| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| TOOLTIP_HelpBar=La Barra de ayuda muestra indicaciones seg\u00fan el contexto para el dise\u00f1o de interfaces gr\u00e1ficas. |
| |
| # General messages shown in select mode |
| select_1=Utilice el bot\u00f3n Fuente (en la barra de herramientas) para cambiar al c\u00f3digo fuente. |
| select_2=Utilice el bot\u00f3n de Modo de conexi\u00f3n (en la barra de herramientas) para establecer una conexi\u00f3n entre componentes. |
| select_3=El bot\u00f3n Dise\u00f1o previo (en la barra de herramientas) permite probar el dise\u00f1o del formulario. |
| select_4=La opci\u00f3n Herramientas>Paleta>Componentes Swing/Awt permite modificar el contenido de la Paleta. |
| select_5=Utilice la ventana Paleta para a\u00f1adir un componente al dise\u00f1ador. |
| select_6=La ventana Inspector muestra el \u00e1rbol de componentes del formulario abierto. |
| select_7=La ventana Propiedades muestra la configuraci\u00f3n modificable de los componentes seleccionados. |
| |
| # Connect mode messages |
| connectSource=Seleccionar el componente que generar\u00e1 el evento. |
| connectTarget=Seleccionar el componente que recibir\u00e1 el evento. |
| connectWizard=Indicar los detalles de la conexi\u00f3n. |
| |
| # Moving/resizing messages |
| alignHorizontalLeading=Alinear con el lado izquierdo de otro componente. |
| alignHorizontalTrailing=Alinear con el lado derecho de otro componente. |
| alignVerticalLeading=Alinear con la parte superior de otro componente. |
| alignVerticalTrailing=Alinear con la parte inferior de otro componente. |
| alignVerticalBaseline=Alinear con la l\u00ednea inferior con otro componente. |
| nextToContainerHorizontalLeading=Alejarse con la separaci\u00f3n elegida del borde izquierdo del contenedor. |
| nextToContainerHorizontalTrailing=Alejarse con la separaci\u00f3n elegida del borde derecho del contenedor. |
| nextToContainerVerticalLeading=Alejarse con la separaci\u00f3n elegida del borde superior del contenedor. |
| nextToContainerVerticalTrailing=Alejarse con la separaci\u00f3n elegida de la parte inferior del contenedor. |
| nextToRelatedHorizontalLeading=Alejarse con la separaci\u00f3n peque\u00f1a elegida de un componente a la izquierda. |
| nextToUnrelatedHorizontalLeading=Alejarse con la separaci\u00f3n media elegida de un componente a la izquierda |
| nextToSeparateHorizontalLeading=Alejarse con la separaci\u00f3n grande elegida de un componente a la izquierda. |
| nextToRelatedHorizontalTrailing=Alejarse con la separaci\u00f3n peque\u00f1a elegida de un componente a la derecha. |
| nextToUnrelatedHorizontalTrailing=Alejarse con la separaci\u00f3n media preferida de un componente a la derecha. |
| nextToSeparateHorizontalTrailing=Alejarse con la separaci\u00f3n grande elegida de un componente a la derecha. |
| nextToRelatedVerticalLeading=Alejarse con la separaci\u00f3n peque\u00f1a elegida de un componente que est\u00e1 m\u00e1s arriba. |
| nextToUnrelatedVerticalLeading=Alejarse con la separaci\u00f3n media elegida de un componente que est\u00e1 m\u00e1s arriba. |
| nextToSeparateVerticalLeading=Alejarse con la separaci\u00f3n grande elegida de un componente que est\u00e1 m\u00e1s arriba. |
| nextToRelatedVerticalTrailing=Alejarse con la separaci\u00f3n peque\u00f1a elegida de un componente que est\u00e1 m\u00e1s abajo. |
| nextToUnrelatedVerticalTrailing=Alejarse con la separaci\u00f3n media elegida de un componente que est\u00e1 m\u00e1s abajo. |
| nextToSeparateVerticalTrailing=Alejarse con la separaci\u00f3n grande elegida de un componente que est\u00e1 m\u00e1s abajo. |
| indent=Sangrar el componente |
| generalPosition=Mover el componente hacia el interior de su posici\u00f3n. |
| generalResizing=Redimensionar el componente. |
| snappedToDefaultHorizontal=Establecer el ancho predeterminado del componente |
| snappedToDefaultVertical=Establecer la altura predeterminada del componente. |
| unplacedComponent1=Componente copiado o insertado - no se ha ubicado en el dise\u00f1o todav\u00eda. |
| unplacedComponent2=Mueva el componente con el rat\u00f3n para ubicarlo. |
| unplacedComponents1=Componentes copiados o insertados - no se han ubicado en el dise\u00f1o todav\u00eda |
| unplacedComponents2=Mueva los componentes con el rat\u00f3n para ubicarlos. |
| |
| # Layout managers |
| absoluteLayout=Colocar el componente en [{0}, {1}]. |
| borderLayout=Colocar el componente dentro del \u00e1rea {0}. |
| boxLayout=Colocar el componente en la posici\u00f3n {0}. |
| flowLayout=Colocar el componente en la posici\u00f3n {0}. |
| gridLayout=Colocar el componente en la posici\u00f3n {0}. |
| toolbarLayout=Colocar el componente en la posici\u00f3n {0}. |
| splitPaneLayout=Colocar el componente dentro del \u00e1rea {0}. |
| jscrollPaneLayout=A\u00f1adir el componente al JScrollPane. |
| scrollPaneLayout=A\u00f1adir el componente al ScrollPane. |
| tabbedPaneLayout=A\u00f1adir el componente como una pesta\u00f1a al JTabbedPane. |
| cardLayout=A\u00f1adir el componente como una tarjeta al CardLayout. |
| |
| # Selection |
| tabbedPaneEmpty=A\u00f1adir un contenedor o un componente para crear una pesta\u00f1a. |
| tabbedPaneOne=A\u00f1adir el segundo componente/contenedor para crear la segunda pesta\u00f1a. |
| tabbedPane_1=Pulse dos veces sobre la pesta\u00f1a para cambiar su texto. |
| tabbedPane_2=Se pueden reordenar las pesta\u00f1as utilizando arrastrar y soltar en el Inspector. |
| buttonGroup=Utilice el componente ButtonGroup y la propiedad buttonGroup para crear un grupo de JRadioButtons excluyentes. |
| designThisContainer=Utilice la acci\u00f3n Dise\u00f1ar este contenedor del men\u00fa contextual para llevar el foco a este contenedor. |
| comboBoxModel=Utilice la propiedad model para modificar el contenido del JComboBox. |
| listModel=Utilice la propiedad model para modificar el contenido del JList. |
| tableModel=Utilice la propiedad model para modificar el contenido del JTable. |
| scrollPaneEmpty=A\u00f1adir un componente que funcionar\u00e1 como la vista del panel de desplazamiento. |
| scrollPane=Pulse sobrre el panel de desplazamiento otra vez para seleccionar su vista. |
| |
| # Other |
| missingMenubar=No se puede agregar un componente de men\u00fa a un formulario sin barra de menues. |
| |