| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2009 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| SUN_MICROSYSTEMS=Sun Microsystems |
| JAVACARD_INSTALLATION=Plataforma Java Card |
| UNKNOWN_VENDOR=[Unknown Vendor] |
| PlatformPanel.displayNameLabel.text=Nom a mostrar |
| PlatformPanel.versionLabel.text=Informaci\u00f3 de les versions |
| PlatformPanel.displayNameField.text=Java Card 3.0 Platform |
| PlatformPanel.displayNameField.toolTipText=Enter the display name you will see in projects that use this platform instance |
| PlatformPanel.problemLbl.text=jLabel1 |
| PlatformPanel.jLabel1.text=Localitzaci\u00f3 |
| PlatformPanel.locationField.text= |
| MSG_EXECUTION_FAILED=Emulator execution failed:\n{0} |
| MSG_UNKNOWN_ERROR=Unknown error |
| MSG_VALIDATING=Validating platform |
| MSG_DETECT_PLATFORM=Validate Platform |
| MSG_NO_SLASHES=Platform name may not contain the characters /, \\, ; or : |
| MSG_LOADING=Loading platform info |
| ERR_DOES_NOT_EXIST={0} does not exist |
| ERR_NOT_A_FILE={0} is not a regular file |
| MSG_NO_NAME=Display name empty |
| MSG_BAD_PLATFORM=Invalid platform {0} |
| MSG_NO_EMULATOR=Could not find emulator executable ''{0}'' |
| |
| ERR_SERVER_EXISTS=A device named ''{0}'' exists |
| ERR_PORT_NOT_SPECIFIED=Http port not specified |
| ERR_PORT_NOT_NUMBER={0} is not a number |
| ERR_PORT_NEGATIVE=Port number must be a positive number |
| ERR_PORT_TOO_HIGH=Port number must be less than 65536 |
| ERR_SERVER_URL_INVALID={0} is not a valid device URL |
| ERR_CARD_MGR_URL_INVALID={0} is not a valid card manager URL |
| |
| ERR_PORT_IN_USE=Another device is using port {0}. Please choose different port. |
| ERR_CONTACTED_PORT_NOT_SPECIFIED=Contacted port not specified |
| ERR_CONTACTLESS_PORT_NOT_SPECIFIED=Contactless port not specified |
| ERR_MUST_BE_CONTACTED_OR_CONTACTLESS=One of the Contacted or Contactless ports must be set |
| |
| ERR_DEBUG_PROXY_PORT_NOT_SPECIFIED=Debug proxy port not specified |
| ERR_IDE_PROXY_PORT_NOT_SPECIFIED=IDE debug proxy port not specified |
| secured=secured |
| #debug=debug |
| Run_In_Secure_Mode=Run In Secure Mode |
| tip_bypass_security=Deselct this if you want to bypass some security checks. To be used to quickly test an application without any security checks. |
| debuglevel=Debug level for this instance. |
| tip_sizeofclear=Size of Clear On Reset memory. This is a portion of RAM, used to store Transient Objects that will get cleared (set to default values) after card reset. |
| tip_persistent_memory=Persistent memory size for this instance. |
| tip_ramsize=RAM size for this Instance. |
| tip_persistent_memory_size=Persistent memory size for this instance. |
| tip_clear_on_reset=Size of Clear On Reset memory. This is a portion of RAM, used to store Transient Objects that will get cleared (set to default values) after card reset. |
| tip_debug_level=Debug level for this instance. |
| tip_http_port=Port on which this instance of the device will be listening for HTTP requests. |
| tip_http_port_2=Port on which this instance of the device will be listening. |
| tip_debug_port=Debugger connection port |
| tip_ide_port=Port for communication with the IDE |
| tip_apdu_port=<html>APDU Contacted port. It depends on RI implementation <br>whether this port can be used or not. The default RI supports <br>Contacted Interface only. |
| tip_APDU_Contactless_port=<html>APDU Contactless port. It depends on RI implementation whether this <br>port can be used or not. The default RI supports <br>Contacted Interface only. |
| tip_ide_debug_proxy_port=Port for communicating with the IDE when debugging |
| tip_ide_debug_port=Port for communicating with the IDE when debugging |
| |
| MSG_NO_CUSTOMIZER=This platform has no customizer |
| ServersPanel.jButton1.text=Afegir... |
| ServersPanel.jButton2.text=Treure |
| ServersPanel.jLabel1.text=<html> |
| ServersPanel.jLabel2.text=No Customizer Available |
| |
| FILENAME_DEFAULT_DEVICE=Default Device |
| TTL_SERVERS=Cards and Devices for {0} |
| |
| MSG_NEW_SERVER=Enter a name (/,\\,; and : characters not allowed) |
| TEMPLATE_DEFAULT_DEVICE_NAME=Default Device |
| TTL_NEW_SERVER=New Device |
| |
| PROGRESS_CREATING_PLATFORM=Creating Platform... |
| MSG_UNKNOWN_VENDOR=Unknown Vendor |
| MSG_PLATFORM_EXISTS=A platform with this name already exists |
| ERR_MISSING_REQUIRED_PROPERTIES=Missing required properties {1} in {0} |
| COMMA=, |
| NewDevicePanel.jLabel1.text=Nom a mostrar |
| ERR_EMPTY_NAME=Device name not set |
| ERR_ILLEGAL_CHARS=Illegal characters in device name |
| ERR_DEVICE_EXISTS=A device named ''{0}'' already exists |
| ERR_SAME_PORT_USED_TWICE=Same port number used for more than one value |
| |
| |
| #Validator component names |
| HTTP\ Port=Port HTTP |
| Contacted\ Port=Contacted Port |
| Contactless\ Port=Contactless Port |
| IDE\ Debug\ Port=IDE Debug Port |
| Debug\ CJCRE\ Port=Debuger to Emulator Port |
| Server\ URL=Server URL |
| Card\ Manager\ URL=Card Manager URL |
| ERR_PORT_USED_TWICE={0} used for more than one port |
| NewDevicePanel.displayNameField.text=New Device |
| ERR_BAD_NAME=Illegal characters in name ''{0}'' |
| MSG_SERVER_PORT_PROBLEM=Http Port, Card Manager URL and Server URL do not have the same port |
| T\=0=<html>Byte-Oriented <font color=''!controlShadow''>({0}) |
| T\=1=<html>Block-Oriented <font color=''!controlShadow''>({0}) |
| #none=<html>None <font color=''!controlShadow''>({0}) |
| #fatal=<html>Fatal <font color=''!controlShadow''>({0}) |
| #error=<html>Error <font color=''!controlShadow''>({0}) |
| #warn=<html>Warnings <font color=''!controlShadow''>({0}) |
| #info=<html>Info <font color=''!controlShadow''>({0}) |
| #verbose=<html>Verbose <font color=''!controlShadow''>({0}) |
| #debug=<html>Debug <font color=''!controlShadow''>({0}) |
| #all=<html>All <font color=''!controlShadow''>({0}) |
| STEP_TITLE_VALIDATE_PLATFORM=Validate Platform |
| STEP_TITLE_DEFINE_DEVICE=Define Default Device |
| WARN_REMOTE_LOCAL_MISMATCH=Remote checkbox checked, but URL suggests host is this computer |
| ERR_TOO_OLD=Spec version is {0}. Minimum supported Java Card version is {1}. |
| tip_ide_port_1=<html>The port used by the debugger engine<br>to communicate with the Card |
| tip_ide_debug_port_1=<html>The port the IDE connects to on the <br>emulator to debug |
| tip_http_port_1=The port used for HTTP communication with the Card |
| debuglevel_1=<html>The amount of detailed debug information the emulator should<br>show in its log |
| tip_ramsize_1=<html>Quantitat de mem\u00f2ria <i>vol\u00e0til</i> que t\u00e9 aquesta targeta |
| tip_persistent_memory_1=<html>Quantitat de mem\u00f2ria <i>no vol\u00e0til</i> que t\u00e9 aquesta targeta |
| ServersPanel.removeButton.text=T&reure |
| ServersPanel.addButton.text=&Add.. |
| ServersPanel.noCustomizerLabel.text=No Customizer Available |
| TTL_MANAGE_DEVICES=Manage Devices |
| |