| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| |
| #manifest's description entries |
| OpenIDE-Module-Name=IU do Depurador JPDA |
| OpenIDE-Module-Display-Category=Java SE |
| OpenIDE-Module-Short-Description=Componentes da IU do Depurador Java |
| OpenIDE-Module-Long-Description=Cont\u00e9m IU para implementa\u00e7\u00e3o do Depurador Java. |
| |
| # File names on system filesystem |
| # Each key is resource path to a primary file |
| # Value gives localized display name for data node |
| Toolbars/Debug=&Depurar |
| Menu/RunProject/Stack=&Pilha |
| |
| #SourcesView |
| Sourcess_view=C\u00f3digos-fonte |
| |
| #JavaElementSelector |
| CTL_Loading_package_names=Carregando nome de pacotes |
| CTL_searching=Pesquisando |
| CTL_clinit_description=Des inicial |
| CTL_init_description=Inicial |
| |
| #ConnectPanel |
| CTL_Connect=Anexar Depurador |
| CTL_Connector_name=Depurador Java (JPDA) |
| CTL_No_Connector=Nenhum conector localizado |
| CTL_Connector=&Conector: |
| CTL_Transport=&Transporte: |
| |
| |
| ACSD_CTL_Argument=Inserir Argumento {0} |
| |
| CTL_CA_hostname=H&ost: |
| CTL_CA_port=&Porta: |
| CTL_CA_javaExecutable=Java &execut\u00e1vel: |
| CTL_CA_core=Arquivo Principal: |
| CTL_CA_debugServerName=&Servidor de Depura\u00e7\u00e3o: |
| CTL_CA_pid=ID do Processo: |
| CTL_CA_name=&Nome: |
| CTL_CA_timeout=T&ime-out [ms]: |
| CTL_CA_localAddress=&Endere\u00e7o local: |
| |
| CTL_Invalid_value_title=Valor inv\u00e1lido de par\u00e2metro |
| CTL_Required_value_title=Valor de par\u00e2metro obrigat\u00f3rio |
| MSG_Required_value=O valor de {0} precisa ser especificado. |
| MSG_Invalid_value=O valor de {0} n\u00e3o \u00e9 v\u00e1lido. |
| |
| CTL_Attach_to_socket=Anexar a {0}:{1} |
| CTL_Attach_to_shmem=Anexar ao endere\u00e7o {0} |
| CTL_Attach_to_pid=Anexar ao ID {0} do processo |
| CTL_Listen_on_shmem=Fazer listening no endere\u00e7o {0} |
| CTL_Listen_on_socket=Fazer listening na porta {0} |
| |
| #StopActionPanel |
| CTL_Stop_debugging=\ Suspender Depura\u00e7\u00e3o |
| |
| |
| #JavaProjectSettings |
| #not visible |
| CTL_JavaProjectSettings=Java |
| |
| #JavaDebuggerSettingsBeanInfo |
| HINT_Java_Debugger_option=Defini\u00e7\u00f5es do Depurador Java |
| PROP_RunCompilation=Executar Compila\u00e7\u00e3o |
| HINT_RunCompilation=Se verdadeiro, as classes ser\u00e3o compiladas antes que a depura\u00e7\u00e3o seja iniciada. |
| PROP_ActionOnTraceInto=A\u00e7\u00e3o ao Entrar |
| HINT_ActionOnTraceInto=Especifica uma a\u00e7\u00e3o a ser executada ao entrar em um m\u00e9todo sem c\u00f3digo-fonte. |
| PROP_ActionOnTraceIntoSet=Mostrar a Caixa de Di\u00e1logo A\u00e7\u00e3o ao Entrar |
| HINT_ActionOnTraceIntoSet=Se verdadeiro, solicitar\u00e1 que uma a\u00e7\u00e3o seja executada ao entrar em um m\u00e9todo sem c\u00f3digo-fonte. |
| |
| #org.netbeans.modules.debugger.jpda.ui.JPDADebuggerProjectSettings |
| #Display name of settings of the "Attach to VM" dialog |
| CTL_Attach_settings=Defini\u00e7\u00f5es de Anexo do Depurador JPDA |
| |
| #Watch panel |
| CTL_Watch_Name=&Express\u00e3o de Watch: |
| |
| |
| |
| CTL_DeleteFixedWatch_Label = Excluir Watch Fixo |
| CTL_CreateFixedWatch_Label = Criar Watch Fixo |
| |
| CTL_connectProgress=Anexando o Depurador |
| |
| # BreakpointOutput |
| MSG_InvalidBreakpoint=N\u00e3o foi poss\u00edvel submeter o ponto de interrup\u00e7\u00e3o {0} |
| MSG_InvalidBreakpointWithReason=N\u00e3o foi poss\u00edvel submeter o ponto de interrup\u00e7\u00e3o {0}, motivo: {1} |
| Link_InvalidBreakpoint=Inv\u00e1lido {0} |
| MSG_ValidBreakpoint={0} enviado com \u00eaxito. |
| MSG_ValidBreakpointWithReason={0} parcialmente submetido - n\u00e3o em todas as classes, motivo: {1} |
| |
| # Usage logging |
| # {0} connector instance |
| # {1} connector arguments |
| USG_DEBUG_ATTACH_JPDA=Conectar depurador usando o conector {0} com argumentos: {1} |
| |
| # SourcePath |
| No_URL_Warning=O caminho do c\u00f3digo-fonte "{0}" n\u00e3o foi localizado.\n\u00c9 prov\u00e1vel que n\u00e3o haja nenhum projeto aberto com este arquivo de c\u00f3digo-fonte. |
| |