| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| |
| |
| # manifest |
| OpenIDE-Module-Name=API de syst\u00e8me de fichiers |
| OpenIDE-Module-Display-Category=Infrastructure |
| OpenIDE-Module-Short-Description=API du syst\u00e8me de fichiers virtuel. |
| OpenIDE-Module-Long-Description=Permet d'acc\u00e9der aux ressources de type fichier de fa\u00e7on ind\u00e9pendante sur les fichiers r\u00e9els du syst\u00e8me d'exploitation. Prend en charge la notification des modifications sur le disque. |
| |
| |
| |
| # {0} = system name of the filesystem |
| LAB_FileSystemInvalid={0} non valide |
| # {0} = system name of the filesystem |
| |
| # {0} = name of the file |
| # LAB_FileInvalid={0} |
| |
| # {0} = file to the root |
| EXC_RootNotExist=La racine {0} n''existe pas. |
| |
| # {0} - filesystem |
| EXC_CannotDeleteRoot=Impossible de supprimer la racine du syst\u00e8me de fichiers {0}. |
| |
| # {0} = name of FS |
| EXC_CannotRenameRoot=Impossible de renommer la racine du syst\u00e8me de fichiers {0}. |
| |
| |
| # {0} - folder that cannot be deleted |
| # {1} - filesystem |
| EXC_CannotDelete=Impossible de supprimer le fichier {0} dans {1}. |
| |
| # {0} - target folder |
| # {1} - the folder to operate on |
| EXC_OperateChild=Impossible d''effectuer l''op\u00e9ration car {0} est l''enfant de {1}. |
| |
| # {0} - target folder |
| # {1} - the folder to operate on |
| EXC_CopyChild=Impossible d''effectuer la copie car {0} est l''enfant de {1}. |
| |
| # {0} - target folder |
| # {1} - the folder to operate on |
| EXC_MoveChild=Impossible d''effectuer la copie car {0} est l''enfant de {1}. |
| |
| # {0} - folder that cannot be deleted |
| # {1} - filesystem |
| # {2} - one file that is in the folder |
| # EXC_CannotDeleteNotEmpty=Cannot delete folder {0} in {1}. Folder is not empty (file {2} exists in the folder). |
| |
| |
| # {0} = original name of the file |
| # {1} = name of FS |
| # EXC_BadName=File {0} in {1} cannot be renamed to name without extension. |
| |
| # {0} = original name of the file |
| # {1} = name of FS |
| # {2} = new name of the file (with extension) |
| # {3} = does the new file exists |
| # {4} = result of rename |
| EXC_CannotRename=Impossible de renommer le fichier {0} dans {1} en {2}. Un nouveau fichier existe : {3}. R\u00e9sultat du changement de nom : {4}. |
| |
| # Simpler version of the above message |
| # {0} name of file we rename from |
| # {1} name of the filesystem we are on |
| # {2} name of file we rename to |
| EXC_CannotRenameFromTo=Impossible de renommer le fichier {0} en {2} sur {1} |
| |
| # {0} = display name of the filesystem |
| EXC_FSisRO=Le syst\u00e8me de fichiers {0} est en lecture seule. |
| |
| # {0} = name of the file |
| # {1} = filesystem |
| EXC_FisRO=Le fichier {0} dans {1} est en lecture seule. |
| |
| # {0} = name of the file |
| # {1} = name of "not folder" |
| # {2} = filesystem |
| EXC_FoNotFolder=Impossible de cr\u00e9er le fichier {0} car {1} sur le syst\u00e8me de fichiers {2} n''est pas un dossier. |
| |
| # {0} = name of the folder |
| EXC_SlashNotAllowed=La barre oblique n''est pas autoris\u00e9e dans le nom de dossier "{0}". |
| |
| # {0} = name of file to create |
| # {1} = filesystem |
| # {2} = full system name of the file |
| EXC_FolderAlreadyExist=Le dossier {0} existe d\u00e9j\u00e0 dans {1} ({2}). |
| |
| # {0} = name of file to create |
| # {1} = filesystem |
| # {2} = full system name of the file |
| EXC_CannotCreateF=Impossible de cr\u00e9er le dossier {0} dans {1} ({2}). |
| |
| # {0} = name of the file to create folder in |
| # {1} = name of the filesystem |
| # {2} = name of the file to create |
| # {3} = extension of the file to create |
| # EXC_CannotCreateFinData=Cannot create {2}.{3} in file {0} on filesystem {1}. |
| |
| # {0} = name of file to create |
| # {1} = filesystem |
| # {2} = full system name of the file |
| EXC_DataAlreadyExist=Le fichier {0} existe d\u00e9j\u00e0 dans le syst\u00e8me de fichiers {1} ({2}). |
| |
| # {0} = name of the folder to create in |
| # {1} = filesystem |
| # {2} = name of the file to create |
| # {3} = extension of the file to create |
| EXC_CannotCreateD=Impossible de cr\u00e9er le fichier {2}.{3} dans le dossier {0} sur le syst\u00e8me de fichiers {1}. |
| |
| # {0} = instance of tested lock |
| # {1} = name of the file |
| # {2} = filesystem |
| # {3} = instance of current lock |
| EXC_InvalidLock=Verrou [{0}] non valide pour le fichier {1} dans {2} avec le verrou en cours [{3}]. |
| |
| # When getOutputStream ().close () is called and we cannot delete the original file |
| # {0} name of file that we cannot delete |
| # EXC_CannotDeleteOriginal=Cannot delete old version of file {0}. |
| |
| #FileAttributes locale |
| EXC_Cannot_modify=Impossible de modifier le fichier filesystem.attributes : |
| |
| |
| # Application error |
| # {0} = folder name |
| # {1} = name of file |
| EXC_ApplicationCreateError=Fichier {1} introuvable dans le dossier {0}. |
| |
| # Application error |
| # {0} = folder name |
| # {1} = name of file |
| # {2} = file system string representation |
| # {3} = file object string representation |
| EXC_ApplicationCreateErrorMulti=Fichier {1} introuvable dans le dossier {0} (FileSystem {2}, FileObject {3}). |
| |
| |
| # {0} - unused |
| # {1} - unused |
| # {2} - file path |
| EXC_CannotLock={2} est en lecture seule. |
| |
| # JAR |
| |
| # {0} - entry path |
| # {1} - ZIP file path |
| EXC_CannotLock_JAR={0} est en lecture seule car il se trouve dans {1}. |
| |
| # {0} = name of zip file |
| EXC_FileNotExists=Le fichier {0} n''existe pas. |
| |
| # {0} = name of zip file |
| EXC_CanntRead=Impossible de lire le fichier {0}. |
| |
| # {0} = name of zip file |
| EXC_NotValidFile=Erreur dans le fichier {0}. |
| |
| # {0} - exception text |
| # {1} - name of zip file |
| EXC_NotValidJarFile2=Erreur dans le fichier JAR {1} : {0} |
| |
| #JAR_NotValidJarFileSystem=Invalid JAR. |
| JAR_UnknownJar=Fichier JAR inconnu |
| #JAR_JarFileSystem=Jar FS |
| #JAR_FileName=File name |
| CTL_MultiFileSystem=Syst\u00e8mes de fichiers multiples |
| EXC_FileOutsideModified=Fichier {0} introuvable. Une autre application a peut \u00eatre d\u00e9plac\u00e9 ou renomm\u00e9 le fichier. |
| XML_NotValidXMLFileSystem=Syst\u00e8me de fichiers XML non valide. |
| EXC_DefAttrReadErr=Impossible de lire DefaultAttributes. |
| EXC_UnreachableCode=Erreur interne : code inaccessible. |
| |
| EXC_FolderCopy=Copie du dossier non prise en charge. |
| XML_RootInvalid=L'\u00e9l\u00e9ment FileSystem doit \u00eatre l'\u00e9l\u00e9ment racine. |
| XML_MisssingAttr=L'attribut "name" est manquant |
| XML_InaccurateParam=Nombre de param\u00e8tres incorrect |
| XML_UnknownElement=El\u00e9ment inconnu. |
| XML_DuplElement=El\u00e9ment FileObject dupliqu\u00e9 : |
| |
| # FileUtil |
| # {0} - relative file path |
| # {1} - filesystem display name |
| LBL_file_in_filesystem={0} dans {1} |
| |
| # Logging |
| MSG_CACHED_INPUT_STREAM=Ouverture du flux pour {0} |
| |