| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| # |
| # Contributor(s): |
| # |
| # Portions Copyrighted 2008 Sun Microsystems, Inc. |
| |
| ActionMappings.cbRecursively.text=&Construir recursivamente (con m\u00f3dulos) |
| ActionMappings.lblProfiles.text=Activar &perfiles: |
| ActionMappings.btnAdd.text=&Agregar personalizaci\u00f3n... |
| ActionMappings.btnAdd.text2=&Agregar... |
| ActionMappings.btnRemove.text=&Quitar/restablecer |
| ActionMappings.btnRemove.text2=&Remover |
| ActionMappings.lblProperties.text=&Establecer propiedades: |
| ActionMappings.lblGoals.text=&Ejecutar objetivos: |
| COM_Build_project= Construir Proyecto |
| COM_Clean_project=Limpiar proyecto |
| COM_Compile_file=Compilar archivo |
| COM_Debug_project=Depurar proyecto |
| COM_Debug_file_main=Depurar el archivo a trav\u00e9s de main() |
| COM_Debug_file_deploy=Depurar el archivo a trav\u00e9s de despliegue |
| COM_Debug_test=Depurar pruebas |
| COM_ReBuild_project=Limpiar y construir proyecto |
| COM_Run_project=Ejecutar proyecto |
| COM_Profile_project=Perfil proyecto |
| COM_Javadoc_project=Generar Javadoc |
| COM_Build_WithDeps_project=Generar con dependencias |
| COM_Run_file_main=Ejecutar archivo a tr\u00e1ves de main() |
| COM_Run_file_deploy=Ejecutar archivo a tr\u00e1ves de desplegar |
| COM_Test_project=Proyecto de prueba |
| COM_Test_file=Archivo de prueba |
| ActionMappings.txtGoals.hint=<html>A space-separated list of goals or phases to execute.</html> |
| ActinMappings.txtProfiles.hint=<html>Una lista de perfiles -separados por espacios o coma,activados durante la ejecuci\u00f3n.</html> |
| ActinMappings.txtProperties.hint=<html>Una lista de propiedades separadas por comas a ser asignadas durante la ejecuci\u00f3n en el formulario <key>=\"<value>\". Si el valor no contiene espacios en blanco, \ "puede omitirse.<br>Variables adicionales compatibles incluyen (\u00fatil principalmente para ejecutar o depuraci\u00f3n/prueba \u00fanico):<ul><li><b> className </b> nombre de la clase seleccionada por ejemplo. String</li><li><b>classNameWithExtension</b> String.java</li><li><b>packageClassName</b> nombre de la clase seleccionada con el nombre del paquete, eg. java.lang.String</li><li><b>webpagePath</b> ruta relativa de la pagina del documento web sin src/main/webapp </li></ul></html> |
| TIT_Action_Mappings=Acciones |
| LBL_GroupId=&Group Id\: |
| LBL_ArtifactId=&Artifact Id\: |
| LBL_Version=&Versi\u00f3n\: |
| LBL_Packaging=&Paquetes\: |
| LBL_Name=&Nombre\: |
| LBL_Description=&Descripci\u00f3n\: |
| TIT_Basic=general |
| LBL_MainClass=&Main Class\: |
| LBL_Arguments=&Argumentos\: |
| LBL_WorkDir=Directorio de Trabajo\: |
| LBL_VMOptions=Opciones &VM\: |
| LBL_VMHint=(por ejemplo, -Xms10m) |
| BTN_Browse=&Examinar... |
| TIT_SelectWorkingDirectory=Seleccione el directorio de Trabajo |
| Err_CannotCreate=No se puede crear el archivo ensamblador en {0} |
| TIT_Run=Ejecutar |
| TIT_ReactorDir=Seleccione el directorio del proyecto reactor |
| BTN_ReactorDir=Seleccionar |
| |
| |
| #MainClassChooser |
| CTL_AvaialableMainClasses=&Main classes\: |
| LBL_ChooseMainClass_OK=Seleccione la clase principal |
| AD_ChooseMainClass_OK=Aceptar |
| LBL_ChooseMainClass_Title=Examinar clases principales |
| LBL_ChooseMainClass_NO_CLASSES_NODE=<no se encontro clase principal> |
| AD_MainClassChooser=No disponible |
| AD_jMainClassList=No disponible |
| LBL_ChooseMainClass_WARMUP_MESSAGE=Inicializando vista, espere ... |
| |
| |
| TIT_Sources=Fuentes |
| CTL_ProjectFolder=Carpeta del proyecto: |
| TXT_SourceLevel=Formato de fuentes/&binarios: |
| TXT_Encoding=&Codificaci\u00f3n: |
| TIT_Add_action=Action Name\: |
| LBL_AddAction=Ingrese el nombre de acci\u00f3n |
| LBL_Actions=Acciones: |
| ActionMappings.lblConfiguration.text=Configuraci\u00f3n: |
| TIT_Project_Properties=Propiedades del proyecto - {0} |
| ActionMappings.btnAddProps.text=Agregar > |
| ActionMappings.debugMaven=Depurar construcci\u00f3n de Maven |
| ActionMappings.envVar=Nueva variable de entorno |
| ActionMappings.globalVar=Referencia a la variable global del IDE |
| ActionMappings.skipTests=Saltear las pruebas |
| CompilePanel.lblCompileOnSave.text=Compilar y guardar: |
| CompilePanel.lblHint1.text=Si selecciona, archivos se compilan al guardarlos. |
| CompilePanel.lblHint2.text=Esta opci\u00f3n guarda su tiempo al ejecutar o depurar la aplicaci\u00f3n o pruebas en el IDE. |
| |
| TIT_Compile=Compilar |
| customizer.Build=Generar |
| COS_ALL=Para ambos aplicaci\u00f3n y prueba de ejecuci\u00f3n |
| COS_APP=Para la ejecuci\u00f3n de aplicaci\u00f3n s\u00f3lamente |
| COS_TESTS=S\u00f3lo para la ejecuci\u00f3n de prueba |
| COS_NONE=Desactivar |
| CompilePanel.cbDebug.text=&Generar informaci\u00f3n de depuraci\u00f3n |
| CompilePanel.cbDeprecate.text=Informe de usos de los APIs &Obsoletos |
| CompilePanel.lblJavaPlatform.text=Plataforma Java: |
| CompilePanel.btnMngPlatform.text=&Administrar Plataformas Java... |
| AddPropertyDialog.lblPropertyExpressions.text=Las expresiones de la propiedad: |
| AN_SourceLevel=Cuadro combinado de nivel de origen |
| SourcesPanel.lblSrc.text=&Carpeta de origen: |
| SourcesPanel.lblTestSrc.text=&Prueba de la carpeta de origen: |
| SourcesPanel.lblGenerated.text=<html><h3>Please Note:</h3>\nAny source roots generated by Maven plugins will be generated \ninto the ${basedir}/target/generated-sources/FOOBAR folder, where FOOBAR is typically the name of the plugin. \nLa mayor\u00eda de plugins de Maven se adhiere a la convenci\u00f3n de estructura de la carpeta mencionadas de forma predeterminada. Si no esta el plugin, configurelo y las fuentes generadas seran reconocidas por el IDE.\n |
| ActionMappings.cbBuildWithDeps.text=Construir con dependencias |
| WarnPanel.cbNextTime.text=Mostrar la advertencia la pr\u00f3xima vez |
| WarnPanel.lblText.text=jLabel1 |
| HINT_Build_WithDependencies=<html><h2>Please note:</h2>Build with Dependencies delegates to the action of the same name and performs it before the current action is performed.<p> The Build with Dependencies action relies on Maven's --project-list and --also-make switches to perform its duties. |
| BTN_OK=Aceptar |
| SourcesPanel.txtProjectFolder.AccessibleContext.accessibleDescription=Carpeta del proyecto |
| SourcesPanel.txtSrc.AccessibleContext.accessibleDescription=Carpeta de origen |
| SourcesPanel.txtTestSrc.AccessibleContext.accessibleDescription=Carpeta de origen de la prueba |
| SourcesPanel.comSourceLevel.AccessibleContext.accessibleDescription=Nivel de origen |
| SourcesPanel.comEncoding.AccessibleContext.accessibleDescription=Codificaci\u00f3n |
| CompilePanel.btnMngPlatform.AccessibleContext.accessibleDescription=Administrar plataforma Java |
| BTN_Browse_Main=&Examinar... |
| BTN_Browse_WorkingDir=&Examinar... |
| ActionMappings.btnAddProps.AccessibleContext.accessibleDescription=Agregar propiedad |
| ActionMappings.btnAdd.AccessibleContext.accessibleDescription=Agregar acci\u00f3n personalizada |
| ActionMappings.btnRemove.AccessibleContext.accessibleDescription=Remover/reestablece acci\u00f3n |
| ActionMappings.cbBuildWithDeps.AccessibleContext.accessibleDescription=Generar con dependencias |
| ActionMappings.comConfiguration.AccessibleContext.accessibleDescription=Configuraci\u00f3n |
| ActionMappings.lstMappings.AccessibleContext.accessibleDescription=Acciones |
| ActionMappings.taProperties.AccessibleContext.accessibleDescription=Propiedades |
| ActionMappings.txtGoals.AccessibleContext.accessibleDescription=Ejecutar metas |
| ActionMappings.txtProfiles.AccessibleContext.accessibleDescription=Activar Perfiles |
| ActionMappings.txtDirectory.AccessibleContext.accessibleDescription=ra\u00edz Reactor |
| ActionMappings.btnDirectory.AccessibleContext.accessibleDescription=Seleccione la carpeta ra\u00edz de reactor... |
| WarnPanel.cbNextTime.AccessibleContext.accessibleDescription=Seleccionar para ver esta advertencia de nuevo la pr\u00f3xima vez |
| WarnPanel.AccessibleContext.accessibleDescription=Di\u00e1logo de mensaje de advertencia |
| |
| TXT_Problem_Broken_Actions=Archivo de nbactions.xml roto. |
| DESC_Problem_Broken_Actions=No se puede procesar el archivo $project_basedir/nbactions.xml La informaci\u00f3n contenida en el archivo se omitir\u00e1n hasta que se fija. Esto afecta a varias caracter\u00edsticas en el IDE que no funciona correctamente como resultado\n Convirtiendo excepci\u00f3n:\n{0} |
| TXT_OPEN_FILE=Abrir archivo |
| |
| ERR_Coord_breaks_pom=Error: ID de grupo o ID Artifact invalidar\u00eda archivo xml de Maven POM. |
| ERR_multibyte=Error: multibyte caracteres prohibido en el ID de grupo y el ID de Artifact. |
| TXT_PLUGIN_EXPRESSION=Propiedad de expresi\u00f3n de extensi\u00f3n |
| TIT_PLUGIN_EXPRESSION=Agregar una propiedad de expresi\u00f3n de extensi\u00f3n |
| |
| HINT_ApplicationCoS=<html>Las clases compiladas con la caracter\u00edstica Compilar y Guardar en el IDE no son id\u00e9nticas a las clases compiladas con javac del JDK <br>Cuando construya sus <b>binarios para redistribuci\u00f3n</br>, aseg\u00farese de siempre realizar una <b>construcci\u00f3n limpia</b>.</html>. |
| ERR_MissingPOM=El archivo pom.xml del proyecto tiene contenido xml que no es v\u00e1lido. Corrija el archivo antes de proceder. |
| RunJarPanel.lblConfiguration.text=&Configuraci\u00f3n: |
| |