| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| # OLD # |
| # OLD # AttachDialogAction |
| # OLD # |
| # OLD ATTACHDIALOG_ACTION_NAME=&Attach... |
| |
| ACSD_OK=Aceptar |
| ACSD_Cancel=Cancelar |
| |
| # |
| # AttachPanel |
| # |
| Refresh=Actualizar |
| MNEM_Refresh=R |
| ACSD_Refresh=Actualizar lista de procesos |
| |
| CTL_Attach=Anexar depurador |
| ACSD_CTL_AttachToProcess=Allows attaching to an arbitrary running process |
| AttachProcDiag_FilterColon=Filtro: |
| MNEM_AttachProcDiag_Filter=F |
| AttachProcDiag_HostColon=Equipo: |
| MNEM_AttachProcDiag_Host=H |
| AttachProcDiag_Table=Procesos para anexar: |
| MNEM_AttachProcDiag_Table=A |
| ACSD_AttachProcDiag_Table=Lista de procesos dispo\u00f1\u00edbeis |
| RegExp=Expresi\u00f3n regular |
| HostName=Nome de equipo |
| FromProcess=<Desde o proceso> |
| |
| All_Processes_Lab=Todos os procesos do usuario |
| All_Processes=Marcar para obter todos os procesos de todos os usuarios |
| MNEM_All_Processes=P |
| ACSD_All_Processes=Marcar para obter todos os procesos de todos os usuarios |
| |
| MNEM_Hosts=s |
| ACSD_EditHosts=Editar lista de equipos |
| MNEM_Engine=d |
| ACSD_Engine=Motor do depurador |
| ACSD_Debugging_Engine=Motor de depuraci\u00f3n |
| ASSOCIATED_ENGINE_LBL=Motor do depurador: |
| |
| ERROR_WRONG_FAMILY=Aviso: o proxecto seleccionado non est\u00e1 configurado para este depurador |
| |
| MSG_Gathering_Data=Gathering data... |
| MSG_PS_Failed=produciuse un fallo en ps, consultar o rexistro para m\u00e1is detalles |
| |
| # |
| # DebugCoreNodeAction |
| # |
| AutoCoreExe=<desde o n\u00facleo> |
| MSG_BadExecutable=An invalid executable name was given in the core file chooser |
| MSG_BadCoreFile=An invalid core file name was given in the core file chooser |
| CTL_DebugCorefile=Debug Core File... |
| |
| # |
| # DebugCorePanel |
| # |
| ACSD_Debug=Depurar |
| ACSD_DebugCoreFile=Debug core file |
| ACSN_Guidance=Guidance Text |
| LOADCORE_GUIDANCETEXT1=Select a core file and an executable to use with it. |
| LOADCORE_GUIDANCETEXT2=Select an executable and a project to use with the core file. |
| LOADCORE_COREFILE_LBL=Core File: |
| LOADCORE_COREFILE_MN=C |
| LOADCORE_COREFILEBROWSE_BUTTON_MN=B |
| ACSD_Corefile=Corefile to debug |
| ACSD_CorefileBrowse=Browse for core file |
| CorefileChooser=Select Core File |
| ERROR_CORE_NOT_SPECIFIED=No core file specified |
| ERROR_CORE_DONTEXIST=The selected core file does not exist |
| ERROR_NOTACOREFILE=The selected file is not a core file |
| ACSD_Project=Project to use |
| |
| # |
| # DebugExecDialog |
| # |
| ERROR_RUNDIR_DONTEXIST=O cartafol de traballo non existe |
| ERROR_RUNDIR_INVALID=Cartafol de traballo incorrecto |
| EXISTING_PROJECT=Warning : any properties change here of the chosen project will make a permanent change of the project properties. |
| SelectExecutable=Seleccionar execut\u00e1bel |
| SelectLabel=Seleccionar |
| DIALOG_GUIDANCETEXT=Enter an executable to use with it. |
| EXECUTABLE_LBL=Execut\u00e1bel: |
| EXECUTABLE_MN=x |
| EXECUTABLE_AD=Cami\u00f1o ao execut\u00e1bel |
| BROWSE_BUTTON_TXT=Examinar... |
| BROWSE_BUTTON_MN=B |
| ASSOCIATED_PROJECT_LBL=Proxecto: |
| ASSOCIATED_PROJECT_MN=P |
| RUN_DIRECTORY_LABEL_TXT=Cartafol de traballo\: |
| RUN_DIRECTORY_LABEL_MN=W |
| RUN_DIRECTORY_BUTTON_TXT=Examinar... |
| RUN_DIRECTORY_BUTTON_MN=r |
| ARGUMENTS_LABEL_TXT=Argumentos\: |
| ARGUMENTS_DIALOG=Argumentos |
| ARGUMENTS_LABEL_MN=A |
| ARGUMENT_BUTTON_MN=Argumentos |
| ARGUMENT_BUTTON_TXT=Argumentos |
| ENVIRONMENT_LABEL_TXT=Contorno\: |
| ENVIRONMENTS_DIALOG=Vari\u00e1beis do contorno |
| ENVIRONMENTS_LABEL=Vari\u00e1beis do contorno\: |
| ENVIRONMENT_LABEL_MN=E |
| ENVS_BUTTON_MN=Contorno |
| ENVIRONMENT_BUTTON_TXT=Contorno... |
| EnvName=Nome |
| EnvValue=Valor |
| PATHMAP_BUTTON_TXT=Pathmap... |
| SIGNALS_BUTTON_TXT=Sinais... |
| EXCEPTIONS_BUTTON_TXT=Excepci\u00f3ns... |
| OPTIONS_BUTTON_TXT=Opci\u00f3ns... |
| |
| |
| # |
| # DebugCorePanel & ExecutableProjectPanel (used in AttachDialog) |
| # |
| EXECUTABLE_MN=x |
| EXECUTABLE_LBL=Execut\u00e1bel: |
| EXECUTABLEBROWSE_BUTTON_MN=o |
| ACSD_ExecutableBrowse=Buscar polo execut\u00e1bel |
| BROWSE_BUTTON_TXT=Examinar... |
| ASSOCIATED_PROJECT_MN=P |
| MNEM_Project=P |
| ASSOCIATED_PROJECT_LBL=Proxecto: |
| RUN_PROFILE_MN=R |
| RUN_PROFILE_LBL=Executar analizador: |
| RUN_PROFILES_BUTTON_MN=e |
| RUN_PROFILES_BUTTON_TXT=Editar... |
| SelectExecutable=Seleccionar execut\u00e1bel |
| CHOOSER_BUTTON=Seleccionar |
| DEFAULT_SET_TITLE=Default Set |
| NEW_PROJECT=<crear novo proxecto> |
| NO_PROJECT=<sen proxecto> |
| DBG_ERROR_DONTEXIST=The selected executable does not exist, this debugger requires valid executable to attach |
| // OLD GDB_ERROR_DONTAPPLY=dbxtool does not allow gdb debugger |
| ERROR_NEED_EXEC=This debugger requires executable name to attach |
| ERROR_DONTAPPLY=Non se admite este depurador |
| DBX_ERROR_DONTAPPLY=gdbtool non permite o depurador dbx |
| ERROR_DONTEXIST=Non existe o execut\u00e1bel seleccionado |
| ERROR_NOTAEXEFILE=O ficheiro seleccionado non \u00e9 un execut\u00e1bel |
| ProgramPathname=Con este depurador pode restaurar puntos de interrupci\u00f3n gardados na sesi\u00f3n anterior |
| |
| # |
| # DebugCoreAction |
| # |
| AutoCoreExe=<desde o n\u00facleo> |
| LOADCOREDIALOGACTION_NAME=Debug C&ore File... |
| DEBUG_BUTTON_TXT=Depurar |
| LBL_DebugCorefile=Debug Core File |
| ERROR_NOTACOREFILE=The selected file is not a core file |
| |
| # |
| # DebugProjectAction |
| # |
| # LBL_LoadProgram=Load program |
| LBL_LoadProgram=Load program... |
| LBL_Start=Depurar o proxecto principal |
| LBL_Continue=&Continuar |
| CoreExeChooser=Choose Executable |
| |
| # |
| # DebuggingOptionsAction |
| # |
| CTL_DebuggingOptions=&Debugging Options... |
| |
| # |
| # DetachAction |
| # |
| LBL_Detach=&Detach Debugger |
| |
| # |
| # Assembly Mode Actions |
| # |
| LBL_StepInstAction=Stepi Into |
| LBL_StepOverInstAction=Stepi Over |
| LBL_StepOutInstAction=Stepi Out |
| LBL_RunToCursorInstAction=Executar at\u00e9 o cursor |
| TIP_StepInstAction=Step an Assembly Instruction |
| TIP_StepOverInstAction=Step Over Assembly Instruction |
| TIP_StepOutInstAction=Step Out to After Assembly Callsite |
| TIP_RunToCursorInstAction=Executar a instruci\u00f3n do cursor |
| |
| # |
| # RunToFunctionAction |
| LBL_RunToFunctionAction=Step Into Last Function |
| TIP_RunToFunctionAction=Step Into Last or Selected Function Called From Current Line |
| |
| # |
| # ContinueAtAction |
| LBL_ContinueAtAction=&Continuar en... |
| TIP_ContinueAtAction=Continuar na li\u00f1a seleccionada |
| |
| # |
| # RerunAction |
| # |
| LBL_RerunProcess=&Reiniciar |
| LBL_RunProcess=Executa&r |
| # |
| # TerminateProcessAction |
| # |
| LBL_TerminateProcess=T&erminar procesos |
| |
| # |
| # PopLastDebuggerCallAction |
| # |
| LBL_PopCall=Pop &Last Debugger Call |
| |
| # |
| # PopToCurrentFrameAction |
| # |
| LBL_PopToCurrent=Pop To Current &Stack Frame |
| |
| # |
| # Max Frames |
| # |
| TTL_MaxFrames=Max Frames |
| ACSD_MaxFrames=Set maximum number of stack frames to be displayed |
| ACT_Max_Frames=Set Max Frames |
| LBL_max_frames=Set Max Frames |
| MNEM_MaxFrames=m |
| |
| # |
| # AddWatchAction |
| # |
| ACT_WATCH_NewWatch=Novo vixiante |
| |
| # |
| # Max Object Size |
| # |
| TTL_MaxObjectSize=Max Object Size |
| ACSD_MaxObjectSize=Set maximum size of object to be displayed |
| ACT_Max_Object_Size=Set Max Object Size |
| LBL_max_object_size=Max Object Size |
| MNEM_MaxObjectSize=m |
| |
| # |
| # EditWatchPanel |
| # |
| TTL_NewWatch=Novo vixiante |
| ACSD_NewWatch=Novo vixiante |
| |
| LBL_Scope=\u00c1mbito: |
| LBL_Expression=Expresi\u00f3n: |
| LBL_QForm=Qualified Form: |
| |
| LBL_UseQForm=Use Qualified Form |
| MNEM_UseQForm=Q |
| ACSD_UseQForm=Use Qualified Form |
| |
| LBL_WatchExpression=Vixiar expresi\u00f3n: |
| MNEM_WatchExpression=W |
| ACSD_WatchExpression=Vixiar expresi\u00f3n: |
| |
| # LBL_Restrict=Restrict to scope: |
| # LBL_Restrict=Evaluate this expression in the following scope: |
| |
| LBL_Restrict0=Choose which scope to parse this expression in: |
| LBL_Restrict11=Scope at the time application is stopped. |
| LBL_Restrict12=O \u00e1mbito actual: |
| |
| MSG_EMPTY_WATCH=Empty watch expression |
| |
| # |
| # NewBreakpointAction |
| # |
| ACT_BPT_NewBreakpoint=Novo punto de interrupci\u00f3n ... |
| TITLE_NewBreakpoint=Novo punto de interrupci\u00f3n |
| |
| # |
| # Other action labels |
| # |
| # OLD CTL_ClearAllBreakpointsAction=C&lear All Breakpoints |
| # OLD CTL_DisableAllBreakpointsAction=Disable &All Breakpoints |
| # OLD CTL_EnableAllBreakpointsAction=E&nable All Breakpoints |
| |
| # OLD CTL_PostExceptionsDialogAction=E&xceptions... |
| |
| # |
| # Dbx Command I/O, Process I/O |
| # |
| CTL_Cmdio=Consola do depurador |
| CTL_Pio=Pro&cess I/O |
| |
| # OLD #StartRawDbxAction |
| # OLD StartRawDbxAction=Start Dbx Debugger |
| |
| # |
| # DebugExecutableNodeAction |
| # |
| DEBUG_DIALOG_TITLE=Debug Executable |
| DEBUG_ACTION_NAME=Depurar |
| |
| # |
| # DebugFileAction |
| # |
| TITLE_Hosts=Hosts... |
| MNEM_Host=H |
| HOST_LBL=Equipo: |
| |
| # |
| # StartCollector |
| # StopCollector |
| # |
| ANALYZER_STARTCOLLECTOR=&Enable Collector |
| ANALYZER_STOPCOLLECTOR=&Disable Collector |
| |
| |
| # |
| # Registers, Memory, Disassembler, Evaluation |
| # |
| CTL_Registers=&Rexistros |
| CTL_Memory=Mem&oria |
| CTL_Disassembly=Desensa&mblar |
| CTL_ExpressionEvaluation=Avaliaci\u00f3n da expresi\u00f3n |
| LBL_EvaluateAction=Avaliar expresi\u00f3n |
| |
| DEFAULT_MODE_RegistersWindow=depurador |
| DEFAULT_MODE_MemoryWindow=depurador |
| DEFAULT_MODE_DisassemblerWindow=editor |
| |
| DEFAULT_MODE_EvaluationWindow=depurador |
| |
| ADD_BUTTON=Engadir |
| REMOVE_BUTTON=Eliminar |
| |
| # OLD # |
| # OLD # Debug->Windows menu stuff |
| # OLD # |
| # OLD |
| # OLD CTL_DebugWindowsMenuAction=Windows |
| # OLD MNEM_DebugWindowsMenuAction=W |
| |
| OUTPUT_ATTACH_ACTION_TEXT=Anexar depurador |
| |
| ATTACH_HISTORY_MESSAGE=Attach to {0}@{1} process |
| |
| Dis_ACT_Go_To_Source=Go To Source Code |
| Dis_ACT_Show_Current_Statement=Mostrar instruci\u00f3n actual |
| |
