| #!/bin/bash |
| # ---------------------------------------------------------------------------- |
| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| # ---------------------------------------------------------------------------- |
| |
| # Bugzilla 37848: When no TTY is available, don't output to console |
| have_tty=0 |
| # shellcheck disable=SC2006 |
| if [[ "`tty`" != "not a tty" ]]; then |
| have_tty=1 |
| fi |
| |
| # Bugzilla 37848: When no TTY is available, don't output to console |
| have_tty=0 |
| # shellcheck disable=SC2006 |
| if [[ "`tty`" != "not a tty" ]]; then |
| have_tty=1 |
| fi |
| |
| # Only use colors if connected to a terminal |
| if [[ ${have_tty} -eq 1 ]]; then |
| PRIMARY=$(printf '\033[38;5;082m') |
| RED=$(printf '\033[31m') |
| GREEN=$(printf '\033[32m') |
| YELLOW=$(printf '\033[33m') |
| BLUE=$(printf '\033[34m') |
| BOLD=$(printf '\033[1m') |
| RESET=$(printf '\033[0m') |
| else |
| PRIMARY="" |
| RED="" |
| GREEN="" |
| YELLOW="" |
| BLUE="" |
| BOLD="" |
| RESET="" |
| fi |
| |
| echo_r () { |
| # Color red: Error, Failed |
| [[ $# -ne 1 ]] && return 1 |
| # shellcheck disable=SC2059 |
| printf "[%sStreamPark%s] %s$1%s\n" $BLUE $RESET $RED $RESET |
| } |
| |
| echo_g () { |
| # Color green: Success |
| [[ $# -ne 1 ]] && return 1 |
| # shellcheck disable=SC2059 |
| printf "[%sStreamPark%s] %s$1%s\n" $BLUE $RESET $GREEN $RESET |
| } |
| |
| echo_y () { |
| # Color yellow: Warning |
| [[ $# -ne 1 ]] && return 1 |
| # shellcheck disable=SC2059 |
| printf "[%sStreamPark%s] %s$1%s\n" $BLUE $RESET $YELLOW $RESET |
| } |
| |
| echo_w () { |
| # Color yellow: White |
| [[ $# -ne 1 ]] && return 1 |
| # shellcheck disable=SC2059 |
| printf "[%sStreamPark%s] %s$1%s\n" $BLUE $RESET $WHITE $RESET |
| } |
| |
| # OS specific support. $var _must_ be set to either true or false. |
| cygwin=false |
| os400=false |
| # shellcheck disable=SC2006 |
| case "`uname`" in |
| CYGWIN*) cygwin=true;; |
| OS400*) os400=true;; |
| esac |
| |
| # resolve links - $0 may be a softlink |
| PRG="$0" |
| |
| while [[ -h "$PRG" ]]; do |
| # shellcheck disable=SC2006 |
| ls=`ls -ld "$PRG"` |
| # shellcheck disable=SC2006 |
| link=`expr "$ls" : '.*-> \(.*\)$'` |
| if expr "$link" : '/.*' > /dev/null; then |
| PRG="$link" |
| else |
| # shellcheck disable=SC2006 |
| PRG=`dirname "$PRG"`/"$link" |
| fi |
| done |
| |
| # Get standard environment variables |
| # shellcheck disable=SC2006 |
| PRG_DIR=`dirname "$PRG"` |
| |
| print_logo() { |
| printf '\n' |
| printf ' %s _____ __ __ %s\n' $PRIMARY $RESET |
| printf ' %s / ___// /_________ ____ _____ ___ ____ ____ ______/ /__ %s\n' $PRIMARY $RESET |
| printf ' %s \__ \/ __/ ___/ _ \/ __ `/ __ `__ \/ __ \ __ `/ ___/ //_/ %s\n' $PRIMARY $RESET |
| printf ' %s ___/ / /_/ / / __/ /_/ / / / / / / /_/ / /_/ / / / ,< %s\n' $PRIMARY $RESET |
| printf ' %s /____/\__/_/ \___/\__,_/_/ /_/ /_/ ____/\__,_/_/ /_/|_| %s\n' $PRIMARY $RESET |
| printf ' %s /_/ %s\n\n' $PRIMARY $RESET |
| printf ' %s Version: 2.1.0 %s\n' $BLUE $RESET |
| printf ' %s WebSite: https://streampark.apache.org%s\n' $BLUE $RESET |
| printf ' %s GitHub : http://github.com/apache/streampark%s\n\n' $BLUE $RESET |
| printf ' %s ──────── Apache StreamPark, Make stream processing easier ô~ô!%s\n\n' $PRIMARY $RESET |
| } |
| |
| checkPerm() { |
| if [ -x "$PRG_DIR/mvnw" ]; then |
| return 0 |
| else |
| return 1 |
| fi |
| } |
| |
| selectScala() { |
| echo_w 'StreamPark supports Scala 2.11 and 2.12. Which version do you need ?' |
| select scala in "2.11" "2.12" |
| do |
| case $scala in |
| "2.11") |
| return 1 |
| ;; |
| "2.12") |
| return 2 |
| ;; |
| *) |
| echo_r "invalid selected, exit.." |
| exit 1 |
| ;; |
| esac |
| done |
| } |
| |
| selectMode() { |
| echo_w 'StreamPark supports front-end and server-side mixed / detached packaging mode, Which mode do you need ?' |
| select scala in "mixed mode" "detached mode" |
| do |
| case $scala in |
| "mixed mode") |
| echo_g "mixed mode selected (mixed build project of front-end and back-ends)" |
| return 1 |
| ;; |
| "detached mode") |
| echo_g "detached mode selected (Only build the back-end project, the front-end build need by yourself)" |
| return 2 |
| ;; |
| *) |
| echo_r "invalid selected, exit.." |
| exit 1 |
| ;; |
| esac |
| done |
| } |
| |
| |
| mixedPackage() { |
| scala="scala-2.11" |
| if [ "$1" == 2 ]; then |
| scala="scala-2.12" |
| fi |
| |
| echo_g "build info: package mode @ mixed, $scala, now build starting..." |
| |
| "$PRG_DIR/mvnw" -P$scala,shaded,webapp,dist -DskipTests clean install |
| |
| if [ $? -eq 0 ]; then |
| printf '\n' |
| echo_g """StreamPark project build successful! |
| info: package mode @ mixed, $scala |
| dist: $(cd "$PRG_DIR" &>/dev/null && pwd)/dist\n""" |
| fi |
| } |
| |
| detachedPackage () { |
| scala="scala-2.11" |
| if [ "$1" == 2 ]; then |
| scala="scala-2.12" |
| fi |
| |
| echo_g "build info: package mode @ detached, $scala, now build starting..." |
| |
| "$PRG_DIR"/mvnw -P$scala,shaded,dist -DskipTests clean install |
| |
| if [ $? -eq 0 ]; then |
| printf '\n' |
| echo_g """StreamPark project build successful! |
| info: package mode @ detached, $scala |
| dist: $(cd "$PRG_DIR" &>/dev/null && pwd)/dist |
| |
| Next, you need to build front-end by yourself. |
| |
| 1) cd $(cd "$PRG_DIR" &>/dev/null && pwd)/streampark-console/streampark-console-webapp |
| 2) pnpm install && pnpm build |
| |
| please visit: https://streampark.apache.org/docs/user-guide/deployment for more detail. \n""" |
| fi |
| } |
| |
| main() { |
| print_logo |
| checkPerm |
| if [ $? -eq 1 ]; then |
| # shellcheck disable=SC2006 |
| echo_r "permission denied: $PRG_DIR/mvnw, please check." |
| exit 1 |
| fi |
| selectMode |
| if [ $? -eq 1 ]; then |
| selectScala |
| if [ $? -eq 1 ]; then |
| mixedPackage 1 |
| else |
| mixedPackage 2 |
| fi |
| else |
| selectScala |
| if [ $? -eq 1 ]; then |
| detachedPackage 1 |
| else |
| detachedPackage 2 |
| fi |
| fi |
| } |
| |
| main "$@" |
