src/bg/platform/org-openide-loaders/org-openide-loaders/org/openide/loaders/Bundle_bg.properties

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
#
# Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved.
#
# Oracle and Java are registered trademarks of Oracle and/or its affiliates.
# Other names may be trademarks of their respective owners.
#
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common
# Development and Distribution License("CDDL") (collectively, the
# "License"). You may not use this file except in compliance with the
# License. You can obtain a copy of the License at
# http://www.netbeans.org/cddl-gplv2.html
# or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the
# specific language governing permissions and limitations under the
# License.  When distributing the software, include this License Header
# Notice in each file and include the License file at
# nbbuild/licenses/CDDL-GPL-2-CP.  Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the GPL Version 2 section of the License file that
# accompanied this code. If applicable, add the following below the
# License Header, with the fields enclosed by brackets [] replaced by
# your own identifying information:
# "Portions Copyrighted [year] [name of copyright owner]"
#
# Contributor(s):
#
# The Original Software is NetBeans. The Initial Developer of the Original
# Software is Sun Microsystems, Inc. Portions Copyright 1997-2009 Sun
# Microsystems, Inc. All Rights Reserved.
#
# If you wish your version of this file to be governed by only the CDDL
# or only the GPL Version 2, indicate your decision by adding
# "[Contributor] elects to include this software in this distribution
# under the [CDDL or GPL Version 2] license." If you do not indicate a
# single choice of license, a recipient has the option to distribute
# your version of this file under either the CDDL, the GPL Version 2 or
# to extend the choice of license to its licensees as provided above.
# However, if you add GPL Version 2 code and therefore, elected the GPL
# Version 2 license, then the option applies only if the new code is
# made subject to such option by the copyright holder.

OpenIDE-Module-Name=Datasystems API
OpenIDE-Module-Short-Description=NetBeans Open API for manipulating data objects.
OpenIDE-Module-Long-Description=The Datasystems API is a layer atop the Filesystems API which recognizes and groups data objects and gives them particular semantics. Once a part of the general Open APIs, it is now split into an independent module.
OpenIDE-Module-Display-Category=\u0418\u043d\u0444\u0440\u0430\u0441\u0442\u0440\u0443\u043a\u0442\u0443\u0440\u0430

#DefaultDataObject
HINT_DefaultDataObject=Unrecognized File

EXC_SharedAccess=Shared access

#Folder.Index
EXC_ReorderFailed=Cannot save new ordering.

# {0} - folder that cannot be deleted
EXC_CannotDelete2=Cannot delete file {0}.

# name for shadow of an object
# {0} real name of the shadow
# {1} real name of the original
# {2} full name of shadow file
# {3} full name of original file
# {4} display name of original node
FMT_shadowName={0} (\u2192)

# name for shadow of an object
# {0} real name of the shadow
# {1} real name of the original
# {2} full name of shadow file
# {3} full name of original file
FMT_shadowHint=Link to {3}

PROP_ShadowOriginalName=Original Name
HINT_ShadowOriginalName=Name of the object this link refers to.
PROP_ShadowOriginalFileSystem=Original Filesystem Name
HINT_ShadowOriginalFileSystem=Name of the filesystem of the original object.

# DataNode
PROP_name=\u0418\u043c\u0435
HINT_name=Name of this object.
PROP_template=Template
HINT_template=If True, this object is a template (can make instances of itself).
PROP_files=All Files
HINT_files=A list of files represented by this object.
PROP_size=File Size
HINT_size=Length of this file in bytes. (Only applies to the first file listed in All Files.)
PROP_lastModified=Modification Time
HINT_lastModified=When this file was last modified. (Only applies to the first file listed in All Files.)
PROP_extension=Extension
HINT_extension=Primary file extension.
ERROR_extension=Cannot change extension. File is modified.

# name of set with sorting options
PROP_sorting=Sorting
HINT_sorting=Sorting and ordering settings.

#
# folder sort mode property
PROP_sort=Sort Mode
HINT_sort=Determines how objects in the package should be sorted.
# SortModeEditor
VALUE_sort_none=Unsorted
VALUE_sort_names=By Name
VALUE_sort_class=By Type
VALUE_sort_folder_names=By Name (Packages First)
VALUE_sort_last_modified=By Modification Time
VALUE_sort_size=By File Size


#
# Names of paste types
#
PT_move=&Move
PT_copy=&Copy
PT_instantiate=&Instantiate
PT_shadow=Create &Link
PT_serialize=&Serialize
PT_instance=&Default instance

# 
SerializeBean_Text=&Name of file to serialize the instance to
SerializeBean_Title=Instance Serialization

#
# new folder
#
CTL_NewFolder=\u041f\u0430\u043f\u043a\u0430
CTL_NewFolderName=\u0418\u043c\u0435:
CTL_NewFolderTitle=Create New Folder
#CTL_NewFolderValue=NewFolder

# formatting of error message when creating a folder and a file of given name already exists there
# {0} name of the new folder being created
# {1} name of the folder the new folder is being created in
MSG_FMT_FileExists=File {0} already exists in folder {1}.

# formatting of error message when creating a folder and a folder with specified name already exists there
# {0} name of the new folder being created
# {1} name of the folder the new folder is being created in
MSG_FMT_FolderExists=Folder {0} already exists in folder {1}.

# when the object is larger than size expected to fit into memory
# {0} path to the file
# {1} name of the file
# {2} size in bytes
# {3} size in Kb
# {4} size in Mb
# {5} size in Gb
MSG_ObjectIsTooBig=The file {1} seems to be too large ({2,choice,0#{2}b|1024#{3} Kb|1100000#{4} Mb|1100000000#{5} Gb}) to safely open. \nOpening the file could cause OutOfMemoryError, which would make the IDE unusable. Do you really want to open it?



# XMLDataObject
PROP_XmlLoader_Name=XML Configuration Files
PROP_XmlError=Error (recoverable)
PROP_XmlWarning=\u0412\u043d\u0438\u043c\u0430\u043d\u0438\u0435
PROP_XmlFatalError=FATAL ERROR
###PROP_XmlMessage=#{0} \"{1}\" [{2}:{3},{4}]
#PROP_XmlMessage=#{0} \"{1}\" [{2}:{3}]
# ^^^ formatting of xml parser error message
# {0} level of error (PROP_Xml[Error|Warning|FatalError])
# {1} error message
# {2} system ID of xml document
# {3} line number
# {4} column number

# DataFolder
EXC_WrongName=Cannot create folder; {0} is not a valid name.

# {0} name of folder that can't be copied.
EXC_CannotCopyTheSame=Cannot copy {0}: The destination folder is the same as the source folder.
# {0} name of folder that can't be copied.
EXC_CannotCopySubfolder=Cannot copy {0}: The destination folder is a subfolder of the source folder.

#Title of the new from template dialog
# {0} = object which will be created
CTL_TemplateTitle2=New Wizard - {0}
#Title of the new from template dialog
# Object is not known. Used when template chooser panel is shown.
CTL_TemplateTitle=New Wizard
LAB_TemplateChooserPanelName=Choose Template
LAB_SelectTemplateBorder=&Select a Template:
MSG_NoDescription=No description
MSG_InitDescription=Initializing description...
LAB_TemplateDescriptionBorder=&Template Description:
LAB_TargetLocationPanelName=Target Location
LAB_TargetLocationDescription=Please select a folder for the newly created object or enter the folder name below:
LAB_TargetLocationDescription_Mnemonic=s
ACSD_TemplatesTree=N/A
ACSD_TemplateWizard1=N/A

CTL_NewObjectName=\u0418\u043c\u0435\:
ACSD_NewObjectName=N/A
ACSD_TargetLocationDescription=N/A
ACSD_TemplateWizard2=N/A

ACSD_NewObjectPanel=N/A

LBL_settingsNodeName=\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0438
EXC_folder_delete_failed=Could not remove source folder while moving.
#{0} = display name of the filesystem
FMT_TemplateDefaultRootFolderName=<top folder> [{0}]
FMT_DefaultNewObjectName=<default name>

LBL_shadow_loader_display_name=Links
LBL_folder_loader_display_name=Folders
LBL_default_loader_display_name=Unrecognized Objects
LBL_instance_loader_display_name=Action Instances

FMT_CannotCopyDo=Warning: Object {0} cannot be copied.
FMT_CannotMoveDo=Warning: Object {0} cannot be moved.

# InstanceDataObject
LBL_separator_instance=(separator)
PROP_instance_class=Class Name
HINT_instance_class=Java class name of the object being represented.
# {0} class name of bean to save
# {1} file to save the bean to
EXC_CannotSaveBean=There are problems with saving the {0} bean.

FMT_brokenShadowName={0} (Broken Link)
HINT_brokenShadowOriginalName=Broken Link
PROP_brokenShadowOriginalName=Broken Link
# what does Broken Link Filesystem refer to? Broken link to the filesystem? pkeegan
PROP_brokenShadowFileSystem=Broken Link Filesystem
HINT_brokenShadowFileSystem=Broken Link Filesystem
##InstanceDataObject.Depricated
LBL_BrokenSettings=<Unrecognized setting>

# human readable names, not shown anywhere
LBL_DOcopy=Data Object Copy Flavor
LBL_DOcut=Data Object Cut Flavor
#NewObjectPanel
LAB_NewObjectPanelName=New Object Name
FMT_DefaultNewObject=<default>

# DataLoader
# {0} - name of loader affected
EXC_missing_actions_in_loader=The popup menu for objects of type {0} could not be restored; using default settings.
LBL_loader_display_name=Loader

MSG_renameError=This object cannot be renamed from {0} to {1}.
MSG_NotValidName=Cannot give {0} an empty name.
ERR_NoFilesystem=No enabled filesystem. Make sure that you have at least one filesystem that is not read-only and is not hidden.

# TemplateWizardPanel2
MSG_fs_or_folder_does_not_exist=The target filesystem or folder does not exist.
MSG_fs_is_readonly=The target filesystem is read-only.
# {0} - name of the existing file
MSG_file_already_exist=The file {0} already exists.



#
# Messages for org.openide.actions in openide-loaders.jar
# 
ACT_FileSystemAction=Filesystem Action
#InstantiateAction
Instantiate=Instantiate
#SaveAsTemplateAction
SaveAsTemplate=Save As Template...
Title_SaveAsTemplate=Save As Template
CTL_SaveAsTemplate=&Select the category in which the new template will appear:
CTL_SaveAsTemplate_TemplatesRoot=\u0428\u0430\u0431\u043b\u043e\u043d\u0438
SaveAll=\u0417\u0430\u043f\u0438\u0448\u0438 \u0412\u0441\u0438\u0447\u043a\u043e
HINT_SaveAll=Save all files (if the Compile on Save feature is on, this will also compile/build your files)
# FileSystemRefreshAction
LAB_Refresh=Refresh Folder
# NewTemplateAction
EXC_TemplateFailed=Creation of the object from template failed.
NewTemplate=\u041d\u043e\u0432
NewTemplateAction=All Templates...


#
# Messages for org.openide.awt in openide-loaders.jar
# 
CTL_EmptyMenu=Empty




#
# Messages for org.openide.text in openide-loaders.jar
# 


# DataEditorSupport

# {0} = name of the data object
# {1} = file name with package
CTL_ObjectOpen=Opening {0} ...

# {0} = name of the data object
MSG_SaveFile=File {0} is modified. Save it ?

# messages for editor support

# {0} = 0 if readonly, 1 if modified, 2 if modified and readonly!, 3 otherwise
# {1} name of the file
#LAB_EditorName={0,choice,0#{1} [r/o]|1#{1} *|2#{1} [r/o] *|3#{1}}
TIP_editor_modified=\ (modified)
TIP_editor_ro=\ (read-only)

# format to create default display name for a line 
# {0} simple name of file
# {1} full name of file
# {2} line number 
FMT_LineDisplayName2={1}:{2}

# DataEditorSupport
# Cases when modified source file was changed to [read-only]
MSG_FileReadOnlyClosing=File {0} was changed to read-only! All changes will be discarded.
MSG_FileReadOnlySaving=File {0} was changed to read-only! Can not save it.
MSG_FileReadOnlyChanging=File {0} was changed to read-only!


MSG_BinaryFileQuestion=This file appears to contain binary data. Are you sure you want to open it in the text editor?
MSG_BinaryFileWarning=Binary File Detected

CTL_SaveAsAction=Sa&ve As...
MSG_SaveAsFailed=There were some problems while saving {0}\nCause: {1}
LBL_SaveAsTitle=Save As
MSG_CannotCreateTargetFolder=Cannot create the target folder.
MSG_SaveAs_SameFileSelected=Please, select a different file name.
MSG_SaveAs_SameFileSelected_Title=Save As
MSG_SaveAs_OverwriteQuestion=Are you sure you want to overwrite {0}?
MSG_SaveAs_OverwriteQuestion_Title=Save As

MSG_EncodingProblem=The file cannot be safely opened with encoding {0}. Do you want to continue opening it?