| <?xml version="1.0"?> |
| <!-- |
| Licensed to the Apache Software Foundation (ASF) under one or more |
| contributor license agreements. See the NOTICE file distributed with |
| this work for additional information regarding copyright ownership. |
| The ASF licenses this file to You under the Apache License, Version 2.0 |
| (the "License"); you may not use this file except in compliance with |
| the License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| --> |
| |
| <!-- |
| |
| /* |
| * Since the initial version of this file was deveolped on the clock on |
| * an NSF grant I should say the following boilerplate: |
| * |
| * This material is based upon work supported by the National Science |
| * Foundaton under Grant No. EIA-0196404. Any opinions, findings, and |
| * conclusions or recommendations expressed in this material are those |
| * of the author and do not necessarily reflect the views of the |
| * National Science Foundation. |
| */ |
| |
| --> |
| |
| <project name="symlink-test" basedir="." default="all"> |
| |
| <!-- |
| Since the symlink task and some of these targets rely on |
| calls to exec, it may be possible for the JVM to outrun the |
| execution of the command line system calls, so this value is |
| the number of seconds we give the operating system to |
| catch up before executing a task that depends on the |
| completion of previous tasks. This delay is also added to |
| the end of each target so junit doesn't go testing things |
| before they have finnished (hopefully). Tweak if needed. |
| --> |
| |
| <property name="delay" value="3"/> |
| |
| <property name="tdir" value="${basedir}/test-working"/> |
| |
| <target name="setup"> |
| <delete dir="${tdir}"/> |
| <mkdir dir="${tdir}"/> |
| </target> |
| |
| <target name="all" |
| depends="setup, test-single, test-delete, test-record, test-recreate, teardown"/> |
| |
| <!-- test for action = single --> |
| <!-- |
| Creates: |
| File: ${tdir}/symlink.test |
| Link: ${tdir}/singletest |
| --> |
| <target name="test-single"> |
| <touch file="${tdir}/symlink.test"/> |
| <symlink resource="${tdir}/symlink.test" |
| link="${tdir}/singletest" |
| failonerror="yes"/> |
| <sleep seconds="${delay}"/> <!-- make sure OS has time to catch up --> |
| <available file="${tdir}/symlink.test" |
| property="test.single.file.created"/> |
| <available file="${tdir}/singletest" |
| property="test.single.link.created"/> |
| </target> |
| |
| |
| |
| <!-- test for action = delete (no calls to command line so no sleep) --> |
| |
| <!-- |
| Creates: |
| (none) |
| Deletes: |
| Link: ${tdir}/singletest |
| --> |
| |
| <target name="test-delete"> |
| <touch file="${tdir}/symlink.test"/> |
| <symlink resource="${tdir}/symlink.test" |
| link="${tdir}/singletest" |
| failonerror="yes"/> |
| <sleep seconds="${delay}"/> <!-- make sure OS has time to catch up --> |
| |
| <symlink action="delete" link="${tdir}/singletest" failonerror="yes"/> |
| <symlink action="delete" link="${tdir}/symlink.test" failonerror="no"/> |
| <sleep seconds="${delay}"/> <!-- make sure OS has time to catch up --> |
| |
| <available file="${tdir}/symlink.test" |
| property="test.delete.file.still.there"/> |
| <available file="${tdir}/singletest" |
| property="test.delete.link.still.there" |
| value="ERROR: link deletion failed"/> |
| |
| </target> |
| |
| |
| |
| <!-- test for action = record --> |
| |
| <!-- |
| Creates: |
| Dir: ${tdir}/symtest1 |
| Dir: ${tdir}/symtest1/symtest2 |
| Dir: ${tdir}/symtest1/symtest3 |
| File: ${tdir}/symtest1/file1 |
| File: ${tdir}/symtest1/symtest2/file2 |
| File: ${tdir}/symtest1/symtest3/fileA |
| File: ${tdir}/symtest1/symtest3/fileB |
| File: ${tdir}/symtest1/symtest3/fileC |
| Link: ${tdir}/symtest1/link1==>${tdir}/symtest1/file1 |
| Link: ${tdir}/symtest1/link2==>${tdir}/symtest1/symtest2/file2 |
| Link: ${tdir}/symtest1/symtest2/link3==> |
| ${tdir}/symtest1/symtest2/file2 |
| Link: ${tdir}/symtest1/dirlink==>${tdir}/symtest1/symtest3 |
| Link: ${tdir}/symtest1/dirlink2==>${tdir}/symtest1/symtest3 |
| Link: ${tdir}/symtest1/dirlink3==>${tdir}/symtest1/symtest3 |
| File: ${tdir}/symtest1/recorded.links |
| File: ${tdir}/symtest1/symtest2/recorded.links |
| Deletes: |
| (none) |
| --> |
| |
| <target name="test-record"> |
| |
| <mkdir dir="${tdir}/symtest1"/> |
| <mkdir dir="${tdir}/symtest1/symtest2"/> |
| <mkdir dir="${tdir}/symtest1/symtest3"/> |
| <touch file="${tdir}/symtest1/file1"/> |
| <touch file="${tdir}/symtest1/symtest2/file2"/> |
| |
| <touch file="${tdir}/symtest1/symtest3/fileA"/> |
| <touch file="${tdir}/symtest1/symtest3/fileB"/> |
| <touch file="${tdir}/symtest1/symtest3/fileC"/> |
| |
| <symlink resource="${tdir}/symtest1/file1" |
| link="${tdir}/symtest1/link1" |
| failonerror="no" /> |
| <symlink resource="${tdir}/symtest1/symtest2/file2" |
| link="${tdir}/symtest1/link2" |
| failonerror="no" /> |
| <symlink resource="${tdir}/symtest1/symtest2/file2" |
| link="${tdir}/symtest1/symtest2/link3" |
| failonerror="no" /> |
| <symlink resource="${tdir}/symtest1/symtest3" |
| link="${tdir}/symtest1/dirlink" |
| failonerror="no" /> |
| <symlink resource="${tdir}/symtest1/symtest3" |
| link="${tdir}/symtest1/dirlink2" |
| failonerror="no"/> |
| <symlink resource="${tdir}/symtest1/symtest3" |
| link="${tdir}/symtest1/dirlink3" |
| failonerror="no"/> |
| |
| <sleep seconds="${delay}"/> <!-- make sure OS has time to catch up --> |
| |
| <symlink action="record" linkfilename="recorded.links"> |
| <fileset dir="${tdir}/symtest1" includes="**/**"/> |
| </symlink> |
| |
| <sleep seconds="${delay}"/> <!-- make sure OS has time to catch up --> |
| |
| <!-- Test to see if the directories were created --> |
| |
| <available file="${tdir}/symtest1" |
| type="dir" |
| property="test.record.dir1.created"/> |
| |
| <available file="${tdir}/symtest1/symtest2" |
| type="dir" |
| property="test.record.dir2.created"/> |
| |
| <available file="${tdir}/symtest1/symtest3" |
| type="dir" |
| property="test.record.dir3.created"/> |
| |
| <!-- Test to see if the Files were created --> |
| |
| <available file="${tdir}/symtest1/file1" |
| property="test.record.file1.created"/> |
| |
| <available file="${tdir}/symtest1/symtest2/file2" |
| property="test.record.file2.created"/> |
| |
| <available file="${tdir}/symtest1/symtest3/fileA" |
| property="test.record.fileA.created"/> |
| |
| <available file="${tdir}/symtest1/symtest3/fileB" |
| property="test.record.fileB.created"/> |
| |
| <available file="${tdir}/symtest1/symtest3/fileC" |
| property="test.record.fileC.created"/> |
| |
| <!-- Test to see if the links were created --> |
| |
| <available file="${tdir}/symtest1/link1" |
| property="test.record.link1.created"/> |
| |
| <available file="${tdir}/symtest1/link2" |
| property="test.record.link2.created"/> |
| |
| <available file="${tdir}/symtest1/symtest2/link3" |
| property="test.record.link3.created"/> |
| |
| <available file="${tdir}/symtest1/dirlink" |
| property="test.record.dirlink.created"/> |
| |
| <!-- this is redundant for this test, but used in the recreate test --> |
| |
| <available file="${tdir}/symtest1/dirlink2" |
| property="test.record.dirlink2.created"/> |
| |
| <!-- Test to see if the linkfiles were created --> |
| |
| <available file="${tdir}/symtest1/recorded.links" |
| property="test.record.dir1.recorded"/> |
| |
| <available file="${tdir}/symtest1/symtest2/recorded.links" |
| property="test.record.dir2.recorded"/> |
| |
| <!-- THIS should not be set --> |
| |
| <available file="${tdir}/symtest1/symtest3/recorded.links" |
| property="test.record.dir3.recorded" |
| value="ERROR: symtest3/recorded.links should not exist"/> |
| |
| |
| </target> |
| |
| <!-- test for action = recreate --> |
| |
| <!-- |
| Deletes: |
| Link: ${tdir}/symtest1/link1==>${tdir}/symtest1/file1 |
| Link: ${tdir}/symtest1/link2==>${tdir}/symtest1/symtest2/file2 |
| Link: ${tdir}/symtest1/symtest2/link3==> |
| ${tdir}/symtest1/symtest2/file2 |
| Link: ${tdir}/symtest1/dirlink==>${tdir}/symtest1/symtest3 |
| Link: ${tdir}/symtest1/dirlink3==>${tdir}/symtest1/symtest3 |
| |
| Creates |
| Link: ${tdir}/symtest1/dirlink3==>${tdir}/symtest1/symtest2 |
| |
| Recreates: |
| Link: ${tdir}/symtest1/link1==>${tdir}/symtest1/file1 |
| Link: ${tdir}/symtest1/link2==>${tdir}/symtest1/symtest2/file2 |
| Link: ${tdir}/symtest1/symtest2/link3==> |
| ${tdir}/symtest1/symtest2/file2 |
| Link: ${tdir}/symtest1/dirlink==>${tdir}/symtest1/symtest3 |
| |
| Should Change: |
| Link: ${tdir}/symtest1/dirlink3==>${tdir}/symtest1/symtest2 |
| to |
| ${tdir}/symtest1/dirlink3==>${tdir}/symtest1/symtest3 |
| |
| Should Not Create (bug 25181): |
| Link: ${tdir}/symtest1/symtest3/dirlink2==>${tdir}/symtest1/symtest3 |
| --> |
| |
| <target name="test-recreate" depends="test-record"> |
| |
| <symlink action="delete" link="${tdir}/symtest1/link1"/> |
| <symlink action="delete" link="${tdir}/symtest1/link2"/> |
| <symlink action="delete" link="${tdir}/symtest1/symtest2/link3"/> |
| <symlink action="delete" link="${tdir}/symtest1/dirlink"/> |
| <!-- dirlink2 intentionally not deleted to test bug 25181 --> |
| <symlink action="delete" link="${tdir}/symtest1/dirlink3"/> |
| |
| <sleep seconds="${delay}"/> <!-- make sure OS has time to catch up --> |
| |
| <symlink resource="${tdir}/symtest1/symtest2" |
| link="${tdir}/symtest1/dirlink3" |
| failonerror="no"/> |
| |
| <sleep seconds="${delay}"/> <!-- make sure OS has time to catch up --> |
| |
| <available file="${tdir}/symtest1/link1" |
| property="test.recreate.link1.not.removed" |
| value="ERROR: rm -f symtest1/link1 failed"/> |
| |
| <available file="${tdir}/symtest1/link2" |
| property="test.recreate.link2.not.removed" |
| value="ERROR: rm -f symtest1/link2 failed"/> |
| |
| <available file="${tdir}/symtest1/symtest2/link3" |
| property="test.recreate.link3.not.removed" |
| value="ERROR: rm -f symtest1/symtest2/link3 failed"/> |
| |
| <available file="${tdir}/symtest1/zdirlink" |
| property="test.recreate.zdirlink.not.removed" |
| value="ERROR: rm -f symtest1/zdirlink failed"/> |
| |
| <sleep seconds="${delay}"/> <!-- make sure OS has time to do the execs --> |
| |
| <symlink action="recreate"> |
| <fileset dir="${tdir}/symtest1" includes="**/recorded.links"/> |
| </symlink> |
| |
| <sleep seconds="${delay}"/> <!-- make sure OS has time to catch up --> |
| |
| <available file="${tdir}/symtest1/link1" |
| property="test.recreate.link1.recreated"/> |
| |
| <available file="${tdir}/symtest1/link2" |
| property="test.recreate.link2.recreated"/> |
| |
| <available file="${tdir}/symtest1/symtest2/link3" |
| property="test.recreate.link3.recreated"/> |
| |
| <available file="${tdir}/symtest1/dirlink" |
| property="test.recreate.dirlink.recreated"/> |
| |
| <!-- this should not get set --> |
| <available file="${tdir}/symtest1/symtest3/symtest3" |
| property="test.recreate.dirlink2.recreated.twice" |
| value="ERROR: dirlink2 was created a second time (bug 25181)"/> |
| |
| <touch file="${tdir}/symtest1/dirlink3/WhereAmI"/> |
| |
| <sleep seconds="${delay}"/> <!-- make sure OS has time to do the execs --> |
| |
| <available file="${tdir}/symtest1/symtest3/WhereAmI" |
| property="test.recreate.dirlink3.was.altered"/> |
| </target> |
| |
| |
| <!-- CALL THIS to clean things up afterwards --> |
| |
| <target name="teardown"> |
| <delete dir="${tdir}"/> |
| </target> |
| |
| </project> |
