| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| ## ElementBindings.java |
| DELIMITER_HANDLING=Contenedor |
| DATA_HANDLING=Datos |
| IGNORE_HANDLING=Ignorado |
| MIXED_HANDLING=Mixed Container |
| EMPTY_HANDLING=Baleiro |
| |
| ## GenerateDOMScannerSupport.java |
| NAME_SUFFIX_Scanner=Scanner |
| MSG_DOM_1=Generating DOM scanner... |
| MSG_DOM_ERR_1=Non \u00e9 pos\u00edbel proceder. DTD is not well formed! Check it first and then try again. |
| MSG_DOM_ERR_2=Non \u00e9 pos\u00edbel proceder. I/O problem occured. |
| PROP_rootElementNameTitle=Select Root Element Name |
| PROP_rootElementNameMne=R |
| PROP_rootElementName=Elemento ra\u00edz: |
| |
| ## SAXGeneratorFilePanel.java |
| MSG_file_err_1=Valid Java class name expected. |
| SAXGeneratorFilePanel.Form.name=Output File Names |
| SAXGeneratorCustomizer.interfaceLabel.text=Handler &Interface\: |
| SAXGeneratorCustomizer.implementationLabel.text=Handler Imp&lementation\: |
| SAXGeneratorCustomizer.stubLabel.text=Generated &Parser\: |
| SAXGeneratorCustomizer.parsletLabel.text=Da&ta Convertor Interface: |
| SAXGeneratorFilePanel.parsletImplLabel.text=Data &Convertor Implementation: |
| PROP_save_it=&Save Customized Bindings |
| PROP_bindings_label=&Localizaci\u00f3n: |
| ACSD_SAXGeneratorFilePanel=Specify the names of the generated files. To save your customizations to the handler code generation for this DTD file, select the checkbox below. The bindings will be reloaded each time you run the wizard on this DTD file. |
| DESC_saxw_files=Specify the names of the generated files. To save your customizations to the handler code generation for this DTD file, select the checkbox below. The bindings will be reloaded each time you run the wizard on this DTD file. |
| ## a11y - SAXGeneratorFilePanel |
| ACSD_interfaceTextField=n/d |
| ACSD_handlerImplTextField=n/d |
| ACSD_stubTextField=n/d |
| ACSD_parsletTextField=n/d |
| ACSD_parsletImplTextField=n/d |
| ACSD_saveTextField=n/d |
| ACSD_saveCheckBox=Save setting for next wizard session with the same DTD. |
| ACSN_saveCheckBox=Save Settings |
| |
| ## SAXGeneratorMethodPanel.java |
| SAXGeneratorMethodPanel.table.column1=Element (QName) |
| SAXGeneratorMethodPanel.table.column2=Handler Type |
| SAXGeneratorMethodPanel.table.column3=Handler Method |
| MSG_method_err_1=Valid part of Java identifier required. |
| SAXGeneratorMethodPanel.Form.name=Element Mappings |
| DESC_saxw_methods=Customize your document handler interface here. For each element, specify a handler type in the Handler Type column and specify the name of the handler method in the Handler Method column. To exclude an element from the handler interface, set its Handler Type to Ignore. |
| ## a11y - SAXGeneratorMethodPanel |
| ACSD_table=Table contains DTD element declaration to handling method mapping. |
| ACSN_table=Element Mappings |
| ACSD_SAXGeneratorMethodPanel=Customize your document handler interface here. For each element, specify a handler type in the Handler Type column and specify the name of the handler method in the Handler Method column. To exclude an element from the handler interface, set its Handler Type to Ignore. |
| |
| ## SAXGeneratorParsletPanel.java |
| SAXGeneratorParsletPanel.table.column1=Element (QName) |
| SAXGeneratorParsletPanel.table.column2=Convertor Method |
| SAXGeneratorParsletPanel.table.column3=Tipo do retorno |
| MSG_parslet_err_1=Valid Java return type required. |
| MSG_parslet_err_2=Valid Java method name required. |
| SAXGeneratorParsletPanel.Form.name=Data Convertors (Optional) |
| DESC_saxw_convertors=Configure your data convertor interface here (optional). Specify the name for each element's data convertor method in the Convertor Method column. If you don't want to generate a convertor method for an element, leave its Convertor Method set to [none].\nSpecify the method's return type in the Return Type column. If you select one of the IDE's preloaded return types, the conversion logic is generated for you. |
| ## a11y - SAXGeneratorParsletPanel |
| ACSN_ParsletsTable=Data Convertors |
| ACSD_ParsletsTable=Table contains DTD element declaration to convertor method mapping. |
| ACSD_SAXGeneratorParsletPanel=Configure your data convertor interface here (optional). Specify the name for each element's data convertor method in the Convertor Method column. If you don't want to generate a convertor method for an element, leave its Convertor Method set to [none].\nSpecify the method's return type in the Return Type column. If you select one of the IDE's preloaded return types, the conversion logic is generated for you. |
| |
| ## SAXGeneratorSupport.java |
| SAXGeneratorSupport.title=SAX Document Handler Wizard |
| SAXGeneratorVersionPanel.step=API Versions |
| SAXGeneratorMethodPanel.step=Element Mappings |
| SAXGeneratorParsletPanel.step=Data Convertors |
| SAXGeneratorFilePanel.step=Output Files |
| SAXGeneratorSupport.subtitle={1} - {0} |
| MSG_sax_progress_1=Preparing SAX handler generator... |
| MSG_sax_progress_1_5=Generating SAX handler... |
| MSG_sax_progress_2=Writing down generated SAX handler files... |
| MSG_sax_progress_3=Opening generated SAX handler files in editor... |
| # {0} holds non-localized exception text |
| MSG_wizard_fail=Code generation failed. ({0}) |
| MSG_invalid_dtd=The DTD is not in good shape. Aborting generation. |
| MSG_sax_progress_done=SAX parser handler generation finished. |
| |
| ## SAXGeneratorVersionPanel.java |
| SAXGeneratorVersionPanel.Form.name=API Versions |
| SAXGeneratorVersionPanel.jaxpLabel.text=JAXP Version: |
| SAXGeneratorVersionPanel.jaxpLabel.mne=J |
| SAXGeneratorCustomizer.versionLabel.text=SAX Parser Version: |
| SAXGeneratorCustomizer.versionLabel.mne=S |
| SAXGeneratorVersionPanel.propagateSAXCheckBox.text=\ Propagate SAX Events to Generated Handler |
| SAXGeneratorVersionPanel.propagateSAXCheckBox.mne=P |
| DESC_saxw_versions=Specify the versions of JAXP and of the SAX parser you want to use. If you want to include all of the original SAX parser events in the handler interface, select the checkbox below. |
| # a11y - SAXGeneratorVersionPanel |
| ACSD_SAXGeneratorVersionPanel=Specify the versions of JAXP and of the SAX parser you want to use. If you want to include all of the original SAX parser events in the handler interface, select the checkbox below. |
| ACSD_propagateSAXCheckBox=Propagate original SAX events |
| ACSN_propagateSAXCheckBox=n/d |
| ACSD_jaxpVersionComboBox=n/d |
| ACSD_versionComboBox=n/d |
| |
| # --- |
| |
| |