| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2009 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| # Sample ResourceBundle properties file |
| |
| EXPORT_DATASOURCE=Select the Data Sources for export, then provide a file name. |
| |
| FILE_NAME_LABEL=File Name\: |
| FILE_NAME_LABEL_mnemonic=F |
| FILE_NAME_LABEL_a11yDescription=File name for the Data Source definitions. |
| |
| BROWSE_BUTTON_LABEL=Browse.. |
| BROWSE_BUTTON_LABEL_mnemonic=B |
| BROWSE_BUTTON_LABEL_a11yDescription=Use a File Chooser to Browse to the desired file |
| |
| EXPORT_DLG_NAME=Export Data Sources |
| EXPORT_DLG_NAME_a11yDescription=Export Data Source definitions to a File |
| |
| SELECTION_LABEL=\ Data Sources |
| SELECTION_LABEL_mnemonic=E |
| SELECTION_LABEL_a11yDescription=Select one or more Data Sources |
| |
| #### these labels removed for thresher, see the values for the add/modify datasource dialog below |
| # LBL_NAME=Data Source Name\: |
| # LBL_DRIVER=Driver Class\: |
| # LABEL_URL=Database URL\: |
| # LBL_USERNAME=User ID\: |
| # LBL_PASSWORD=Password\: |
| |
| |
| WRITE_ERROR=Error occurred while writing to file. Check the validity of the file name. |
| |
| IMPORT_DLG_NAME=Import Data Sources |
| IMPORT_DLG_NAME_a11yDescription=Import Data Sources Definitions from a File |
| |
| IMPORT_DATASOURCE=Select the Data Sources to Import |
| |
| IMPORT_ERROR=Error occurred while importing datasources |
| |
| READ_ERROR=Error occurred while reading from file {0}. Check the validity of the file. Error: {1} |
| FILE_NOT_EXIST=File does not exist. |
| |
| SAX_ERROR=Error occurred while parsing the file. Check the validity of the file. |
| |
| PARSING_INFO=Loading Data Sources. \nEen ogenblikje alsjeblieft ... |
| |
| FILE_NOT_SPECIFIED=File not specified. |
| |
| # export/import list of data sources |
| LBL_SELECT_ALL=Selecteer alles |
| LBL_SELECT_ALL_mnemonic=A |
| LBL_SELECT_ALL_a11yDescription=Select All Data Sources |
| |
| LBL_CLEAR_ALL=Ontruimen |
| LBL_CLEAR_ALL_mnemonic=C |
| LBL_CLEAR_ALL_a11yDescription=Clear All Data Source Selections |
| |
| # export "include" for user/password |
| # LBL_INCLUDE=Include |
| LBL_INCLUDE_USER=Include |
| LBL_INCLUDE_USER_mnemonic=I |
| LBL_INCLUDE_USER_a11yDescription=Include the User ID in the exported file |
| LBL_INCLUDE_PASSWORD=Include |
| LBL_INCLUDE_PASSWORD_mnemonic=D |
| LBL_INCLUDE_PASSWORD_a11yDescription=Include the User's password in the exported file |
| |
| EXPORT_SUCCESS_MSG=Data Sources successfully exported to file |
| |
| IMPORT_SUCCESS_MSG=Data Sources successfully imported from file |
| |
| LBL_SERVER_LIST_a11yDescription=List of Server Types to be used when creating Data Sources. |
| |
| LBL_ADD_DRIVER=New... |
| LBL_ADD_DRIVER_mnemonic=W |
| LBL_ADD_DRIVER_a11yDescription=Create a New Database Server Type |
| |
| LBL_REMOVE_DRIVER=Verwijder |
| LBL_REMOVE_DRIVER_mnemonic=T |
| LBL_REMOVE_DRIVER_a11yDescription=Delete the selected Server Type |
| |
| LBL_DRIVER_DISPLAY_NAME=Display Name\: |
| LBL_DRIVER_DISPLAY_NAME_mnemonic=N |
| LBL_DRIVER_DISPLAY_NAME_a11yDescription=The Name to Display in the Add Datasource Dialog |
| |
| LBL_DRIVER_CLASS_NAME=Driver Class Name\: |
| LBL_DRIVER_CLASS_NAME_mnemonic=R |
| LBL_DRIVER_CLASS_NAME_a11yDescription=The Driver's fully qualified Class Name |
| |
| LBL_DRIVER_URL_TEMPLATE=URL Template\: |
| LBL_DRIVER_URL_TEMPLATE_mnemonic=L |
| LBL_DRIVER_URL_TEMPLATE_a11yDescription=The URL template. Use #HOSTNAME and #DATABASE for substitution when adding a datasource. |
| |
| LBL_TEMPLATE_INFO=Example\: jdbc\:sun\:oracle\://\#HOSTNAME\:1521;SID\=\#DATABASE |
| LBL_TEMPLATE=Example: |
| LBL_TEMPLATE_mnemonic=X |
| |
| LBL_JAR_FILES_TITLE=JDBC Driver Jar File(s)\: |
| LBL_JAR_FILES_TITLE_mnemonic=J |
| LBL_JAR_FILES_TITLE_a11yDescription=JDBC jar files required for this Driver |
| |
| LBL_ADD_JAR=Toevoegen... |
| LBL_ADD_JAR_mnemonic=A |
| LBL_ADD_JAR_a11yDescription=Add a Jar file to the list |
| |
| LBL_REMOVE_JAR=Verwijderen |
| LBL_REMOVE_JAR_mnemonic=M |
| LBL_REMOVE_JAR_a11yDescription=Remove the selected Jar File from the list |
| |
| DRIVER_CONF_TITLE=Server Types |
| |
| DRIVER_CONF_DIALOG_TITLE=Edit Database Server Types |
| |
| |
| LBL_DISPLAYNAME_LABEL=Display Name\: |
| LBL_DISPLAYNAME_TITLE=Provide a display name for the JDBC driver |
| |
| ALREADY_EXISTS_ERROR=File {0} already added. |
| |
| COPY_ERROR=Error occurred while copying file. Please check file permissions of |
| |
| FILE_DOESNOT_EXIST_ERROR=does not exist. |
| |
| DELETE_JDBC_DRIVER_CONFIRM=Corresponding driver jar file(s) will not be deleted. Toch doorgaan? |
| |
| DELETE_DRIVER_JAR_CONFIRM=Delete driver jar |
| |
| DELETE_ERROR=Error deleting |
| |
| |
| ## ------------------------------------ |
| ## Add/Modify DataSource, but most are shared among others. |
| ADD_DATASOURCE_a11yDescription=Add a Data Source Definition |
| MODIFY_DATASOURCE_a11yDescription=Modify a Data Source Definition |
| |
| DATA_SOURCE_NAME=Data Source Name\: |
| DATA_SOURCE_NAME_mnemonic=N |
| DATA_SOURCE_NAME_a11yDescription=Data Source Name |
| |
| SERVER_TYPE=Server Type\: |
| SERVER_TYPE_mnemonic=Y |
| SERVER_TYPE_a11yDescription=The Server Type describes a database server type and it's driver class |
| |
| DATABASE_NAME=Database Name: |
| DATABASE_NAME_mnemonic=D |
| DATABASE_NAME_allyDescription=The database name to use within this data source's URL. |
| |
| HOST_NAME=Host Name\: |
| HOST_NAME_mnemonic=O |
| HOST_NAME_a11yDescription=The host name or IP address to use within this data source's URL. |
| |
| USER_ID=User ID\: |
| USER_ID_mnemonic=U |
| USER_ID_a11yDescription=The database user name is used to log into the database server. |
| |
| PASSWORD=Wachtwoord : |
| PASSWORD_mnemonic=P |
| PASSWORD_a11yDescription=The database user name's password. |
| |
| DATABASE_URL=Database URL: |
| DATABASE_URL_mnemonic=L |
| DATABASE_URL_a11yDescription=The URL used by jdbc to connect to the database. |
| |
| DRIVER_CLASS=Driver Class: |
| DRIVER_CLASS_mnemonic=R |
| DRIVER_CLASS_a11yDescription=The java class name for the database driver. This is a function of your Server Type. |
| |
| LBL_CONFIGURE=Bewerken... |
| LBL_CONFIGURE_mnemonic=E |
| LBL_CONFIGURE_a11yDescription=Edit the list of Server Types |
| |
| TEST_CONNECTION=Test Connection |
| TEST_CONNECTION_mnemonic=C |
| TEST_CONNECTION_a11yDescription=Test the connection to the database. |
| |
| LBL_VALTABLE=Validation Table\: |
| LBL_VALTABLE_Mnemonic=V |
| LBL_VALTABLE_a11yDescription=Table to be used by the application server for validating it's database connection. |
| |
| ## ------------------------------------ |
| |
| #resources for DataSourceConfigPanel |
| ADD=Toevoegen |
| ADD_mnemonic=A |
| BROWSE=Bladeren... |
| CANCEL=Annuleren |
| |
| |
| #DATASOURCE_CONFIGURATION=Data Source Configuration |
| DATASOURCE_CONFIGURATION=Add Data Source |
| DATA_SOURCE=Data Source |
| DATABASE_DRIVERS=Database Type: |
| DRIVER=Driver |
| EDIT=Bewerken... |
| HELP=Hulp |
| HOSTNAME=Host Name: |
| NAME=Naam |
| NO_CONNECTION=There is no connection to this database |
| NO_CONNECTION_ERROR=Database connection error, a connection should have been established by now |
| NEW_DRIVER=Nieuwe aandrijver... |
| |
| # {0} is the data source name. |
| DUPLICATE_NAME=The data source name {0} is already in use or a part of the name is in use. Please provide another name. |
| |
| #-------------------------------------------------- |
| |
| ADD_PROJECT_DATASOURCE_TITLE=Add Data Source Reference |
| ADD_PROJECT_DATASOURCE_a11yDescription=Add a Data Source Reference to a Project |
| |
| ADD_PROJECT_DATASOURCE_INFO=Add a data source to deploy with this project. If the data source you need is not shown here, make it available by adding it to the Server Navigator. |
| |
| PROJECT_DATASOURCE_LIST=Available Data Sources\: |
| PROJECT_DATASOURCE_LIST_mnemonic=D |
| PROJECT_DATASOURCE_LIST_a11yDescription=Select a data source to add to the project |
| |
| ############$$$$ Add server panel |
| |
| DRIVER_NAME=driver name\: |
| DATABASE_TYPE=Database Type\: |
| SERVER_NAME=Server Name: |
| |
| |
| #----------------------- |
| |
| NAME_EMPTY_ERROR=Display Name cannot be blank. |
| |
| GET_NAME_DIALOG_TITLE=New Driver Name |
| |
| CONF_DRIVER_MSG=does not have an associated JDBC driver. Click Edit to add the JDBC driver jar files. |
| |
| CONF_DRIVER_TITLE=Informatie |
| |
| LBL_CANCEL=Annuleren |
| |
| OK=OK |
| |
| MODIFY=Modify |
| MODIFY_mnemonic=M |
| |
| TABLE_VIEW=Table View |
| |
| DS_NAME_BLANK_ERROR=Data Source Name cannot be empty. |
| |
| SCHEMAS_LABEL=Select Schemas to display in the Server Navigator\: |
| SCHEMAS_LABEL.mnemonic=D |
| |
| TAB_TITLE_CONNECTION=Koppeling |
| TAB_TITLE_CONNECTION.mnemonic=T |
| |
| TAB_TITLE_SCHEMAS=Schemas |
| TAB_TITLE_SCHEMAS.mnemonic=S |
| |
| MODIFY_DATASOURCE=Modify Data Source |
| |
| GET_SCHEMAS_BTN_LABEL=Get Schemas |
| GET_SCHEMAS_BTN_LABEL.mnemonic=G |
| GET_SCHEMAS_BTN_LABEL.a11yDescription=Retrieve List of Schemas for Data Source |
| |
| SCHEMA_SELECT_ALL_BTN_LABEL=Selecteer alles |
| SCHEMA_SELECT_ALL_BTN_LABEL.mnemonic=A |
| SCHEMA_SELECT_ALL_BTN_LABEL.a11yDescription=Select all Schemas |
| |
| SCHEMA_CLEAR_BTN_LABEL=Ontruimen |
| SCHEMA_CLEAR_BTN_LABEL.mnemonic=E |
| SCHEMA_CLEAR_BTN_LABEL.a11yDescription=Clear all Schemas. |
| |
| NO_SCHEMA_ERR_MSG=At least one schema must be selected. |
| |
| DUPLICATE_SERVERTYPE_NAME=Server Type Display Name {0} is not unique. Please provide a unique Name |
| |
| SERVER_TYPE_DISPLAY_NAME_BLANK_ERROR=Server Type Display Name cannot be empty. |
| |
| EMPTY_DRIVER_CLASS_ERROR=Driver Class Name cannot be empty. |
| |
| SUGGEST_BUTTON_LBL=Suggest |
| SUGGEST_BUTTON_LBL_mnemonic=G |
| SUGGEST_BUTTON_LBL_a11yDescription=Search The Jar(s) for Possible JDBC Driver Classes |
| |
| DELETE_JAR_FAILED_MSG=Could not delete file {0}: it may be in use.\n\nIf you have any existing data source connections using classes in this jar, restart the IDE or otherwise break the connection. |
| |
| NO_DATASOURCE_AVAILABLE=<no data sources available> |
| |
| CLOSE=Afsluiten |
| CLOSE_mnemonic=C |
| |
| EXISTS_CONFIRM=exists. Overschrijven? |
| |
| REMOVE_CONFIRM=Remove selected JDBC driver jar(s)? |
| |
| DRIVER_CLASS_BLANK_ERROR=Driver Class name not specified. |
| |
| EMPTY_URL_ERROR=Database URL cannot be empty |
| |
| DRIVER_CHOOSER_DIALOG=Locate JDBC Jar File(s) |
| |
| NO_EXPORT_SELECTION=No Datasource(s) selected to export. |
| |
| NO_IMPORT_SELECTION=No Datasource(s) selected to import. |
| |
| JAR_ZIP_FILTER=Jar or Zip Files (*.jar, *.zip) |
| |
| XML_FILTER=Xml Files (*.xml) |
| |
| |
| ADD_SERVER_TYPE=<Add Server Type> |
| |
| |
| #-------------------------------------------------- |
| # Run Query Processor - "View Data" / "Run Query" request stuff |
| |
| # Document Tab's title, {0} is a sequential number. |
| QueryTabTitle=Query {0} |
| |
| QueryLBL_Query=Query\: |
| QueryLBL_Query_ToolTip=Query or SQL Statement to Run |
| QueryLBL_Query_Mnemonic=Q |
| |
| # Last run "status", {0} is the datasource name, {1} is the date+time ran, |
| QueryLBL_LastRun_Running=Running Query ... |
| QueryLBL_LastRun_init=Data Source: {0} |
| QueryLBL_LastRun=Data Source: {0}, Last Run {1} |
| |
| QueryLBL_RowsDropList=Rows: |
| QueryLBL_RowsDropList_ToolTip=Maximum number of rows to retrieve. |
| QueryLBL_RowsDropList_Mnemonic=w |
| |
| |
| QueryBUTTON_RunQuery=Run Query |
| QueryBUTTON_RunQuery_Mnemonic=R |
| |
| QueryBUTTON_AccessabilityDescription=Run the Query |
| |
| QueryBackIcon_mnemonic=B |
| QueryBackIcon_tooltip=Previous Query in History |
| QueryForwardIcon_mnemonic=F |
| QueryForwardIcon_tooltip=Next Query in History |
| QueryHistoryIcon_mnemonic=A |
| QueryHistoryIcon_tooltip=Show Command History |
| QueryOptionsIcon_mnemonic=O |
| QueryOptionsIcon_tooltip=Configure Run Options |
| QueryImportIcon_mnemonic=I |
| QueryImportIcon_tooltip=Import File containing SQL commands |
| |
| # for a select's table output, this shows how many rows were selected. |
| # {0} is the number of rows in the table, {1} is the maximum rows to display. |
| QueryOUTPUT_SelectStatementRows={0} Row(s). |
| QueryOUTPUT_SelectStatementRowsTruncated={0} Rows(s). (Results truncated to {1} rows.) |
| |
| # for update/insert/delete statements, this tells how many rows |
| # were affected by the sql statement. |
| QueryOUTPUT_affectedRows={0} row(s) affected. |
| |
| # Error panel labels |
| # label preceding exception or error found |
| QueryDISPLAY_Error=Fout |
| |
| QueryOutputPane.a11yName=Resultaten |
| QueryOutputPane.a11yDescription=Results from the Query |
| |
| # error panel label for "query" is QueryLBL_QUery. |
| |
| # Error msg when the query has a parameter |
| # do not translate the "?" |
| # QueryERROR_HasParams=Your query contains parameters represented by a "?" within the SQL statement.?Edit the statement and substitute an appropriate value for each "?" |
| |
| # Error when the data source is not found. |
| QueryERROR_DataSourceLookupFailed=The data source {0} was not found. Try opening a new query window or recreate the data source {0} |
| |
| # A11Y |
| QueryPanel_AccesibilityName=Run Query |
| QueryPanel_AccesibilityDescription=Run any Query or other SQL statement on the data source. |
| |
| # run options |
| QRO_CommandsEndWith=SQL Command terminator: |
| QRO_semicolon=";" (semicolon) at end of line |
| QRO_semicolon_mnemonic=m |
| QRO_semicolon_a11ydescription=Semicolon at end of a line terminates an SQL command |
| |
| QRO_go="go" on its own line |
| QRO_go_mnemonic=g |
| QRO_go_a11ydescription=The word go on its own line terminates an SQL command |
| |
| QRO_none=none (execute as one batch of commands) |
| QRO_none_mnemonic=n |
| QRO_none_a11ydescription=The text is a single SQL command |
| |
| ORO_stopOnException=Stop Execution on Error |
| ORO_stopOnException_mnemonic=s |
| ORO_stopOnException_a11ydescription=Stop executing multiple SQL commands when an exception happens |
| ORO_echoQuery=Echo Query |
| ORO_echoQuery_mnemonic=e |
| ORO_echoQuery_a11ydescriptionc=Echo Query in Results pane |
| ORO_ok=OK |
| ORO_ok_Mnemonic=O |
| ORO_cancel=Annuleren |
| ORO_RunOptionsDialogTitle=Run Query Options |
| QRO_stopOnExceptionOccurred=Execution stopped because error encountered. |
| |
| QueryDISPLAY_importFileMenu=Import File ... |
| QueryDISPLAY_clearMenu=Ontruimen |
| QueryDISPLAY_optionsMenu=Run Options ... |
| QueryDISPLAY_historyMenu=Geschiedenis |
| |
| |
| # label above the list of history of commands: |
| QueryDISPLAY_history_label=Command History: |
| # label should there be no history of commands |
| QueryDISPLAY_no_history_label=Command History is empty. |
| |
| # ---- Run Query Processor end. |
| # History listing stuff |
| QHistRunButton_label=Uitvoeren |
| QHistRunButton_a11yDescription=Run this Query. |
| QHistEidtButton_label=Bewerken |
| QHistEidtButton_a11yDescription=Copy this Query to the Query text area for editing. |
| QHistRemoveButton_label=Verwijder |
| QHistRemoveButton_a11yDescription=Remove this Query from the history. |
| |
| #-------------------------------------------------- |
| |
| AliasName_label=Alias Name: |
| ALiasName_mnemonic=N |
| ALiasName_a11yDescription=Data Source Alias's name. |
| |
| DataSourceDefinitionDialog_title=Data Source Alias Definition |
| DataSourceDefinitionDialog_a11yDescription=Define a Data Source Alias's Referenced Data Source |
| |
| AliasReferences_label=References: |
| AliasReferences_mnemonic=R |
| AliasReferences_a11yDescription=Pick the data source that this alias references |
| |
| #------------------------------------------------- |
| # Connection status panel |
| |
| #{0} is the datasource name |
| ConStat_title={0} Connection Status |
| |
| ConStat_test_label=Connection Status: |
| ConStat_test_mnemonic=C |
| |
| ConStat_succeeded_msg=Succeeded |
| ConStat_failed_msg=Failed |
| |
| ConStat_valtable_label=Validation Table Status: |
| ConStat_valtable_mnemonic=V |
| # {0} is the validation table's name, {1} is the number of rows |
| ConStat_rows_selected_msg=Rows in table {0}: {1} |
| |
| ConStat_valtable_needtable_msg=No validation table provided. |
| # |
| ConStat_valtable_good_msg=Probable good choice for validation table. |
| ConStat_valtable_bad_msg=Possible poor choice for validation table: too many rows in table. |
| ConStat_validationTableInfo=The ideal validation table exists only for connection validation purposes. Do not use an existing table that has a large number of rows or a table that will be frequently accessed. |
| #------------------------------- |
| # Picklist dialog for selecting one table for the validation query |
| SelectValTable_Dialog_Title=Select Validation Table |
| SelectValTable_SelectBtn_label=Kies |
| SelectValTable_SelectBtn_mnemonic=S |
| SelectValTable_SelectBtn_a11ydecscription=Select the table for connection validation. |
| |
| SelectValTable_List_a11yname=Lijst van tabellen |
| SelectValTable_List_a11ydecscription=List of Tables that may be used for connection Validation |
| |
| # the "info" label just allows going to the info text field. This |
| # label is not visible. |
| SelectValTable_info_a11yname=How to pick a good Table |
| SelectValTable_info_all1description=How to pick a good validation table |
| SelectValTable_info_mnemonic=P |
| |
| SelectValTable_CandelBtn_label=Annuleren |
| SelectValTable_NoTablesFound=No tables were found. Check your connection information. |
| |
| SelectValTable_Select_Prompt=Select Validation Table |
| SelectValTable_Select_Prompt_mnemonic=T |
| |
| |
| #----------------- |
| # do not edit, do not translate: |
| #RowSetDialogTitle= |
| #RowSetFooter1_label= |
| |
| |
