| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. |
| # |
| # Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved. |
| # |
| # Oracle and Java are registered trademarks of Oracle and/or its affiliates. |
| # Other names may be trademarks of their respective owners. |
| # |
| # The contents of this file are subject to the terms of either the GNU |
| # General Public License Version 2 only ("GPL") or the Common |
| # Development and Distribution License("CDDL") (collectively, the |
| # "License"). You may not use this file except in compliance with the |
| # License. You can obtain a copy of the License at |
| # http://www.netbeans.org/cddl-gplv2.html |
| # or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the |
| # specific language governing permissions and limitations under the |
| # License. When distributing the software, include this License Header |
| # Notice in each file and include the License file at |
| # nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the GPL Version 2 section of the License file that |
| # accompanied this code. If applicable, add the following below the |
| # License Header, with the fields enclosed by brackets [] replaced by |
| # your own identifying information: |
| # "Portions Copyrighted [year] [name of copyright owner]" |
| # |
| # Contributor(s): |
| # |
| # The Original Software is NetBeans. The Initial Developer of the Original |
| # Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun |
| # Microsystems, Inc. All Rights Reserved. |
| # |
| # If you wish your version of this file to be governed by only the CDDL |
| # or only the GPL Version 2, indicate your decision by adding |
| # "[Contributor] elects to include this software in this distribution |
| # under the [CDDL or GPL Version 2] license." If you do not indicate a |
| # single choice of license, a recipient has the option to distribute |
| # your version of this file under either the CDDL, the GPL Version 2 or |
| # to extend the choice of license to its licensees as provided above. |
| # However, if you add GPL Version 2 code and therefore, elected the GPL |
| # Version 2 license, then the option applies only if the new code is |
| # made subject to such option by the copyright holder. |
| |
| # Web Service Client resource bundle |
| Templates/WebServices=Serveis Web |
| Templates/WebServices/WebServiceClient=Client de Serveis Web |
| |
| TITLE_WebServiceClientWizard=WSDL and Client Location |
| |
| LBL_HttpProxyDlgTitle=HTTP Proxy Settings |
| LBL_HttpProxyHost=HTTP Proxy &Host\: |
| LBL_HttpProxyPort=HTTP Proxy &Port\: |
| |
| ERR_PortSpecifiedWithoutHost=If proxy host is not specified, proxy port should not be specified either. |
| ERR_MalformedProxyURL=URL an\u00f2mala del servidor proxy: {0} |
| ERR_HostSpecifiedWithoutPort=Now specify the port that this proxy host is running on. |
| ERR_PortNumberNegative=Proxy port cannot be negative. |
| ERR_PortNumberTooLarge=Proxy port cannot be greater than {0}. |
| ERR_PortNumberInvalid=''{0}'' is not a valid integer. |
| LBL_WsdlSource=Specify the WSDL file of the Web Service. |
| LBL_WsdlSourceUrl=&URL\: |
| LBL_RetrieveWsdl=Retrieve &WSDL |
| LBL_ProxySettings=Establir &Proxy... |
| LBL_LocalFNDescription=Especifiqueu el nom del fitxer local per al WSDL rebut. |
| LBL_WsdlUrl=WSDL &URL\: |
| LBL_LocalFilename=&Local Filename\: |
| LBL_WsdlSourceFilesystem=Fitxer &local\: |
| LBL_WsdlFilename=WSDL &Filename\: |
| LBL_Project=Pr&ojecte: |
| LBL_ProjectUrl=Pro&jecte: |
| LBL_PackageName=P&ackage\: |
| LBL_ClientType=Client &Type\: |
| LBL_Browse=Navega&r... |
| LBL_Browse1=Nav&egar... |
| TXT_JAX_WS_Style=JAX-WS Style |
| TXT_JAX_RPC_Style=JAX-RPC Style |
| |
| MSG_ServiceNotDeployed=WSDL file not available (web service not deployed). |
| MSG_ServerNotRunning=WSDL file not available (server not running). |
| |
| A11Y_WsdlSourceUrl=Create WS Client from the URL of the web service WSDL file |
| A11Y_WsdlSource=Create WS Client from the local WSDL file |
| A11Y_LocalFilename=Target location of WSDL file in the project |
| A11Y_Project=Current project name |
| A11Y_ClientType=Select the Client Type |
| A11Y_ProxySettings=Set up the HTTP proxy host and HTTP proxy port |
| |
| LBL_WebServiceClient=Client de Serveis Web |
| |
| ERR_WsCompileNotSupportedByTargetServer=The current target server for this project does not support JAX-RPC so no web service clients can be created. |
| ERR_NoStubsDefined=El projecte actual no defineix cap tipus d'stub de client de servei web. |
| MSG_EnterURL=Enter the URL of the service you wish to use. |
| MSG_RetrieveWSDL=Cliqueu a Recuperar WSDL per a baixar-vos el fitxer WSDL per a aquest servei. |
| MSG_DownloadProgress=Baixada en proc\u00e9s. Status: {0} |
| LBL_Unknown=desconegut |
| ERR_DownloadFailed=<html>Baixada fallida: {0}<br>Comproveu les prefer\u00e8ncies del proxy o b\u00e9 si el servidor s'est\u00e0 executant.</html> |
| ERR_UnknownHost=Equip desconegut: {0} (comproveu les prefer\u00e8ncies del proxy) |
| ERR_DownloadFailedUnknown=Baixada sense \u00e8xit per un motiu desconegut. |
| MSG_EnterFilename=Enter the name of the WSDL file representing the service you wish to use. |
| ERR_WsdlInvalid=WSDL file is invalid. |
| ERR_WsdlDoesNotExist=No existeix el fitxer WSDL. |
| MSG_MissingWsURL=<html>The URL for the web service is not specified in wsdl file. By using this wsdl the client code<br>will not work. Either fix problem in wsdl file (under META-INF[WEB-INF]/wsdl)<br>or set the web service url dynamically in runtime.</html> |
| ERR_NotWsdl={0} is not valid WSDL file. |
| MSG_EnterJavaPackageName=Enter the Java package where the service interfaces should be generated. |
| ERR_PackageInvalid=Package name is invalid. |
| ERR_PackageUsedForService=Package already used for holding {0}[service from WSDL] artifacts. |
| ERR_PackageUsedForClient=Package already used for holding {0}[client] artifacts. |
| TTL_SelectService=Browse Web Services |
| LBL_NoMetroInstalled=<html>For full Metro/JAX-WS 2.1 support for web services in NetBeans projects<br>install the <b>Metro Web Services Stack</b> by using the GlassFish V3 <b>Update Tool</b>.</html> |
| ERR_WrongSrcLevel=Nivell de codi necessari: {0} o superior |
| |
| LBL_WsdlFilterDescription=Web Service Descriptor Files (*.wsdl, *.asmx) |
| |
| ERR_WsdlParseFailure=Unable to parse WSDL file for client: {0} |
| ERR_CannotOpenWsdlFile=Failed to retrieve File instance for ''{0}''. |
| ERR_NoBuildScript=Unable to locate build script to create client interfaces. |
| ERR_ClientIOError=IO error occured while processing {0} file. Exception : {1} |
| ERR_WsCompileFailed=WsCompile script failed during initial client generation. |
| |
| ERR_NoWebServiceClientSupport=No web service client support found in selected project. |
| ERR_NoJaxrpcPluginFound=Heu de baixar-vos el complement amb la compatibilitat per a JAX-RPC per a crear un client JAX-RPC. |
| ERR_WsdlFileNotFound=Failed to retrieve FileObject instance for ''{0}''. |
| ERR_UnableToCreateTempFile=Unable to create temporary WSDL file ''{0}'' for client. |
| ERR_TempFileLocked=Temporary WSDL file ''{0}'' is locked and cannot be deleted. |
| ERR_TempFileNotDeleted=Temporary WSDL file ''{0}'' cannot be deleted. Error: {1} |
| |
| MSG_WizCreateClient=Creant client de servei web. |
| MSG_WizAddToRegistry=Adding test client to registry... |
| MSG_WizCopyingWSDL=Copying WSDL file... |
| MSG_WizCopyingSchemas=Copying schema files... |
| MSG_WizProcessingWSDL=Processing WSDL and wscompile config files... |
| MSG_WizParsingWSDL=Extraient informaci\u00f3 del servei des del WSDL... |
| MSG_WizUpdatingDD=Adding service-ref entry to deployment descriptor... |
| MSG_WizUpdatingBuildScript=Updating project build script... |
| MSG_WizGenerateClient=Running client generation script... |
| MSG_WizDone=Fet. |
| |
| LBL_PackageDescription=Specify a package name where the client java artifacts will be generated: |
| LBL_ClientStyleDescription=Specify the client style. |
| LBL_ClientLocationAndClientType=Specify a location and the client type. |
| |
| ACSN_WsdlSourceUrl=URL del servei web en execuci\u00f3 |
| ACSD_WsdlSourceUrl=Especifiqueu la URL del servei en execuci\u00f3 |
| ACSN_WsdlSourceFilesystem=Filename of WSDL file |
| ACSD_WsdlSourceFile=Specify path to WSDL file |
| |
| MSG_InvalidProjectPath=<html>Can not create web service clients in this project; the project path "{0}"<br>contains the "{1}" character which cannot be processed by wscompile.</html> |
| MSG_MissingSourceRoot=Project must define at least one source package folder. |
| MSG_SetUpProxyForImports=<html>WSDL file imports another WSDL file or XML schema files using the HTTP protocol.<br>If you are behind the proxy use "Proxy Settings..." button to make these resources available for wscompile utility.</html> |
| MSG_IdeGeneratedStaticStubOnly=<html>WSDL file imports another WSDL file through HTTP protocol.<br>\u00danicament el tipus de client "Stub est\u00e0tic generat per l'IDE" est\u00e0 suportat per a aquest cas.</html> |
| |
| ERR_FileNotFound=File "{0}" can not be found in "{1}" directory. |
| |
| |
| ERR_NeedProperSourceLevel=<html>To create web service clients in this project, the Java source level must be at least JDK 1.5</html> |
| |
| LBL_JAX_Version=Client &Style\: |
| MNE_JAX_Version=A |
| A11Y_WsdlURL=Create WS Client from WSDL URL |
| A11Y_BrowseWSDLProject=Project Browse button |
| A11Y_BrowseLocalFile=Local File Browse button |
| ACSN_WsdlSourceLocalFile=Local WSDL File |
| MSG_SPACE_IN_PROJECT_PATH=The project directory has spaces in its path. This may cause problems in client generation. |
| |
| MSG_ScanningInProgress=Escaneig en proc\u00e9s... |
| TOOLTIP_DEFAULT_PACKAGE=<html>If you don't specify the package name the default package based on WSDL namespace will be used.<br> If you require to change the package name later, use the WSDL Customization editor.</html> |
| |
| ERR_RPCEncodedJaxrpcClientRequired=Selected wsdl is rpc encoded. You must select JAX-RPC Client. |
| ERR_UnableToDetermineRPCEncoded="Unable to check if wsdl is rpc encoded." |
| |
| LBL_GenerateDispatch=Generate Dispatch code |
| LBL_DEFAULT_PACKAGE=<paquet predeterminat> |
| |