectBuildScriptMsg=Cannot determine build script for project {0} |
| AntActions_IncorrectJavaSpecVersionDialogCaption=Varning |
| AntActions_IncorrectJavaSpecVersionDialogMsg=The specification version of project Java Platform is greater than specification version of the\nplatform that will be used for profiling. You may experience problems unless you set the compiler\nparameter to generate bytecode compatible with the platform that will be used.\n\nDo you want to continue with the current settings? |
| AntActions_UnsupportedProjectTypeMsg=Profiling this project type is not supported. |
| AntActions_InvalidJavaplatformMsg=Failed to determine overridden platform\: {0} |
| |
| CompareSnapshotsAction_ActionName=&Compare Memory Snapshots... |
| CompareSnapshotsAction_ActionDescr=Computes the difference between two comparable memory snapshots |
| CompareSnapshotsAction_SelectDialogCaption=Select Snapshot to Compare |
| CompareSnapshotsAction_OpenChooserCaption=Open Snapshot |
| CompareSnapshotsAction_OpenChooserFilter=Profiler Snapshot File (*.{0}) |
| CompareSnapshotsAction_NoComparableSnapshotsFoundMsg=<No comparable snapshots found> |
| CompareSnapshotsAction_ComparingSameSnapshotsMsg=The snapshot cannot be compared to itself. |
| CompareSnapshotsAction_DifferentSnapshotTypeMsg=Snapshots must be of same type. |
| CompareSnapshotsAction_DifferentSnapshotsTypeMsg=Snapshots must be of same type. |
| CompareSnapshotsAction_OnlyMemorySnapshotsMsg=Only memory snapshots can be compared! |
| CompareSnapshotsAction_DifferentObjectsCountMsg=Track every N object allocations value doesn't match! |
| CompareSnapshotsAction_DifferentObjectsCountsMsg=Track every N object allocations values don't match! |
| CompareSnapshotsAction_InvalidFileMsg=Invalid snapshot file |
| CompareSnapshotsAction_InvalidFilesMsg=Invalid snapshot file(s) |
| CompareSnapshotsAction_EnterFileMsg=Enter snapshot file |
| CompareSnapshotsAction_OkButtonText=OK |
| CompareSnapshotsAction_SelectSnapshotString=<html><b><nobr>Select snapshot to compare\:</nobr></b></html> |
| CompareSnapshotsAction_SelectSnapshotsString=Specify snapshots you want to compare |
| CompareSnapshotsAction_FromProjectRadioText=From &project\: |
| CompareSnapshotsAction_OnlyComparableListedString=Note\: only comparable snapshots are listed |
| CompareSnapshotsAction_FromFileRadioText=From &file\: |
| CompareSnapshotsAction_BrowseButtonText=&Browse |
| CompareSnapshotsAction_Browse2ButtonText=B&rowse |
| CompareSnapshotsAction_BrowseButtonAccessDescr=Select snapshot file |
| CompareSnapshotsAction_Snapshot1String=Snapshot &1\: |
| CompareSnapshotsAction_Snapshot2String=Snapshot &2\: |
| CompareSnapshotsAction_SnapshotAccessDescr=Selected snapshot file |
| CompareSnapshotsAction_SnapshotsListAccessDescr=List of comparable snapshots in current project |
| |
| FindNextAction_ActionName=S\u00f6k n\u00e4sta |
| FindNextAction_ActionDescr=Find Next Occurence (F3) |
| |
| FindPreviousAction_ActionName=S\u00f6k f\u00f6reg\u00e5ende |
| FindPreviousAction_ActionDescr=Find Previous Occurence (Shift+F3) |
| |
| GetCmdLineArgumentsAction_TargetJvmInactiveMsg=Target JVM is inactive |
| GetCmdLineArgumentsAction_JvmArgumentsString=JVM arguments\: |
| GetCmdLineArgumentsAction_MainClassAndArgsString=Main class (JAR) and its arguments\: |
| |
| HeapDumpAction_ActionName=Take &Heap Dump... |
| HeapDumpAction_RequiredJdkMsg=The profiled application must be run on JDK 1.6, 1.7 or 1.5.0_12 to take a heap dump |
| HeapDumpAction_RemoteUnsupportedMsg=Taking heap dump on a remote machine not supported. |
| HeapDumpAction_WrongDestinationMsg=Dumping heap failed, cannot resolve destination file. |
| HeapDumpAction_DumpingHeapText=Dumping heap... |
| HeapDumpAction_SavedDialogCaption=Heap Dump Saved |
| HeapDumpAction_SavedDialogText=<html><b>The heap has been successfuly saved to a file.</b><br>Do you want to open it in HeapWalker?</html> |
| HeapDumpAction_DumpingFailedMsg=Taking heap dump failed. See NetBeans logfile for details. |
| HeapDumpAction_DestinationDialogCaption=Choose Heap Dump Destination |
| HeapDumpAction_LocationProjectString=Profiled project |
| HeapDumpAction_LocationGlobalString=Default storage for Global Attach |
| HeapDumpAction_DirectoryDialogCaption=Choose Directory |
| HeapDumpAction_OkButtonText=OK |
| HeapDumpAction_DestinationLabelText=<html><b><nobr>Choose heap dump destination:</nobr></b></html> |
| HeapDumpAction_DefaultLocationRadioText=Default location |
| HeapDumpAction_CustomLocationRadioText=Custom directory\: |
| HeapDumpAction_BrowseButtonText=Bl\u00e4ddra |
| |
| JavaPlatformSelector_OkButtonName=OK |
| JavaPlatformSelector_UseSelPlatformChckBoxName=Always use the selected platform for profiling |
| JavaPlatformSelector_NoSupportedPlatformMsg=None of the installed Java Platforms can be used for profiling.\nNetBeans Profiler requires JDK 5.0 Update 4 and newer.\n\nPlease install a suitable Java Platform and run calibration again. |
| JavaPlatformSelector_SelectPlatformCalibrateMsg=Select Java Platform to calibrate\: |
| JavaPlatformSelector_SelectPlatformCalibrateDialogCaption=Select Java Platform to calibrate |
| JavaPlatformSelector_SelectPlatformProfileMsg=Please select Java Platform to use\: |
| JavaPlatformSelector_SelectPlatformProfileDialogCaption=Select Java Platform for Profiling |
| JavaPlatformSelector_CannotUsePlatform=The Java Platform this project runs on cannot be used for profiling. |
| JavaPlatformSelector_ListAccessName=List of Java Platforms available for profiling |
| |
| LoadSnapshotAction_ActionName=&Load Snapshot... |
| LoadSnapshotAction_ActionDescr=Load profiling results snapshot from disk |
| LoadSnapshotAction_OpenSnapshotDialogCaption=Open Snapshot File |
| LoadSnapshotAction_ProfilerSnapshotFileFilter=Profiler Snapshot Files (*.{0}) |
| LoadSnapshotAction_OpenSnapshotHeapdumpDialogCaption=Open Snapshot or Heap Dump |
| LoadSnapshotAction_ProfilerSnapshotHeapdumpFileFilter=Profiler Snapshot or Heap Dump Files (*.{0} | *.{1}) |
| LoadSnapshotAction_No_Snapshot_Selected=Not a .nps snapshot file |
| |
| # {0} - # of selected projects (0 if disabled), or -1 if main project |
| # {1} - project name, if exactly one project |
| LBL_ProfileMainProjectAction=&Profile {0,choice,-1#Main Project|0#Project|1#Project ({1})|1<{0} Projects}... |
| HINT_ProfileMainProjectAction=Profile (Main) Project |
| LBL_AttachMainProjectAction=&Attach Profiler... |
| HINT_AttachMainProjectAction=Attach Profiler... |
| LBL_AttachProjectAction=Attach Profiler Using Project {0,choice,0#|1#"{1}"|1<} |
| |
| LBL_ProfileAction=Profile... |
| HINT_ProfileAction=Profile... |
| LBL_ProfileAction_40=Profile File... |
| HINT_ProfileAction_40=Profile File... |
| LBL_ProfileSingleAction40=Pro&file {0,choice,0#File|1#"{1}"|1<File} |
| LBL_ProfileSingleAction40_General=Profile File |
| LBL_ProfileSingleActionPopup=Profile File |
| # new |
| LBL_EnableProfilingPopup=Enable Profiling |
| # end |
| LBL_ProfileTestAction=Profile {0,choice,0#&Test for File|1#&Test for "{1}"|1<&Test for Files} |
| LBL_ProfileTestAction_General=Profile Test for File |
| LBL_ProfileProjectAction40=Profile &Project {0,choice,0#|1#"{1}"|1<} |
| LBL_ProfileProjectAction40_General=Profile Project |
| LBL_ProfileProjectActionPopup=Profile |
| |
| LBL_AttachAction=Attach Profiler... |
| HINT_AttachAction=Attach Profiler... |
| LBL_DetachAction=Detach... |
| HINT_DetachAction=Detach from the Profiled Application |
| LBL_ModifyProfilingAction=&Modify Profiling Session... |
| HINT_ModifyProfilingAction=Modify Profiling Session... |
| LBL_PauseAction=Pause |
| HINT_PauseAction=Pause |
| LBL_RerunAction=&Rerun Profiling Session |
| HINT_RerunAction=Rerun Last Profiling Session |
| LBL_ResetResultsAction=R&eset Collected Results |
| HINT_ResetResultsAction=Reset Collected Results Buffer |
| LBL_RunGCAction=Run &GC |
| HINT_RunGCAction=Run Garbage Collection in Profiled Application |
| LBL_StopAction=&Stop Profiling Session |
| HINT_StopAction=Stop (Terminate) the Profiled Application |
| LBL_ShowTelemetryViewAction=&VM Telemetry |
| HINT_ShowTelemetryViewAction=Show VM Telemetry View |
| LBL_AttachWizardAction=Attach Wizard... |
| HINT_AttachWizardAction=Attach Wizard... |
| LBL_ShowLiveResultsWindowAction=&Live Results |
| HINT_ShowLiveResultsWindowAction=Show Live Results Window |
| LBL_TakeSnapshotAction=&Take Snapshot of Collected Results |
| HINT_TakeSnapshotAction=Take Snapshot of Collected Results |
| LBL_ControlPanelAction=Profiler &Control Panel |
| HINT_ControlPanelAction=Show Profiler Control Panel |
| LBL_AddRootMethodAction=Add As Profiling Root Method... |
| HINT_AddRootMethodAction=Add As Profiling Root Method... |
| LBL_SelectRootMethodsAction=Select Profiling Root Methods... |
| HINT_SelectRootMethodsAction=Select Profiling Root Methods... |
| LBL_GetCmdLineArgumentsAction=&View Command-line Arguments |
| HINT_GetCmdLineArgumentsAction=View Command-line Arguments |
| LBL_RunCalibrationAction=&Run Profiler Calibration |
| HINT_RunCalibrationAction=Run Profiler Calibration |
| LBL_InternalStatsAction=&Display Internal Statistics |
| HINT_InternalStatsAction=Display Internal Statistics |
| LBL_TelemetryOverviewAction=Telemetry &Overview |
| HINT_TelemetryOverviewAction=Telemetry Overview |
| MSG_NotAvailableNow=Not available at this time: {0} |
| LBL_UnintegrateProfilerAction=&Unintegrate Profiler from {0,choice,0#Project|1#\"{1}\"|1<Projects} |
| |
| Menu/Profile=&Profile |
| Menu/Profile/ProfileOther=Profile &Other |
| Menu/Profile/View=Vi&sa |
| Menu/Profile/Advanced=A&dvanced Commands |
| Menu/Profile/Help=&Hj\u00e4lp |
| Menu/Window/Profile=Profilin&g |
| Menu/Profile/Help/profiler-website.url=Profiler Project &Website... |
| Menu/Profile/Help/nb-log-file.url=NetBeans Lo&g File |
| Toolbars/Profile=Profile |
| Actions/Profile/profiler-website.url=Profiler Project Website |
| Actions/Profile=Profile |
| Editors/text/x-java/Popup/Profiling=Profiling |
| |
| CAPTION_JVMandMainClassCommandLineArguments=JVM and Main Class Command-line Arguments |
| CAPTION_InternalStatisticsInstrHotswap=Internal Statistics of Instrumentation and Hotswapping Operations |
| MSG_NoMainMethod=Cannot start profiling.\nSelected class does not contain the "main" method. |
| MSG_CannotFindHelp=Cannot find Profiler help |
| MSG_CannotFindHelpFile=Cannot find Profiler help file\:\n{0} |
| MSG_ReRunOnProfile=Profiling session is currently in progress.\nDo you want to stop the current session and start it again? |
| CAPTION_Question=Fr\u00e5ga |
| MSG_ReRunOnAttach=Profiling session is currently in progress\nDo you want to detach from the target application and rerun the last profiling session? |
| MSG_CalibrationOnProfile=Profiling session is currently in progress.\nDo you want to stop the current session and perform the calibration? |
| MSG_CalibrationOnAttach=Profiling session is currently in progress\nDo you want to detach from the target application and perform the calibration? |
| MSG_CalibrationFailed=Calibration failed.\nPlease check your setup and run the calibration again. |
| MSG_CannotFindWhatsNew=Cannot find What's New file\:\n{0} |
| MSG_CannotAddAbstractNativeCodeFragment=Cannot add code fragment from an abstract or native method. |
| MSG_CannotAddAbstractNativeProfilingRoot=Cannot add abstract or native method as profiling roots. |
| MSG_NoClassToProfile=No class to profile |
| MSG_NoMethodFoundAtPosition=No method found at current position. |
| |
| ProfilingSupport_StopStartProfileSessionMessage=Profiling session is currently in progress.\nDo you want to stop the current session and start a new one? |
| ProfilingSupport_StopStartAttachSessionMessage=Profiling session is currently in progress\nDo you want to detach from the target application and start a new profiling session? |
| ProfilingSupport_FailedLoadSettingsMsg=Failed to load attach settings\: {0} |
| |
| SelectRootMethodsAction_NoClassFoundMsg=Unable to select root method. No class found at current location. |
| |
| ShowThreadsViewAction_ActionName=&Threads |
| ShowThreadsViewAction_ActionDescr=Show Threads View |
| |
| StopAction_DoYouWantToTerminateMsg=Do you want to terminate the profiled application upon detach? |
| |
| MSG_ProblemSelectingRootMethods=Cannot get list of methods for selected item. This can happen for items placed in directory other than project sources directory (typically /src and /web). If so, please select appropriate item in project sources directory. |
| MSG_ProblemAddingRootMethod=Cannot add selected method as a root method. This can happen for items placed in directory other than project sources directory (typically /src and /web). If so, please select appropriate item in project sources directory. |
| MSG_ProblemAddingCodeFragment=Cannot add selected method as a code fragment. This can happen for items placed in directory other than project sources directory (typically /src and /web). If so, please select appropriate item in project sources directory. |
| MSG_StartingProfiler=Starting Profiler |
| MSG_CollectingCategories=Collecting categories. V\u00e4nta. |
| AntActions_LazyEnablementFailure=<html><b>Unable to start profiling.</b><br><br>Please, make sure the project type is supported</p><p>and/or the selected file can be executed. |
| |
| AntActions_LazyEnablementProgressMessage=Validating profiler action |
| SelfSamplerAction_ActionNameStart=Start sampling IDE |
| SelfSamplerAction_ActionNameStop=Stop sampling and take snapshot |
| SelfSamplerAction_ActionDescription=Will take a snapshot based on the thread dump |
| SelfSamplerAction_ThreadName=IDE Self Sampler |
| |
