| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| ##BackoutAction.java |
| CTL_MenuItem_Backout = &Backout... |
| ##RollbackAction.java |
| CTL_MenuItem_Rollback = &Rollback |
| CTL_MenuItem_RollbackRoot = &Rollback - {0} |
| ##StripAction.java |
| CTL_MenuItem_Strip = &Strip... |
| ##VerifyAction.java |
| CTL_MenuItem_Verify = &Verify |
| |
| MSG_ROLLBACK_PROGRESS = Rollback... |
| MSG_NO_ROLLBACK = Nothing to rollback, can only rollback after: commit, pull, push (with this repository as destination) |
| MSG_ROLLBACK_INFO = INFO Rollback rolls back the last transaction in this repository and can only rollback one level. |
| MSG_ROLLBACK_TITLE = Mercurial Rollback |
| MSG_ROLLBACK_TITLE_SEP = -------------------- |
| MSG_ROLLBACK_INFO_SEP = Rollback in:\n{0} |
| MSG_ROLLBACK_CANCELED = INFO: Rollback canceled by user |
| MSG_ROLLBACK_DONE = INFO: End of Mercurial Rollback |
| MSG_ROLLBACK_CONFIRM = Confirm Rollback |
| MSG_ROLLBACK_CONFIRM_QUERY = Roll back the last commit, push/pull, import or unbundle in this repository.\nUse with care as there is no way to undo a rollback!\n\nDo you still want to perform a Rollback? |
| MSG_ROLLBACK_CONFIRM_UPDATE = Confirm Rollback Update |
| MSG_ROLLBACK_CONFIRM_UPDATE_QUERY = Repository Rollback has completed.\nDo a forced update of the working directory? |
| MSG_ROLLBACK_FORCE_UPDATE = Carrying out a forced update of the working directory {0} |
| MSG_ROLLBACK_MESSAGE = No Rollback Update |
| MSG_ROLLBACK_MESSAGE_NOHISTORY = Repository Rollback has completed.\nThe working directory will not be updated as the repository now has no history. |
| |
| MSG_Fetching_Revisions = Fetching Revisions... |
| MSG_Refreshing_Strip_Versions = Refreshing Strip Versions |
| |
| MSG_STRIP_TITLE = Mercurial Strip |
| MSG_STRIP_TITLE_SEP = --------------- |
| MSG_STRIP_INFO_SEP = Stripping revision {0} and descendents in:\n{1} |
| MSG_NO_REV_STRIP = \nINFO: Unable to Strip this Revision {0} |
| MSG_LOCAL_CHANGES_STRIP = \nStrip will not work if there are local changes. You can view them using Mercurial -> Status.\nINFO: If you wish to discard local changes, use Mercurial -> Update selecting the Forced Update option and rerun Strip. |
| MSG_MULTI_HEADS_STRIP = \nINFO: Strip will not work across multiple heads unless the Force multihead option is selected. |
| MSG_STRIP_RESTORE_INFO = \nINFO: Strip can be undone using the saved backup bundle. On the command line run: |
| MSG_STRIP_RESTORE_INFO2 = hg unbundle {0} |
| MSG_STRIP_PROGRESS = Strip... |
| MSG_STRIP_DONE = INFO: End of Mercurial Strip |
| |
| MSG_BACKOUT_TITLE = Mercurial Backout |
| MSG_BACKOUT_TITLE_SEP = ----------------- |
| MSG_BACKOUT_INFO_SEP = Backout revision {0} in:\n{1} |
| MSG_NO_REV_BACKOUT = \nINFO: Unable to Backout this Revision {0} |
| MSG_BACKOUT_PROGRESS = Backout... |
| MSG_BACKOUT_DONE = INFO: End of Mercurial Backout |
| MSG_UNCOMMITTED_CHANGES_BACKOUT = \nBackout will not work if there are uncommitted local changes. You can view them using Mercurial -> Status.\nINFO: If you wish to discard these changes, use Mercurial -> Update selecting the Forced Update option and rerun Backout. |
| MSG_MERGE_CSET_BACKOUT = \nCannot backout a backout merge changeset.\nINFO: Either run hg backout --parent from the command line or use Mercurial -> Rollback. |
| MSG_BACKOUT_MERGE_CONFIRM_TITLE = Confirm Merge after Backout |
| MSG_BACKOUT_MERGE_CONFIRM_QUERY = Backout has completed and Merge is Required.\nMerge the backout changeset now? |
| MSG_BACKOUT_MERGE_DO = INFO MERGE: Performing Merge with backout changeset |
| |
| MSG_VERIFY_TITLE = Mercurial Verify |
| MSG_VERIFY_TITLE_SEP = ---------------- |
| MSG_VERIFY_INFO = Verifying repository {0}... |
| MSG_VERIFY_PROGRESS = Verify... |
| MSG_VERIFY_DONE = INFO: End of Mercurial Verify |
| |
| CTL_StripForm_Action_Strip=&Strip |
| ACSD_StripForm_Action_Strip=Strip |
| ACSN_StripForm_Action_Strip=Strip |
| CTL_StripForm_Action_Cancel=&Cancel |
| ACSD_StripForm_Action_Cancel=Avbryt |
| ACSN_StripForm_Action_Cancel=Avbryt |
| CTL_StripDialog=Strip - {0} |
| ACSD_StripDialog=Strip - {0} |
| |
| StripPanel.revisionsLabel.text=Choose from &Revisions: |
| StripPanel.infoLabel.text=Strip selected revision and it's descendants from the repository |
| StripPanel.infoLabel2.text=(updates the working dir to the first parent of the stripped revision) |
| StripPanel.doBackupChxBox.text= Save a &backup so stripped revisions can be reapplied |
| StripPanel.jPanel1.border.title= Alternativ |
| StripPanel.doForcedMultiHeadStripChxBox.text=Force multi-head removal if required |
| |
| BackoutPanel.revisionsLabel.text=Choose from &Revisions: |
| BackoutPanel.infoLabel.text=Backout selected revision from the repository |
| BackoutPanel.infoLabel2.text=(creates a backout changeset to back out only this revision) |
| BackoutPanel.jPanel1.border.title= Alternativ |
| BackoutPanel.doMergeChxBox.text=Automerge the backout changeset with tip and commit |
| |
| MSG_Refreshing_Backout_Versions = Refreshing Backout Versions |
| |
| CTL_BackoutForm_Action_Backout=&Backout |
| ACSD_BackoutForm_Action_Backout=Backout |
| ACSN_BackoutForm_Action_Backout=Backout |
| CTL_BackoutForm_Action_Cancel=&Cancel |
| ACSD_BackoutForm_Action_Cancel=Avbryt |
| ACSN_BackoutForm_Action_Cancel=Avbryt |
| CTL_ChoosenRevision= Chosen &Revision: |
| CTL_BackoutDialog=Backout - {0} |
| ACSD_BackoutDialog=Backout - {0} |
| BackoutPanel.commitMsgField.text=Autocommit of backout changeset for |
| BackoutPanel.commitLabel.text=Co&mmit Msg: |
| ACSD_doBackupChxBox=Specifies a backup should be done before the strip |
| ACSD_revisionsComboBox=Specifies the revision to be stripped |
| ACSD_revisionsComboBoxBackout=Specifies the revision to be backed out |
| ACSD_commitMsgField=Specifies the commit message to be used for backout changeset |
| |
