| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| |
| #ConnectorPanel |
| CTL_Connect_through=&Depurador: |
| ACSD_CTL_Connect_through=Tipo de depurador ao que conectar |
| ACSD_ConnectorPanel=Conecta o depurador a un proceso que est\u00e1 en execuci\u00f3n. |
| |
| |
| # Debugger Menu Actions |
| CTL_SessionsAction=Sesi\u00f3&ns |
| CTL_ThreadsAction=&F\u00edos |
| CTL_CallStackAction=Stac&k de chamadas |
| CTL_LocalVariablesAction=&Vari\u00e1beis |
| CTL_WatchesAction=&Vixiantes |
| CTL_BreakpointsAction=Puntos &de interrupci\u00f3n |
| CTL_SourcesAction=Fonte&s |
| |
| |
| # DebugMainProjectAction |
| # {0} - # of selected projects (0 if disabled), or -1 if main project |
| # {1} - project name, if exactly one project |
| LBL_DebugMainProjectAction_Name=&Depurar {0,choice,-1#proxecto principal|0#proxecto|1#proxecto ({1})|1<{0} proxectos} |
| LBL_DebugProjectAction_Name=Executar {0,choice,0#proxecto|1#proxecto ({1})|1<{0} proxectos} no depurador |
| |
| LBL_DebugProjectActionOnProject_Name=Depurar |
| |
| CTL_Attach_Types_Not_Found=No attach types were found. |
| CTL_Attach_Type_Not_Found=Requested attach type not found. |
| |
| # DebuggerAction |
| LBL_DebugSingleAction_Name=De&purar {0,choice,0#ficheiro|1#ficheiro|1<ficheiros} |
| LBL_DebugTestSingleAction_Name=Depurar {0,choice,0#fic&heiro|1#fic&heiro|1<fic&heiros} de proba |
| |
| |
| #NewWatch |
| CTL_New_Watch=Nova &vixiante... |
| |
| # Message displayed when executed application is not debuggable (not applet/no main method) |
| # {0} name of the class |
| FMT_MSG_CannotDebug=Cannot debug class {0} (not executable). |
| # Message displayed when an exception is thrown from the debugger |
| # {0} name of the class |
| FMT_EXC_Debugger=Depurar excepci\u00f3n: {0} |
| |
| #FinishAction |
| CTL_KillAction_name=&Finalizar sesi\u00f3n do depurador |
| |
| #StartAction |
| CTL_Start_action_name=Executa&r no depurador |
| |
| #StepIntoAction |
| CTL_Step_into_action_name=Paso para &entrar |
| |
| #StepIntoNextMethodAction |
| CTL_Step_into_next_method_action_name=Paso para entrar ao segui&nte m\u00e9todo |
| |
| #RunIntoMethodAction |
| CTL_Run_into_method_action_name=Run Into &Method |
| |
| #StepOverAction |
| CTL_Step_over_action_name=Pasar \u00e1 &seguinte |
| |
| #StepOutAction |
| CTL_Step_out_action_name=Pas&o para sa\u00edr |
| |
| CTL_Step_operation_action_name=Pasar \u00e1 seguinte &expresi\u00f3n |
| |
| #ContinueAction |
| CTL_Continue_action_name=&Continuar |
| |
| #PauseAction |
| CTL_Pause_action_name=&Deter |
| |
| #RunToCursorAction |
| CTL_Run_to_cursor_action_name=Exec&utar at\u00e9 o cursor |
| |
| CTL_Evaluate=Avaliar e&xpresi\u00f3n... |
| |
| #AddWatchPerformer |
| CTL_WatchDialog_Title=Novo vixiante |
| |
| #SuspendAction |
| CTL_Suspend=Suspender |
| |
| #ToggleBreakpointAction |
| CTL_Toggle_breakpoint=&Trocar li\u00f1a de punto de corte |
| |
| #ResumeAction |
| CTL_Resume=Continuar |
| |
| #FinishSessionAction |
| CTL_Finish_session=Finalizar |
| |
| #SwitchOnAction |
| CTL_SwitchOn=Facer a actual |
| |
| #SwitchToSessionAction |
| CTL_Switch_to_session=Facer a actual |
| |
| #AddBreakpointAction |
| CTL_Ok=Aceptar |
| CTL_Cancel=Cancelar |
| ACSD_CTL_Ok= |
| ACSD_CTL_Cancel= |
| CTL_AddBreakpoint=Novo &punto de corte... |
| CTL_Class_Name=Nome da clase: |
| CTL_Method_Name=Nome de m\u00e9todo: |
| EXC_Cannot_attach=Non se pode anexar. Comprobe os par\u00e1metros e t\u00e9nteo de novo |
| #com.sun.jdi.connect.IllegalConnectorArgumentValue |
| EXC_Illegal_attach_arguments={0,choice,1#Valor ilegal|2#Valores ilegais} {0,choice,1#do argumento|2#dos argumentos}: {1}. |
| CTL_Breakpoint_Title=Novo punto de interrupci\u00f3n |
| |
| #CreateVariableAction |
| CTL_CreateVariable=Crear vixiante fixo |
| |
| #GoToSourceAction |
| CTL_GoToSource=Ir \u00e1 fonte |
| |
| #GoToCallingMethodAction |
| CTL_MakeCallerCurrentAction_name=Make &Caller Current |
| #GoToCalledMethodAction |
| CTL_MakeCalleeCurrentAction_name=&Make Callee Current |
| |
| #DebuggerWindowAction |
| CTL_Debugger_Window_action_name=&Debugger Window |
| |
| #ConnectAction |
| CTL_Connect=&Engadir depurador... |
| EXC_Debugger=Excepci\u00f3n do depurador |
| CTL_Connect_to_running_process=Attach |
| |
| #AddBreakpointPanel |
| CTL_Breakpoint_cathegory=&Depurador: |
| CTL_Breakpoint_type=&Breakpoint Type: |
| CTL_Settings=Configuraci\u00f3ns |
| CTL_Actions=Acci\u00f3ns |
| ACSD_CTL_Breakpoint_cathegory=Debugger Types |
| ACSD_CTL_Breakpoint_type=Breakpoint Types |
| ACSD_CTL_Actions=Possible Actions When Reaching This Breakpoint |
| ACSD_AddBreakpointPanel=Novo punto de interrupci\u00f3n do tipo especificado |
| |
| #EnableAllBreakpointsAction |
| CTL_EnableAll=Activar todo |
| |
| #DisableAllBreakpointsAction |
| CTL_DisableAll=Desactivar todo |
| |
| #DeleteAllAction |
| CTL_DeleteAll=Eliminar todos |
| |
| #CreateVariableModificationBreakpointAction |
| CTL_CreateVariableModificationBreakpoint=New breakpoint on variable modification |
| |
| #CreateVariableAccessBreakpointAction |
| CTL_CreateVariableAccessBreakpoint=New breakpoint on variable access |
| #java.net.UnknownHostException |
| EXC_Cannot_attach_unknown_host=Cannot attach to the specified host - host unknown. |
| |
| #DisplayAsAction |
| CTL_Display_as_action=Mostrar como |
| CTL_Type_DEC=Decimal |
| CTL_Type_HEX=Hexadecimal |
| CTL_Type_BIN=Binario |
| CTL_Type_OCT=Octal |
| |
| CTL_SwitchToLocationAction=Facer a actual |
| #Means "Replace definition of (a class, method or another part of an application) at runtime." |
| CTL_Fix_action_name=Apl&icar cambios no c\u00f3digo |
| |
| #Means "Pop topmost (the most recently called) stack frame from the current thread" |
| CTL_PopTopmostCallAction_name=&Extraer a chamada da cima |
| |
| CTL_Debugger_Window=Xanelo do depurador |
| |
| # BreakpointEnableAction |
| |
| CTL_enabled=Act&ivado |
| |
| # BreakpointCustomizeAction |
| |
| CTL_customize=&Propiedades |
| CTL_Breakpoint_Customizer_Title=Propiedades do punto de interrupci\u00f3n |
| # {0} Breakpoint |
| ACSD_Breakpoint_Customizer=Propiedades de {0} |
| |
| # {0} Project type |
| USG_PROJECT_DEBUG=Depurar o proxecto principal {0} |
| |
| # {0} Attach type |
| USG_DEBUG_ATTACH=Connecting via connect type {0} |
| |
