| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| |
| |
| # LayoutSupportManager |
| MSG_ERR_NonEmptyContainer=N\u00e3o \u00e9 poss\u00edvel inicializar layout para cont\u00eainer n\u00e3o vazio.\nA inst\u00e2ncia de cont\u00eainer default n\u00e3o pode conter componentes. |
| |
| # BorderLayoutSupport |
| PROP_direction=Dire\u00e7\u00e3o |
| HINT_direction=Dire\u00e7\u00e3o do componente no BorderLayout |
| |
| # GridBagLayoutSupport |
| PROP_columnWidths=Largura das Colunas |
| HINT_columnWidths=Substitui as medidas m\u00ednimas da coluna (por exemplo, [0,100,0]). |
| PROP_rowHeights=Altura das Linhas |
| HINT_rowHeights=Substitui as alturas m\u00ednimas da linha (por exemplo, [0,100,0]). |
| PROP_columnWeights=Medidas da Coluna |
| HINT_columnWeights=Substitui as dimens\u00f5es m\u00ednimas da coluna (por exemplo, [0,5, 0,5]). |
| PROP_rowWeights=Medidas da Linha |
| HINT_rowWeights=Substitui as dimens\u00f5es m\u00ednimas da linha (por exemplo, [0,5, 0,5]). |
| PROP_gridx=Grade X |
| HINT_gridx=Valor X da grade da GridBagConstraints |
| PROP_gridy=Grade Y |
| HINT_gridy=Valor Y da grade da GridBagConstraints |
| PROP_gridwidth=Largura da Grade |
| HINT_gridwidth=Valor da largura da grade da GridBagConstraints |
| PROP_gridheight=Altura da Grade |
| HINT_gridheight=Valor da altura da grade da GridBagConstraints |
| PROP_fill=Preencher |
| HINT_fill=Valor de preenchimento da GridBagConstraints |
| PROP_ipadx=Preenchimento Interno X |
| HINT_ipadx=Valor de preenchimento interno X da GridBagConstraints |
| PROP_ipady=Preenchimento Interno Y |
| HINT_ipady=Valor de preenchimento interno Y da GridBagConstraints |
| PROP_insets=Insets |
| HINT_insets=Valores de insets para a GridBagConstraints |
| PROP_anchor=Ancorar |
| HINT_anchor=Valor de \u00e2ncora da GridBagConstraints |
| PROP_weightx=Espessura X |
| HINT_weightx=Valor da espessura X da GridBagConstraints |
| PROP_weighty=Espessura Y |
| HINT_weighty=Valor da espessura Y da GridBagConstraints |
| VALUE_relative=Relativo |
| VALUE_remainder=Restante |
| VALUE_fill_none=Nenhum |
| VALUE_fill_horizontal=Horizontal |
| VALUE_fill_vertical=Vertical |
| VALUE_fill_both=Ambos |
| VALUE_anchor_center=Centro |
| VALUE_anchor_north=Norte |
| VALUE_anchor_northeast=Nordeste |
| VALUE_anchor_east=Leste |
| VALUE_anchor_southeast=Sudeste |
| VALUE_anchor_south=Sul |
| VALUE_anchor_southwest=Sudoeste |
| VALUE_anchor_west=Oeste |
| VALUE_anchor_northwest=Noroeste |
| VALUE_anchor_pagestart=Inicio da P\u00e1gina |
| VALUE_anchor_pageend=Fim da P\u00e1gina |
| VALUE_anchor_linestart=In\u00edcio da Linha |
| VALUE_anchor_lineend=Fim da Linha |
| VALUE_anchor_firstlinestart=In\u00edcio da Primeira Linha |
| VALUE_anchor_firstlineend=Fim da Primeira Linha |
| VALUE_anchor_lastlinestart=In\u00edcio da \u00daltima Linha |
| VALUE_anchor_lastlineend=Fim da \u00daltima Linha |
| VALUE_anchor_above_baseline=Acima da Linha de Base |
| VALUE_anchor_above_baseline_leading=Acima da Linha de Base \u00e0 Esquerda |
| VALUE_anchor_above_baseline_trailing=Acima da Linha de Base \u00e0 Direita |
| VALUE_anchor_baseline=Linha de Base |
| VALUE_anchor_baseline_leading=Linha de Base \u00e0 Esquerda |
| VALUE_anchor_baseline_trailing=Linha de Base \u00e0 Direita |
| VALUE_anchor_below_baseline=Abaixo da Linha de Base |
| VALUE_anchor_below_baseline_leading=Abaixo da Linha de Base \u00e0 Esquerda |
| VALUE_anchor_below_baseline_trailing=Abaixo da Linha de Base \u00e0 Direita |
| MSG_null_insets=Os insets n\u00e3o podem ser nulos. |
| |
| |
| MSG_ERR_MoreThan512=O form n\u00e3o pode ser convertido corretamente para GridBagLayout. A convers\u00e3o correta excederia o limite no n\u00famero de linhas e colunas (O GridBagLayout permite at\u00e9 512 colunas e linhas). |
| |
| # GridBagLayout customizer |
| CTL_CustomizerTitle=Personalizador de GridBagLayout |
| CTL_CloseButton=Fechar |
| CTL_HelpButton=Ajuda |
| |
| CTL_GBC_anchorPanel=Ancorar |
| CTL_GBC_fillPanel=Preencher |
| CTL_GBC_ipadPanel=I-Preenchimento |
| CTL_GBC_insetsPanel=Insets |
| CTL_GBC_gridSizePanel=Tamanho da Grade |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| CTL_GBC_fill.H=Preenchimento Horizontal |
| CTL_GBC_fill.V=Preenchimento Vertical |
| |
| CTL_GBC_ipad.HM=Horizontal -1 |
| CTL_GBC_ipad.HP=Horizontal +1 |
| CTL_GBC_ipad.VM=Vertical -1 |
| CTL_GBC_ipad.VP=Vertical +1 |
| |
| CTL_GBC_insets.topM=Superior -1 |
| CTL_GBC_insets.topP=Superior +1 |
| CTL_GBC_insets.leftP=Esquerda +1 |
| CTL_GBC_insets.leftM=Esquerda -1 |
| CTL_GBC_insets.rightM=Direita -1 |
| CTL_GBC_insets.rightP=Direita +1 |
| CTL_GBC_insets.bottomM=Inferior -1 |
| CTL_GBC_insets.bottomP=Inferior +1 |
| CTL_GBC_insets.HM=Esquerda & Direita -1 |
| CTL_GBC_insets.HP=Esquerda & Direita +1 |
| CTL_GBC_insets.VM=Superior & Inferior -1 |
| CTL_GBC_insets.VP=Superior & Inferior +1 |
| CTL_GBC_insets.BM=Tudo -1 |
| CTL_GBC_insets.BP=Tudo +1 |
| |
| CTL_GBC_gridSize.HM=-1 Coluna |
| CTL_GBC_gridSize.HP=+1 Coluna |
| CTL_GBC_gridSize.RH=Restante Horizontal |
| CTL_GBC_gridSize.VM=-1 Linha |
| CTL_GBC_gridSize.VP=+1 Linha |
| CTL_GBC_gridSize.RV=Restante Vertical |
| |
| # BoxLayoutSupport |
| PROP_axis=Eixo |
| HINT_axis=Layout do eixo |
| VALUE_axis_page=Eixo da P\u00e1gina |
| VALUE_axis_line=Eixo da Linha |
| VALUE_axis_x=Eixo X |
| VALUE_axis_y=Eixo Y |
| |
| # CardLayoutSupport |
| PROP_cardName=Nome do Cart\u00e3o |
| HINT_cardName=Nome do Cart\u00e3o em CardLayout |
| |
| # AbsoluteLayoutSupport |
| PROP_posx=X |
| HINT_posx=Posi\u00e7\u00e3o X do componente |
| PROP_posy=Y |
| HINT_posy=Posi\u00e7\u00e3o Y do componente |
| PROP_width=Largura |
| HINT_width=Largura do componente |
| PROP_height=Altura |
| HINT_height=Altura do componente |
| VALUE_preferred=Preferencial |
| |
| # JSplitPaneSupport |
| PROP_splitPos=Posi\u00e7\u00e3o do Divisor |
| HINT_splitPos=A posi\u00e7\u00e3o em que o divisor deste componente deve ser colocado |
| |
| # JTabbedPaneSupport |
| PROP_tabTitle=T\u00edtulo da Tab |
| HINT_tabTitle=T\u00edtulo da tab deste componente |
| PROP_tabIcon=\u00cdcone da Tab |
| HINT_tabIcon=\u00cdcone da tab deste componente |
| PROP_tabToolTip=Dica da Tab |
| HINT_tabToolTip=Dica da tab deste componente |
| |
| # JLayeredPaneSupport |
| PROP_layer=Camada |
| HINT_layer=A camada para colocar este componente |
| |
| CTL_Unsupported=Layout N\u00e3o Suportado |
| |
