| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2007 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| |
| |
| #BreakpointActionsProvider |
| CTL_Breakpoint_Customizer_Title=Propri\u00e9t\u00e9s du point d'arr\u00eat |
| ACSD_Breakpoint_Customizer_Dialog=Personnalisation des propri\u00e9t\u00e9s du point d'arr\u00eat |
| |
| #BreakpointsNodeModel |
| CTL_Line_Breakpoint=Ligne {0}\u00a0:{1} |
| CTL_Thread_Started_Breakpoint=D\u00e9marrage d'un thread |
| CTL_Thread_Death_Breakpoint=Mort d'un thread |
| CTL_Thread_Breakpoint=D\u00e9marrage ou mort d'un thread |
| CTL_Field_Access_Breakpoint=Field {0}.{1} access |
| CTL_Field_Modification_Breakpoint=Field {0}.{1} modification |
| CTL_Field_Access_or_Modification_Breakpoint=Field {0}.{1} access or modification |
| CTL_Method_Breakpoint=Method {0}.{1} |
| CTL_All_Methods_Breakpoint=M\u00e9thodes {0} |
| CTL_Class_Loaded_Breakpoint=Class {0} load |
| CTL_Class_Unloaded_Breakpoint=D\u00e9chargement de la classe {0} |
| CTL_Class_Breakpoint=Class {0} load / unload |
| CTL_Exception_Catched_Breakpoint=Exception {0} intercept\u00e9e |
| CTL_Exception_Uncatched_Breakpoint=Exception {0} non intercept\u00e9e |
| CTL_Exception_Breakpoint=Exception{0} |
| |
| CTL_APPEND_BP_Valid=[Submitted] |
| CTL_APPEND_BP_Invalid=[Invalid] |
| CTL_APPEND_BP_Invalid_with_reason=[Invalid, reason: {0}] |
| |
| |
| #WatchesActionsProvider |
| CTL_WatchAction_AddNew = Nouveau t\u00e9moin... |
| CTL_WatchAction_DeleteAll = Tout supprimer |
| CTL_WatchAction_Delete = Supprimer |
| CTL_WatchAction_Customize = \u00c9diter |
| CTL_Edit_Watch_Dialog_Title=\u00c9diter - {0} |
| CTL_New_Watch_Dialog_Title=Nouveau t\u00e9moin |
| |
| |
| #LocalsDisplayFilter |
| CTL_Variable_DisplayAs_Popup = Afficher en tant que |
| CTL_Variable_DisplayAs_Decimal = D\u00e9cimal |
| CTL_Variable_DisplayAs_Hexadecimal = Hexad\u00e9cimal |
| CTL_Variable_DisplayAs_Octal = Octal |
| CTL_Variable_DisplayAs_Binary = Binaire |
| CTL_Variable_DisplayAs_Character = Caract\u00e8re |
| CTL_Variable_DisplayAs_Time = Heure |
| |
| #SessionsView |
| CTL_Session_Resume_Threads = \u00c9tendue |
| CTL_Session_Resume_All_Threads = D\u00e9boguer tous les threads |
| CTL_Session_Resume_Current_Thread = D\u00e9boguer le thread actif |
| CTL_Session_Popup_Language = &Langage |
| |
| #BreakpointsActionsProvider |
| CTL_Breakpoint_Customize_Label = Propri\u00e9t\u00e9s |
| |
| #ThreadsTableModel - old Threads view |
| CTL_Thread_Status_OnMonitor = Sur le moniteur |
| CTL_Thread_Status_NotStarted = Non d\u00e9marr\u00e9 |
| CTL_Thread_Status_Running = En cours d'ex\u00e9cution |
| CTL_Thread_Status_Sleeping = Sommeil |
| CTL_Thread_Status_Unknown = Inconnu |
| CTL_Thread_Status_Waiting = En attente |
| CTL_Thread_Status_Zombie = Zombie |
| CTL_ThreadAction_Interrupt_Label=Interrompre |
| |
| #CallStackTableModel |
| MSG_Callstack_NoInformation = aucune information |
| NoCurrentThread=No call stack to display because there is no current thread. |
| ThreadIsRunning=Le thread s\u00e9lectionn\u00e9 est ex\u00e9cut\u00e9\u00a0; aucune pile d'appels n'est disponible. |
| |
| MSG_NoSourceInfo=No source information is available. |
| |
| #SessionsTableModel |
| MSG_Session_State_Disconnected = D\u00e9connect\u00e9e |
| MSG_Session_State_Running = En cours d'ex\u00e9cution |
| MSG_Session_State_Starting = D\u00e9marrage |
| MSG_Session_State_Stopped = Arr\u00eat\u00e9e |
| |
| #CallStackNodeModel |
| CTL_CallstackModel_Column_Name_Name = Nom |
| CTL_CallstackModel_Column_Name_Desc = Nom du cadre de la pile |
| CTL_CallStackFrame=Call Stack Frame: {0} |
| CTL_RunType=Run type: {0} |
| |
| #ClassesActionsProvider |
| LBL_change_package_type=&View Packages as |
| ChangePackageViewTypeAction_list=&Liste |
| ChangePackageViewTypeAction_tree=Ar&borescence |
| |
| #ClassesNodeModel |
| CTL_ClassesModel_Column_Name_Name = &Nom |
| CTL_ClassesModel_Column_Name_Desc = Nom de la classe ou du package |
| CTL_ClassesModel_Column_Name_AppClassLoader = Chargeur de classe de l'application |
| CTL_ClassesModel_Column_Name_ClassLoader = Chargeur de classe {0} |
| CTL_ClassesModel_Column_Name_SystemClassLoader = Chargeur de classe du syst\u00e8me |
| CTL_ClassesModel_Column_Name_Package = Package {0} |
| CTL_ClassesModel_Column_Name_Class = Classe{0} |
| CTL_ClassesModel_Column_Name_Interface = Interface {0} |
| CTL_ClassesModel_Column_Name_LoadedBy = chargement effectu\u00e9 par {0} |
| |
| #MonitorModel |
| CTL_MonitorModel_Column_ContendedMonitor = Waiting for Monitor: {0} ({1}) |
| CTL_MonitorModel_Column_OwnedMonitors = Moniteurs appartenant \u00e0 |
| CTL_MonitorModel_Column_Monitor = Owned Monitor: {0} ({1}) |
| |
| #SourcesModel |
| CTL_SourcesModel_Column_Name_Name=&Source Root |
| CTL_SourcesModel_Column_Name_Desc=Origine des sources |
| CTL_SourcesModel_Action_AddFilter = Ajouter un filtre d'exclusion de classe |
| CTL_SourcesModel_NewFilter_Filter_Label = Class Exclusion &Filter: |
| CTL_SourcesModel_NewFilter_Title = Bo\u00eete de dialogue Ajout d'un filtre d'exclusion de classe |
| CTL_SourcesModel_Action_Delete = Supprimer |
| CTL_SourcesModel_Name_DoNotStopIn = Ne pas s'arr\u00eater \u00e0\u00a0 |
| CTL_SourcesModel_Action_AddSrc = Add Source Root |
| CTL_SourcesModel_AddSrc_Chooser_Filter_Description = Source Roots |
| CTL_SourcesModel_AddSrc_Btn = Ajouter |
| CTL_SourcesModel_MoveUpSrc = D\u00e9placer vers le haut |
| CTL_SourcesModel_MoveDownSrc = D\u00e9placer vers le bas |
| CTL_SourcesModel_ResetOrderSrc = Reset Order |
| |
| #ThreadsModel |
| |
| CTL_ThreadsModel_Suspended_Thread_Desc = Thread suspendu par le d\u00e9bogueur |
| CTL_ThreadsModel_Resumed_Thread_Desc = Running thread |
| CTL_ThreadsModel_Thread_State_Desc = State in VM: {0} |
| CTL_ThreadsModel_Column_Name_Name = Nom |
| CTL_ThreadsModel_Column_Name_Desc = Displays all threads for current session |
| CTL_ThreadsModel_State_Unknown = Inconnu |
| CTL_ThreadsModel_State_Monitor = En attente du bloc synchronis\u00e9 |
| CTL_ThreadsModel_State_ConcreteMonitor = En attente du bloc synchronis\u00e9 ({0}) |
| CTL_ThreadsModel_State_NotStarted = Non d\u00e9marr\u00e9 |
| CTL_ThreadsModel_State_Running = En cours d'ex\u00e9cution |
| CTL_ThreadsModel_State_Sleeping = Sommeil |
| CTL_ThreadsModel_State_Waiting = En attente |
| CTL_ThreadsModel_State_WaitingOn = En attente de {0} |
| CTL_ThreadsModel_State_Zombie = Zombie |
| |
| #WatchesModel |
| CTL_WatchesModel_Column_Name_Name = Nom |
| CTL_WatchesModel_Empty_Watch_Hint = Entrez une nouvelle expression \u00e0 surveiller |
| |
| #Watches View |
| CTL_WatchesView_Column_Name_Name = &Nom |
| CTL_WatchesView_Column_Name_Desc = Nom du t\u00e9moin |
| #CTL_WatchesView_Column_ToString_Name = to&String() |
| CTL_WatchesView_Column_ToString_Desc = Affiche la valeur de l'appel de m\u00e9thode toString() |
| CTL_WatchesView_Column_Type_Name = &Type |
| CTL_WatchesView_Column_Type_Desc = Type de r\u00e9sultat |
| CTL_WatchesView_Column_Value_Name = &Valeur |
| CTL_WatchesView_Column_Value_Desc = Valeur de l'expression du t\u00e9moin |
| CTL_LocalsView_Column_Name_Name = &Nom |
| CTL_LocalsView_Column_Name_Desc = Nom de la variable |
| |
| #ThreadsActionsProvider |
| CTL_ThreadAction_MakeCurrent_Label = Activer |
| CTL_ThreadAction_GoToSource_Label = Aller \u00e0 la source |
| CTL_ThreadAction_Suspend_Label = Suspendre |
| CTL_ThreadAction_Resume_Label = Reprendre |
| |
| #ThreadsActionsProvider |
| CTL_CallstackAction_MakeCurrent_Label = Activer |
| CTL_CallstackAction_PopToHere_Label = D\u00e9piler ici |
| CTL_CallstackAction_Copy2CLBD_Label = Copy Stack |
| |
| # Debugging |
| CTL_Debugging_Column_Name_Name=&Threads |
| CTL_Debugging_Column_Name_Desc=Session threads with call stacks |
| CTL_Debugging_Column_Suspend_Name=&Suspend |
| CTL_Debugging_Column_Suspend_Desc=Suspend status |
| |
| CTL_Thread_State_Unknown = ''{0}'' |
| CTL_Thread_State_Monitor = ''{0}'' waiting on monitor |
| CTL_Thread_State_Monitor_At = ''{0}'' waiting on monitor at ''{1}'' |
| CTL_Thread_State_NotStarted = ''{0}'' not started yet |
| CTL_Thread_State_Running = ''{0}'' running |
| CTL_Thread_State_Running_At = ''{0}'' running at ''{1}'' |
| CTL_Thread_State_Suspended = ''{0}'' suspended |
| CTL_Thread_State_Suspended_At = ''{0}'' suspended at ''{1}'' |
| CTL_Thread_State_Sleeping = ''{0}'' sleeping |
| CTL_Thread_State_Sleeping_At = ''{0}'' sleeping at ''{1}'' |
| CTL_Thread_State_Waiting = ''{0}'' waiting |
| CTL_Thread_State_Waiting_At = ''{0}'' waiting at ''{1}'' |
| CTL_Thread_State_Zombie = ''{0}'' died |
| CTL_Thread_At_LineBreakpoint = ''{0}'' at line breakpoint {1} : {2} |
| CTL_Thread_At_MethodBreakpoint = ''{0}'' at method breakpoint {1}.{2} |
| CTL_Thread_At_MethodBreakpointSig = ''{0}'' at method breakpoint {1}.{2} {3} |
| CTL_Thread_At_ExceptionBreakpoint = ''{0}'' at exception breakpoint {1} |
| CTL_Thread_At_FieldBreakpoint = ''{0}'' at field breakpoint {1}.{2} |
| CTL_Thread_At_ThreadBreakpoint = ''{0}'' at thread breakpoint |
| CTL_Thread_At_ClassBreakpoint = ''{0}'' at class breakpoint {1} |
| CTL_Thread_At_Breakpoint = ''{0}'' at {1} |
| CTL_Thread_Invoking_Method = ''{0}'' evaluating method... |
| |
| CTL_Frame_Loading=Loading frame description... |
| |
| #VariablesTreeModelFilterSI |
| MSG_VariablesFilter_StaticNode = Statique |
| MSG_VariablesFilter_InheritedNode = H\u00e9rit\u00e9 |
| |
| #VariablesNodeModel |
| CTL_LocalsModel_Column_Name_Desc = Racine des variables locales |
| CTL_LocalsModel_Column_Name_Name = Nom |
| CTL_LocalsModel_Column_Name_SubArray = [{0} - {1}] |
| CTL_LocalsModel_Column_Descr_SubArray = \u00c9l\u00e9ments du tableau de {0} \u00e0 {1}. |
| NoCurrentThreadVar=No variables to display because there is no current thread. |
| CTL_No_Info=Les informations relatives aux variables ne sont pas disponibles\u00a0; la source a \u00e9t\u00e9 compil\u00e9e sans l'option -g. |
| CTL_No_Info_descr=Les informations relatives aux variables ne sont pas disponibles\u00a0; v\u00e9rifiez que le code a \u00e9t\u00e9 compil\u00e9 avec l'option -g. |
| TTP_NewWatch=Ecrire ou coller une nouvelle expression \u00e0 surveiller |
| |
| MSG_VariablesFilter_StaticNode_descr = The static context |
| MSG_VariablesFilter_Class_descr = The current class object |
| MSG_VariablesFilter_Return_descr = The return value of ''{0}'' method. |
| beforeOperation=Before call to ''{0}()'' |
| beforeOperation_descr=The program is suspended right before the call to ''{0}()'' method. |
| afterOperation=After return from ''{0}()'' |
| afterOperation_descr=The program is suspended right after return from ''{0}()'' method. |
| lastOperationsNode = Return values history |
| MSG_LastOperations_descr = The values of sub-expressions stepped over by expression step. |
| operationArgumentsNode = commande de la VM |
| operationArgumentsNode_descr = Arguments that are passed to ''{0}'' method. |
| NativeMethod = No arguments available for native methods |
| NativeMethod_descr = It is not possible to retrieve arguments for native methods. |
| noDebugInfoWarning = Variable information not available, source compiled without -g option |
| noDebugInfoWarning_descr = Variable information not available, source compiled without -g option |
| |
| #VariablesTableModel |
| # When the information is not available |
| MSG_NA=N/D |
| |
| #VariablesActionProvider |
| CTL_GoToSource=Aller \u00e0 la source |
| |
| # Hidden Call Stack Frames Filter |
| LBL_HIDDEN_FRAMES=Appels avec source masqu\u00e9e |
| TLT_HIDDEN_FRAMES=Calls from sources not used for debugging |
| #RES_FRAME_GROUP=org/netbeans/modules/debugger/jpda/resources/CallStackFrameGroup |
| |
| #Evaluator History Filter |
| MSG_EvaluatorHistoryFilterNode=Historique |
| CTL_EvaluatorHistoryNode=Evaluator History Node |
| CTL_EvaluatorHistoryItem=Evaluator History Item |
| CTL_PasteExprFromHistoryToEvaluator=Paste To Evaluator |
| |
| # VariablesFormatterFilter |
| MSG_LoopInTypeFormattingIntroErrorMessage = Loop in variable formatters detected.\nThe variable formatters are applied recursively, applicable formatter is applied to every formatted value. Details of the recursion are below: |
| MSG_LoopInTypeFormatting = Loop in variable formatters of names {0} detected. |
| |