| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| |
| #manifest's description entries |
| OpenIDE-Module-Name=Depurador de Java |
| OpenIDE-Module-Display-Category=Java SE |
| OpenIDE-Module-Short-Description=JPDA Debugger. |
| OpenIDE-Module-Long-Description=Contains UI for Java Debugger implementation. |
| |
| # File names on system filesystem |
| # Each key is resource path to a primary file |
| # Value gives localized display name for data node |
| Toolbars/Debug=&Depurar |
| Menu/RunProject/Stack=&Pila |
| |
| #SourcesView |
| Sourcess_view=C\u00f3digo fonte |
| |
| #JavaElementSelector |
| CTL_Loading_package_names=Cargando os nomes dos paquetes |
| CTL_searching=Buscando |
| CTL_clinit_description=Init des |
| CTL_init_description=Init |
| |
| #DebuggerViews |
| CTL_DebuggerConsole_Title = Consola do depurador |
| CTL_ProcessOutput_Title = Sa\u00edda do proceso |
| |
| #DebuggerOutput |
| CTL_Attaching_socket=Anexando a {0}:{1} |
| CTL_Attaching_shmem=A anexar a {0} |
| CTL_Attaching_pid=A anexar a {0} |
| # Used for an unknown transport method: |
| CTL_Attaching=A anexar... |
| CTL_Listening_shmem=A escoitar en {0} |
| CTL_Listening_socket=A escoitar en {0} |
| CTL_Launching=A lanzar: {0} |
| |
| CTL_Step_Into=Pasar a dentro |
| CTL_Step_Over=Pasar \u00e1 seguinte |
| CTL_Step_Out=Pasar a fora |
| CTL_Continue=Continuar |
| CTL_Pause=Pausa |
| |
| CTL_Debugger_running=Execut\u00e1ndose o programa do usuario |
| CTL_Debugger_paused=User program paused |
| CTL_Debugger_stopped=Det\u00edvose o programa do usuario |
| CTL_Debugger_finished=Finalizou o programa do usuario |
| CTL_Thread_stopped_no_line=Thread {0} stopped at {1}.{2}. |
| CTL_Thread_stopped_no_line_no_source=Thread {0} stopped. |
| CTL_Thread_stopped=Thread {0} stopped at {1}:{3}. |
| CTL_Thread_stopped_no_source=Thread {0} stopped at {1}:{3} - unavailable source file. |
| CTL_Thread_stopped_no_source_no_line=Thread {0} stopped at {1}.{2} - unavailable source file. |
| CTL_Thread_stopped_no_info=Thread {0} stopped at {1}:{3} - compiled without debug info. |
| CTL_Thread_stopped_no_info_no_line=Thread {0} stopped at {1}.{2} - compiled without debug info. |
| CTL_Thread_stopped_before_op=Thread {0} stopped before call to ''{4}()'' at {1}:{3}. |
| CTL_Thread_stopped_after_op=Thread {0} stopped after return from ''{4}()'' at {1}:{3}. |
| |
| #ConnectPanel |
| CTL_Connect=Anexar depurador |
| CTL_Connector_name=Depurador de Java (JPDA) |
| CTL_No_Connector=No connector found |
| CTL_Connector=&Conector: |
| CTL_Transport=&Transport: |
| ACSD_CTL_Transport= |
| ACSD_CTL_Connector= |
| ACSD_CTL_Argument=Insert {0} Argument |
| |
| CTL_CA_hostname=Servid&or: |
| CTL_CA_port=&Porto: |
| CTL_CA_javaExecutable=&Execut\u00e1bel de Java: |
| CTL_CA_core=C&orefile: |
| CTL_CA_debugServerName=Depurar &servidor: |
| CTL_CA_pid=&PID: |
| CTL_CA_name=&Nome: |
| CTL_CA_timeout=T&imeout [ms]: |
| CTL_CA_localAddress=Enderezos &locais: |
| |
| CTL_Invalid_value_title=Valor do par\u00e1metro incorrecto |
| CTL_Required_value_title=Requiriuse o valor do par\u00e1metro |
| MSG_Required_value=Necesita especificarse o valor de {0}. |
| MSG_Invalid_value=O valor de {0} non \u00e9 correcto. |
| CTL_Connection_refused=Rexeitouse a conexi\u00f3n. |
| CTL_Unknown_host=Host desco\u00f1ecido. |
| |
| CTL_Attach_to_socket=Anexar a {0}:{1} |
| CTL_Attach_to_shmem=Anexar ao enderezo {0} |
| CTL_Attach_to_pid=Anexar ao pid {0} |
| CTL_Listen_on_shmem=Escoita no enderezo {0} |
| CTL_Listen_on_socket=Escoita no porto {0} |
| |
| #StopActionPanel |
| CTL_Stop_debugging=\ Suspendeuse a depuraci\u00f3n |
| ACSD_CTL_Stop_debugging= |
| |
| #JavaProjectSettings |
| #not visible |
| CTL_JavaProjectSettings=Java |
| |
| #JavaDebuggerSettingsBeanInfo |
| HINT_Java_Debugger_option=Configuraci\u00f3ns do depurador Java |
| PROP_RunCompilation=Executar compilaci\u00f3n |
| HINT_RunCompilation=If True, classes are compiled before debugging is started. |
| PROP_ActionOnTraceInto=Action on Step Into |
| HINT_ActionOnTraceInto=Specifies an action to take upon stepping into a method without source code. |
| PROP_ActionOnTraceIntoSet=Show Action on Step Into Dialog |
| HINT_ActionOnTraceIntoSet=If True, asks for an action to take when you step into a method without source. |
| |
| #org.netbeans.modules.debugger.jpda.ui.JPDADebuggerProjectSettings |
| #Display name of settings of the "Attach to VM" dialog |
| CTL_Attach_settings=JPDA Debugger Attach Settings |
| |
| #Watch panel |
| CTL_Watch_Name=&Vixiar expresi\u00f3n: |
| ACSD_CTL_Watch_Name= |
| ACSD_WatchPanel= |
| |
| CTL_DeleteFixedWatch_Label = Delete Fixed Watch |
| CTL_CreateFixedWatch_Label = Crear vixiante fixo |
| |
| # CodeEvaluator |
| CTL_Code_Evaluator_name=Avaliar c\u00f3digo |
| CTL_Code_Evaluator_tooltip=Avaliar c\u00f3digo |
| CTL_Evaluator_Result_name=Resultado da avaliaci\u00f3n |
| CTL_Evaluator_Result_tooltip=Resultado da avaliaci\u00f3n |
| CTL_Expressions_Dropdown_tooltip=Mostrar os \u00faltimos fragmentos de c\u00f3digo avaliado |
| CTL_Expression=Expresi\u00f3n |
| CTL_Type=Tipo |
| CTL_Value=Valor |
| |
| Evaluator.Title=Avaliar expresi\u00f3n |
| |
| Evaluator.A11YDescr=Dialog where expressions can be evaluated in the application that is being debugged. |
| Evaluator.A11YName=Avaliaci\u00f3n da expresi\u00f3n |
| |
| Evaluator.Expression=&Expresi\u00f3n\: |
| |
| Evaluator.Result=&Resultado\: |
| Evaluator.ResultA11YName=Resultado da expresi\u00f3n |
| Evaluator.ResultA11YDescr=Resultado da avaliaci\u00f3n da expresi\u00f3n. |
| |
| Evaluator.Evaluate=Avaliar |
| Evaluator.Evaluate.TLT=Avaliar a expresi\u00f3n |
| |
| Evaluator.Watch=&Watch |
| Evaluator.Watch.TLT=Add the expression into Watches view. |
| |
| Evaluator.Close=Pechar |
| Evaluator.Close.TLT=Close the evaluator dialog. |
| |
| CTL_connectProgress=Attaching Debugger |
| |
| # BreakpointOutput |
| MSG_InvalidBreakpoint=Not able to submit breakpoint {0} |
| MSG_InvalidBreakpointWithReason=Not able to submit breakpoint {0}, reason: {1} |
| Link_InvalidBreakpoint={0} incorrecto |
| MSG_ValidBreakpoint={0} successfully submitted. |
| MSG_ValidBreakpointWithReason={0} partially submitted - not into all classes, reason: {1} |
| |
| Evaluator.ExpressionA11YDescr=A expresi\u00f3n a avaliar |
| |
| # Usage logging |
| # {0} connector instance |
| # {1} connector arguments |
| USG_DEBUG_ATTACH_JPDA=Debugger connect using connector {0} with arguments: {1} |
| CodeEvaluator.evaluateButton.text= |
| HistoryPanel.historyLabel.text=Historial: |
| HINT_Evaluate_Button=Avaliar o fragmento de c\u00f3digo (CTRL + Intro) |
| HINT_Show_History=Mostrar o historial de avaliaci\u00f3n |
| |
| # VariablesFormatter |
| MSG_CharSequenceFormatter=Default CharSequence Formatter |
| MSG_CollectionFormatter=Default Collection Formatter |
| MSG_MapFormatter=Default Map Formatter |
| MSG_MapEntryFormatter=Default Map.Entry Formatter |
| MSG_EnumFormatter=Default Enum Formatter |
| |
| # SourcePath |
| No_URL_Warning=Source path "{0}" was not found.\nThe reason is likely no opened project with this source file. |
| |