src/main/site/asciidoc/cygwin.adoc - hbase - Git at Google

 ////
 Licensed to the Apache Software Foundation (ASF) under one
 or more contributor license agreements.  See the NOTICE file
 distributed with this work for additional information
 regarding copyright ownership.  The ASF licenses this file
 to you under the Apache License, Version 2.0 (the
 "License"); you may not use this file except in compliance
 with the License.  You may obtain a copy of the License at

   http://www.apache.org/licenses/LICENSE-2.0

 Unless required by applicable law or agreed to in writing,
 software distributed under the License is distributed on an
 "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 KIND, either express or implied.  See the License for the
 specific language governing permissions and limitations
 under the License.
 ////


 == Installing Apache HBase (TM) on Windows using Cygwin

 == Introduction

 link:http://hbase.apache.org[Apache HBase (TM)] is a distributed, column-oriented store, modeled after Google's link:http://research.google.com/archive/bigtable.html[BigTable]. Apache HBase is built on top of link:http://hadoop.apache.org[Hadoop] for its link:http://hadoop.apache.org/mapreduce[MapReduce] link:http://hadoop.apache.org/hdfs[distributed file system] implementations. All these projects are open-source and part of the link:http://www.apache.org[Apache Software Foundation].

 == Purpose

 This document explains the *intricacies* of running Apache HBase on Windows using Cygwin* as an all-in-one single-node installation for testing and development. The HBase link:http://hbase.apache.org/apidocs/overview-summary.html#overview_description[Overview] and link:book.html#getting_started[QuickStart] guides on the other hand go a long way in explaning how to setup link:http://hadoop.apache.org/hbase[HBase] in more complex deployment scenarios.

 == Installation

 For running Apache HBase on Windows, 3 technologies are required:
 * Java
 * Cygwin
 * SSH

 The following paragraphs detail the installation of each of the aforementioned technologies.

 === Java

 HBase depends on the link:http://java.sun.com/javase/6/[Java Platform, Standard Edition, 6 Release]. So the target system has to be provided with at least the Java Runtime Environment (JRE); however if the system will also be used for development, the Jave Development Kit (JDK) is preferred. You can download the latest versions for both from link:http://java.sun.com/javase/downloads/index.jsp[Sun's download page]. Installation is a simple GUI wizard that guides you through the process.

 === Cygwin

 Cygwin is probably the oddest technology in this solution stack. It provides a dynamic link library that emulates most of a *nix environment on Windows. On top of that a whole bunch of the most common *nix tools are supplied. Combined, the DLL with the tools form a very *nix-alike environment on Windows.

 For installation, Cygwin provides the link:http://cygwin.com/setup.exe[`setup.exe` utility] that tracks the versions of all installed components on the target system and provides the mechanism for installing or updating everything from the mirror sites of Cygwin.

 To support installation, the `setup.exe` utility uses 2 directories on the target system. The *Root* directory for Cygwin (defaults to _C:\cygwin)_ which will become _/_ within the eventual Cygwin installation; and the *Local Package* directory (e.g. _C:\cygsetup_ that is the cache where `setup.exe`stores the packages before they are installed. The cache must not be the same folder as the Cygwin root.

 Perform following steps to install Cygwin, which are elaboratly detailed in the link:http://cygwin.com/cygwin-ug-net/setup-net.html[2nd chapter] of the link:http://cygwin.com/cygwin-ug-net/cygwin-ug-net.html[Cygwin User's Guide].

 . Make sure you have `Administrator` privileges on the target system.
 . Choose and create you Root and *Local Package* directories. A good suggestion is to use `C:\cygwin\root` and `C:\cygwin\setup` folders.
 . Download the `setup.exe` utility and save it to the *Local Package* directory. Run the `setup.exe` utility.
 .. Choose  the `Install from Internet` option.
 .. Choose your *Root* and *Local Package* folders.
 .. Select an appropriate mirror.
 .. Don't select any additional packages yet, as we only want to install Cygwin for now.
 .. Wait for download and install.
 .. Finish the installation.
 . Optionally, you can now also add a shortcut to your Start menu pointing to the `setup.exe` utility in the *Local Package *folder.
 . Add `CYGWIN_HOME` system-wide environment variable that points to your *Root* directory.
 . Add `%CYGWIN_HOME%\bin` to the end of your `PATH` environment variable.
 . Reboot the sytem after making changes to the environment variables otherwise the OS will not be able to find the Cygwin utilities.
 . Test your installation by running your freshly created shortcuts or the `Cygwin.bat` command in the *Root* folder. You should end up in a terminal window that is running a link:http://www.gnu.org/software/bash/manual/bashref.html[Bash shell]. Test the shell by issuing following commands:
 .. `cd /` should take you to thr *Root* directory in Cygwin.
 .. The `LS` commands that should list all files and folders in the current directory.
 .. Use the `exit` command to end the terminal.
 . When needed, to *uninstall* Cygwin you can simply delete the *Root* and *Local Package* directory, and the *shortcuts* that were created during installation.

 === SSH

 HBase (and Hadoop) rely on link:http://nl.wikipedia.org/wiki/Secure_Shell[*SSH*] for interprocess/-node *communication* and launching* remote commands*. SSH will be provisioned on the target system via Cygwin, which supports running Cygwin programs as *Windows services*!

 . Rerun the `*setup.exe*`* utility*.
 . Leave all parameters as is, skipping through the wizard using the `Next` button until the `Select Packages` panel is shown.
 . Maximize the window and click the `View` button to toggle to the list view, which is ordered alfabetically on `Package`, making it easier to find the packages we'll need.
 . Select the following packages by clicking the status word (normally `Skip`) so it's marked for installation. Use the `Next `button to download and install the packages.
 .. `OpenSSH`
 .. `tcp_wrappers`
 .. `diffutils`
 .. `zlib`
 . Wait for the install to complete and finish the installation.

 === HBase

 Download the *latest release* of Apache HBase from link:http://www.apache.org/dyn/closer.cgi/hbase/. As the Apache HBase distributable is just a zipped archive, installation is as simple as unpacking the archive so it ends up in its final *installation* directory. Notice that HBase has to be installed in Cygwin and a good directory suggestion is to use `/usr/local/` (or [`*Root* directory]\usr\local` in Windows slang). You should end up with a `/usr/local/hbase-_versi` installation in Cygwin.

 This finishes installation. We go on with the configuration.

 == Configuration

 There are 3 parts left to configure: *Java, SSH and HBase* itself. Following paragraphs explain eacht topic in detail.

 === Java

 One important thing to remember in shell scripting in general (i.e. *nix and Windows) is that managing, manipulating and assembling path names that contains spaces can be very hard, due to the need to escape and quote those characters and strings. So we try to stay away from spaces in path names. *nix environments can help us out here very easily by using *symbolic links*.

 . Create a link in `/usr/local` to the Java home directory by using the following command and substituting the name of your chosen Java environment: +
 ----
 LN -s /cygdrive/c/Program\ Files/Java/*_jre name_*/usr/local/*_jre name_*
 ----
 . Test your java installation by changing directories to your Java folder `CD /usr/local/_jre name_` and issueing the command `./bin/java -version`. This should output your version of the chosen JRE.

 === SSH

 Configuring *SSH *is quite elaborate, but primarily a question of launching it by default as a* Windows service*.

 . On Windows Vista and above make sure you run the Cygwin shell with *elevated privileges*, by right-clicking on the shortcut an using `Run as Administrator`.
 . First of all, we have to make sure the *rights on some crucial files* are correct. Use the commands underneath. You can verify all rights by using the `LS -L` command on the different files. Also, notice the auto-completion feature in the shell using `TAB` is extremely handy in these situations.
 .. `chmod +r /etc/passwd` to make the passwords file readable for all
 .. `chmod u+w /etc/passwd` to make the passwords file writable for the owner
 .. `chmod +r /etc/group` to make the groups file readable for all
 .. `chmod u+w /etc/group` to make the groups file writable for the owner
 .. `chmod 755 /var` to make the var folder writable to owner and readable and executable to all
 . Edit the */etc/hosts.allow* file using your favorite editor (why not VI in the shell!) and make sure the following two lines are in there before the `PARANOID` line: +
 ----
 ALL : localhost 127.0.0.1/32 : allow
 ALL : [::1]/128 : allow
 ----
 . Next we have to *configure SSH* by using the script `ssh-host-config`.
 .. If this script asks to overwrite an existing `/etc/ssh_config`, answer `yes`.
 .. If this script asks to overwrite an existing `/etc/sshd_config`, answer `yes`.
 .. If this script asks to use privilege separation, answer `yes`.
 .. If this script asks to install `sshd` as a service, answer `yes`. Make sure you started your shell as Adminstrator!
 .. If this script asks for the CYGWIN value, just `enter` as the default is `ntsec`.
 .. If this script asks to create the `sshd` account, answer `yes`.
 .. If this script asks to use a different user name as service account, answer `no` as the default will suffice.
 .. If this script asks to create the `cyg_server` account, answer `yes`. Enter a password for the account.
 . *Start the SSH service* using `net start sshd` or `cygrunsrv  --start  sshd`. Notice that `cygrunsrv` is the utility that make the process run as a Windows service. Confirm that you see a message stating that `the CYGWIN sshd service  was started succesfully.`
 . Harmonize Windows and Cygwin* user account* by using the commands: +
 ----
 mkpasswd -cl > /etc/passwd
 mkgroup --local > /etc/group
 ----
 . Test *the installation of SSH:
 .. Open a new Cygwin terminal.
 .. Use the command `whoami` to verify your userID.
 .. Issue an `ssh localhost` to connect to the system itself.
 .. Answer `yes` when presented with the server's fingerprint.
 .. Issue your password when prompted.
 .. Test a few commands in the remote session
 .. The `exit` command should take you back to your first shell in Cygwin.
 . `Exit` should terminate the Cygwin shell.

 === HBase

 If all previous configurations are working properly, we just need some tinkering at the *HBase config* files to properly resolve on Windows/Cygwin. All files and paths referenced here start from the HBase `[*installation* directory]` as working directory.

 . HBase uses the `./conf/*hbase-env.sh*` to configure its dependencies on the runtime environment. Copy and uncomment following lines just underneath their original, change them to fit your environemnt. They should read something like: +
 ----
 export JAVA_HOME=/usr/local/_jre name_
 export HBASE_IDENT_STRING=$HOSTNAME
 ----
 . HBase uses the _./conf/`*hbase-default.xml*`_ file for configuration. Some properties do not resolve to existing directories because the JVM runs on Windows. This is the major issue to keep in mind when working with Cygwin: within the shell all paths are *nix-alike, hence relative to the root `/`. However, every parameter that is to be consumed within the windows processes themself, need to be Windows settings, hence `C:\`-alike. Change following propeties in the configuration file, adjusting paths where necessary to conform with your own installation:
 .. `hbase.rootdir` must read e.g. `file:///C:/cygwin/root/tmp/hbase/data`
 .. `hbase.tmp.dir` must read `C:/cygwin/root/tmp/hbase/tmp`
 .. `hbase.zookeeper.quorum` must read `127.0.0.1` because for some reason `localhost` doesn't seem to resolve properly on Cygwin.
 . Make sure the configured `hbase.rootdir` and `hbase.tmp.dir` *directories exist* and have the proper* rights* set up e.g. by issuing a `chmod 777` on them.

 == Testing

 This should conclude the installation and configuration of Apache HBase on Windows using Cygwin. So it's time *to test it*.

 . Start a Cygwin* terminal*, if you haven't already.
 . Change directory to HBase *installation* using `CD /usr/local/hbase-_version_`, preferably using auto-completion.
 . *Start HBase* using the command `./bin/start-hbase.sh`
 .. When prompted to accept the SSH fingerprint, answer `yes`.
 .. When prompted, provide your password. Maybe multiple times.
 .. When the command completes, the HBase server should have started.
 .. However, to be absolutely certain, check the logs in the `./logs` directory for any exceptions.
 . Next we *start the HBase shell* using the command `./bin/hbase shell`
 . We run some simple *test commands*
 .. Create a simple table using command `create 'test', 'data'`
 .. Verify the table exists using the command `list`
 .. Insert data into the table using e.g. +
 ----
 put 'test', 'row1', 'data:1', 'value1'
 put 'test', 'row2', 'data:2', 'value2'
 put 'test', 'row3', 'data:3', 'value3'
 ----
 .. List all rows in the table using the command `scan 'test'` that should list all the rows previously inserted. Notice how 3 new columns where added without changing the schema!
 .. Finally we get rid of the table by issuing `disable 'test'` followed by `drop 'test'` and verified by `list` which should give an empty listing.
 . *Leave the shell* by `exit`
 . To *stop the HBase server* issue the `./bin/stop-hbase.sh` command. And wait for it to complete!!! Killing the process might corrupt your data on disk.
 . In case of *problems*,
 .. Verify the HBase logs in the `./logs` directory.
 .. Try to fix the problem
 .. Get help on the forums or IRC (`#hbase@freenode.net`). People are very active and keen to help out!
 .. Stop and retest the server.

 == Conclusion

 Now your *HBase *server is running, *start coding* and build that next killer app on this particular, but scalable datastore!
	////
	Licensed to the Apache Software Foundation (ASF) under one
	or more contributor license agreements. See the NOTICE file
	distributed with this work for additional information
	regarding copyright ownership. The ASF licenses this file
	to you under the Apache License, Version 2.0 (the
	"License"); you may not use this file except in compliance
	with the License. You may obtain a copy of the License at

	http://www.apache.org/licenses/LICENSE-2.0

	Unless required by applicable law or agreed to in writing,
	software distributed under the License is distributed on an
	"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
	KIND, either express or implied. See the License for the
	specific language governing permissions and limitations
	under the License.
	////


	== Installing Apache HBase (TM) on Windows using Cygwin

	== Introduction

	link:http://hbase.apache.org[Apache HBase (TM)] is a distributed, column-oriented store, modeled after Google's link:http://research.google.com/archive/bigtable.html[BigTable]. Apache HBase is built on top of link:http://hadoop.apache.org[Hadoop] for its link:http://hadoop.apache.org/mapreduce[MapReduce] link:http://hadoop.apache.org/hdfs[distributed file system] implementations. All these projects are open-source and part of the link:http://www.apache.org[Apache Software Foundation].

	== Purpose

	This document explains the intricacies of running Apache HBase on Windows using Cygwin* as an all-in-one single-node installation for testing and development. The HBase link:http://hbase.apache.org/apidocs/overview-summary.html#overview_description[Overview] and link:book.html#getting_started[QuickStart] guides on the other hand go a long way in explaning how to setup link:http://hadoop.apache.org/hbase[HBase] in more complex deployment scenarios.

	== Installation

	For running Apache HBase on Windows, 3 technologies are required:
	* Java
	* Cygwin
	* SSH

	The following paragraphs detail the installation of each of the aforementioned technologies.

	=== Java

	HBase depends on the link:http://java.sun.com/javase/6/[Java Platform, Standard Edition, 6 Release]. So the target system has to be provided with at least the Java Runtime Environment (JRE); however if the system will also be used for development, the Jave Development Kit (JDK) is preferred. You can download the latest versions for both from link:http://java.sun.com/javase/downloads/index.jsp[Sun's download page]. Installation is a simple GUI wizard that guides you through the process.

	=== Cygwin

	Cygwin is probably the oddest technology in this solution stack. It provides a dynamic link library that emulates most of a nix environment on Windows. On top of that a whole bunch of the most common nix tools are supplied. Combined, the DLL with the tools form a very *nix-alike environment on Windows.

	For installation, Cygwin provides the link:http://cygwin.com/setup.exe[`setup.exe` utility] that tracks the versions of all installed components on the target system and provides the mechanism for installing or updating everything from the mirror sites of Cygwin.

	To support installation, the `setup.exe` utility uses 2 directories on the target system. The Root directory for Cygwin (defaults to _C:\cygwin)_ which will become _/_ within the eventual Cygwin installation; and the Local Package directory (e.g. _C:\cygsetup_ that is the cache where `setup.exe`stores the packages before they are installed. The cache must not be the same folder as the Cygwin root.

	Perform following steps to install Cygwin, which are elaboratly detailed in the link:http://cygwin.com/cygwin-ug-net/setup-net.html[2nd chapter] of the link:http://cygwin.com/cygwin-ug-net/cygwin-ug-net.html[Cygwin User's Guide].

	. Make sure you have `Administrator` privileges on the target system.
	. Choose and create you Root and Local Package directories. A good suggestion is to use `C:\cygwin\root` and `C:\cygwin\setup` folders.
	. Download the `setup.exe` utility and save it to the Local Package directory. Run the `setup.exe` utility.
	.. Choose the `Install from Internet` option.
	.. Choose your Root and Local Package folders.
	.. Select an appropriate mirror.
	.. Don't select any additional packages yet, as we only want to install Cygwin for now.
	.. Wait for download and install.
	.. Finish the installation.
	. Optionally, you can now also add a shortcut to your Start menu pointing to the `setup.exe` utility in the Local Package folder.
	. Add `CYGWIN_HOME` system-wide environment variable that points to your Root directory.
	. Add `%CYGWIN_HOME%\bin` to the end of your `PATH` environment variable.
	. Reboot the sytem after making changes to the environment variables otherwise the OS will not be able to find the Cygwin utilities.
	. Test your installation by running your freshly created shortcuts or the `Cygwin.bat` command in the Root folder. You should end up in a terminal window that is running a link:http://www.gnu.org/software/bash/manual/bashref.html[Bash shell]. Test the shell by issuing following commands:
	.. `cd /` should take you to thr Root directory in Cygwin.
	.. The `LS` commands that should list all files and folders in the current directory.
	.. Use the `exit` command to end the terminal.
	. When needed, to uninstall Cygwin you can simply delete the Root and Local Package directory, and the shortcuts that were created during installation.

	=== SSH

	HBase (and Hadoop) rely on link:http://nl.wikipedia.org/wiki/Secure_Shell[SSH] for interprocess/-node communication and launching* remote commands. SSH will be provisioned on the target system via Cygwin, which supports running Cygwin programs as Windows services*!

	. Rerun the `setup.exe`* utility*.
	. Leave all parameters as is, skipping through the wizard using the `Next` button until the `Select Packages` panel is shown.
	. Maximize the window and click the `View` button to toggle to the list view, which is ordered alfabetically on `Package`, making it easier to find the packages we'll need.
	. Select the following packages by clicking the status word (normally `Skip`) so it's marked for installation. Use the `Next `button to download and install the packages.
	.. `OpenSSH`
	.. `tcp_wrappers`
	.. `diffutils`
	.. `zlib`
	. Wait for the install to complete and finish the installation.

	=== HBase

	Download the latest release of Apache HBase from link:http://www.apache.org/dyn/closer.cgi/hbase/. As the Apache HBase distributable is just a zipped archive, installation is as simple as unpacking the archive so it ends up in its final installation directory. Notice that HBase has to be installed in Cygwin and a good directory suggestion is to use `/usr/local/` (or [`Root directory]\usr\local` in Windows slang). You should end up with a `/usr/local/hbase-_versi` installation in Cygwin.

	This finishes installation. We go on with the configuration.

	== Configuration

	There are 3 parts left to configure: Java, SSH and HBase itself. Following paragraphs explain eacht topic in detail.

	=== Java

	One important thing to remember in shell scripting in general (i.e. nix and Windows) is that managing, manipulating and assembling path names that contains spaces can be very hard, due to the need to escape and quote those characters and strings. So we try to stay away from spaces in path names. nix environments can help us out here very easily by using symbolic links.

	. Create a link in `/usr/local` to the Java home directory by using the following command and substituting the name of your chosen Java environment: +
	----
	LN -s /cygdrive/c/Program\ Files/Java/_jre name_/usr/local/_jre name_
	----
	. Test your java installation by changing directories to your Java folder `CD /usr/local/_jre name_` and issueing the command `./bin/java -version`. This should output your version of the chosen JRE.

	=== SSH

	Configuring SSH is quite elaborate, but primarily a question of launching it by default as a* Windows service*.

	. On Windows Vista and above make sure you run the Cygwin shell with elevated privileges, by right-clicking on the shortcut an using `Run as Administrator`.
	. First of all, we have to make sure the rights on some crucial files are correct. Use the commands underneath. You can verify all rights by using the `LS -L` command on the different files. Also, notice the auto-completion feature in the shell using `TAB` is extremely handy in these situations.
	.. `chmod +r /etc/passwd` to make the passwords file readable for all
	.. `chmod u+w /etc/passwd` to make the passwords file writable for the owner
	.. `chmod +r /etc/group` to make the groups file readable for all
	.. `chmod u+w /etc/group` to make the groups file writable for the owner
	.. `chmod 755 /var` to make the var folder writable to owner and readable and executable to all
	. Edit the /etc/hosts.allow file using your favorite editor (why not VI in the shell!) and make sure the following two lines are in there before the `PARANOID` line: +
	----
	ALL : localhost 127.0.0.1/32 : allow
	ALL : [::1]/128 : allow
	----
	. Next we have to configure SSH by using the script `ssh-host-config`.
	.. If this script asks to overwrite an existing `/etc/ssh_config`, answer `yes`.
	.. If this script asks to overwrite an existing `/etc/sshd_config`, answer `yes`.
	.. If this script asks to use privilege separation, answer `yes`.
	.. If this script asks to install `sshd` as a service, answer `yes`. Make sure you started your shell as Adminstrator!
	.. If this script asks for the CYGWIN value, just `enter` as the default is `ntsec`.
	.. If this script asks to create the `sshd` account, answer `yes`.
	.. If this script asks to use a different user name as service account, answer `no` as the default will suffice.
	.. If this script asks to create the `cyg_server` account, answer `yes`. Enter a password for the account.
	. Start the SSH service using `net start sshd` or `cygrunsrv --start sshd`. Notice that `cygrunsrv` is the utility that make the process run as a Windows service. Confirm that you see a message stating that `the CYGWIN sshd service was started succesfully.`
	. Harmonize Windows and Cygwin* user account* by using the commands: +
	----
	mkpasswd -cl > /etc/passwd
	mkgroup --local > /etc/group
	----
	. Test *the installation of SSH:
	.. Open a new Cygwin terminal.
	.. Use the command `whoami` to verify your userID.
	.. Issue an `ssh localhost` to connect to the system itself.
	.. Answer `yes` when presented with the server's fingerprint.
	.. Issue your password when prompted.
	.. Test a few commands in the remote session
	.. The `exit` command should take you back to your first shell in Cygwin.
	. `Exit` should terminate the Cygwin shell.

	=== HBase

	If all previous configurations are working properly, we just need some tinkering at the HBase config files to properly resolve on Windows/Cygwin. All files and paths referenced here start from the HBase `[installation directory]` as working directory.

	. HBase uses the `./conf/hbase-env.sh` to configure its dependencies on the runtime environment. Copy and uncomment following lines just underneath their original, change them to fit your environemnt. They should read something like: +
	----
	export JAVA_HOME=/usr/local/_jre name_
	export HBASE_IDENT_STRING=$HOSTNAME
	----
	. HBase uses the _./conf/`hbase-default.xml`_ file for configuration. Some properties do not resolve to existing directories because the JVM runs on Windows. This is the major issue to keep in mind when working with Cygwin: within the shell all paths are *nix-alike, hence relative to the root `/`. However, every parameter that is to be consumed within the windows processes themself, need to be Windows settings, hence `C:\`-alike. Change following propeties in the configuration file, adjusting paths where necessary to conform with your own installation:
	.. `hbase.rootdir` must read e.g. `file:///C:/cygwin/root/tmp/hbase/data`
	.. `hbase.tmp.dir` must read `C:/cygwin/root/tmp/hbase/tmp`
	.. `hbase.zookeeper.quorum` must read `127.0.0.1` because for some reason `localhost` doesn't seem to resolve properly on Cygwin.
	. Make sure the configured `hbase.rootdir` and `hbase.tmp.dir` directories exist and have the proper* rights* set up e.g. by issuing a `chmod 777` on them.

	== Testing

	This should conclude the installation and configuration of Apache HBase on Windows using Cygwin. So it's time to test it.

	. Start a Cygwin* terminal*, if you haven't already.
	. Change directory to HBase installation using `CD /usr/local/hbase-_version_`, preferably using auto-completion.
	. Start HBase using the command `./bin/start-hbase.sh`
	.. When prompted to accept the SSH fingerprint, answer `yes`.
	.. When prompted, provide your password. Maybe multiple times.
	.. When the command completes, the HBase server should have started.
	.. However, to be absolutely certain, check the logs in the `./logs` directory for any exceptions.
	. Next we start the HBase shell using the command `./bin/hbase shell`
	. We run some simple test commands
	.. Create a simple table using command `create 'test', 'data'`
	.. Verify the table exists using the command `list`
	.. Insert data into the table using e.g. +
	----
	put 'test', 'row1', 'data:1', 'value1'
	put 'test', 'row2', 'data:2', 'value2'
	put 'test', 'row3', 'data:3', 'value3'
	----
	.. List all rows in the table using the command `scan 'test'` that should list all the rows previously inserted. Notice how 3 new columns where added without changing the schema!
	.. Finally we get rid of the table by issuing `disable 'test'` followed by `drop 'test'` and verified by `list` which should give an empty listing.
	. Leave the shell by `exit`
	. To stop the HBase server issue the `./bin/stop-hbase.sh` command. And wait for it to complete!!! Killing the process might corrupt your data on disk.
	. In case of problems,
	.. Verify the HBase logs in the `./logs` directory.
	.. Try to fix the problem
	.. Get help on the forums or IRC (`#hbase@freenode.net`). People are very active and keen to help out!
	.. Stop and retest the server.

	== Conclusion

	Now your HBase server is running, start coding and build that next killer app on this particular, but scalable datastore!