src/sq/platform/org-openide-filesystems/netbeans/core/org-openide-filesystems/org/openide/filesystems/Bundle_sq.properties

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
#
# Copyright 1997-2007 Sun Microsystems, Inc. All rights reserved.
#
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common
# Development and Distribution License("CDDL") (collectively, the
# "License"). You may not use this file except in compliance with the
# License. You can obtain a copy of the License at
# http://www.netbeans.org/cddl-gplv2.html
# or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the
# specific language governing permissions and limitations under the
# License.  When distributing the software, include this License Header
# Notice in each file and include the License file at
# nbbuild/licenses/CDDL-GPL-2-CP.  Sun designates this
# particular file as subject to the "Classpath" exception as provided
# by Sun in the GPL Version 2 section of the License file that
# accompanied this code. If applicable, add the following below the
# License Header, with the fields enclosed by brackets [] replaced by
# your own identifying information:
# "Portions Copyrighted [year] [name of copyright owner]"
#
# Contributor(s):
#
# The Original Software is NetBeans. The Initial Developer of the Original
# Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun
# Microsystems, Inc. All Rights Reserved.
#
# If you wish your version of this file to be governed by only the CDDL
# or only the GPL Version 2, indicate your decision by adding
# "[Contributor] elects to include this software in this distribution
# under the [CDDL or GPL Version 2] license." If you do not indicate a
# single choice of license, a recipient has the option to distribute
# your version of this file under either the CDDL, the GPL Version 2 or
# to extend the choice of license to its licensees as provided above.
# However, if you add GPL Version 2 code and therefore, elected the GPL
# Version 2 license, then the option applies only if the new code is
# made subject to such option by the copyright holder.



# manifest
OpenIDE-Module-Name=API-t\u00eb e Sistemit t\u00eb Skedar\u00ebve
OpenIDE-Module-Display-Category=Infrastruktura
OpenIDE-Module-Short-Description=API-t\u00eb e Sistemit t\u00eb skedar\u00ebve virtual.
OpenIDE-Module-Long-Description=Lejon qasjen n\u00eb skeda si burime n\u00eb nj\u00eb m\u00ebnyr\u00eb t\u00eb pavarur nga skedar\u00ebt e SO aktual. P\u00ebrkrah njoftimin e ndryshimeve n\u00eb disk



# {0} = system name of the filesystem
LAB_FileSystemInvalid=Pavlefsh\u00ebm {0}
# {0} = system name of the filesystem
LAB_FileSystemValid={0}
# {0} = name of the file
# LAB_FileInvalid={0}

# {0} = file to the root
EXC_RootNotExist=Rr\u00ebnja {0} nuk ekziston.

# {0} - filesystem
EXC_CannotDeleteRoot=Nuk mund t\u00eb fshij rr\u00ebnj\u00ebn e skedarsistemit {0}.

# {0} = name of FS
EXC_CannotRenameRoot=Nuk mund ta riem\u00ebrtoj rr\u00ebnj\u00ebn e skedarsistemit {0}.


# {0} - folder that cannot be deleted
# {1} - filesystem
EXC_CannotDelete=Nuk mund ta fshij skedarin {0} n\u00eb {1}.

# {0} - folder that cannot be deleted
# {1} - filesystem
# {2} - one file that is in the folder
# EXC_CannotDeleteNotEmpty=Cannot delete folder {0} in {1}. Folder is not empty (file {2} exists in the folder).


# {0} = original name of the file
# {1} = name of FS
# EXC_BadName=File {0} in {1} cannot be renamed to name without extension.

# {0} = original name of the file
# {1} = name of FS
# {2} = new name of the file (with extension)
EXC_CannotRename=Nuk mund t\u00eb riem\u00ebrtoj skedarin {0} n\u00eb {1} te {2}.

# {0} = display name of the filesystem
EXC_FSisRO=Skedarsistemi {0} \u00ebsht\u00eb vet\u00ebm-lexim.

# {0} = name of the file
# {1} = filesystem
EXC_FisRO=Skedari {0} n\u00eb {1} \u00ebsht\u00eb  vet\u00ebm-lexim.

# {0} = name of the file
# {1} = name of "not folder"
# {2} = filesystem
EXC_FoNotFolder=Nuk mund t\u00eb krijoj skedarin {0} sepse {1} n\u00eb skedarsistemin {2} nuk \u00ebsht\u00eb nj\u00eb dosje.

# {0} = name of the folder
EXC_SlashNotAllowed=Slash n\u00eb emrin e dosjes {0} nuk \u00ebsht\u00eb i lejuar

# {0} = name of file to create
# {1} = filesystem
# {2} = full system name of the file
EXC_FolderAlreadyExist=Dosja {0} tanim\u00eb ekziston n\u00eb {1} ({2}).

# {0} = name of file to create
# {1} = filesystem
# {2} = full system name of the file
EXC_CannotCreateF=Nuk mund ta krijoj\u00eb dosjen {0} n\u00eb {1} ({2}).

# {0} = name of the file to create folder in
# {1} = name of the filesystem
# {2} = name of the file to create
# {3} = extension of the file to create
# EXC_CannotCreateFinData=Cannot create {2}.{3} in file {0} on filesystem {1}.

# {0} = name of file to create
# {1} = filesystem
# {2} = full system name of the file
EXC_DataAlreadyExist=File {0} already exists in filesystem {1} ({2}).

# {0} = name of the folder to create in
# {1} = filesystem
# {2} = name of the file to create
# {3} = extension of the file to create
EXC_CannotCreateD=Nuk mund t\u00eb krijoj skedarin {2}.{3} n\u00eb dosjen {0} n\u00eb skedarsistemin {1}.

# {0} = instance of tested lock
# {1} = name of the file
# {2} = filesystem
# {3} = instance of current lock
EXC_InvalidLock=Dry i pavlefsh\u00ebm [{0}] p\u00ebr skedrin {1} n\u00eb {2} me dryrin e tanish\u00ebm [{3}].

# When getOutputStream ().close () is called and we cannot delete the original file
# {0} name of file that we cannot delete
# EXC_CannotDeleteOriginal=Cannot delete old version of file {0}.

# When getOutputStream ().close () is called and we cannot rename the temporary file to the original one
# {0} name of file we rename from
# {1} name of file we rename to
# EXC_CannotRenameFromTo=Cannot rename new file {0} to {1}.

#FileAttributes locale
EXC_Cannot_modify=Nuk mund t\u00eb ndryshoj skedarin filesystem.attributes:


# Application error
# {0} = folder name
# {1} = name of file
EXC_ApplicationCreateError=Skedari {1} nuk mund t\u00eb gjendet n\u00eb dosjen {0}.


# Local fs
# {0} = file object name
# {1} = filesystem name
# {2} = name of java.io.File
EXC_CannotLock=Skedari {2} nuk mund t\u00eb dryroset pasi q\u00eb ai \u00ebsht\u00eb vet\u00ebm-lexim.

# JAR

# {0} = name of zip file 
EXC_FileNotExists=Skedari {0} nuk ekziston.

# {0} = name of zip file 
EXC_CanntRead=Nuk mund t\u00eb lexoj nga skedari {0}.

# {0} = name of zip file 
EXC_NotValidFile=Gabim n\u00eb skedarin {0}.

# {0} - exception text
# {1} - name of zip file
EXC_NotValidJarFile2=Gabim n\u00eb JAR skedarin {1}: {0}

# {0} - jar file
# {1} - duplicate entry name
EXC_DuplicateEntries=T\u00eb hyra t\u00eb dyfishuara n\u00eb {0}: {1}. Ju lutemi, raportoni k\u00ebt\u00eb bug n\u00eb ofruesin e skedarit jar 

#JAR_NotValidJarFileSystem=Invalid JAR.
JAR_UnknownJar=JAR i panjohur
#JAR_JarFileSystem=Jar FS
#JAR_FileName=File name
CTL_MultiFileSystem=Shum\u00eb-Skedarsistem
EXC_FileOutsideModified=Skeda {0} nuk u gjet. Nj\u00eb aplikacion tjet\u00ebr mund ta ket\u00eb zhvendosur skedarin ose e ka nd\u00ebrruar emrin.
XML_NotValidXMLFileSystem=XML Skedarsistem i pavlefsh\u00ebm.
EXC_DefAttrReadErr=Nuk mund t\u00eb lexoj DefaultAttributes.
EXC_UnreachableCode=Gabim i brendsh\u00ebm: kod i palexuesh\u00ebm.

EXC_FolderCopy=Kopjimi i dosjes nuk p\u00ebrkrahet.
XML_RootInvalid=Elementi i skedarsistemit duhet t\u00eb jet\u00eb element rr\u00ebnj\u00eb.
XML_MisssingAttr=Atributi \"name\" po mungon
XML_InaccurateParam=Num\u00ebr i pasakt\u00eb i parametrave
XML_UnknownElement=Element i panjohur.
XML_DuplElement=FileObject i Dyfishuar:

# FileUtil
# {0} - relative file path
# {1} - filesystem display name
LBL_file_in_filesystem={0} n\u00eb {1}