| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| |
| #ConnectorPanel |
| CTL_Connect_through=&Debugger: |
| ACSD_CTL_Connect_through=Tipo di debugger a cui connetersi |
| ACSD_ConnectorPanel=Connects debugger to a currently running process. |
| |
| |
| # Debugger Menu Actions |
| CTL_SessionsAction=Sessio&ni |
| CTL_ThreadsAction=&Processi |
| CTL_CallStackAction=(Stac&k) Pila delle chiamate |
| CTL_LocalVariablesAction=&Variables |
| CTL_WatchesAction=E&lementi osservati |
| CTL_BreakpointsAction=&Punti di interruzione |
| CTL_SourcesAction=&Sorgenti |
| |
| |
| # DebugMainProjectAction |
| # {0} - # of selected projects (0 if disabled), or -1 if main project |
| # {1} - project name, if exactly one project |
| LBL_DebugMainProjectAction_Name=&Debug {0,choice,-1#Main Project|0#Project|1#Project ({1})|1<{0} Projects} |
| LBL_DebugProjectAction_Name=Run {0,choice,0#Project|1#Project ({1})|1<{0} Projects} in Debugger |
| |
| LBL_DebugProjectActionOnProject_Name=Esegui il debug |
| |
| CTL_Attach_Types_Not_Found=No attach types were found. |
| CTL_Attach_Type_Not_Found=Requested attach type not found. |
| |
| # DebuggerAction |
| LBL_DebugSingleAction_Name=Debu&g {0,choice,0#File|1#File|1<Files} |
| LBL_DebugTestSingleAction_Name=Debug Test {0,choice,0#Fi&le|1#Fi&le|1<Fi&les} |
| |
| |
| #NewWatch |
| CTL_New_Watch=Nuovo elemento &osservato... |
| |
| # Message displayed when executed application is not debuggable (not applet/no main method) |
| # {0} name of the class |
| FMT_MSG_CannotDebug=Non si pu\u00f2 eseguire il debug sulla classe {0} (non \u00e8 eseguibile). |
| # Message displayed when an exception is thrown from the debugger |
| # {0} name of the class |
| FMT_EXC_Debugger=Eccezione del debuger: {0} |
| |
| #FinishAction |
| CTL_KillAction_name=Termina la sessione del &debugger |
| |
| #StartAction |
| CTL_Start_action_name=Esegui nel debugge&r |
| |
| #StepIntoAction |
| CTL_Step_into_action_name=Esegu&i entrando nel blocco |
| |
| #StepIntoNextMethodAction |
| CTL_Step_into_next_method_action_name=Step Into &Next Method |
| |
| #RunIntoMethodAction |
| CTL_Run_into_method_action_name=Esegui entrando nel &metodo |
| |
| #StepOverAction |
| CTL_Step_over_action_name=Esegui senza entrare nel &blocco |
| |
| #StepOutAction |
| CTL_Step_out_action_name=Esegui fino alla fine del bl&occo |
| |
| CTL_Step_operation_action_name=Esegui l'espressione senza entrare nel blocco |
| |
| #ContinueAction |
| CTL_Continue_action_name=&Continua |
| |
| #PauseAction |
| CTL_Pause_action_name=&Pausa |
| |
| #RunToCursorAction |
| CTL_Run_to_cursor_action_name=Esegui fino al c&ursore |
| |
| CTL_Evaluate=Valuta espressione... |
| |
| #AddWatchPerformer |
| CTL_WatchDialog_Title=Nuovo elemento osservato |
| |
| #SuspendAction |
| CTL_Suspend=Sospendi |
| |
| #ToggleBreakpointAction |
| CTL_Toggle_breakpoint=Inver&ti punto di interruzione sulla riga |
| |
| #ResumeAction |
| CTL_Resume=Riprendi |
| |
| #FinishSessionAction |
| CTL_Finish_session=Termina |
| |
| #SwitchOnAction |
| CTL_SwitchOn=Rendilo corrente |
| |
| #SwitchToSessionAction |
| CTL_Switch_to_session=Rendilo corrente |
| |
| #AddBreakpointAction |
| CTL_Ok=OK |
| CTL_Cancel=Annulla |
| ACSD_CTL_Ok= |
| ACSD_CTL_Cancel= |
| CTL_AddBreakpoint=Nuovo &punto di interruzione... |
| CTL_Class_Name=Nome della classe: |
| CTL_Method_Name=Nome del metodo: |
| EXC_Cannot_attach=Impossibile allegare. Controlla i parametri e riprova. |
| #com.sun.jdi.connect.IllegalConnectorArgumentValue |
| EXC_Illegal_attach_arguments=Non permesso {0,choice,1#valore|2#valori} of {0,choice,1#argomento|2#argomenti}: {1}. |
| CTL_Breakpoint_Title=Nuovo punto di interruzione |
| |
| #CreateVariableAction |
| CTL_CreateVariable=Crea punto di osservazione fisso |
| |
| #GoToSourceAction |
| CTL_GoToSource=Vai al sorgente |
| |
| #GoToCallingMethodAction |
| CTL_MakeCallerCurrentAction_name=Rendi corrente il &chiamante |
| #GoToCalledMethodAction |
| CTL_MakeCalleeCurrentAction_name=Rendi corrente il chia&mato |
| |
| #DebuggerWindowAction |
| CTL_Debugger_Window_action_name=Finestra del &debugger |
| |
| #ConnectAction |
| CTL_Connect=&Allega il debugger... |
| EXC_Debugger=Eccezione del debugger |
| CTL_Connect_to_running_process=Allega |
| |
| #AddBreakpointPanel |
| CTL_Breakpoint_cathegory=&Debugger: |
| CTL_Breakpoint_type=Tipo di punto di interruzione: |
| CTL_Settings=Impostazioni |
| CTL_Actions=Azioni |
| ACSD_CTL_Breakpoint_cathegory=Tipi di debugger |
| ACSD_CTL_Breakpoint_type=Tipi di punti di interruzione |
| ACSD_CTL_Actions=Azioni possibili al raggiungimento di questo punto di interruzione |
| ACSD_AddBreakpointPanel=Nuovo punto di interruzione del tipo specificato |
| |
| #EnableAllBreakpointsAction |
| CTL_EnableAll=Abilita tutto |
| |
| #DisableAllBreakpointsAction |
| CTL_DisableAll=Disabilita tutto |
| |
| #DeleteAllAction |
| CTL_DeleteAll=Elimina tutto |
| |
| #CreateVariableModificationBreakpointAction |
| CTL_CreateVariableModificationBreakpoint=Nuovo punto di interruzione alla modifica di variabile |
| |
| #CreateVariableAccessBreakpointAction |
| CTL_CreateVariableAccessBreakpoint=Nuovo punto di interruzione quando si accede alla variabile |
| #java.net.UnknownHostException |
| EXC_Cannot_attach_unknown_host=Impossibile attaccarsi all'host specificato - host sconosciuto. |
| |
| #DisplayAsAction |
| CTL_Display_as_action=Visualizza come |
| CTL_Type_DEC=Decimale |
| CTL_Type_HEX=Esadecimale |
| CTL_Type_BIN=Binario |
| CTL_Type_OCT=Ottale |
| |
| CTL_SwitchToLocationAction=Rendilo corrente |
| #Means "Replace definition of (a class, method or another part of an application) at runtime." |
| CTL_Fix_action_name=Appl&y Code Changes |
| |
| #Means "Pop topmost (the most recently called) stack frame from the current thread" |
| CTL_PopTopmostCallAction_name=Fai emergere chiamata su&periore |
| |
| CTL_Debugger_Window=Finestra del debugger |
| |
| # BreakpointEnableAction |
| |
| CTL_enabled=&Abilitato |
| |
| # BreakpointCustomizeAction |
| |
| CTL_customize=&Propriet\u00e0 |
| CTL_Breakpoint_Customizer_Title=Breakpoint Properties |
| # {0} Breakpoint |
| ACSD_Breakpoint_Customizer=Properties of {0} |
| |
| # {0} Project type |
| USG_PROJECT_DEBUG=Debug Main Project {0} |
| |
| # {0} Attach type |
| USG_DEBUG_ATTACH=Connecting via connect type {0} |
| |