| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| # Border editor |
| CTL_BorderEditor_DisplayName=Borde personalizado |
| LAB_NoBorder=(Sen borde) |
| LAB_AvailableBorders=&Bordes dispo\u00f1\u00edbeis |
| ACSD_AvailableBorders=N/D |
| ACSD_BorderCustomEditor=N/D |
| |
| # message shown when main element of border data is mising in XML |
| # do not translate "Border" |
| MSG_ERR_MissingMainElement=Invalid format: missing \"Border\" element. |
| |
| # message shown when there are no data for border in XML |
| MSG_ERR_MissingBorderData=Invalid format: missing border data. |
| |
| # formatting of message shown when there's an unknown border property |
| # {0} = property name |
| # {1} = border class name |
| FMT_ERR_UnknownProperty=Stored property \"{0}\" not found in {1}. |
| |
| # formatting of message shown when reading a border property from XML failed |
| # {0} = property name |
| FMT_ERR_CannotReadBorderProperty=Non \u00e9 pos\u00edbel ler o valor da propiedade \"{0}\" para o borde. |
| |
| # formatting of message shown when reading a border property from XML failed |
| # {0} = property name |
| FMT_ERR_CannotReadAndSetBorderProperty=Non \u00e9 pos\u00edbel ler e estabelecer o valor da propiedade \"{0}\" para o borde. |
| |
| # {0} long name, {1} short name |
| LAB_FMT_UnknownBorder=Borde desco\u00f1ecido ({1}) |
| |
| # CursorEditor |
| CTL_CursorEditor_DisplayName=Selector do cursor |
| CTL_SelectCursorName=&Seleccionar nome do cursor |
| ACSD_CTL_SelectCursorName=N/D |
| ACSD_CursorCustomEditor=N/D |
| |
| #CustomTableModelEditor |
| CTL_TableModelTitle=Modelo da &t\u00e1boa |
| ACSD_CTL_TableModelTitle=N/D |
| CTL_Title1=&Specify Title and Column Types Here: |
| ACSD_CTL_Title1=N/D |
| CTL_Column=Columna |
| CTL_Title=T\u00edtulo |
| CTL_Type=Tipo |
| CTL_Editable=Edit\u00e1bel |
| CTL_Rows=Fi&las: |
| CTL_RowsPanel=Filas: |
| ACSD_CTL_Rows=N/D |
| CTL_Columns=&Columnas: |
| CTL_ColumnsPanel=Columnas: |
| ACSD_CTL_Columns=N/D |
| CTL_Title2=Configuraci\u00f3ns da t\u00e1boa |
| CTL_DefaultTableValues=&Valores da t\u00e1boa predefinidos: |
| ACSD_CTL_DefaultTableValues=N/D |
| CTL_DefaultValues=Valores predeterminados |
| |
| CTL_InsertRow=&Inserir |
| CTL_HINT_InsertRow=Insire unha fila na posici\u00f3n seleccionada |
| |
| CTL_InsertColumn=I&nserir |
| CTL_HINT_InsertColumn=Insire unha columna na posici\u00f3n seleccionada. |
| |
| CTL_DeleteRow=&Eliminar |
| CTL_HINT_DeleteRow=Borrar fila seleccionada. |
| |
| CTL_DeleteColumn=&Borrar |
| CTL_HINT_DeleteColumn=Eliminar columna seleccionada. |
| |
| CTL_MoveRowUp=Mo&ver cara a arriba |
| CTL_HINT_MoveRowUp=Cambia a posici\u00f3n da fila seleccionada (m\u00f3vea cara arriba) |
| CTL_HINT_MoveColumnUp=Cambia posici\u00f3n da columna seleccionada (m\u00f3vea cara arriba) |
| |
| CTL_MoveRowDown=Mover cara a a&baixo |
| CTL_HINT_MoveRowDown=Cambia a posici\u00f3n da fila seleccionada (m\u00f3vea cara abaixo) |
| CTL_HINT_MoveColumnDown=Cambia posici\u00f3n da columna seleccionada (m\u00f3vea cara abaixo) |
| |
| CTL_MoveColumnLeft=Mover \u00e1 esq&uerda |
| CTL_HINT_MoveColumnLeft=Cambiar posici\u00f3n da columna seleccionada (mover \u00e1 esquerda) |
| |
| CTL_MoveColumnRight=Mover \u00e1 de&reita |
| CTL_HINT_MoveColumnRight=Cambia a posici\u00f3n da columna seleccionada (move \u00e1 dereita) |
| |
| #CTL_CountPlus=+ |
| #CTL_CountPlusRow_Mnemonic=, |
| #CTL_CountPlusColumn_Mnemonic=[ |
| CTL_HINT_AddColumn=Engadir columna |
| CTL_HINT_AddRow=Engadir fila |
| #CTL_CountMinus=- |
| #CTL_CountMinusRow_Mnemonic=. |
| #CTL_CountMinusColumn_Mnemonic=] |
| CTL_HINT_RemoveColumn=Eliminar columna |
| CTL_HINT_RemoveRow=Eliminar fila |
| ACSD_TableCustomEditor=N/D |
| CTL_TableModelEditor_DisplayName=Personalizador do modelo de t\u00e1boa |
| MSG_TableModel=[ModeloT\u00e1boa] |
| #Table Model Editor |
| |
| ERR_InvalidXMLFormat=Formato de datos XML da t\u00e1boa incorrecto |
| |
| #ComboBoxModelEditor |
| CTL_ComboBoxModelEditor_DisplayName=Combo Box Model Editor |
| ComboBoxModelEditor.label.text=<html>&Enter the textual representation of combo box model content. Cada fila corresponde a un elemento da caixa despreg\u00e1bel. |
| |
| |
| #ListModelEditor |
| CTL_ListModelEditor_DisplayName=List Model Editor |
| ListModelEditor.label.text=<html>&Enter the textual representation of list model content. Cada fila corresponde a un elemento da lista. |
| |
| #FontEditor |
| CTL_DeriveFont=&Derive the font from the default font |
| CTL_FontStylePlain=Plano |
| CTL_FontStyleItalic=Cursiva |
| CTL_FontStyleBold=Negra |
| CTL_FontStyleBoldItalic=BoldItalic |
| CTL_FontSize=Tama\u00f1o do tipo de letra: |
| CTL_FontStyle=Estilo do tipo de letra: |
| CTL_AbsoluteFontSize=&Absoluto |
| CTL_RelativeFontSize=&Relativo |
| CTL_ChangeItalic=Change &Italic |
| CTL_ChangeBold=Change &Thickness |
| CTL_AddItalic=Ita&licize |
| CTL_RemoveItalic=R&egular |
| CTL_AddBold=Ne&gra |
| CTL_RemoveBold=&Plain |
| |
| #display name of the StringEditor editing mode |
| StringEditor_DisplayName=Texto sen formato |
| CTL_NOI18NCheckBox=&Non internacionalizar esta cadea |
| ACD_NOI18NCheckBox=N/D |
| |
| #display name of the IconEditor editing mode |
| IconEditor_DisplayName=Selector de imaxe |
| |
| #display name of the ColorEditor editing mode |
| ColorEditor_DisplayName=Selector de cor |
| |
| #SpinnerModelEditor |
| SpinnerModelEditor=Spinner Model Editor |
| SpinnerModelEditor_ModelType=Tipo do &modelo\: |
| SpinnerModelEditor_ModelType_ACSD=N/D |
| SpinnerModelEditor_ModelProperties=Model Properties |
| SpinnerModelEditor_NumberType=&Number Type\: |
| SpinnerModelEditor_NumberType_ACSD=N/D |
| SpinnerModelEditor_InitialNumber=&Valor inicial\: |
| SpinnerModelEditor_InitialNumber_ACSD=N/D |
| SpinnerModelEditor_MinimumNumber=M\u00edn&imo\: |
| SpinnerModelEditor_MinimumNumber_ACSN=N\u00famero m\u00ednimo |
| SpinnerModelEditor_MinimumNumber_ACSD=N/D |
| SpinnerModelEditor_MaximumNumber=M\u00e1xim&o\: |
| SpinnerModelEditor_MaximumNumber_ACSN=N\u00famero m\u00e1ximo |
| SpinnerModelEditor_MaximumNumber_ACSD=N/D |
| SpinnerModelEditor_StepSize=&Step Size\: |
| SpinnerModelEditor_StepSize_ACSD=N/D |
| SpinnerModelEditor_InitialDate=&Valor inicial\: |
| SpinnerModelEditor_InitialDate_ACSD=N/D |
| SpinnerModelEditor_InitialNow=agora |
| SpinnerModelEditor_InitialNow_ACSD=Usar a data actual como valor inical |
| SpinnerModelEditor_MinimumDate=M\u00edn&imo\: |
| SpinnerModelEditor_MinimumDate_ACSN=Minimum Date |
| SpinnerModelEditor_MinimumDate_ACSD=N/D |
| SpinnerModelEditor_MinimumNow=agora |
| SpinnerModelEditor_MinimumNow_ACSD=Usar data actual como valor m\u00ednimo |
| SpinnerModelEditor_MaximumDate=M\u00e1xim&o\: |
| SpinnerModelEditor_MaximumDate_ACSN=Maximum Date |
| SpinnerModelEditor_MaximumDate_ACSD=N/D |
| SpinnerModelEditor_MaximumNow=agora |
| SpinnerModelEditor_MaximumNow_ACSD=Usar data actual como valor m\u00e1ximo |
| SpinnerModelEditor_CalendarField=&Step size\: |
| SpinnerModelEditor_ListItems=Elementos da &lista\: |
| SpinnerModelEditor_ListItems_ACSD=N/D |
| SpinnerModelEditor_InitialList=&Valor inicial\: |
| SpinnerModelEditor_InitialList_ACSD=N/D |
| SpinnerModelEditor_Default=Predefinido |
| SpinnerModelEditor_Date=Data |
| SpinnerModelEditor_List=Lista |
| SpinnerModelEditor_Number=N\u00famero |
| SpinnerModelEditor_Era=Era |
| SpinnerModelEditor_Year=Ano |
| SpinnerModelEditor_Month=Mes |
| SpinnerModelEditor_WeekOfYear=Semana do ano |
| SpinnerModelEditor_WeekOfMonth=Semana do mes |
| SpinnerModelEditor_DayOfMonth=Dia do mes |
| SpinnerModelEditor_DayOfYear=D\u00eda do ano |
| SpinnerModelEditor_DayOfWeek=D\u00eda da semana |
| SpinnerModelEditor_DayOfWeekInMonth=D\u00eda da semana no mes |
| SpinnerModelEditor_AMPM=AM/PM |
| SpinnerModelEditor_Hour=Hora |
| SpinnerModelEditor_HourOfDay=Hora do d\u00eda |
| SpinnerModelEditor_Minute=Minuto |
| SpinnerModelEditor_Second=Segundo |
| SpinnerModelEditor_Millisecond=Milisegundo |
| SpinnerModelEditor_Byte=Byte |
| SpinnerModelEditor_Double=Dobre |
| SpinnerModelEditor_Float=Float |
| SpinnerModelEditor_Integer=Enteiro |
| SpinnerModelEditor_Long=Longo |
| SpinnerModelEditor_Short=Short |
| SpinnerModelEditor_Item=Elemento {0} |
| #SpinnerModelEditor_SpinnerModel=[SpinnerModel] |
| |
| #JTableHeaderEditor |
| TableHeaderEditor=Table Header Editor |
| TableHeaderEditor_Resizing=Resizing Allowed |
| TableHeaderEditor_Reordering=Reordering Allowed |
| #TableHeaderEditor_TableHeader=[TableHeader] |
| |
| #TableColumnModelEditor |
| TableColumnModelEditor=Table Column Model Editor |
| TableColumnModelEditor_Customizer=Use table customizer to edit this property. |
| #TableColumnModelEditor_TableColumnModel=[TableColumnModel] |
| |
| #JTableSelectionModelEditor |
| JTableSelectionModelEditor_DEFAULT=Predefinido |
| JTableSelectionModelEditor_SINGLE_SELECTION=Single Selection |
| JTableSelectionModelEditor_SINGLE_INTERVAL_SELECTION=Single Interval Selection |
| JTableSelectionModelEditor_MULTIPLE_INTERVAL_SELECTION=Multiple Interval Selection |
| |
| #TreeModelEditor |
| CTL_TreeModelEditor_DisplayName=Tree Model Editor |
| TreeModelCustomizer.label.text=<html>&Enter the textual representation of your tree model in the text area on the left side. Cada fila non baleira corresponde a un nodo da \u00e1rbore. The nesting of the nodes is based on the indentation of the individual rows. |
| TreeModelCustomizer.warningLabel.text=<html>&Note that every tree must have exactly one root node. So, if there are two or more top level nodes then an artificial root node is created for you. You can hide it later using rootVisible property. |
| ACSD_TreeModelEditor_TextArea=This area allows you to enter textual representation of the tree. |
| ACSD_TreeModelEditor_Tree=Preview of the edited TreeModel. |
| #MSG_TreeModel=[TreeModel] |
| |
