| <!-- |
| Licensed to the Apache Software Foundation (ASF) under one or more |
| contributor license agreements. See the NOTICE file distributed with |
| this work for additional information regarding copyright ownership. |
| The ASF licenses this file to You under the Apache License, Version 2.0 |
| (the "License"); you may not use this file except in compliance with |
| the License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| --> |
| <html> |
| |
| <head> |
| <meta http-equiv="Content-Language" content="en-us"> |
| <link rel="stylesheet" type="text/css" href="../stylesheets/style.css"> |
| <title>SSHSESSION Task</title> |
| </head> |
| |
| <body> |
| |
| <h2><a name="sshsession">SSHSESSION</a></h2> |
| <h3>Description</h3> |
| |
| <p><em>since Apache Ant 1.8.0</em></p> |
| |
| <p>A Task which establishes an SSH connection with a remote machine |
| running SSH daemon, optionally establishes any number of local or |
| remote tunnels over that connection, then executes any nested tasks |
| before taking down the connection. |
| </p> |
| |
| <p><b>Note:</b> This task depends on external libraries not included |
| in the Ant |
| distribution. See <a href="../install.html#librarydependencies">Library |
| Dependencies</a> for more information. This task has been tested with |
| jsch-0.1.33 and above and won't work with versions of jsch earlier |
| than 0.1.28.</p> |
| |
| <p>See also the <a href="sshexec.html">sshexec</a> |
| and <a href="scp.html">scp</a> tasks</p> |
| |
| <h3>Parameters</h3> |
| <table border="1" cellpadding="2" cellspacing="0"> |
| <tr> |
| <td valign="top"><b>Attribute</b></td> |
| <td valign="top"><b>Description</b></td> |
| <td align="center" valign="top"><b>Required</b></td> |
| </tr> |
| <tr> |
| <td valign="top">host</td> |
| <td valign="top">The hostname or IP address of the remote host to which you wish to connect.</td> |
| <td valign="top" align="center">Yes</td> |
| </tr> |
| <tr> |
| <td valign="top">username</td> |
| <td valign="top">The username on the remote host to which you are connecting.</td> |
| <td valign="top" align="center">Yes</td> |
| </tr> |
| <tr> |
| <td valign="top">port</td> |
| <td valign="top">The port to connect to on the remote host.</td> |
| <td valian="top" align="center">No, defaults to 22.</td> |
| </tr> |
| <tr> |
| <tr> |
| <td valign="top">localtunnels</td> |
| <td valign="top">A comma-delimited list of |
| colon-delimited <code>lport:rhost:rport</code> triplets defining |
| local port forwarding.<br> If |
| nested <a href="#LocalTunnel">localtunnel</a> elements are also |
| provided, both sets of tunnels will be established.</td> |
| <td valian="top" align="center">No</td> |
| </tr> |
| <tr> |
| <td valign="top">remotetunnels</td> |
| <td valign="top">A comma-delimited list of |
| colon-delimited <code>rport:lhost:lport</code> triplets defining |
| remote port forwarding.<br> If |
| nested <a href="#RemoteTunnel">remotetunnel</a> elements are |
| also provided, both sets of tunnels will be established.</td> |
| <td valian="top" align="center">No</td> |
| </tr> |
| <tr> |
| <td valign="top">trust</td> |
| |
| <td valign="top">This trusts all unknown hosts if set to yes/true.<br> |
| <strong>Note</strong> If you set this to false (the default), the |
| host you connect to must be listed in your knownhosts file, this |
| also implies that the file exists.</td> |
| <td valian="top" align="center">No, defaults to No.</td> |
| </tr> |
| <tr> |
| <td valign="top">knownhosts</td> |
| <td valign="top">This sets the known hosts file to use to validate |
| the identity of the remote host. This must be a SSH2 format file. |
| SSH1 format is not supported.</td> |
| <td valian="top" align="center">No, defaults to |
| ${user.home}/.ssh/known_hosts.</td> |
| </tr> |
| <tr> |
| <td valign="top">failonerror</td> |
| <td valign="top">Whether to halt the build if the command does not complete successfully. |
| </td> |
| <td valign="top" align="center">No; defaults to true.</td> |
| </tr> |
| <tr> |
| <td valign="top">password</td> |
| <td valign="top">The password.</td> |
| <td valign="top" align="center">Not if you are using key based |
| authentication or the password has been given in the file or |
| todir attribute.</td> |
| </tr> |
| <tr> |
| <td valign="top">keyfile</td> |
| <td valign="top">Location of the file holding the private key.</td> |
| <td valign="top" align="center">Yes, if you are using key based |
| authentication.</td> |
| </tr> |
| <tr> |
| <td valign="top">passphrase</td> |
| <td valign="top">Passphrase for your private key.</td> |
| <td valign="top" align="center">No, defaults to an empty string.</td> |
| </tr> |
| <tr> |
| <td valign="top">timeout</td> |
| <td valign="top">Give up if the connection cannot be established |
| within the specified time (given in milliseconds). Defaults to 0 |
| which means "wait forever".</td> |
| <td align="center" valign="top">No</td> |
| </tr> |
| </table> |
| |
| <h3>Parameters specified as nested elements</h3> |
| |
| <a name="LocalTunnel"><h4>localtunnel</h4></a> |
| <p>Optionally, any number of localtunnel elements can be used to |
| define local port forwarding over the SSH connection. If the |
| localtunnels parameter was also specified, both sets of tunnels will |
| be established.</p> |
| |
| <table border="1" cellpadding="2" cellspacing="0"> |
| <tr> |
| <td valign="top"><b>Attribute</b></td> |
| <td valign="top"><b>Description</b></td> |
| <td align="center" valign="top"><b>Required</b></td> |
| </tr> |
| <tr> |
| <td valign="top">lport</td> |
| <td valign="top">The number of the local port to be forwarded.</td> |
| <td valign="top" align="center">Yes</td> |
| </tr> |
| <tr> |
| <td valign="top">rhost</td> |
| <td valign="top">The hostname or IP address of the remote host to |
| which the local port should be forwarded.</td> |
| <td valign="top" align="center">Yes</td> |
| </tr> |
| <tr> |
| <td valign="top">rport</td> |
| <td valign="top">The number of the port on the remote host to |
| which the local port should be forwarded.</td> |
| <td valign="top" align="center">Yes</td> |
| </tr> |
| </table> |
| |
| <a name="RemoteTunnel"><h4>remotetunnel</h4></a> |
| <p>Optionally, any number of remotetunnel elements can be used to |
| define remote port forwarding over the SSH connection. If the |
| remotetunnels parameter was also specified, both sets of tunnels will |
| be established.</p> |
| |
| <table border="1" cellpadding="2" cellspacing="0"> |
| <tr> |
| <td valign="top"><b>Attribute</b></td> |
| <td valign="top"><b>Description</b></td> |
| <td align="center" valign="top"><b>Required</b></td> |
| </tr> |
| <tr> |
| <td valign="top">rport</td> |
| <td valign="top">The number of the remote port to be forwarded.</td> |
| <td valign="top" align="center">Yes</td> |
| </tr> |
| <tr> |
| <td valign="top">lhost</td> |
| <td valign="top">The hostname or IP address of the local host to |
| which the remote port should be forwarded.</td> |
| <td valign="top" align="center">Yes</td> |
| </tr> |
| <tr> |
| <td valign="top">lport</td> |
| <td valign="top">The number of the port on the local host to which |
| the remote port should be forwarded.</td> |
| <td valign="top" align="center">Yes</td> |
| </tr> |
| </table> |
| |
| <a name="Sequential"><h4>sequential</h4></a> |
| <p>The sequential element is a required parameter. It is a container |
| for nested Tasks which are to be executed once the SSH connection is |
| established and all local and/or remote tunnels established.</p> |
| |
| <h3>Examples</h3> |
| <p><b>Connect to a remote machine using password authentication, |
| forward the local cvs port to the remote host, and execute a cvs |
| command locally, which can use the tunnel.</b></p> |
| <pre> |
| <sshsession host="somehost" |
| username="dude" |
| password="yo" |
| localtunnels="2401:localhost:2401" |
| > |
| <sequential> |
| <cvs command="update ${cvs.parms} ${module}" |
| cvsRoot="${cvs.root}" |
| dest="${local.root}" |
| failonerror="true" |
| /> |
| </sequential> |
| </sshsession> |
| </pre> |
| |
| <p><b>Do the same thing using nested localtunnel element.</b></p> |
| <pre> |
| <sshsession host="somehost" |
| username="dude" |
| password="yo" |
| > |
| <localtunnel lport="2401" rhost="localhost" rport="2401"/> |
| <sequential> |
| <cvs command="update ${cvs.parms} ${module}" |
| cvsRoot="${cvs.root}" |
| dest="${local.root}" |
| failonerror="true" |
| /> |
| </sequential> |
| </sshsession> |
| </pre> |
| |
| <p><b>Connect to a remote machine using key authentication, forward |
| port 1080 to port 80 of an intranet server which is not directly |
| accessible, then run a get task using that tunnel.</b></p> |
| <pre> |
| <sshsession host="somehost" |
| username="dude" |
| keyfile="${user.home}/.ssh/id_dsa" |
| passphrase="yo its a secret"/> |
| <LocalTunnel lport="1080" rhost="intranet.mycomp.com" rport="80"/> |
| <sequential> |
| <get src="http://localhost:1080/somefile" dest="temp/somefile"/> |
| </sequential> |
| </sshsession> |
| </pre> |
| |
| |
| <p><strong>Security Note:</strong> Hard coding passwords or |
| passphrases and/or usernames in sshsession task can be a serious |
| security hole. Consider using variable substitution and include the |
| password on the command line. For example:<br> |
| <pre> |
| <sshsession host="somehost" |
| username="${username}" |
| password="${password}" |
| localtunnels="2401:localhost:2401"> |
| <sequential> |
| <sometask/> |
| </sequential> |
| </sshsession> |
| </pre> |
| |
| Invoking ant with the following command line: |
| <pre> |
| ant -Dusername=me -Dpassword=mypassword target1 target2 |
| </pre> |
| |
| Is slightly better, but the username/password is exposed to all users |
| on an Unix system (via the ps command). The best approach is to use |
| the |
| <code><input></code> task and/or retrieve the password from a (secured) |
| .properties file. |
| </p> |
| </body> |
| </html> |