| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| |
| |
| # manifest |
| OpenIDE-Module-Name=API de sistema de fitxers |
| OpenIDE-Module-Display-Category=Infraestructura |
| OpenIDE-Module-Short-Description=API de sistemes de fitxers virtuals (Virtual File System - VFS). |
| OpenIDE-Module-Long-Description=Permet acc\u00e9s al fitxer d'una forma similar al sistema operatiu, per\u00f2 d'una forma independent. Suporta notificacions i canvis al disc. |
| |
| |
| |
| # {0} = system name of the filesystem |
| LAB_FileSystemInvalid=No v\u00e0lid {0} |
| # {0} = system name of the filesystem |
| LAB_FileSystemValid={0} |
| # {0} = name of the file |
| # LAB_FileInvalid={0} |
| |
| # {0} = file to the root |
| EXC_RootNotExist=L''arrel {0} no existeix. |
| |
| # {0} - filesystem |
| EXC_CannotDeleteRoot=No es pot eliminar l''arrel del sistema de fitxers {0}. |
| |
| # {0} = name of FS |
| EXC_CannotRenameRoot=No es pot canviar el nom de l''arrel del sistema de fitxers {0}. |
| |
| |
| # {0} - folder that cannot be deleted |
| # {1} - filesystem |
| EXC_CannotDelete=No es pot eliminar el fitxer {0} a {1}. |
| |
| # {0} - folder that cannot be deleted |
| # {1} - filesystem |
| # {2} - one file that is in the folder |
| # EXC_CannotDeleteNotEmpty=Cannot delete folder {0} in {1}. Folder is not empty (file {2} exists in the folder). |
| |
| |
| # {0} = original name of the file |
| # {1} = name of FS |
| # EXC_BadName=File {0} in {1} cannot be renamed to name without extension. |
| |
| # {0} = original name of the file |
| # {1} = name of FS |
| # {2} = new name of the file (with extension) |
| # {3} = does the new file exists |
| # {4} = result of rename |
| EXC_CannotRename=No es pot canviar el nom del fitxer {0} de {1} a {2}. El nou fitxer existeix: {3}. Resultat canvi de nom: {4}. |
| |
| # {0} = display name of the filesystem |
| EXC_FSisRO=El sistema de fitxers {0} \u00e9s de nom\u00e9s-lectura. |
| |
| # {0} = name of the file |
| # {1} = filesystem |
| EXC_FisRO=El fitxer {0} a {1} \u00e9s de nom\u00e9s-lectura. |
| |
| # {0} = name of the file |
| # {1} = name of "not folder" |
| # {2} = filesystem |
| EXC_FoNotFolder=No es pot crear el fitxer {0} perqu\u00e8 {1} al sistema de fitxers {2} no \u00e9s una carpeta. |
| |
| # {0} = name of the folder |
| EXC_SlashNotAllowed=La barra al nom de la carpeta "{0}" no est\u00e0 perm\u00e8s. |
| |
| # {0} = name of file to create |
| # {1} = filesystem |
| # {2} = full system name of the file |
| EXC_FolderAlreadyExist=La carpeta {0} ja existeix a {1} ({2}). |
| |
| # {0} = name of file to create |
| # {1} = filesystem |
| # {2} = full system name of the file |
| EXC_CannotCreateF=No es pot crear la carpeta {0} a {1} ({2}). |
| |
| # {0} = name of the file to create folder in |
| # {1} = name of the filesystem |
| # {2} = name of the file to create |
| # {3} = extension of the file to create |
| # EXC_CannotCreateFinData=Cannot create {2}.{3} in file {0} on filesystem {1}. |
| |
| # {0} = name of file to create |
| # {1} = filesystem |
| # {2} = full system name of the file |
| EXC_DataAlreadyExist=El fitxer {0} ja existeix al sistema de fitxers {1} ({2}). |
| |
| # {0} = name of the folder to create in |
| # {1} = filesystem |
| # {2} = name of the file to create |
| # {3} = extension of the file to create |
| EXC_CannotCreateD=No es pot crear el fitxer {2}.{3} en la carpeta {0} del sistema de fitxers {1}. |
| |
| # {0} = instance of tested lock |
| # {1} = name of the file |
| # {2} = filesystem |
| # {3} = instance of current lock |
| EXC_InvalidLock=Bloqueig no v\u00e0lid [{0}] pel fitxer {1} a {2} amb el bloqueig actual [{3}]. |
| |
| # When getOutputStream ().close () is called and we cannot delete the original file |
| # {0} name of file that we cannot delete |
| # EXC_CannotDeleteOriginal=Cannot delete old version of file {0}. |
| |
| # When getOutputStream ().close () is called and we cannot rename the temporary file to the original one |
| # {0} name of file we rename from |
| # {1} name of file we rename to |
| # EXC_CannotRenameFromTo=Cannot rename new file {0} to {1}. |
| |
| #FileAttributes locale |
| EXC_Cannot_modify=no es pot modificar el fitxer filesystem.attributes: |
| |
| |
| # Application error |
| # {0} = folder name |
| # {1} = name of file |
| EXC_ApplicationCreateError=No es pot trobar el fitxer {1} a la carpeta {0}. |
| |
| |
| # {0} - unused |
| # {1} - unused |
| # {2} - file path |
| EXC_CannotLock={2} nom\u00e9s \u00e9s de lectura. |
| |
| # JAR |
| |
| # {0} - entry path |
| # {1} - ZIP file path |
| EXC_CannotLock_JAR={0} nom\u00e9s \u00e9s de lectura ja que est\u00e0 dins de {1}. |
| |
| # {0} = name of zip file |
| EXC_FileNotExists=Ja existeix el fitxer {0}. |
| |
| # {0} = name of zip file |
| EXC_CanntRead=No es pot llegir del fitxer {0}. |
| |
| # {0} = name of zip file |
| EXC_NotValidFile=Error al fitxer {0}. |
| |
| # {0} - exception text |
| # {1} - name of zip file |
| EXC_NotValidJarFile2=Error al fitxer JAR {1}: {0} |
| |
| #JAR_NotValidJarFileSystem=Invalid JAR. |
| JAR_UnknownJar=JAR desconegut |
| #JAR_JarFileSystem=Jar FS |
| #JAR_FileName=File name |
| CTL_MultiFileSystem=Diversos sistemes de fitxers |
| EXC_FileOutsideModified=Fitxer {0} no trobat. Un altra aplicaci\u00f3 pot haver mogut el fitxer o canviat el nom. |
| XML_NotValidXMLFileSystem=XML FileSystem no v\u00e0lid. |
| EXC_DefAttrReadErr=No es pot llegir DefaultAttributes. |
| EXC_UnreachableCode=Error intern: codi fora de l'abast. |
| |
| EXC_FolderCopy=No est\u00e0 suportat copiar als directoris, |
| XML_RootInvalid=L'element FileSystem ha de ser l'element arrel. |
| XML_MisssingAttr=Falta l'atribut \"nom\" |
| XML_InaccurateParam=N\u00famero de par\u00e0metres inexacte. |
| XML_UnknownElement=Element desconegut. |
| XML_DuplElement=FileObject duplicat: |
| |
| # FileUtil |
| # {0} - relative file path |
| # {1} - filesystem display name |
| LBL_file_in_filesystem={0} a {1} |
| |
| # Logging |
| MSG_CACHED_INPUT_STREAM=Obrint flux per {0} |
| |