| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2008 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| #System file system |
| |
| Templates/Project/Ruby/railsApp.xml=Aplicativo Ruby on Rails |
| Templates/Project/Ruby/existingRailsApp.xml=Aplicativo Ruby on Rails a partir de recursos existentes |
| |
| TXT_NoRails=N\u00e3o \u00e9 um diret\u00f3rio do aplicativo Ruby on Rails |
| |
| #New project wizard |
| #TXT_DefaultPackageName=mypkg |
| RailsInstallationPanel.jrubyLabel.text=Se utilizar JRuby\: |
| RailsInstallationPanel.jrubySslLabel.text=O JRuby n\u00e3o suporta o SSL embutido usado pelo Rails. |
| RailsInstallationPanel.jrubySslLabel.installed.text=O suporte a JRuby OpenSSL parece estar instalado (vers\u00e3o: {0}). |
| RailsInstallationPanel.proxyButton.AccessibleContext.accessibleDescription=Configura\u00e7\u00f5es de proxy... |
| RailsInstallationPanel.proxyButton.text=Configura\u00e7\u00f5es de &proxy... |
| RailsInstallationPanel.railsButton.AccessibleContext.accessibleDescription=Instalar Rails |
| RailsInstallationPanel.railsDetailButton.text=&Detalhes |
| RailsInstallationPanel.sslButton.AccessibleContext.accessibleDescription=Instalar suporte JRuby OpenSSL |
| RailsInstallationPanel.sslButton.text=Instalar suporte JRuby &OpenSSL |
| RailsInstallationPanel.update.sslButton.text=Atualizar suporte a JRuby &OpenSSL |
| LAB_InstallRails=Instalar Rails |
| NoRails=Rails n\u00e3o est\u00e1 instalado. |
| NoRuby=O Ruby n\u00e3o est\u00e1 configurado corretamente. Verificar Ferramentas > Plataformas Ruby. |
| RailsOk=O Rails parece estar instalado. |
| InstallRails=Instalar &Rails |
| UpdateRails=&Atualizar Rails |
| NotFound=Rails n\u00e3o foi encontrado: {0} |
| GemProblem=O Ruby Gems n\u00e3o est\u00e1 acess\u00edvel |
| |
| #1st panel |
| LBL_NWP1_ProjectName_Label=&Nome do projeto\: |
| LBL_NWP1_ProjectLocation_Label=&Localiza\u00e7\u00e3o do Projeto: |
| LBL_NWP1_BrowseLocation_Button=Pr&ocurar... |
| LBL_NWP1_CreatedProjectFolder_Lablel=Pasta &do projeto\: |
| LBL_NWP1_SelectProjectLocation=Selecionar local do projeto |
| TXT_NameAndLoc=Nome e local |
| TXT_NewRoRApp=Aplicativo Ruby on Rails |
| TXT_RoRExtSourcesProjectLocation=Aplicativo Ruby on Rails a partir de recursos existentes |
| ACSD_NewRoRApp=Cria um novo projeto do aplicativo Ruby on Rails |
| ACSD_RoRExtSourcesProjectLocation=Cria um novo projeto do aplicativo Ruby on Rails com c\u00f3digos-fonte existentes |
| |
| |
| LAB_ConfigureProject=Nome e local |
| LAB_ConfigureDatabase=Configura\u00e7\u00e3o do banco de dados |
| LAB_IteratorName={0} de {1} |
| MSG_IllegalProjectLocation=A pasta do projeto n\u00e3o \u00e9 um caminho v\u00e1lido. |
| MSG_ProjectInRootNotSupported=A cria\u00e7\u00e3o de projetos na pasta raiz do sistema de arquivos n\u00e3o \u00e9 aceita. |
| MSG_ProjectAlreadyProject=Diret\u00f3rio de projeto j\u00e1 \u00e9 um projeto NetBeans (talvez apenas na mem\u00f3ria). |
| |
| #PanelSourceFolders |
| MSG_IllegalProjectName=O nome do projeto n\u00e3o \u00e9 um nome de pasta v\u00e1lido. |
| MSG_ProjectFolderExists=Pasta do projeto j\u00e1 existe e n\u00e3o est\u00e1 vazia. |
| MSG_ProjectFolderReadOnly=N\u00e3o \u00e9 poss\u00edvel criar a pasta do projeto. |
| MSG_ProjectFolderInvalid=N\u00e3o \u00e9 poss\u00edvel colocar o projeto em uma pasta de projeto que j\u00e1 cont\u00e9m {0}. |
| |
| # #47611: old project metadata was deleted, but the IDE still has a "live" project there |
| # (should not be an error in the future: see #42422) |
| TXT_NetBeansProject=Projeto NetBeans |
| |
| #NOI18N |
| #TXT_RailsApplication=RailsApplication{0} |
| LBL_ProjectNameAndLocationLabel=Especifique um nome e um local para um aplicativo Rails existente |
| ACSN_jPanel1=N/D |
| ACSN_projectNameLabel=Nome do projeto |
| ACSD_projectNameLabel=Nome do novo projeto |
| ACSN_projectLocationLabel=Localiza\u00e7\u00e3o do projeto\: |
| ACSD_projectLocationLabel=Localiza\u00e7\u00e3o da pasta raiz do projeto |
| ACSN_browseButton=Procurar |
| ACSD_browseButton=Clique no bot\u00e3o Procurar para abrir a janela de sele\u00e7\u00e3o do local do diret\u00f3rio. |
| ACSN_createdFolderLabel=N/D |
| ACSD_createdFolderLabel=N/A |
| ACSN_jLabel4=Especifique o nome e a localiza\u00e7\u00e3o do novo projeto. |
| ACSD_jLabel4=N/D |
| ACSD_jPanel1= |
| ACSN_optionsContainer=N/A |
| ACSD_optionsContainer=N/A |
| ACSN_locationContainer=N/A |
| ACSD_locationContainer=N/D |
| LBL_NWP1_BrowseLocation_Button3=Pr&ocurar... |
| ACSN_PanelSourceFolders=N/D |
| ACSD_PanelSourceFolders=N/A |
| ACSN_PanelProjectLocationVisual=N/A |
| ACSD_PanelProjectLocationVisual=N/A |
| ACSD_PanelOptionsVisual=N/A |
| ACSN_PanelOptionsVisual=N/A |
| |
| # PanelOptionsVisual |
| RubyPlatformLabel=&Plataforma Ruby: |
| RubyHomeBrowse=Ger&enciar... |
| PanelOptionsVisual.Server=&Servidor: |
| |
| # NewRailsProjectWizardIterator progress bar |
| LBL_NewRailsProjectWizardIterator_WizardProgress_ReadingProperties=Lendo propriedades do projeto |
| LBL_NewRailsProjectWizardIterator_WizardProgress_CreatingProject=Criando novo projeto |
| LBL_NewRailsProjectWizardIterator_WizardProgress_PreparingToOpen=Preparando novo projeto para ser aberto |
| UseJdbc=&Acessar o banco de dados utilizando JDBC |
| WarFile=Adicionar destinos &Rake para dar suporte \u00e0 implementa\u00e7\u00e3o do servidor do aplicativo (.war) |
| |
| RailsInstallationPanel.railsDetailButton.AccessibleContext.accessibleDescription=Detalhes |
| |
| LBL_DatabaseAdapter=Ada&ptador do banco de dados: |
| LBL_DevelopmentConnection=D&esenvolvimento: |
| LBL_ProductionConnection=Pr&odu\u00e7\u00e3o: |
| LBL_TestConnection=Te&ste: |
| |
| LBL_ConfigureUsingIDEConnections=&Configurar usando conex\u00f5es do IDE |
| LBL_ConfigureDirectly=E&specificar informa\u00e7\u00f5es do banco de dados diretamente |
| |
| LBL_DatabaseName=&Nome do banco de dados: |
| LBL_UserName=No&me do usu\u00e1rio: |
| LBL_Password=Sen&ha: |
| ACSD_WarFile=Adicionar destinos Rake para dar suporte \u00e0 implementa\u00e7\u00e3o do servidor do aplicativo (.war) |
| ACSD_Server=Servidor |
| ACSD_RubyPlatformLabel=Plataforma Ruby |
| ASCD_UseJdbc=Acessar o banco de dados utilizando JDBC |
| ACSD_ConfigureUsingIDEConnections=Configurar usando conex\u00f5es do IDE |
| ACSD_ConfigureDirectly=Especificar informa\u00e7\u00f5es do banco de dados diretamente |
| ACSD_DatabaseAdapter=Adaptador do banco de dados |
| ACSD_DevelopmentConnection=Desenvolvimento |
| ACSD_ProductionConnection=Produ\u00e7\u00e3o |
| ACSD_TestConnection=Teste |
| ASCD_DatabaseName=Nome do banco de dados |
| ASCD_UserName=Nome do banco de dados |
| ASCD_Password=Senha |
| ASCN_RailsAdapterPanel=N/D |
| ASCN_JdbcPanel=N/A |
| ASCD_RailsAdapterPanel=N/A |
| ASCD_JdbcPanel=N/A |
| ASCN_DatabaseConfigPanel=N/D |
| ASCD_RubyHomeBrowse=Gerenciar plataformas |
| ASCN_RubyHomeBrowse=Gerenciar |
| LBL_CreateMySqlDb_Devel=C&riar BD... |
| LBL_CreateMySqlDb_Test=Cr&iar BD... |
| LBL_CreateMySqlDb_Production=Criar &BD... |
| ASCN_CreateMySqlDb=Criar banco de dados MySQL |
| ASCD_CreateMySqlDb=Criar banco de dados MySQL |
| MSG_UnableToConnect=Imposs\u00edvel conectar ao servidor MySQL. Verifique as configura\u00e7\u00f5es nas Propriedades e tente novamente. |
| MSG_ConnectingToMySQL=Conectando a um banco de dados MySQL |
| LBL_DatabaseAccessInformation=Informa\u00e7\u00f5es de acesso ao banco de dados: |
| ASCN_DatabaseAccessInformation=Informa\u00e7\u00f5es de acesso ao banco de dados |
| ASCD_DatabaseAccessInformation=Informa\u00e7\u00f5es de acesso ao banco de dados |
| RailsInstallationPanel.railsVersionLabel.text=Vers\u00e3o do Rails: |
| RailsInstallationPanel.installWarblerButton.text=Instalar &Warbler |
| RailsInstallationPanel.updateWarblerButton.text=Atualizar &Warbler |
| RailsInstallationPanel.warblerLabel.text=O Warbler \u00e9 necess\u00e1rio para a cria\u00e7\u00e3o de arquivos WAR: |
| RailsInstallationPanel.warblerLabel.text.installed=O Warbler parece estar instalado (vers\u00e3o: {0}). |
| MSG_NoWarbler=Warbler n\u00e3o est\u00e1 instalado. |
| MSG_NoGfGem=O GlassFish Gem n\u00e3o est\u00e1 instalado. |
| MSG_NoJDK=Nenhum JDK encontrado no sistema. O Warbler precisa do JDK para criar arquivos WAR. |
| MSG_InstallWarbler=\u00c9 preciso instalar o Warbler gem para criar arquivos WAR. |
| RailsInstallationPanel.gfGemLabel.text=O GlassFish Gem n\u00e3o est\u00e1 instalado. |
| RailsInstallationPanel.installGfGemButton.text=Instalar o &GlassFish Gem |
| RailsInstallationPanel.updateGfGemButton.text=Atualizar o GlassFish Gem |
| RailsInstallationPanel.gfGemLabel.text.installed=O GlassFish Gem parece estar instalado (vers\u00e3o: {0}). |
| MSG_GfGemRequiresJDK6=O GlassFish Gem requer o JDK 6. |
| RailsInstallationPanel.withDispatchersCheckBox.text=Com emissores |
| |
