| { |
| "id": { |
| "desc": "<p>Component ID, not specified by default. If specified, it can be used to refer the component in option or API.</p>\n" |
| }, |
| "zlevel": { |
| "desc": "<p><code class=\"codespan\">zlevel</code> value of all graphical elements in .</p>\n<p><code class=\"codespan\">zlevel</code> is used to make layers with Canvas. Graphical elements with different <code class=\"codespan\">zlevel</code> values will be placed in different Canvases, which is a common optimization technique. We can put those frequently changed elements (like those with animations) to a separate <code class=\"codespan\">zlevel</code>. Notice that too many Canvases will increase memory cost, and should be used carefully on mobile phones to avoid crash.</p>\n<p>Canvases with bigger <code class=\"codespan\">zlevel</code> will be placed on Canvases with smaller <code class=\"codespan\">zlevel</code>.</p>\n" |
| }, |
| "z": { |
| "desc": "<p><code class=\"codespan\">z</code> value of all graphical elements in , which controls order of drawing graphical components. Components with smaller <code class=\"codespan\">z</code> values may be overwritten by those with larger <code class=\"codespan\">z</code> values.</p>\n<p><code class=\"codespan\">z</code> has a lower priority to <code class=\"codespan\">zlevel</code>, and will not create new Canvas.</p>\n" |
| }, |
| "center": { |
| "desc": "\n\n<p>Center position of , the first of which is the horizontal position, and the second is the vertical position.</p>\n<p>Percentage is supported. When set in percentage, the item is relative to the container width, and the second item to the height.</p>\n<p><strong>Example: </strong></p>\n<pre><code>// Set to absolute pixel values\ncenter: [400, 300]\n// Set to relative percent\ncenter: ['50%', '50%']\n</code></pre>", |
| "uiControl": { |
| "type": "percentvector", |
| "dims": "x,y" |
| } |
| }, |
| "radius": { |
| "desc": "\n\n<p>Radius of . Value can be:</p>\n<ul>\n<li><code class=\"codespan\">number</code>: Specify outside radius directly.</li>\n<li><code class=\"codespan\">string</code>: For example, <code class=\"codespan\">'20%'</code>, means that the outside radius is 20% of the viewport size (the little one between width and height of the chart container).</li>\n</ul>\n<ul>\n<li><code class=\"codespan\">Array.<number|string></code>: The first item specifies the inside radius, and the second item specifies the outside radius. Each item follows the definitions above.</li>\n</ul>\n", |
| "uiControl": { |
| "type": "percentvector", |
| "dims": "inner,outer", |
| "default": "0%, 75%" |
| } |
| }, |
| "startAngle": { |
| "desc": "<p>The start angle of coordinate, which is the angle of the first indicator axis.</p>\n" |
| }, |
| "name": { |
| "desc": "<p>Name of radar chart.</p>\n" |
| }, |
| "name.show": { |
| "desc": "<p>Whether to display the indicator's name.</p>\n" |
| }, |
| "name.formatter": { |
| "desc": "<p>The formatter of indicator's name, in which the string and callback function are supported. See the following example:</p>\n<pre><code class=\"lang-js\">// using string template, the template variable should be the indicator's name {value}\nformatter: '【{value}】'\n// using callback function, the first parameter is the indicator's name, and the second parameter id the indicator's cinfiguration item\nformatter: function (value, indicator) {\n return '【' + value + '】';\n}\n</code></pre>\n" |
| }, |
| "name.color": { |
| "desc": "\n\n<p> text color.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "'#333'" |
| } |
| }, |
| "name.fontStyle": { |
| "desc": "\n\n<p> font style.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'normal'</code></li>\n<li><code class=\"codespan\">'italic'</code></li>\n<li><code class=\"codespan\">'oblique'</code></li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "normal", |
| "options": "normal,italic,oblique" |
| } |
| }, |
| "name.fontWeight": { |
| "desc": "\n\n<p> font thick weight.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'normal'</code></li>\n<li><code class=\"codespan\">'bold'</code></li>\n<li><code class=\"codespan\">'bolder'</code></li>\n<li><code class=\"codespan\">'lighter'</code></li>\n<li>100 | 200 | 300 | 400...</li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "normal", |
| "options": "normal,bold,bolder,lighter" |
| } |
| }, |
| "name.fontFamily": { |
| "desc": "\n\n<p> font family.</p>\n<p>Can also be 'serif' , 'monospace', ...</p>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "sans-serif", |
| "options": "sans-serif,serif,monospace,Arial,Courier New" |
| } |
| }, |
| "name.fontSize": { |
| "desc": "\n\n<p> font size.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "12", |
| "min": "1", |
| "step": "1" |
| } |
| }, |
| "name.lineHeight": { |
| "desc": "\n\n<p>Line height of the text fragment.</p>\n<p>If <code class=\"codespan\">lineHeight</code> is not set in <code class=\"codespan\">rich</code>, <code class=\"codespan\">lineHeight</code> in parent level will be used. For example:</p>\n<pre><code class=\"lang-js\">{\n lineHeight: 56,\n rich: {\n a: {\n // `lineHeight` is not set, then it will be 56\n }\n }\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "1", |
| "default": "12" |
| } |
| }, |
| "name.backgroundColor": { |
| "desc": "\n\n<p>Background color of the text fragment.</p>\n<p>Can be color string, like <code class=\"codespan\">'#123234'</code>, <code class=\"codespan\">'red'</code>, <code class=\"codespan\">'rgba(0,23,11,0.3)'</code>.</p>\n<p>Or image can be used, for example:</p>\n<pre><code class=\"lang-js\">backgroundColor: {\n image: 'xxx/xxx.png'\n // It can be URL of a image,\n // or dataURI,\n // or HTMLImageElement,\n // or HTMLCanvasElement.\n}\n</code></pre>\n<p><code class=\"codespan\">width</code> or <code class=\"codespan\">height</code> can be specified when using background image, or\nauto adapted by default.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#fff" |
| } |
| }, |
| "name.borderColor": { |
| "desc": "\n\n<p>Border color of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#fff" |
| } |
| }, |
| "name.borderWidth": { |
| "desc": "\n\n<p>Border width of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "name.borderRadius": { |
| "desc": "\n\n<p>Border radius of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "vector", |
| "min": "0", |
| "dims": "LT,RT, RB, LB" |
| } |
| }, |
| "name.padding": { |
| "desc": "\n\n<p>Padding of the text fragment, for example:</p>\n<ul>\n<li><code class=\"codespan\">padding: [3, 4, 5, 6]</code>: represents padding of <code class=\"codespan\">[top, right, bottom, left]</code>.</li>\n<li><code class=\"codespan\">padding: 4</code>: represents <code class=\"codespan\">padding: [4, 4, 4, 4]</code>.</li>\n<li><code class=\"codespan\">padding: [3, 4]</code>: represents <code class=\"codespan\">padding: [3, 4, 3, 4]</code>.</li>\n</ul>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> specifies the width and height of the content, without <code class=\"codespan\">padding</code>.</p>\n", |
| "uiControl": { |
| "type": "vector", |
| "min": "0", |
| "dims": "T,R,B,L" |
| } |
| }, |
| "name.shadowColor": { |
| "desc": "\n\n<p>Shadow color of the text block.</p>\n", |
| "uiControl": { |
| "type": "color" |
| } |
| }, |
| "name.shadowBlur": { |
| "desc": "\n\n<p>Show blur of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "name.shadowOffsetX": { |
| "desc": "\n\n<p>Shadow X offset of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "name.shadowOffsetY": { |
| "desc": "\n\n<p>Shadow Y offset of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "name.width": { |
| "desc": "\n\n<p>Width of text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "50", |
| "min": "1", |
| "max": "200", |
| "step": "1" |
| } |
| }, |
| "name.height": { |
| "desc": "\n\n<p>Height of text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "50", |
| "min": "1", |
| "max": "200", |
| "step": "1" |
| } |
| }, |
| "name.textBorderColor": { |
| "desc": "\n\n<p>Storke color of the text.</p>\n", |
| "uiControl": { |
| "type": "color" |
| } |
| }, |
| "name.textBorderWidth": { |
| "desc": "\n\n<p>Storke line width of the text.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "name.textShadowColor": { |
| "desc": "\n\n<p>Shadow color of the text itself.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#000" |
| } |
| }, |
| "name.textShadowBlur": { |
| "desc": "\n\n<p>Shadow blue of the text itself.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "name.textShadowOffsetX": { |
| "desc": "\n\n<p>Shadow X offset of the text itself.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "name.textShadowOffsetY": { |
| "desc": "\n\n<p>Shadow Y offset of the text itself.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "name.overflow": { |
| "desc": "\n\n<p>Determine how to display the text when it's overflow. Available when <code class=\"codespan\">width</code> is set.</p>\n<ul>\n<li><code class=\"codespan\">'truncate'</code> Truncate the text and trailing with <code class=\"codespan\">ellipsis</code>.</li>\n<li><code class=\"codespan\">'break'</code> Break by word</li>\n<li><code class=\"codespan\">'breakAll'</code> Break by character.</li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "options": "truncate,break,breakAll" |
| } |
| }, |
| "name.ellipsis": { |
| "desc": "<p>Ellipsis to be displayed when <code class=\"codespan\">overflow</code> is set to <code class=\"codespan\">truncate</code>.</p>\n" |
| }, |
| "name.lineOverflow": { |
| "desc": "<p>Determine how to display the text when it's overflow on height.</p>\n<ul>\n<li><code class=\"codespan\">'truncate'</code> Truncate the overflow lines.</li>\n</ul>\n" |
| }, |
| "name.rich": { |
| "desc": "<p>"Rich text styles" can be defined in this <code class=\"codespan\">rich</code> property. For example:</p>\n<pre><code class=\"lang-js\">label: {\n // Styles defined in 'rich' can be applied to some fragments\n // of text by adding some markers to those fragment, like\n // `{styleName|text content text content}`.\n // `'\\n'` is the newline character.\n formatter: [\n '{a|Style "a" is applied to this snippet}'\n '{b|Style "b" is applied to this snippet}This snippet use default style{x|use style "x"}'\n ].join('\\n'),\n\n rich: {\n a: {\n color: 'red',\n lineHeight: 10\n },\n b: {\n backgroundColor: {\n image: 'xxx/xxx.jpg'\n },\n height: 40\n },\n x: {\n fontSize: 18,\n fontFamily: 'Microsoft YaHei',\n borderColor: '#449933',\n borderRadius: 4\n },\n ...\n }\n}\n</code></pre>\n<p>For more details, see <a href=\"tutorial.html#Rich%20Text\" target=\"_blank\">Rich Text</a> please.</p>\n" |
| }, |
| "name.rich.<style_name>.color": { |
| "desc": "\n\n<p> text color.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "null" |
| } |
| }, |
| "name.rich.<style_name>.fontStyle": { |
| "desc": "\n\n<p> font style.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'normal'</code></li>\n<li><code class=\"codespan\">'italic'</code></li>\n<li><code class=\"codespan\">'oblique'</code></li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "normal", |
| "options": "normal,italic,oblique" |
| } |
| }, |
| "name.rich.<style_name>.fontWeight": { |
| "desc": "\n\n<p> font thick weight.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'normal'</code></li>\n<li><code class=\"codespan\">'bold'</code></li>\n<li><code class=\"codespan\">'bolder'</code></li>\n<li><code class=\"codespan\">'lighter'</code></li>\n<li>100 | 200 | 300 | 400...</li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "normal", |
| "options": "normal,bold,bolder,lighter" |
| } |
| }, |
| "name.rich.<style_name>.fontFamily": { |
| "desc": "\n\n<p> font family.</p>\n<p>Can also be 'serif' , 'monospace', ...</p>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "sans-serif", |
| "options": "sans-serif,serif,monospace,Arial,Courier New" |
| } |
| }, |
| "name.rich.<style_name>.fontSize": { |
| "desc": "\n\n<p> font size.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "12", |
| "min": "1", |
| "step": "1" |
| } |
| }, |
| "name.rich.<style_name>.align": { |
| "desc": "\n\n<p>Horizontal alignment of text, automatic by default.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'left'</code></li>\n<li><code class=\"codespan\">'center'</code></li>\n<li><code class=\"codespan\">'right'</code></li>\n</ul>\n<p>If <code class=\"codespan\">align</code> is not set in <code class=\"codespan\">rich</code>, <code class=\"codespan\">align</code> in parent level will be used. For example:</p>\n<pre><code class=\"lang-js\">{\n align: right,\n rich: {\n a: {\n // `align` is not set, then it will be right\n }\n }\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "enum", |
| "options": "left,center,right" |
| } |
| }, |
| "name.rich.<style_name>.verticalAlign": { |
| "desc": "\n\n<p>Vertical alignment of text, automatic by default.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'top'</code></li>\n<li><code class=\"codespan\">'middle'</code></li>\n<li><code class=\"codespan\">'bottom'</code></li>\n</ul>\n<p>If <code class=\"codespan\">verticalAlign</code> is not set in <code class=\"codespan\">rich</code>, <code class=\"codespan\">verticalAlign</code> in parent level will be used. For example:</p>\n<pre><code class=\"lang-js\">{\n verticalAlign: bottom,\n rich: {\n a: {\n // `verticalAlign` is not set, then it will be bottom\n }\n }\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "enum", |
| "options": "top,middle,bottom" |
| } |
| }, |
| "name.rich.<style_name>.lineHeight": { |
| "desc": "\n\n<p>Line height of the text fragment.</p>\n<p>If <code class=\"codespan\">lineHeight</code> is not set in <code class=\"codespan\">rich</code>, <code class=\"codespan\">lineHeight</code> in parent level will be used. For example:</p>\n<pre><code class=\"lang-js\">{\n lineHeight: 56,\n rich: {\n a: {\n // `lineHeight` is not set, then it will be 56\n }\n }\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "1", |
| "default": "12" |
| } |
| }, |
| "name.rich.<style_name>.backgroundColor": { |
| "desc": "\n\n<p>Background color of the text fragment.</p>\n<p>Can be color string, like <code class=\"codespan\">'#123234'</code>, <code class=\"codespan\">'red'</code>, <code class=\"codespan\">'rgba(0,23,11,0.3)'</code>.</p>\n<p>Or image can be used, for example:</p>\n<pre><code class=\"lang-js\">backgroundColor: {\n image: 'xxx/xxx.png'\n // It can be URL of a image,\n // or dataURI,\n // or HTMLImageElement,\n // or HTMLCanvasElement.\n}\n</code></pre>\n<p><code class=\"codespan\">width</code> or <code class=\"codespan\">height</code> can be specified when using background image, or\nauto adapted by default.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#fff" |
| } |
| }, |
| "name.rich.<style_name>.borderColor": { |
| "desc": "\n\n<p>Border color of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#fff" |
| } |
| }, |
| "name.rich.<style_name>.borderWidth": { |
| "desc": "\n\n<p>Border width of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "name.rich.<style_name>.borderRadius": { |
| "desc": "\n\n<p>Border radius of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "vector", |
| "min": "0", |
| "dims": "LT,RT, RB, LB" |
| } |
| }, |
| "name.rich.<style_name>.padding": { |
| "desc": "\n\n<p>Padding of the text fragment, for example:</p>\n<ul>\n<li><code class=\"codespan\">padding: [3, 4, 5, 6]</code>: represents padding of <code class=\"codespan\">[top, right, bottom, left]</code>.</li>\n<li><code class=\"codespan\">padding: 4</code>: represents <code class=\"codespan\">padding: [4, 4, 4, 4]</code>.</li>\n<li><code class=\"codespan\">padding: [3, 4]</code>: represents <code class=\"codespan\">padding: [3, 4, 3, 4]</code>.</li>\n</ul>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> specifies the width and height of the content, without <code class=\"codespan\">padding</code>.</p>\n", |
| "uiControl": { |
| "type": "vector", |
| "min": "0", |
| "dims": "T,R,B,L" |
| } |
| }, |
| "name.rich.<style_name>.shadowColor": { |
| "desc": "\n\n<p>Shadow color of the text block.</p>\n", |
| "uiControl": { |
| "type": "color" |
| } |
| }, |
| "name.rich.<style_name>.shadowBlur": { |
| "desc": "\n\n<p>Show blur of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "name.rich.<style_name>.shadowOffsetX": { |
| "desc": "\n\n<p>Shadow X offset of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "name.rich.<style_name>.shadowOffsetY": { |
| "desc": "\n\n<p>Shadow Y offset of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "name.rich.<style_name>.width": { |
| "desc": "<p>Width of the text block. It is the width of the text by default. In most cases, there is no need to specify it. You may want to use it in some cases like make simple table or using background image (see <code class=\"codespan\">backgroundColor</code>).</p>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> specifies the width and height of the content, without <code class=\"codespan\">padding</code>.</p>\n<p><code class=\"codespan\">width</code> can also be percent string, like <code class=\"codespan\">'100%'</code>, which represents the percent of <code class=\"codespan\">contentWidth</code> (that is, the width without <code class=\"codespan\">padding</code>) of its container box. It is based on <code class=\"codespan\">contentWidth</code> because that each text fragment is layout based on the <code class=\"codespan\">content box</code>, where it makes no sense that calculating width based on <code class=\"codespan\">outerWith</code> in prectice.</p>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> only work when <code class=\"codespan\">rich</code> specified.</p>\n" |
| }, |
| "name.rich.<style_name>.height": { |
| "desc": "<p>Height of the text block. It is the width of the text by default. You may want to use it in some cases like using background image (see <code class=\"codespan\">backgroundColor</code>).</p>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> specifies the width and height of the content, without <code class=\"codespan\">padding</code>.</p>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> only work when <code class=\"codespan\">rich</code> specified.</p>\n" |
| }, |
| "name.rich.<style_name>.textBorderColor": { |
| "desc": "\n\n<p>Storke color of the text.</p>\n", |
| "uiControl": { |
| "type": "color" |
| } |
| }, |
| "name.rich.<style_name>.textBorderWidth": { |
| "desc": "\n\n<p>Storke line width of the text.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "name.rich.<style_name>.textShadowColor": { |
| "desc": "\n\n<p>Shadow color of the text itself.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#000" |
| } |
| }, |
| "name.rich.<style_name>.textShadowBlur": { |
| "desc": "\n\n<p>Shadow blue of the text itself.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "name.rich.<style_name>.textShadowOffsetX": { |
| "desc": "\n\n<p>Shadow X offset of the text itself.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "name.rich.<style_name>.textShadowOffsetY": { |
| "desc": "\n\n<p>Shadow Y offset of the text itself.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "nameGap": { |
| "desc": "\n\n<p>Distance between the indicator's name and axis.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "15", |
| "step": "1" |
| } |
| }, |
| "splitNumber": { |
| "desc": "\n\n<p>Segments of indicator axis.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "15", |
| "step": "1" |
| } |
| }, |
| "shape": { |
| "desc": "\n\n<p>Radar render type, in which <code class=\"codespan\">'polygon'</code> and <code class=\"codespan\">'circle'</code> are supported.</p>\n", |
| "uiControl": { |
| "type": "enum", |
| "options": "polygon,circle" |
| } |
| }, |
| "scale": { |
| "desc": "\n\n<p>Whether to prevent calculating the scaling relative to zero. If it is set to be <code class=\"codespan\">true</code>, the coordinate tick would not compulsorily contain zero value, which is usually useful in scatter diagram of double numerical values axis.</p>\n", |
| "uiControl": { |
| "type": "boolean" |
| } |
| }, |
| "silent": { |
| "desc": "<p>Set this to <code class=\"codespan\">true</code>, to prevent interaction with the axis.</p>\n" |
| }, |
| "triggerEvent": { |
| "desc": "<p>Set this to <code class=\"codespan\">true</code> to enable triggering events.</p>\n<p>Parameters of the event include:</p>\n<pre><code class=\"lang-js\">{\n // Component type: xAxis, yAxis, radiusAxis, angleAxis\n // Each of which has an attribute for index, e.g., xAxisIndex for xAxis\n componentType: string,\n // Value on axis before being formatted.\n // Click on value label to trigger event.\n value: '',\n // Name of axis.\n // Click on laben name to trigger event.\n name: ''\n}\n</code></pre>\n" |
| }, |
| "axisLine": { |
| "desc": "<p>Settings related to axis line.</p>\n" |
| }, |
| "axisLine.show": { |
| "desc": "\n\n<p>Set this to <code class=\"codespan\">false</code> to prevent the axis line from showing.</p>\n", |
| "uiControl": { |
| "type": "boolean", |
| "default": "true" |
| } |
| }, |
| "axisLine.symbol": { |
| "desc": "\n\n<p>Symbol of the two ends of the axis. It could be a string, representing the same symbol for two ends; or an array with two string elements, representing the two ends separately. It's set to be <code class=\"codespan\">'none'</code> by default, meaning no arrow for either end. If it is set to be <code class=\"codespan\">'arrow'</code>, there shall be two arrows. If there should only one arrow at the end, it should set to be <code class=\"codespan\">['none', 'arrow']</code>.</p>\n", |
| "uiControl": { |
| "type": "icon", |
| "default": "none" |
| } |
| }, |
| "axisLine.symbolSize": { |
| "desc": "\n\n<p>Size of the arrows at two ends. The first is the width perpendicular to the axis, the next is the width parallel to the axis.</p>\n", |
| "uiControl": { |
| "type": "vector", |
| "default": "10,15" |
| } |
| }, |
| "axisLine.symbolOffset": { |
| "desc": "\n\n<p>Arrow offset of axis. If is array, the first number is the offset of the arrow at the beginning, and the second number is the offset of the arrow at the end. If is number, it means the arrows have the same offset.</p>\n", |
| "uiControl": { |
| "type": "vector", |
| "default": "0,0" |
| } |
| }, |
| "axisLine.lineStyle.color": { |
| "desc": "\n\n<p>line styleLine color. </p>\n<blockquote>\n<p>Color can be represented in RGB, for example <code class=\"codespan\">'rgb(128, 128, 128)'</code>. RGBA can be used when you need alpha channel, for example <code class=\"codespan\">'rgba(128, 128, 128, 0.5)'</code>. You may also use hexadecimal format, for example <code class=\"codespan\">'#ccc'</code>. Gradient color and texture are also supported besides single colors.</p>\n<pre><code class=\"lang-js\">// Linear gradient. First four parameters are x0, y0, x2, and y2, each ranged from 0 to 1, standing for percentage in the bounding box. If global is `true`, then the first four parameters are in absolute pixel positions.\ncolor: {\n type: 'linear',\n x: 0,\n y: 0,\n x2: 0,\n y2: 1,\n colorStops: [{\n offset: 0, color: 'red' // color at 0% position\n }, {\n offset: 1, color: 'blue' // color at 100% position\n }],\n global: false // false by default\n}\n// Radial gradient. First three parameters are x and y positions of center, and radius, similar to linear gradient.\ncolor: {\n type: 'radial',\n x: 0.5,\n y: 0.5,\n r: 0.5,\n colorStops: [{\n offset: 0, color: 'red' // color at 0% position\n }, {\n offset: 1, color: 'blue' // color at 100% position\n }],\n global: false // false by default\n}\n// Fill with texture\ncolor: {\n image: imageDom, // HTMLImageElement, and HTMLCanvasElement are supported, while string path is not supported\n repeat: 'repeat' // whether to repeat texture, whose value can be repeat-x, repeat-y, or no-repeat\n}\n</code></pre>\n</blockquote>\n", |
| "uiControl": { |
| "type": "color" |
| } |
| }, |
| "axisLine.lineStyle.width": { |
| "desc": "\n\n<p>line style line width.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "value": "1", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLine.lineStyle.type": { |
| "desc": "\n\n<p>line style line type.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'solid'</code></li>\n<li><code class=\"codespan\">'dashed'</code></li>\n<li><code class=\"codespan\">'dotted'</code></li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "solid", |
| "options": "solid,dashed,dotted" |
| } |
| }, |
| "axisLine.lineStyle.shadowBlur": { |
| "desc": "\n\n<p>Size of shadow blur. This attribute should be used along with <code class=\"codespan\">shadowColor</code>,<code class=\"codespan\">shadowOffsetX</code>, <code class=\"codespan\">shadowOffsetY</code> to set shadow to component.</p>\n<p>For example:</p>\n<pre><code class=\"lang-js\">{\n shadowColor: 'rgba(0, 0, 0, 0.5)',\n shadowBlur: 10\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLine.lineStyle.shadowColor": { |
| "desc": "\n\n<p>Shadow color. Support same format as <code class=\"codespan\">color</code>.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "" |
| } |
| }, |
| "axisLine.lineStyle.shadowOffsetX": { |
| "desc": "\n\n<p>Offset distance on the horizontal direction of shadow.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLine.lineStyle.shadowOffsetY": { |
| "desc": "\n\n<p>Offset distance on the vertical direction of shadow.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLine.lineStyle.opacity": { |
| "desc": "\n\n<p>Opacity of the component. Supports value from 0 to 1, and the component will not be drawn when set to 0.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "1", |
| "min": "0", |
| "max": "1", |
| "step": "0.01" |
| } |
| }, |
| "axisTick": { |
| "desc": "<p>Settings related to axis tick.</p>\n" |
| }, |
| "axisTick.show": { |
| "desc": "\n\n<p>Set this to <code class=\"codespan\">false</code> to prevent the axis tick from showing.</p>\n", |
| "uiControl": { |
| "type": "boolean", |
| "default": "true" |
| } |
| }, |
| "axisTick.length": { |
| "desc": "\n\n<p>The length of the axis tick.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5", |
| "default": "5" |
| } |
| }, |
| "axisTick.lineStyle": { |
| "desc": "<p>Line style of axis ticks.</p>\n" |
| }, |
| "axisTick.lineStyle.color": { |
| "desc": "<p>Color of axis label is set to be <a href=\"#.axisLine.lineStyle.color\">axisLine.lineStyle.color</a> by default.</p>\n" |
| }, |
| "axisTick.lineStyle.width": { |
| "desc": "\n\n<p>axisTick line width.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "value": "1", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisTick.lineStyle.type": { |
| "desc": "\n\n<p>axisTick line type.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'solid'</code></li>\n<li><code class=\"codespan\">'dashed'</code></li>\n<li><code class=\"codespan\">'dotted'</code></li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "solid", |
| "options": "solid,dashed,dotted" |
| } |
| }, |
| "axisTick.lineStyle.shadowBlur": { |
| "desc": "\n\n<p>Size of shadow blur. This attribute should be used along with <code class=\"codespan\">shadowColor</code>,<code class=\"codespan\">shadowOffsetX</code>, <code class=\"codespan\">shadowOffsetY</code> to set shadow to component.</p>\n<p>For example:</p>\n<pre><code class=\"lang-js\">{\n shadowColor: 'rgba(0, 0, 0, 0.5)',\n shadowBlur: 10\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisTick.lineStyle.shadowColor": { |
| "desc": "\n\n<p>Shadow color. Support same format as <code class=\"codespan\">color</code>.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "" |
| } |
| }, |
| "axisTick.lineStyle.shadowOffsetX": { |
| "desc": "\n\n<p>Offset distance on the horizontal direction of shadow.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisTick.lineStyle.shadowOffsetY": { |
| "desc": "\n\n<p>Offset distance on the vertical direction of shadow.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisTick.lineStyle.opacity": { |
| "desc": "\n\n<p>Opacity of the component. Supports value from 0 to 1, and the component will not be drawn when set to 0.</p>\n\n", |
| "uiControl": { |
| "type": "number", |
| "default": "1", |
| "min": "0", |
| "max": "1", |
| "step": "0.01" |
| } |
| }, |
| "axisLabel": { |
| "desc": "<p>Settings related to axis label.</p>\n" |
| }, |
| "axisLabel.show": { |
| "desc": "\n\n<p>Set this to <code class=\"codespan\">false</code> to prevent the axis label from appearing.</p>\n", |
| "uiControl": { |
| "type": "boolean", |
| "default": "true" |
| } |
| }, |
| "axisLabel.rotate": { |
| "desc": "\n\n<p>Rotation degree of axis label, which is especially useful when there is no enough space for category axis.</p>\n<p>Rotation degree is from -90 to 90.</p>\n", |
| "uiControl": { |
| "type": "angle", |
| "min": "-90", |
| "max": "90", |
| "step": "1" |
| } |
| }, |
| "axisLabel.margin": { |
| "desc": "\n\n<p>The margin between the axis label and the axis line.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "8", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.formatter": { |
| "desc": "<p>Formatter of axis label, which supports string template and callback function.</p>\n<p>Example:</p>\n<pre><code class=\"lang-js\">// Use string template; template variable is the default label of axis {value}\nformatter: '{value} kg'\n\n// Use callback function; function parameters are axis index\nformatter: function (value, index) {\n // Formatted to be month/day; display year only in the first label\n var date = new Date(value);\n var texts = [(date.getMonth() + 1), date.getDate()];\n if (idx === 0) {\n texts.unshift(date.getYear());\n }\n return texts.join('/');\n}\n</code></pre>\n" |
| }, |
| "axisLabel.showMinLabel": { |
| "desc": "\n\n<p>Whether to show the label of the min tick. Optional values: <code class=\"codespan\">true</code>, <code class=\"codespan\">false</code>, <code class=\"codespan\">null</code>. It is auto determined by default, that is, if labels are overlapped, the label of the min tick will not be displayed.</p>\n", |
| "uiControl": { |
| "type": "boolean" |
| } |
| }, |
| "axisLabel.showMaxLabel": { |
| "desc": "\n\n<p>Whether to show the label of the max tick. Optional values: <code class=\"codespan\">true</code>, <code class=\"codespan\">false</code>, <code class=\"codespan\">null</code>. It is auto determined by default, that is, if labels are overlapped, the label of the max tick will not be displayed.</p>\n", |
| "uiControl": { |
| "type": "boolean" |
| } |
| }, |
| "axisLabel.color": { |
| "desc": "\n\n<p>Color of axis label is set to be <a href=\"#.axisLine.lineStyle.color\">axisLine.lineStyle.color</a> by default. Callback function is supported, in the following format:</p>\n<pre><code class=\"lang-js\">(val: string) => Color\n</code></pre>\n<p>Parameter is the text of label, and return value is the color. See the following example:</p>\n<pre><code class=\"lang-js\">textStyle: {\n color: function (value, index) {\n return value >= 0 ? 'green' : 'red';\n }\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "color" |
| } |
| }, |
| "axisLabel.fontStyle": { |
| "desc": "\n\n<p> font style.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'normal'</code></li>\n<li><code class=\"codespan\">'italic'</code></li>\n<li><code class=\"codespan\">'oblique'</code></li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "normal", |
| "options": "normal,italic,oblique" |
| } |
| }, |
| "axisLabel.fontWeight": { |
| "desc": "\n\n<p> font thick weight.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'normal'</code></li>\n<li><code class=\"codespan\">'bold'</code></li>\n<li><code class=\"codespan\">'bolder'</code></li>\n<li><code class=\"codespan\">'lighter'</code></li>\n<li>100 | 200 | 300 | 400...</li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "normal", |
| "options": "normal,bold,bolder,lighter" |
| } |
| }, |
| "axisLabel.fontFamily": { |
| "desc": "\n\n<p> font family.</p>\n<p>Can also be 'serif' , 'monospace', ...</p>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "sans-serif", |
| "options": "sans-serif,serif,monospace,Arial,Courier New" |
| } |
| }, |
| "axisLabel.fontSize": { |
| "desc": "\n\n<p> font size.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "12", |
| "min": "1", |
| "step": "1" |
| } |
| }, |
| "axisLabel.align": { |
| "desc": "\n\n<p>Horizontal alignment of text, automatic by default.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'left'</code></li>\n<li><code class=\"codespan\">'center'</code></li>\n<li><code class=\"codespan\">'right'</code></li>\n</ul>\n<p>If <code class=\"codespan\">align</code> is not set in <code class=\"codespan\">rich</code>, <code class=\"codespan\">align</code> in parent level will be used. For example:</p>\n<pre><code class=\"lang-js\">{\n align: right,\n rich: {\n a: {\n // `align` is not set, then it will be right\n }\n }\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "enum", |
| "options": "left,center,right" |
| } |
| }, |
| "axisLabel.verticalAlign": { |
| "desc": "\n\n<p>Vertical alignment of text, automatic by default.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'top'</code></li>\n<li><code class=\"codespan\">'middle'</code></li>\n<li><code class=\"codespan\">'bottom'</code></li>\n</ul>\n<p>If <code class=\"codespan\">verticalAlign</code> is not set in <code class=\"codespan\">rich</code>, <code class=\"codespan\">verticalAlign</code> in parent level will be used. For example:</p>\n<pre><code class=\"lang-js\">{\n verticalAlign: bottom,\n rich: {\n a: {\n // `verticalAlign` is not set, then it will be bottom\n }\n }\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "enum", |
| "options": "top,middle,bottom" |
| } |
| }, |
| "axisLabel.lineHeight": { |
| "desc": "\n\n<p>Line height of the text fragment.</p>\n<p>If <code class=\"codespan\">lineHeight</code> is not set in <code class=\"codespan\">rich</code>, <code class=\"codespan\">lineHeight</code> in parent level will be used. For example:</p>\n<pre><code class=\"lang-js\">{\n lineHeight: 56,\n rich: {\n a: {\n // `lineHeight` is not set, then it will be 56\n }\n }\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "1", |
| "default": "12" |
| } |
| }, |
| "axisLabel.backgroundColor": { |
| "desc": "\n\n<p>Background color of the text fragment.</p>\n<p>Can be color string, like <code class=\"codespan\">'#123234'</code>, <code class=\"codespan\">'red'</code>, <code class=\"codespan\">'rgba(0,23,11,0.3)'</code>.</p>\n<p>Or image can be used, for example:</p>\n<pre><code class=\"lang-js\">backgroundColor: {\n image: 'xxx/xxx.png'\n // It can be URL of a image,\n // or dataURI,\n // or HTMLImageElement,\n // or HTMLCanvasElement.\n}\n</code></pre>\n<p><code class=\"codespan\">width</code> or <code class=\"codespan\">height</code> can be specified when using background image, or\nauto adapted by default.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#fff" |
| } |
| }, |
| "axisLabel.borderColor": { |
| "desc": "\n\n<p>Border color of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#fff" |
| } |
| }, |
| "axisLabel.borderWidth": { |
| "desc": "\n\n<p>Border width of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.borderRadius": { |
| "desc": "\n\n<p>Border radius of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "vector", |
| "min": "0", |
| "dims": "LT,RT, RB, LB" |
| } |
| }, |
| "axisLabel.padding": { |
| "desc": "\n\n<p>Padding of the text fragment, for example:</p>\n<ul>\n<li><code class=\"codespan\">padding: [3, 4, 5, 6]</code>: represents padding of <code class=\"codespan\">[top, right, bottom, left]</code>.</li>\n<li><code class=\"codespan\">padding: 4</code>: represents <code class=\"codespan\">padding: [4, 4, 4, 4]</code>.</li>\n<li><code class=\"codespan\">padding: [3, 4]</code>: represents <code class=\"codespan\">padding: [3, 4, 3, 4]</code>.</li>\n</ul>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> specifies the width and height of the content, without <code class=\"codespan\">padding</code>.</p>\n", |
| "uiControl": { |
| "type": "vector", |
| "min": "0", |
| "dims": "T,R,B,L" |
| } |
| }, |
| "axisLabel.shadowColor": { |
| "desc": "\n\n<p>Shadow color of the text block.</p>\n", |
| "uiControl": { |
| "type": "color" |
| } |
| }, |
| "axisLabel.shadowBlur": { |
| "desc": "\n\n<p>Show blur of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.shadowOffsetX": { |
| "desc": "\n\n<p>Shadow X offset of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.shadowOffsetY": { |
| "desc": "\n\n<p>Shadow Y offset of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.width": { |
| "desc": "\n\n<p>Width of text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "50", |
| "min": "1", |
| "max": "200", |
| "step": "1" |
| } |
| }, |
| "axisLabel.height": { |
| "desc": "\n\n<p>Height of text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "50", |
| "min": "1", |
| "max": "200", |
| "step": "1" |
| } |
| }, |
| "axisLabel.textBorderColor": { |
| "desc": "\n\n<p>Storke color of the text.</p>\n", |
| "uiControl": { |
| "type": "color" |
| } |
| }, |
| "axisLabel.textBorderWidth": { |
| "desc": "\n\n<p>Storke line width of the text.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.textShadowColor": { |
| "desc": "\n\n<p>Shadow color of the text itself.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#000" |
| } |
| }, |
| "axisLabel.textShadowBlur": { |
| "desc": "\n\n<p>Shadow blue of the text itself.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.textShadowOffsetX": { |
| "desc": "\n\n<p>Shadow X offset of the text itself.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.textShadowOffsetY": { |
| "desc": "\n\n<p>Shadow Y offset of the text itself.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.overflow": { |
| "desc": "\n\n<p>Determine how to display the text when it's overflow. Available when <code class=\"codespan\">width</code> is set.</p>\n<ul>\n<li><code class=\"codespan\">'truncate'</code> Truncate the text and trailing with <code class=\"codespan\">ellipsis</code>.</li>\n<li><code class=\"codespan\">'break'</code> Break by word</li>\n<li><code class=\"codespan\">'breakAll'</code> Break by character.</li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "options": "truncate,break,breakAll" |
| } |
| }, |
| "axisLabel.ellipsis": { |
| "desc": "<p>Ellipsis to be displayed when <code class=\"codespan\">overflow</code> is set to <code class=\"codespan\">truncate</code>.</p>\n" |
| }, |
| "axisLabel.lineOverflow": { |
| "desc": "<p>Determine how to display the text when it's overflow on height.</p>\n<ul>\n<li><code class=\"codespan\">'truncate'</code> Truncate the overflow lines.</li>\n</ul>\n" |
| }, |
| "axisLabel.rich": { |
| "desc": "<p>"Rich text styles" can be defined in this <code class=\"codespan\">rich</code> property. For example:</p>\n<pre><code class=\"lang-js\">label: {\n // Styles defined in 'rich' can be applied to some fragments\n // of text by adding some markers to those fragment, like\n // `{styleName|text content text content}`.\n // `'\\n'` is the newline character.\n formatter: [\n '{a|Style "a" is applied to this snippet}'\n '{b|Style "b" is applied to this snippet}This snippet use default style{x|use style "x"}'\n ].join('\\n'),\n\n rich: {\n a: {\n color: 'red',\n lineHeight: 10\n },\n b: {\n backgroundColor: {\n image: 'xxx/xxx.jpg'\n },\n height: 40\n },\n x: {\n fontSize: 18,\n fontFamily: 'Microsoft YaHei',\n borderColor: '#449933',\n borderRadius: 4\n },\n ...\n }\n}\n</code></pre>\n<p>For more details, see <a href=\"tutorial.html#Rich%20Text\" target=\"_blank\">Rich Text</a> please.</p>\n" |
| }, |
| "axisLabel.rich.<style_name>.color": { |
| "desc": "\n\n<p> text color.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "null" |
| } |
| }, |
| "axisLabel.rich.<style_name>.fontStyle": { |
| "desc": "\n\n<p> font style.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'normal'</code></li>\n<li><code class=\"codespan\">'italic'</code></li>\n<li><code class=\"codespan\">'oblique'</code></li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "normal", |
| "options": "normal,italic,oblique" |
| } |
| }, |
| "axisLabel.rich.<style_name>.fontWeight": { |
| "desc": "\n\n<p> font thick weight.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'normal'</code></li>\n<li><code class=\"codespan\">'bold'</code></li>\n<li><code class=\"codespan\">'bolder'</code></li>\n<li><code class=\"codespan\">'lighter'</code></li>\n<li>100 | 200 | 300 | 400...</li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "normal", |
| "options": "normal,bold,bolder,lighter" |
| } |
| }, |
| "axisLabel.rich.<style_name>.fontFamily": { |
| "desc": "\n\n<p> font family.</p>\n<p>Can also be 'serif' , 'monospace', ...</p>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "sans-serif", |
| "options": "sans-serif,serif,monospace,Arial,Courier New" |
| } |
| }, |
| "axisLabel.rich.<style_name>.fontSize": { |
| "desc": "\n\n<p> font size.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "12", |
| "min": "1", |
| "step": "1" |
| } |
| }, |
| "axisLabel.rich.<style_name>.align": { |
| "desc": "\n\n<p>Horizontal alignment of text, automatic by default.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'left'</code></li>\n<li><code class=\"codespan\">'center'</code></li>\n<li><code class=\"codespan\">'right'</code></li>\n</ul>\n<p>If <code class=\"codespan\">align</code> is not set in <code class=\"codespan\">rich</code>, <code class=\"codespan\">align</code> in parent level will be used. For example:</p>\n<pre><code class=\"lang-js\">{\n align: right,\n rich: {\n a: {\n // `align` is not set, then it will be right\n }\n }\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "enum", |
| "options": "left,center,right" |
| } |
| }, |
| "axisLabel.rich.<style_name>.verticalAlign": { |
| "desc": "\n\n<p>Vertical alignment of text, automatic by default.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'top'</code></li>\n<li><code class=\"codespan\">'middle'</code></li>\n<li><code class=\"codespan\">'bottom'</code></li>\n</ul>\n<p>If <code class=\"codespan\">verticalAlign</code> is not set in <code class=\"codespan\">rich</code>, <code class=\"codespan\">verticalAlign</code> in parent level will be used. For example:</p>\n<pre><code class=\"lang-js\">{\n verticalAlign: bottom,\n rich: {\n a: {\n // `verticalAlign` is not set, then it will be bottom\n }\n }\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "enum", |
| "options": "top,middle,bottom" |
| } |
| }, |
| "axisLabel.rich.<style_name>.lineHeight": { |
| "desc": "\n\n<p>Line height of the text fragment.</p>\n<p>If <code class=\"codespan\">lineHeight</code> is not set in <code class=\"codespan\">rich</code>, <code class=\"codespan\">lineHeight</code> in parent level will be used. For example:</p>\n<pre><code class=\"lang-js\">{\n lineHeight: 56,\n rich: {\n a: {\n // `lineHeight` is not set, then it will be 56\n }\n }\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "1", |
| "default": "12" |
| } |
| }, |
| "axisLabel.rich.<style_name>.backgroundColor": { |
| "desc": "\n\n<p>Background color of the text fragment.</p>\n<p>Can be color string, like <code class=\"codespan\">'#123234'</code>, <code class=\"codespan\">'red'</code>, <code class=\"codespan\">'rgba(0,23,11,0.3)'</code>.</p>\n<p>Or image can be used, for example:</p>\n<pre><code class=\"lang-js\">backgroundColor: {\n image: 'xxx/xxx.png'\n // It can be URL of a image,\n // or dataURI,\n // or HTMLImageElement,\n // or HTMLCanvasElement.\n}\n</code></pre>\n<p><code class=\"codespan\">width</code> or <code class=\"codespan\">height</code> can be specified when using background image, or\nauto adapted by default.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#fff" |
| } |
| }, |
| "axisLabel.rich.<style_name>.borderColor": { |
| "desc": "\n\n<p>Border color of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#fff" |
| } |
| }, |
| "axisLabel.rich.<style_name>.borderWidth": { |
| "desc": "\n\n<p>Border width of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.rich.<style_name>.borderRadius": { |
| "desc": "\n\n<p>Border radius of the text fragment.</p>\n", |
| "uiControl": { |
| "type": "vector", |
| "min": "0", |
| "dims": "LT,RT, RB, LB" |
| } |
| }, |
| "axisLabel.rich.<style_name>.padding": { |
| "desc": "\n\n<p>Padding of the text fragment, for example:</p>\n<ul>\n<li><code class=\"codespan\">padding: [3, 4, 5, 6]</code>: represents padding of <code class=\"codespan\">[top, right, bottom, left]</code>.</li>\n<li><code class=\"codespan\">padding: 4</code>: represents <code class=\"codespan\">padding: [4, 4, 4, 4]</code>.</li>\n<li><code class=\"codespan\">padding: [3, 4]</code>: represents <code class=\"codespan\">padding: [3, 4, 3, 4]</code>.</li>\n</ul>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> specifies the width and height of the content, without <code class=\"codespan\">padding</code>.</p>\n", |
| "uiControl": { |
| "type": "vector", |
| "min": "0", |
| "dims": "T,R,B,L" |
| } |
| }, |
| "axisLabel.rich.<style_name>.shadowColor": { |
| "desc": "\n\n<p>Shadow color of the text block.</p>\n", |
| "uiControl": { |
| "type": "color" |
| } |
| }, |
| "axisLabel.rich.<style_name>.shadowBlur": { |
| "desc": "\n\n<p>Show blur of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.rich.<style_name>.shadowOffsetX": { |
| "desc": "\n\n<p>Shadow X offset of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.rich.<style_name>.shadowOffsetY": { |
| "desc": "\n\n<p>Shadow Y offset of the text block.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.rich.<style_name>.width": { |
| "desc": "<p>Width of the text block. It is the width of the text by default. In most cases, there is no need to specify it. You may want to use it in some cases like make simple table or using background image (see <code class=\"codespan\">backgroundColor</code>).</p>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> specifies the width and height of the content, without <code class=\"codespan\">padding</code>.</p>\n<p><code class=\"codespan\">width</code> can also be percent string, like <code class=\"codespan\">'100%'</code>, which represents the percent of <code class=\"codespan\">contentWidth</code> (that is, the width without <code class=\"codespan\">padding</code>) of its container box. It is based on <code class=\"codespan\">contentWidth</code> because that each text fragment is layout based on the <code class=\"codespan\">content box</code>, where it makes no sense that calculating width based on <code class=\"codespan\">outerWith</code> in prectice.</p>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> only work when <code class=\"codespan\">rich</code> specified.</p>\n" |
| }, |
| "axisLabel.rich.<style_name>.height": { |
| "desc": "<p>Height of the text block. It is the width of the text by default. You may want to use it in some cases like using background image (see <code class=\"codespan\">backgroundColor</code>).</p>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> specifies the width and height of the content, without <code class=\"codespan\">padding</code>.</p>\n<p>Notice, <code class=\"codespan\">width</code> and <code class=\"codespan\">height</code> only work when <code class=\"codespan\">rich</code> specified.</p>\n" |
| }, |
| "axisLabel.rich.<style_name>.textBorderColor": { |
| "desc": "\n\n<p>Storke color of the text.</p>\n", |
| "uiControl": { |
| "type": "color" |
| } |
| }, |
| "axisLabel.rich.<style_name>.textBorderWidth": { |
| "desc": "\n\n<p>Storke line width of the text.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.rich.<style_name>.textShadowColor": { |
| "desc": "\n\n<p>Shadow color of the text itself.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "#000" |
| } |
| }, |
| "axisLabel.rich.<style_name>.textShadowBlur": { |
| "desc": "\n\n<p>Shadow blue of the text itself.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.rich.<style_name>.textShadowOffsetX": { |
| "desc": "\n\n<p>Shadow X offset of the text itself.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "axisLabel.rich.<style_name>.textShadowOffsetY": { |
| "desc": "\n\n<p>Shadow Y offset of the text itself.</p>\n\n", |
| "uiControl": { |
| "type": "number", |
| "step": "0.5" |
| } |
| }, |
| "splitLine": { |
| "desc": "<p>Split line of axis in <a href=\"#grid\">grid</a> area.</p>\n" |
| }, |
| "splitLine.show": { |
| "desc": "\n\n<p>Set this to <code class=\"codespan\">false</code> to prevent the splitLine from showing.\n<code class=\"codespan\">value</code> type axes are shown by default, while <code class=\"codespan\">category</code> type axes are hidden.</p>\n", |
| "uiControl": { |
| "type": "boolean", |
| "default": "true" |
| } |
| }, |
| "splitLine.lineStyle.color": { |
| "desc": "\n\n<p>The color of the splitLine, which could be set separately.</p>\n<p>SplitLine color could also be set in color array, which the split lines would take as their colors in turns.</p>\n<p>Example:</p>\n<pre><code>splitLine: {\n lineStyle: {\n // Dark and light colors will be used in turns\n color: ['#aaa', '#ddd']\n }\n}\n</code></pre>", |
| "uiControl": { |
| "type": "color" |
| } |
| }, |
| "splitLine.lineStyle.width": { |
| "desc": "\n\n<p>splitLine line width.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "value": "1", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "splitLine.lineStyle.type": { |
| "desc": "\n\n<p>splitLine line type.</p>\n<p>Options are:</p>\n<ul>\n<li><code class=\"codespan\">'solid'</code></li>\n<li><code class=\"codespan\">'dashed'</code></li>\n<li><code class=\"codespan\">'dotted'</code></li>\n</ul>\n", |
| "uiControl": { |
| "type": "enum", |
| "default": "solid", |
| "options": "solid,dashed,dotted" |
| } |
| }, |
| "splitLine.lineStyle.shadowBlur": { |
| "desc": "\n\n<p>Size of shadow blur. This attribute should be used along with <code class=\"codespan\">shadowColor</code>,<code class=\"codespan\">shadowOffsetX</code>, <code class=\"codespan\">shadowOffsetY</code> to set shadow to component.</p>\n<p>For example:</p>\n<pre><code class=\"lang-js\">{\n shadowColor: 'rgba(0, 0, 0, 0.5)',\n shadowBlur: 10\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "splitLine.lineStyle.shadowColor": { |
| "desc": "\n\n<p>Shadow color. Support same format as <code class=\"codespan\">color</code>.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "" |
| } |
| }, |
| "splitLine.lineStyle.shadowOffsetX": { |
| "desc": "\n\n<p>Offset distance on the horizontal direction of shadow.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "0", |
| "step": "0.5" |
| } |
| }, |
| "splitLine.lineStyle.shadowOffsetY": { |
| "desc": "\n\n<p>Offset distance on the vertical direction of shadow.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "0", |
| "step": "0.5" |
| } |
| }, |
| "splitLine.lineStyle.opacity": { |
| "desc": "\n\n<p>Opacity of the component. Supports value from 0 to 1, and the component will not be drawn when set to 0.</p>\n\n", |
| "uiControl": { |
| "type": "number", |
| "default": "1", |
| "min": "0", |
| "max": "1", |
| "step": "0.01" |
| } |
| }, |
| "splitArea": { |
| "desc": "<p>Split area of axis in <a href=\"#grid\">grid</a> area, not shown by default.</p>\n" |
| }, |
| "splitArea.show": { |
| "desc": "\n\n<p>Set this to <code class=\"codespan\">true</code> to show the splitArea.</p>\n", |
| "uiControl": { |
| "type": "boolean", |
| "default": "true" |
| } |
| }, |
| "splitArea.areaStyle": { |
| "desc": "<p>Split area style.</p>\n" |
| }, |
| "splitArea.areaStyle.color": { |
| "desc": "<p>Color of split area.\nSplitArea color could also be set in color array, which the split lines would take as their colors in turns. Dark and light colors in turns are used by default.</p>\n" |
| }, |
| "splitArea.areaStyle.shadowBlur": { |
| "desc": "\n\n<p>Size of shadow blur. This attribute should be used along with <code class=\"codespan\">shadowColor</code>,<code class=\"codespan\">shadowOffsetX</code>, <code class=\"codespan\">shadowOffsetY</code> to set shadow to component.</p>\n<p>For example:</p>\n<pre><code class=\"lang-js\">{\n shadowColor: 'rgba(0, 0, 0, 0.5)',\n shadowBlur: 10\n}\n</code></pre>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "", |
| "min": "0", |
| "step": "0.5" |
| } |
| }, |
| "splitArea.areaStyle.shadowColor": { |
| "desc": "\n\n<p>Shadow color. Support same format as <code class=\"codespan\">color</code>.</p>\n", |
| "uiControl": { |
| "type": "color", |
| "default": "" |
| } |
| }, |
| "splitArea.areaStyle.shadowOffsetX": { |
| "desc": "\n\n<p>Offset distance on the horizontal direction of shadow.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "0", |
| "step": "0.5" |
| } |
| }, |
| "splitArea.areaStyle.shadowOffsetY": { |
| "desc": "\n\n<p>Offset distance on the vertical direction of shadow.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "0", |
| "step": "0.5" |
| } |
| }, |
| "splitArea.areaStyle.opacity": { |
| "desc": "\n\n<p>Opacity of the component. Supports value from 0 to 1, and the component will not be drawn when set to 0.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "1", |
| "min": "0", |
| "max": "1", |
| "step": "0.01" |
| } |
| }, |
| "indicator": { |
| "desc": "<p>Indicator of radar chart, which is used to assign multiple variables(dimensions) in radar chart. Here is the example.</p>\n<pre><code class=\"lang-js\">indicator: [\n { name: 'Sales (sales) ', max: 6500},\n { name: 'Administration (Administration) ', max: 16000, color: 'red'}, // Set the indicator as 'red'\n { name: 'Information Technology (Information Technology) ', max: 30000},\n { name: 'Customer Support (Customer Support) ', max: 38000},\n { name: 'Development (Development) ', max: 52000},\n { name: 'Marketing (Marketing) ', max: 25000}\n]\n</code></pre>\n" |
| }, |
| "indicator.name": { |
| "desc": "<p>Indicator's name.</p>\n" |
| }, |
| "indicator.max": { |
| "desc": "\n\n<p>The maximum value of indicator. It is an optional configuration, but we recommend to set it manually.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "default": "100", |
| "step": "1" |
| } |
| }, |
| "indicator.min": { |
| "desc": "\n\n<p>The minimum value of indicator. It it an optional configuration, with default value of 0.</p>\n", |
| "uiControl": { |
| "type": "number", |
| "step": "1" |
| } |
| }, |
| "indicator.color": { |
| "desc": "\n\n<p>Specfy a color of the indicator.</p>\n", |
| "uiControl": { |
| "type": "color" |
| } |
| } |
| } |
