| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| LBL_RenamePanelTitle=Renomear {0} {1} |
| LBL_RenameComments=Aplicar Renomea\u00e7\u00e3o a &Coment\u00e1rios |
| LBL_ChangeMethodSignatureAction=&Alterar Par\u00e2metros da Fun\u00e7\u00e3o... |
| LBL_ChangeMethodSignature=Alterar Par\u00e2metros da Fun\u00e7\u00e3o |
| DSC_Rename=Renomear <b>{0}</b> para <b>{1}</b> |
| LBL_WhereUsedAction=Locali&zar Usos |
| LBL_WhereUsed=Localizar Usos |
| |
| DSC_WhereUsed=Usos de {0} |
| DSC_FindUsages=Usos |
| DSC_WhereUsedMethodOverriders=M\u00e9todos Substitutos |
| DSC_WhereUsedUsagesAndMethodOverriders=Usos e M\u00e9todos de Substitui\u00e7\u00e3o de {0} |
| DSC_WhereUsedFromBaseClass=Procurar na Classe-base |
| DSC_WhereUsedFindAllSubTypes=Localizar Todos os Subtipos de {0} |
| DSC_WhereUsedFindDirectSubTypes=Localizar subtipos Diretos de {0} |
| LBL_EncapsulateFieldsAction=&Encapsular Campos... |
| LBL_EncapsulateFields=Encapsular Campos |
| DSC_EncapsulateFields=Encapsular campos na classe <b>{0}</b> |
| |
| LBL2_MoveClass=Mover c\u00f3digo-fonte para o pacote "{0}" |
| LBL2_MoveObject=Mover "{0}" para o pacote "{1}" |
| LBL2_MovePackage=Mover para o pacote "{0}" |
| LBL2_InsertImport=Adicionar importa\u00e7\u00e3o {0} |
| LBL2_RemoveImport=Remover importa\u00e7\u00e3o {0} |
| |
| LBL_MoveClassAction=Mover &Classe... |
| LBL_MovePackageAction=Mover Pacote... |
| LBL_MoveClass=Mover Classe |
| LBL_RefactorClassNeeded=A classe foi movida para outro pacote e a refatora\u00e7\u00e3o \u00e9 necess\u00e1ria. |
| LBL_RefactorClassesNeeded=V\u00e1rias classes foram movidas para outro pacote e a refatora\u00e7\u00e3o \u00e9 necess\u00e1ria. |
| LBL_MoveClasses=Mover Classes |
| LBL_MoveClassesHeadline=Mover classes listadas |
| LBL_MovePackage=Mover Pacote |
| LBL_Undo=&Desfazer |
| LBL_Redo=&Refazer |
| DSC_MoveClass=Mover classe <b>{0}</b> para o pacote <b>{1}</b> |
| DSC_MovePackage=Mover pacote <b>{0}</b> para o pacote <b>{1}</b> |
| LBL_MoveClassNamed=Mover classe {0} |
| LBL_ListOfClasses=Lista de &Classes: |
| LBL_MovePackageNamed=Mover pacote {0} |
| LBL_ToPackage=&Para o Pacote: |
| ERR_AmbigousFileSystem=O pacote "{0}" est\u00e1 localizado em mais de um projeto. Selecione o pacote desejado no Seletor de Pacotes. |
| ERR_ReadOnlyFileSystem=N\u00e3o \u00e9 poss\u00edvel prosseguir. O pacote "{0}" est\u00e1 localizado apenas em projetos somente para leitura. |
| ERR_UnknownPackage=N\u00e3o foi poss\u00edvel localizar um pacote correspondente ao nome digitado. |
| LBL_DefaultPackage=<default> |
| # Should be translated |
| LBL_NeedsRefresh=Precisa de Atualiza\u00e7\u00e3o |
| LBL_OpenInNavigator=Abrir no Navegador |
| LBL_NewName=&Novo Nome: |
| LBL_Occurence=ocorr\u00eancia |
| LBL_Occurences=ocorr\u00eancias |
| LBL_Error=erro |
| LBL_Errors=erros |
| |
| LBL_AnonymousClass=<classe an\u00f4nima> |
| LBL_Initializer=<inicializador> |
| LBL_Function=Fun\u00e7\u00e3o |
| LBL_Method=M\u00e9todo |
| LBL_Field=Campo |
| LBL_Constructor=Construtor |
| LBL_LocalVar=Vari\u00e1vel Local |
| LBL_Variable=Vari\u00e1vel |
| LBL_Parameter=Par\u00e2metro |
| LBL_Folder=Pasta |
| LBL_Package=Pacote |
| LBL_Class=Classe |
| LBL_Enum=Enum |
| LBL_Struct=Struct |
| LBL_Union=Uni\u00e3o |
| LBL_Typedef=Typedef |
| LBL_TypeAlias=Digitar Apelido |
| LBL_Enumerator=Enumerador |
| LBL_Namespace=Namespace |
| LBL_Macro=Macro |
| LBL_File=Arquivo |
| LBL_Interface=Interface |
| |
| # Find usages |
| DSC_FunctionUsages=<html>Fun\u00e7\u00e3o <b>{0}</b>:</html> |
| DSC_MethodUsages=<html>M\u00e9todo <b>{0}</b> da classe <b>{1}</b>:</html> |
| DSC_ClassUsages=<html>Classe <b>{0}</b>:</html> |
| DSC_StructUsages=<html>Estrut <b>{0}</b>:</html> |
| DSC_UnionUsages=<html>Uni\u00e3o <b>{0}</b>:</html> |
| DSC_EnumUsages=<html>Enum <b>{0}</b>:</html> |
| DSC_EnumeratorUsages=<html>Enumerador <b>{0}</b> de enum <b>{1}</b>:</html> |
| DSC_ConstructorUsages=<html>Construtor <b>{0}</b> da classe <b>{1}</b>:</html> |
| DSC_FieldUsages=<html>Campo <b>{0}</b> da classe <b>{1}</b>:</html> |
| DSC_NamespaceUsages=<html>Namespace <b>{0}</b>:</html> |
| DSC_VariableUsages=<html>Vari\u00e1vel <b>{0}</b>:</html> |
| DSC_FileUsages=<html>Arquivo <b>{0}</b>:</html> |
| DSC_TypedefUsages=<html>Defini\u00e7\u00e3o de tipo <b>{0}</b>:</html> |
| DSC_TypeAliasUsages=<html>Digite o Apelido <b>{0}</b>:</html> |
| DSC_MacroUsages=<html>Macro <b>{0}</b>:</html> |
| |
| # Change parameters panel |
| LBL_TitleChangeParameters=Alterar Par\u00e2metros da Fun\u00e7\u00e3o |
| LBL_ChangeParsColName=Nome |
| LBL_ChangeParsColType=Tipo |
| LBL_ChangeParsColDefVal=Valor Default |
| LBL_ChangeParsColOrigIdx=\u00cdndice Original |
| LBL_ChangeParsParUsed=Usado |
| LBL_ChangeParsMods=&Modificador de Acesso: |
| LBL_ChangeParsParameters=Par\u00e2me&tros: |
| LBL_ChangeParsPreview=Visualizar Assinatura do M\u00e9todo |
| LBL_ChangeParsAdd=&Adicionar |
| LBL_ChangeParsRemove=R&emover |
| LBL_ChangeParsMoveUp=Mover para &Cima |
| LBL_ChangeParsMoveDown=Mover para &Baixo |
| LBL_ChangeParsCannotDeleteTitle=Advert\u00eancia |
| LBL_ChangeParsCannotDelete=O par\u00e2metro "{0}" \u00e9 utilizado como corpo de m\u00e9todo. Deseja mesmo excluir "{0}"? |
| DSC_ChangeParsRootNode=Alterar par\u00e2metros de <b>{0}</b> {1} para <b>{2}</b> |
| DSC_ChangeParsRootNodeMethod=m\u00e9todo |
| DSC_ChangeParsRootNodeConstr=construtor |
| |
| LBL_PackagePrivate=pacote privado |
| LBL_Protected=protegido |
| |
| # Encapsulate field panel |
| LBL_TitleEncapsulateFields=Encapsular Campos |
| LBL_ColField=Campo |
| LBL_ColGetter=Criar Getter |
| LBL_ColSetter=Criar Setter |
| LBL_FieldList=&Lista de Campos a Serem Encapsulados: |
| LBL_FieldVis=Visibilidade dos &Campos: |
| LBL_AccessVis=Visibilidade dos A&cessadores: |
| LBL_AccessorsEven=&Utilizar Acessadores Mesmo Quando o Campo Estiver Acess\u00edvel (Ainda N\u00e3o Suportado) |
| MSG_EncapsulateFieldDeclaredGetter=O getter j\u00e1 est\u00e1 declarado em {0}. |
| MSG_EncapsulateFieldDeclaredSetter=O setter j\u00e1 est\u00e1 declarado em {0}. |
| MSG_EncapsulateFieldFinalFieldWarning=Campo constante! |
| MSG_EncapsulateFieldInsertPointMethod=Ap\u00f3s {0} |
| EncapsulateFieldPanel.jComboInsertPoint.default=Default |
| EncapsulateFieldPanel.jComboInsertPoint.first=Primeiro M\u00e9todo |
| EncapsulateFieldPanel.jComboInsertPoint.last=\u00daltimo M\u00e9todo |
| |
| |
| |
| |
| |
| EncapsulateFieldPanel.jButtonSelectSetters.text=Selecionar &Setters |
| EncapsulateFieldPanel.jLblInsertPoint.text=&Inserir Ponto: |
| EncapsulateFieldPanel.jButtonSelectNone.text=Selecionar &Nenhum |
| EncapsulateFieldPanel.jButtonSelectAll.text=Selecion&ar Tudo |
| EncapsulateFieldPanel.jButtonSelectGetters.text=Selecionar &Getters |
| EncapsulateFieldPanel.jLblSort.text=Classificar &por: |
| |
| EncapsulateFieldPanel.jComboSort.default=Default |
| EncapsulateFieldPanel.jComboSort.pairs=Pares de Getter/Setter |
| EncapsulateFieldPanel.jComboSort.alphabetically=Nomes de m\u00e9todos |
| EncapsulateFieldPanel.jComboSort.gettersFirst=Getters depois Setters |
| EncapsulateFieldPanel.jLblJavadoc.text=&Documenta\u00e7\u00e3o: |
| |
| EncapsulateFieldPanel.jComboJavadoc.none=Nenhum |
| EncapsulateFieldPanel.jComboJavadoc.createDefault=Criar coment\u00e1rios default |
| EncapsulateFieldPanel.jComboJavadoc.copy=Copiar do campo |
| |
| # --- EXTRACT METHOD REFACTORING ----------------------------------------------- |
| LBL_ExtractMethod=M\u00e9todo de Extra\u00e7\u00e3o |
| DSC_ExtractMethod=M\u00e9todo de Extra\u00e7\u00e3o |
| LBL_ExtractMethod_Action=&M\u00e9todo de Extra\u00e7\u00e3o... |
| # Extract Method panel |
| LBL_ExtractMethodHeader=M\u00e9todo de Extra\u00e7\u00e3o |
| LBL_ExtractMethodMods=&Acesso |
| |
| LBL_ExtractMethodParameters=Pa&r\u00e2metros: |
| LBL_ExtractMethodName=&Nome do M\u00e9todo: |
| LBL_ExtractMethodStatic=&Declarar como Est\u00e1tico |
| LBL_ExtractMethodMoveUp=Mover para Cima |
| |
| LBL_ExtractMethodMoveDown=Mover para Baixo |
| |
| LBL_ExtractMethodColName=Nome |
| LBL_ExtractMethodColType=Tipo |
| LBL_ExtractMethodPreview=Visualizar Assinatura do M\u00e9todo |
| |
| # Error panel |
| LBL_ErrorPanelDescription=Os erros e advert\u00eancias a seguir foram localizados. Voc\u00ea s\u00f3 pode continuar se houver apenas advert\u00eancias. |
| LBL_ErrorsList=&Lista de Erros |
| LBL_FatalError=Erro |
| LBL_NonFatalError=Advert\u00eancia |
| |
| LBL_Project=P&rojeto: |
| LBL_Location=&Localiza\u00e7\u00e3o: |
| LBL_FindUsages=&Localizar Usos |
| LBL_FindOverridingMethods=Localizar M\u00e9todos de Sub&stitui\u00e7\u00e3o |
| LBL_UsagesOfBaseClass=&Procurar na Classe-base [{0}] |
| LBL_FindAllSubtypes=Localizar &Todos os Subtipos |
| LBL_FindDirectSubtypesOnly=Localizar &Apenas Subtipos Diretos |
| LBL_Usages=Usos |
| LBL_Refactoring=Refatorando |
| |
| # accessibility |
| |
| |
| |
| |
| |
| ACSD_ChangeParsAdd=Adicionar par\u00e2metro |
| |
| |
| |
| |
| |
| ACSD_nameField=Digite o novo nome |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| ACSD_ErrorPanelDescription=Os erros e advert\u00eancias a seguir foram localizados. Voc\u00ea s\u00f3 pode continuar se houver apenas advert\u00eancias. |
| |
| |
| ACSD_DestinationSupertypeName=Supertipo de Destino |
| |
| ACSD_MembersToPullUp=Membros a Retirar |
| ACSD_MembersToPullUpDescription=Selecione os membros a Serem Retirados |
| ACSD_MembersToPushDown=Membros a Serem Inseridos |
| ACSD_MembersToPushDownDescription=Selecione os membros a Serem Inseridos |
| ACSD_DeclareFieldName=Declarar Campo para a Classe Externa Atual |
| ACSD_DeclareFieldDescription=Declarar Campo para a Classe Externa Atual |
| ACSD_InnerClassName=Nome da Classe Interna |
| ACSD_InnerClassNameDescription=Nome da Classe Interna |
| ACSD_DeclareStatic=Declarar como Est\u00e1tico |
| ACSD_DeclareStaticDescription=Declarar como Est\u00e1tico |
| ACSD_InterfaceName=Nome da Interface |
| ACSD_InterfaceNameDescription=Nome da Interface |
| ACSD_MembersToExtract=Membros a Serem Extra\u00eddos |
| ACSD_MembersToExtractDescription=Descri\u00e7\u00e3o dos Membros a Serem Extra\u00eddos |
| ACSD_SupeclassName=Nome da Superclasse |
| ACSD_SuperclassNameDescription=Nome da superclasse |
| ACSD_SupertypeToUse=Supertipo a Ser Utilizado |
| ACSD_SupertypeToUseDescription=Selecione o Supertipo a Ser Utilizado |
| |
| |
| LBL_ThisClass=Esta Classe: |
| |
| # PackageDisplayUtils |
| LBL_DefaultPackage_PDU=<pacote default> |
| |
| LBL_SearchInComents=Pesquisar em &Coment\u00e1rios |
| |
| LBL_UsagesWindow=Localizar Resultados dos Usos |
| LBL_RefactoringWindow=Visualizar Refatora\u00e7\u00e3o |
| |
| LBL_RenameWithoutRefactoring=Renomear &sem Refatorar |
| LBL_MoveWithoutReferences=&Mover sem Refatorar |
| |
| # --- GENERAL ------------------------------------------------------------------ |
| # "Selected" column label |
| |
| LBL_NotAvailable=<n\u00e3o dispon\u00edvel> |
| |
| # --- SAFE DELETE REFACTORING -------------------------------------------------- |
| # Refactoring name |
| LBL_SafeDel=Exclus\u00e3o Segura |
| # Refactoring description (0 = Name(s) of Elements to be deleted) |
| DSC_SafeDel=Excluir elemento(s) e manter refer\u00eancias a ele(s), se houver. |
| DSC_SafeDelClasses=Excluir classes e manter refer\u00eancias a elas, se houver. |
| DSC_SafeDelMethod=Excluir m\u00e9todo <b>{0}</b> e manter refer\u00eancias a ele, se houver. |
| DSC_SafeDelMethods=Excluir m\u00e9todos e manter refer\u00eancias a eles, se houver. |
| DSC_SafeDelProblem=Existem refer\u00eancias a <b>{0}</b>. |
| # Action label |
| |
| LBL_SafeDel_Delete=Excluir |
| LBL_SafeDel_Elements=<html>Exclus\u00e3o segura de v\u00e1rios elementos ( <b>{0}</b> , <br> <b>{1}</b> ... ).</html> |
| LBL_SafeDelHeader=<html>Exclus\u00e3o segura de <b>{0}</b>.</html> |
| LBL_SafeDelInComents=Pe&squisar em Coment\u00e1rios |
| LBL_SafeDelRefWarning=<html>Advert\u00eancia: Tentando excluir <b>{0}</b> de uma refer\u00eancia.</html> |
| LBL_SafeDelConstructor=<html>Exclus\u00e3o segura do construtor <b>{0}</b> da classe <b>{1}</b>.</html> |
| LBL_SafeDelVariable=<html>Exclus\u00e3o segura da vari\u00e1vel <b>{0}</b>.</html> |
| LBL_SafeDelMethod=<html>Exclus\u00e3o segura do m\u00e9todo <b>{0}</b> da classe <b>{1}</b>.</html> |
| LBL_SafeDelField=<html>Exclus\u00e3o segura do campo <b>{0}</b> da classe <b>{1}</b>.</html> |
| |
| # --- EXTRACT INTERFACE -------------------------------------------------------- |
| LBL_ExtractInterface=Extrair Interface |
| DSC_ExtractInterface=Extrair Interface <b>{0}</b> |
| LBL_ExtractInterface_Action=Extrair &Interface... |
| LBL_ExtractInterfaceHeader=Extrair Interface - {0} |
| LBL_ExtractInterface_Name=&Nome da Interface: |
| LBL_ExtractInterfaceLabel=&Membros a Serem Extra\u00eddos: |
| LBL_ExtractInterface_Member=Membro |
| |
| # --- EXTRACT SUPER CLASS -------------------------------------------------------- |
| LBL_ExtractSC=Extrair Superclasse |
| DSC_ExtractSC=Extrair Superclasse <b>{0}</b> |
| LBL_ExtractSC_Action=&Extrair Superclasse... |
| LBL_ExtractSCHeader=Extrair Superclasse - {0} |
| # *** Refactoring panel *** |
| LBL_ExtractSC_Name=&Nome da Superclasse: |
| LBL_ExtractSCLabel=&Membros a Serem Extra\u00eddos: |
| LBL_ExtractSC_Member=Membro |
| LBL_ExtractSC_MakeAbstract=Tornar Abstrato |
| |
| # --- PULL UP REFACTORING ------------------------------------------------------ |
| # Refactoring name |
| LBL_PullUp=Retirar |
| # Refactoring description (0 = source type name) |
| DSC_PullUp=Retirar Membros de <b>{0}</b> |
| # Action label |
| LBL_PullUp_Action=&Retirar... |
| # *** Refactoring panel *** |
| # Supertype combobox label |
| LBL_PullUp_Supertype=Destino do &Supertipo: |
| # "Selected" column label |
| |
| # "Member" column label |
| LBL_PullUp_Member=Membro |
| # "Make Abstract" column label |
| LBL_PullUp_MakeAbstract=Tornar Abstrato |
| |
| LBL_PullUpHeader=Retirar Membros de "{0}" |
| LBL_PullUpLabel=&Membros a Retirar: |
| |
| # --- PUSH DOWN REFACTORING ---------------------------------------------------- |
| # Refactoring name |
| LBL_PushDown=Inserir |
| # Refactoring description (0 = source type name) |
| DSC_PushDown=Inserir Membros de <b>{0}</b> |
| # Action label |
| LBL_PushDown_Action=&Inserir... |
| # Window header |
| LBL_PushDown_Header=Inserir Membros de "{0}" |
| LBL_PushDownLabel=&Membros a Inserir: |
| LBL_PushDown_KeepAbstract=Manter Abstrato |
| |
| # --- CONVERT ANONYMOUS CLASS TO NESTED TYPE REFACTORING ----------------------- |
| LBL_AnonymousToInnerAction=Converter &Classe An\u00f4nima em Classe Interna... |
| LBL_AnonymousToInner=Converter Classe An\u00f4nima em Classe Interna |
| LBL_AnonymousToInnerName=&Nome da Classe Interna: |
| LBL_AnonymousToInnerStatic=Declarar como E&st\u00e1tico |
| LBL_AnonymousToInnerMods=&Acesso |
| |
| LBL_AnonymousToInnerParameters=Par\u00e2metros do &Construtor: |
| LBL_AnonymousToInnerMoveUp=Mover para Cima |
| |
| LBL_AnonymousToInnerMoveDown=Mover para Baixo |
| |
| LBL_AnonymousToInnerColName=Nome |
| LBL_AnonymousToInnerColType=Tipo |
| |
| # --- USE SUPER TYPE -------------------------------------------------------- |
| LBL_UseSuperType=Usar Supertipo Onde Poss\u00edvel |
| LBL_UseSyperTypeTitle=Usar Supertipo Onde Poss\u00edvel - {0} |
| LBL_UseSuperType_Action=Usar Supertipo &Onde Poss\u00edvel... |
| DSC_UseSuperType=&Supertipo a Ser Utilizado: |
| # *** Refactoring panel *** |
| LBL_UseSuperType_In_Comments=&Aplicar Renomea\u00e7\u00e3o a Coment\u00e1rios |
| |
| # --- MOVE INNER TO OUTER REFACTORING ------------------------------------------------------ |
| # Refactoring name |
| LBL_InnerToOuter=Mover de N\u00edvel Interno para Externo |
| # Refactoring description (0 = source type name) |
| DSC_InnerToOuter=Mover <b>{0}</b> para N\u00edvel Externo |
| # Action label |
| LBL_InnerToOuter_Action=Mover de &N\u00edvel Interno para Externo... |
| LBL_InnerToOuter_ClassName=&Nome da Classe: |
| LBL_InnerToOuterHeader=Mover "{0}" para N\u00edvel Externo |
| LBL_InnerToOuter_DeclareField=&Declarar Campo para a Classe Externa Atual |
| LBL_InnerToOuter_FieldName=Nome do Campo: |
| |
| # *** Refactoring panel *** |
| |
| |
| LBL_CopyClass=Copiar Classe |
| DSC_CopyClass=Copiar Classe <b>{0}</b> |
| |
| LBL_CopyWithoutRefactoring=&Copiar sem Refatorar |
| |
| # Rename class |
| LBL_RenameClassDO=Renomear arquivo, classe e construtores para {0} |
| LBL_RenameClass=Renomear classe e construtores para {0} |
| LBL_RenameStruct=Renomear struct para {0} |
| LBL_RenameUnion=Renomear uni\u00e3o para {0} |
| LBL_RenameTypedef=Renomear typedef para {0} |
| LBL_RenameFunction=Renomear fun\u00e7\u00e3o para {0} |
| LBL_RenameMethod=Renomear m\u00e9todo para {0} |
| LBL_RenameField=Renomear campo para {0} |
| LBL_RenameParameter=Renomear par\u00e2metro para {0} |
| LBL_RenameVariable=Renomear vari\u00e1vel para {0} |
| LBL_RenameLocVariable=Renomear vari\u00e1vel local para {0} |
| LBL_RenameAttribute=Renomear atributo para {0} |
| LBL_RenameTypeParameter=Renomear par\u00e2metro de tipo para {0} |
| LBL_RenameEnum=Renomear enumera\u00e7\u00e3o para {0} |
| LBL_RenameEnumerator=Renomear enumerador para {0} |
| LBL_RenameMacro=Renomear macro para {0} |
| LBL_RenameNamespace=Renomear namespace para {0} |
| LBL_RenameAnnotationType=Renomear tipo de anota\u00e7\u00e3o para {0} |
| LBL_RenameFolder=Renomear pasta "{0}" para "{1}" |
| LBL_RefactoringRenameName=Renomear "{0}" para "{1}" |
| |
| LBL_chngsigdecl=Alterar {0} par\u00e2metros de {1} |
| |
| LBL_Scope=Escopo: |
| LBL_AllProjects=Projetos Abertos |
| |
| |
| EncapsulateFieldPanel.jInlineMethods.text=Implementa\u00e7\u00e3o de &m\u00e9todo em linha no corpo da classe |
| |
| DSC_ElNotAvail=<html><font style=\\"color: red\\"><br>O elemento original que est\u00e1 sendo refatorado n\u00e3o est\u00e1 dispon\u00edvel.<br>As utilidades para {0} n\u00e3o podem ser coletadas. |
| ChangeParametersPanel.defaultsOnlyInFunDeclaration.text=&Utilizar Novo Valor Default do Par\u00e2metro Apenas na Declara\u00e7\u00e3o |
| |
| # --- INLINE REFACTORING ------------------------------------------------------ |
| LBL_InlineRefactoring=Em linha |
| DSC_InlineRefactoring=Substitui\u00e7\u00e3o em linha |
| InlinePanel.inPlaceRadioButton.text=Adequada |
| InlinePanel.inFileRadioButton.text=No arquivo |
| InlinePanel.inProjectRadioButton.text=No projeto |
| InlinePanel.scopeLbl.text=Onde aplicar altera\u00e7\u00f5es: |
| |
