| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| LBL_Customizer_Ok_Option=Aceptar |
| LBL_Customizer_Cancel_Option=Cancelar |
| LBL_Customizer_Title=Propiedades del proyecto - {0} |
| |
| # BasicProjectInfoPanel |
| LBL_Browse_Location=Examinar la carpeta existente del proyecto de Ant |
| LBL_Browse_Build_Script=Examinar la secuencia de \u00f3rdenes existente de generaci\u00f3n de Ant |
| LBL_Browse_Project_Folder=Examinar carpeta de proyecto nuevo |
| LBL_BasicProjectInfoPanel_jLabel1=Seleccione la carpeta que contenga los archivos del proyecto y especifique la ubicaci\u00f3n de la secuencia de \u00f3rdenes de generaci\u00f3n. |
| ACSD_BasicProjectInfoPanel_jLabel1=No disponible |
| LBL_BasicProjectInfoPanel_jLabel6=&Ubicacion\: |
| ACSD_BasicProjectInfoPanel_jLabel6=No disponible |
| ACSD_BasicProjectInfoPanel_jLabel2=No disponible |
| LBL_BasicProjectInfoPanel_jLabel2=Construir &Script\: |
| LBL_BasicProjectInfoPanel_jLabel3=Especifique un nombre y una ubicaci\u00f3n para el proyecto nuevo. |
| ACSD_BasicProjectInfoPanel_jLabel3=No disponible |
| ACSD_BasicProjectInfoPanel_jLabel4=No disponible |
| ACSD_BasicProjectInfoPanel_jLabel5=No disponible |
| ACSD_BasicProjectInfoPanel_mainProject=No disponible |
| LBL_BasicProjectInfoPanel_mainProject=Configurar como proyecto &principal |
| LBL_BasicProjectInfoPanel_jLabel5=Carpeta de &Proyecto\: |
| LBL_BasicProjectInfoPanel_jLabel4=&Nombre de proyecto\: |
| BTN_BasicProjectInfoPanel_browseProjectLocation=&Examinar... |
| ACSD_BasicProjectInfoPanel_browseProjectLocation=Abre un selector de archivos que permite acceder a la carpeta que contiene el proyecto existente, basado en Ant. |
| BTN_BasicProjectInfoPanel_browseAntScript=&Examinar... |
| ACSD_BasicProjectInfoPanel_browseAntScript=Abre un selector de archivos que permite examinar una secuencia de \u00f3rdenes de generaci\u00f3n de Ant existente. |
| BTN_BasicProjectInfoPanel_browseProjectFolder=&Examinar... |
| ACSD_BasicProjectInfoPanel_browseProjectFolder=Abre un selector de archivos que permite acceder a la ubicaci\u00f3n de la carpeta del proyecto. |
| LBL_BasicProjectInfoPanel_Error_1=Debe especificar la ubicaci\u00f3n de los archivos del proyecto. |
| LBL_BasicProjectInfoPanel_Error_2=La ubicaci\u00f3n del proyecto no existe. |
| LBL_BasicProjectInfoPanel_Error_3=Debe especificar una secuencia de \u00f3rdenes de generaci\u00f3n existente. |
| LBL_BasicProjectInfoPanel_Error_4=La secuencia de comandos de generaci\u00f3n especificada no existe. |
| LBL_BasicProjectInfoPanel_Error_5=El archivo seleccionado no es una secuencia de \u00f3rdenes de Ant v\u00e1lida. |
| LBL_BasicProjectInfoPanel_Error_6=Debe establecerse el nombre de proyecto. |
| LBL_BasicProjectInfoPanel_Error_7=Debe establecerse la carpeta de proyecto. |
| LBL_BasicProjectInfoPanel_Error_8=La carpeta de proyecto seleccionada es ya un proyecto de NetBeans. |
| LBL_BasicProjectInfoPanel_Error_9=El proyecto {0} de NetBeans ya est\u00e1 usando esta carpeta de proyecto. |
| LBL_BasicProjectInfoPanel_Error_10=El proyecto de NetBeans {0} ya est\u00e1 usando esta ubicaci\u00f3n de proyecto. |
| |
| LBL_GeneralPanel_jLabel1=Carpeta de Proyecto\: |
| ACSD_GeneralPanel_jLabel1=Carpeta de proyecto muestra la ubicaci\u00f3n de la carpeta del proyecto. |
| |
| LBL_TargetMappingPanel_jLabel1=Especifique los destinos de Ant ejecutados por elementos de men\u00fa comunes. |
| ACSD_TargetMappingPanel_jLabel1=No disponible |
| LBL_TargetMappingPanel_jLabel2=Construir Proyecto\: |
| LBL_TargetMappingPanel_jLabel4=Limpiar Proyecto\: |
| LBL_TargetMappingPanel_jLabel6=Generar Javadoc\: |
| LBL_TargetMappingPanel_jLabel5=Ejecutar Proyecto\: |
| LBL_TargetMappingPanel_jLabel7=Probar Proyecto\: |
| LBL_TargetMappingPanel_jLabel10=Asociaci\u00f3n de \u00edtems de &Men\u00fa contextual personalizados: |
| BTN_TargetMappingPanel_add=&Agregar |
| BTN_TargetMappingPanel_remove=&Eliminar |
| ACSD_TargetMappingPanel_jLabel2=No disponible |
| ACSD_TargetMappingPanel_jLabel4=No disponible |
| ACSD_TargetMappingPanel_jLabel6=No disponible |
| ACSD_TargetMappingPanel_jLabel5=No disponible |
| ACSD_TargetMappingPanel_jLabel7=No disponible |
| ACSD_TargetMappingPanel_jLabel9=No disponible |
| ACSD_TargetMappingPanel_jLabel3=No disponible |
| ACSD_TargetMappingPanel_jLabel8=No disponible |
| ACSD_TargetMappingPanel_jLabel10=En el men\u00fa contextual del nodo del proyecto hay disponible una tabla con los destinos de generaci\u00f3n personalizados. |
| ACSD_TargetMappingPanel_add=Agrega un destino de generaci\u00f3n personalizado nuevo a la tabla Elementos de men\u00fa personalizados. |
| ACSD_TargetMappingPanel_remove=Elimina el destino personalizado seleccionado de la tabla Elementos de men\u00fa personalizados. |
| LBL_TargetMappingPanel_Target=Destino de Ant |
| LBL_TargetMappingPanel_Label=Etiqueta |
| |
| ACSD_BasicProjectInfoWizardPanel=No disponible |
| ACSD_TargetMappingWizardPanel=No disponible |
| |
| ACSN_ProjectCustomizer=No disponible |
| ACSD_ProjectCustomizer=No disponible |
| ACSN_ProjectCustomizer_customizerPanel=No disponible |
| ACSD_ProjectCustomizer_customizerPanel=No disponible |
| ACSN_ProjectCustomizer_categoryPanel=No disponible |
| ACSD_ProjectCustomizer_categoryPanel=No disponible |
| LBL_ProjectCustomizer_Category_General=general |
| LBL_ProjectCustomizer_Category_Targets=Generar y ejecutar |
| |
| ACSD_Customizer_Cancel_Option=No disponible |
| ACSD_Customizer_Ok_Option=No disponible |
| |
| #BasicProjectInfoPanel |
| WizardPanel_NameAndLocation=Nombre y ubicaci\u00f3n |
| WizardPanel_BuildAndRunActions=Generar y ejecutar acciones |
| |
| LBL_Customizer_Categories=Categor\u00edas\: |
| |
| # UnboundTargetAlert |
| # {0} - action name |
| UTA_LBL_intro=No hay ning\u00fan destino de generaci\u00f3n asociado a la acci\u00f3n {0}. |
| # {0} - action name |
| UTA_LBL_select={0}: |
| # {0} - action name |
| UTA_TEXT_explanation=El proyecto con formato libre necesita un destino que represente la acci\u00f3n {0} que se invoque en la secuencia de \u00f3rdenes de Ant. Seleccione el destino que se va a invocar. |
| # {0} - action name |
| # {1} - project display name |
| UTA_TITLE={0} - {1} |
| GeneralInformationPanel.panelLabel.text=Informaci\u00f3n general del proyecto |
| GeneralInformationPanel.contentsFolderLabel.text=Carpeta de Contenidos: |
| GeneralInformationPanel.projectFolderLabel.text=Carpeta de proyecto: |
| GeneralInformationPanel.buildScriptLabel.text=&Secuencia de \u00f3rdenes de generaci\u00f3n: |
| Freeform_Warning_Message=El tipo de proyecto con formato libre utiliza una secuencia de \u00f3rdenes de Ant existente para ejecutar todas las acciones del proyecto, como Limpiar, Generar y Ejecutar. Es necesario editar manualmente la secuencia de \u00f3rdenes de Ant para cambiar el proceso de Generaci\u00f3n. Considere utilizar la plantilla "Proyecto con Fuentes Existentes" para un mantenimiento m\u00e1s f\u00e1cil del proyecto a largo plazo. |
| LBL_Mapping_Of_General_Actions=Asociaci\u00f3n de las Acciones Generales del Proyecto a destinos en una secuencia de \u00f3rdenes de ejecuci\u00f3n para generaci\u00f3n personalizada. |
| ACSN_Freeform_Warning_Message=El tipo de proyecto con formato libre utiliza una secuencia de \u00f3rdenes de Ant existente para ejecutar todas las acciones del proyecto, como Limpiar, Generar y Ejecutar. Es necesario editar manualmente la secuencia de \u00f3rdenes de Ant para cambiar el proceso de Generaci\u00f3n. Considere utilizar la plantilla "Proyecto con Fuentes Existentes" para un mantenimiento m\u00e1s f\u00e1cil del proyecto a largo plazo. |
| ACSD_Freeform_Warning_Message=Advierte sobre la necesidad de editar manualmente la secuencia de \u00f3rdenes de Ant para cambiar el proceso de generaci\u00f3n. |
| ASCN_UTA_TEXT_explanation=El proyecto con formato libre necesita un destino que represente la acci\u00f3n {0} que se invoque en la secuencia de \u00f3rdenes de Ant. Seleccione el destino que se va a invocar. |
| ASCD_UTA_TEXT_explanation=Necesario para asociar acci\u00f3n {0} con un destino ant. |
| |
| # {0} - project directory |
| View.RootNode.shortDescription=Proyecto de formato libre en {0} |
| |