| <?xml version="1.0"?> |
| <?xml-stylesheet type="text/xsl" href="configuration.xsl"?> |
| <!-- |
| Licensed to the Apache Software Foundation (ASF) under one or more |
| contributor license agreements. See the NOTICE file distributed with |
| this work for additional information regarding copyright ownership. |
| The ASF licenses this file to You under the Apache License, Version 2.0 |
| (the "License"); you may not use this file except in compliance with |
| the License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| --> |
| <configuration supports_final="true"> |
| <!-- |
| Note: This file includes only those configs which are supposed to have different value from the parent hive/hive-site. |
| It inherits the other required configs from hive/hive-site. |
| The inheritance logic in order to get hive2/hive-site goes like this : |
| |
| 1. We read the hive/hive-site which includes the stack defaults and Stack Advisor recommended values. |
| 2. We take the read hive/hive-site (step 1), and on top of it apply the hive-interactive-site to get |
| hive2/hive-site. |
| |
| Therefore, any config defined here will override the config value read from hive2/hive-site (step 1). |
| --> |
| <property> |
| <name>hive.server2.thrift.port</name> |
| <value>10500</value> |
| <display-name>HiveServer2 Port</display-name> |
| <description> |
| TCP port number to listen on, default 10500. |
| </description> |
| <value-attributes> |
| <overridable>false</overridable> |
| <type>int</type> |
| </value-attributes> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.server2.thrift.http.port</name> |
| <value>10501</value> |
| <description>Port number of HiveServer2 Thrift interface when hive.server2.transport.mode is 'http'.</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.server2.tez.sessions.per.default.queue</name> |
| <value>1</value> |
| <description> |
| The maximum number of queries the Hive Interactive cluster will be able to handle concurrently. |
| </description> |
| <display-name>Maximum Total Concurrent Queries</display-name> |
| <value-attributes> |
| <type>int</type> |
| <minimum>1</minimum> |
| <maximum>10</maximum> |
| <increment-step>1</increment-step> |
| </value-attributes> |
| <depends-on> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>enable_hive_interactive</name> |
| </property> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>num_llap_nodes</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.llap.daemon.queue.name</name> |
| </property> |
| <property> |
| <type>capacity-scheduler</type> |
| <name>yarn.scheduler.capacity.root.queues</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.metastore.uris</name> |
| <value/> |
| <description>Thrift URI for the remote metastore. Used by metastore client to connect to remote metastore.</description> |
| <value-attributes> |
| <empty-value-valid>true</empty-value-valid> |
| </value-attributes> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.server2.enable.doAs</name> |
| <value>false</value> |
| <description> |
| Setting this property to true will have HiveServer2 execute |
| Hive operations as the user making the calls to it. |
| </description> |
| <display-name>Run as end user instead of Hive user</display-name> |
| <value-attributes> |
| <type>value-list</type> |
| <entries> |
| <entry> |
| <value>true</value> |
| <label>True</label> |
| </entry> |
| <entry> |
| <value>false</value> |
| <label>False</label> |
| </entry> |
| </entries> |
| <selection-cardinality>1</selection-cardinality> |
| </value-attributes> |
| <depends-on> |
| <property> |
| <type>hive-env</type> |
| <name>hive_security_authorization</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <!-- This is different for Hive batch and interactive --> |
| <name>hive.prewarm.enabled</name> |
| <value>false</value> |
| <description>Enables container prewarm for Tez (Hadoop 2 only)</description> |
| <display-name>Hold Containers to Reduce Latency</display-name> |
| <value-attributes> |
| <type>value-list</type> |
| <entries> |
| <entry> |
| <value>true</value> |
| <label>True</label> |
| </entry> |
| <entry> |
| <value>false</value> |
| <label>False</label> |
| </entry> |
| </entries> |
| <selection-cardinality>1</selection-cardinality> |
| </value-attributes> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.vectorized.execution.reduce.enabled</name> |
| <value>true</value> |
| <description> |
| This flag should be set to true to enable vectorized mode of the reduce-side of |
| query execution. |
| </description> |
| <display-name>Enable Reduce Vectorization</display-name> |
| <value-attributes> |
| <type>value-list</type> |
| <entries> |
| <entry> |
| <value>true</value> |
| <label>True</label> |
| </entry> |
| <entry> |
| <value>false</value> |
| <label>False</label> |
| </entry> |
| </entries> |
| <selection-cardinality>1</selection-cardinality> |
| </value-attributes> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.server2.tez.default.queues</name> |
| <display-name>Default query queues</display-name> |
| <value>default</value> |
| <description> |
| A list of comma separated values corresponding to YARN queues of the same name. |
| When HiveServer2 is launched in Tez mode, this configuration needs to be set |
| for multiple Tez sessions to run in parallel on the cluster. |
| </description> |
| <value-attributes> |
| <type>combo</type> |
| <entries> |
| <entry> |
| <value>default</value> |
| <label>Default</label> |
| </entry> |
| </entries> |
| <selection-cardinality>1+</selection-cardinality> |
| </value-attributes> |
| <depends-on> |
| <property> |
| <type>capacity-scheduler</type> |
| <name>yarn.scheduler.capacity.root.queues</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.llap.daemon.queue.name</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.server2.tez.initialize.default.sessions</name> |
| <value>true</value> |
| <description> |
| This flag is used in HiveServer2 to enable a user to use HiveServer2 without |
| turning on Tez for HiveServer2. The user could potentially want to run queries |
| over Tez without the pool of sessions. |
| </description> |
| <display-name>Start Tez session at Initialization</display-name> |
| <value-attributes> |
| <type>value-list</type> |
| <entries> |
| <entry> |
| <value>true</value> |
| <label>True</label> |
| </entry> |
| <entry> |
| <value>false</value> |
| <label>False</label> |
| </entry> |
| </entries> |
| <selection-cardinality>1</selection-cardinality> |
| </value-attributes> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.driver.parallel.compilation</name> |
| <value>true</value> |
| <description> |
| This flag allows HiveServer2 to compile queries in parallel. |
| </description> |
| <display-name>Compile queries in parallel</display-name> |
| <value-attributes> |
| <type>value-list</type> |
| <entries> |
| <entry> |
| <value>true</value> |
| <label>True</label> |
| </entry> |
| <entry> |
| <value>false</value> |
| <label>False</label> |
| </entry> |
| </entries> |
| <selection-cardinality>1</selection-cardinality> |
| </value-attributes> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.server2.webui.port</name> |
| <value>10502</value> |
| <description>Web UI port address</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.server2.webui.use.ssl</name> |
| <value>false</value> |
| <description>Enable SSL for HiveServer2 Interactive</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.server2.leadertest.use.ip</name> |
| <value>true</value> |
| <description>Use ip address to check hive interactive service status</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.server2.zookeeper.namespace</name> |
| <value>hiveserver2-hive2</value> |
| <description>The parent node in ZooKeeper used by HiveServer2 when supporting dynamic service discovery.</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.daemon.queue.name</name> |
| <value>default</value> |
| <description>Choose the YARN queue in this cluster that is dedicated to interactive query.</description> |
| <display-name>Interactive Query Queue</display-name> |
| <value-attributes> |
| <type>combo</type> |
| <entries> |
| <entry> |
| <value>default</value> |
| <label>Default</label> |
| </entry> |
| </entries> |
| <selection-cardinality>1</selection-cardinality> |
| </value-attributes> |
| <depends-on> |
| <property> |
| <type>capacity-scheduler</type> |
| <name>yarn.scheduler.capacity.root.queues</name> |
| </property> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>enable_hive_interactive</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.daemon.yarn.shuffle.port</name> |
| <value>15551</value> |
| <description>YARN shuffle port for LLAP-daemon-hosted shuffle.</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.execution.engine</name> |
| <value>tez</value> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.execution.mode</name> |
| <value>llap</value> |
| <description>Chooses whether query fragments will run in container or in llap</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.execution.mode</name> |
| <value>all</value> |
| <description>Chooses which fragments of a query will run in llap</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.io.enabled</name> |
| <value>true</value> |
| <description>Whether the LLAP IO layer is enabled.</description> |
| <depends-on> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.llap.io.memory.size</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.io.use.lrfu</name> |
| <value>true</value> |
| <description>Whether ORC low-level cache should use LRFU cache policy instead of default (FIFO).</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.auto.allow.uber</name> |
| <value>false</value> |
| <description>Whether or not to allow the planner to run vertices in the AM.</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.object.cache.enabled</name> |
| <value>true</value> |
| <description>Cache objects (plans, hashtables, etc) in llap</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.tez.input.generate.consistent.splits</name> |
| <value>true</value> |
| <description>Whether to generate consistent split locations when generating splits in the AM</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.client.consistent.splits</name> |
| <description> |
| Whether to setup split locations to match nodes on which llap daemons are running, |
| instead of using the locations provided by the split itself. |
| </description> |
| <value>true</value> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.task.scheduler.locality.delay</name> |
| <value>-1</value> |
| <description> |
| Amount of time to wait before allocating a request which contains location information, |
| to a location other than the ones requested. Set to -1 for an infinite delay, 0 |
| for no delay. |
| </description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.exec.orc.split.strategy</name> |
| <value>HYBRID</value> |
| <description> |
| This is not a user level config. BI strategy is used when the requirement is to spend less time in split generation |
| as opposed to query execution (split generation does not read or cache file footers). |
| ETL strategy is used when spending little more time in split generation is acceptable |
| (split generation reads and caches file footers). HYBRID chooses between the above strategies |
| based on heuristics. |
| </description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.daemon.service.hosts</name> |
| <value>@llap0</value> |
| <description> |
| Explicitly specified hosts to use for LLAP scheduling. Useful for testing. By default, |
| a ZooKeeper based registry is used. |
| </description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.io.memory.size</name> |
| <display-name>In-Memory Cache per Daemon</display-name> |
| <description>The amount of memory reserved for Hive's optimized in-memory cache.</description> |
| <value>0</value> |
| <value-attributes> |
| <type>int</type> |
| <unit>MB</unit> |
| <overridable>false</overridable> |
| </value-attributes> |
| <depends-on> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>enable_hive_interactive</name> |
| </property> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>num_llap_nodes</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.llap.daemon.queue.name</name> |
| </property> |
| <property> |
| <type>capacity-scheduler</type> |
| <name>yarn.scheduler.capacity.root.queues</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.server2.tez.sessions.per.default.queue</name> |
| </property> |
| <property> |
| <type>tez-site</type> |
| <name>tez.am.resource.memory.mb</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.daemon.num.executors</name> |
| <display-name>Number of executors per LLAP Daemon</display-name> |
| <description>The number of fragments that a single LLAP daemon will run concurrently. Usually, this will be the same as the number of available CPUs</description> |
| <value>1</value> |
| <value-attributes> |
| <type>int</type> |
| </value-attributes> |
| <depends-on> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>enable_hive_interactive</name> |
| </property> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>num_llap_nodes</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.llap.daemon.queue.name</name> |
| </property> |
| <property> |
| <type>capacity-scheduler</type> |
| <name>yarn.scheduler.capacity.root.queues</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.server2.tez.sessions.per.default.queue</name> |
| </property> |
| <property> |
| <type>tez-site</type> |
| <name>tez.am.resource.memory.mb</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.daemon.vcpus.per.instance</name> |
| <value>${hive.llap.daemon.num.executors}</value> |
| <description>The total number of vcpus to use for the executors inside LLAP.</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.daemon.yarn.container.mb</name> |
| <display-name>Memory per Daemon</display-name> |
| <description> |
| Total memory used by individual LLAP daemons (YARN Container size). This includes memory |
| for the cache as well as for the query execution. Should be larger than the sum of |
| the Daemon cache size and the daemon heap size, and should leave some headroom |
| after this (In most cases: cache size + heap size + headroom = Memory Per Daemon). |
| </description> |
| <value>0</value> |
| <value-attributes> |
| <type>int</type> |
| <unit>MB</unit> |
| <overridable>false</overridable> |
| </value-attributes> |
| <depends-on> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>enable_hive_interactive</name> |
| </property> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>num_llap_nodes</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.llap.daemon.queue.name</name> |
| </property> |
| <property> |
| <type>capacity-scheduler</type> |
| <name>yarn.scheduler.capacity.root.queues</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.server2.tez.sessions.per.default.queue</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>llap.shuffle.connection-keep-alive.enable</name> |
| <value>true</value> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>llap.shuffle.connection-keep-alive.timeout</name> |
| <value>60</value> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.io.threadpool.size</name> |
| <value>2</value> |
| <description>Specify the number of threads to use for low-level IO thread pool.</description> |
| <depends-on> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.llap.daemon.num.executors</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.daemon.rpc.port</name> |
| <value>0</value> |
| <description>The LLAP daemon RPC port.</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.management.rpc.port</name> |
| <value>15004</value> |
| <description>RPC port for LLAP daemon management service.</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.daemon.task.scheduler.enable.preemption</name> |
| <value>true</value> |
| <description>hive.llap.daemon.task.scheduler.enable.preemption</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.tez.exec.print.summary</name> |
| <value>true</value> |
| <description>Display breakdown of execution steps, for every query executed by the shell.</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.vectorized.execution.mapjoin.native.enabled</name> |
| <value>true</value> |
| <description> |
| This flag should be set to true to enable native (i.e. non-pass through) vectorization |
| of queries using MapJoin. |
| </description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.vectorized.execution.mapjoin.minmax.enabled</name> |
| <value>true</value> |
| <description> |
| This flag should be set to true to enable vector map join hash tables to |
| use max / max filtering for integer join queries using MapJoin. |
| </description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.vectorized.execution.mapjoin.native.fast.hashtable.enabled</name> |
| <value>true</value> |
| <description> |
| This flag should be set to true to enable use of native fast vector map join hash tables in |
| queries using MapJoin. |
| </description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.mapjoin.hybridgrace.hashtable</name> |
| <value>false</value> |
| <description>Whether to use hybrid grace hash join as the join method for mapjoin. Tez only.</description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.tez.bucket.pruning</name> |
| <value>true</value> |
| <description> |
| When pruning is enabled, filters on bucket columns will be processed by |
| filtering the splits against a bitset of included buckets. This needs predicates |
| produced by hive.optimize.ppd and hive.optimize.index.filters. |
| </description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.optimize.dynamic.partition.hashjoin</name> |
| <value>true</value> |
| <description> |
| Whether to enable dynamically partitioned hash join optimization. |
| This setting is also dependent on enabling hive.auto.convert.join |
| </description> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.zk.sm.connectionString</name> |
| <value>localhost:2181</value> |
| <description>ZooKeeper connection string for ZooKeeper SecretManager.</description> |
| <depends-on> |
| <property> |
| <type>zoo.cfg</type> |
| <name>clientPort</name> |
| </property> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>enable_hive_interactive</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.llap.io.memory.mode</name> |
| <value/> |
| <description> |
| LLAP IO memory usage; 'cache' (the default) uses data and metadata cache with a |
| custom off-heap allocator, 'allocator' uses the custom allocator without the caches, |
| 'none' doesn't use either (this mode may result in significant performance degradation) |
| </description> |
| <value-attributes> |
| <empty-value-valid>true</empty-value-valid> |
| </value-attributes> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.metastore.event.listeners</name> |
| <value/> |
| <description> |
| Listeners for metastore events |
| </description> |
| <value-attributes> |
| <empty-value-valid>true</empty-value-valid> |
| </value-attributes> |
| <on-ambari-upgrade add="false"/> |
| </property> |
| <property> |
| <name>hive.tez.container.size</name> |
| <value>682</value> |
| <depends-on> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>enable_hive_interactive</name> |
| </property> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>num_llap_nodes</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.llap.daemon.queue.name</name> |
| </property> |
| <property> |
| <type>capacity-scheduler</type> |
| <name>yarn.scheduler.capacity.root.queues</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.server2.tez.sessions.per.default.queue</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="false"/> |
| </property> |
| <property> |
| <name>hive.auto.convert.join.noconditionaltask.size</name> |
| <value>1000000000</value> |
| <description>If hive.auto.convert.join.noconditionaltask is off, this parameter does not take affect. However, if it |
| is on, and the sum of size for n-1 of the tables/partitions for a n-way join is smaller than this size, the join is directly |
| converted to a mapjoin(there is no conditional task). The default is 10MB. |
| </description> |
| <depends-on> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>enable_hive_interactive</name> |
| </property> |
| <property> |
| <type>hive-interactive-env</type> |
| <name>num_llap_nodes</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.llap.daemon.queue.name</name> |
| </property> |
| <property> |
| <type>capacity-scheduler</type> |
| <name>yarn.scheduler.capacity.root.queues</name> |
| </property> |
| <property> |
| <type>hive-interactive-site</type> |
| <name>hive.server2.tez.sessions.per.default.queue</name> |
| </property> |
| </depends-on> |
| <on-ambari-upgrade add="true"/> |
| </property> |
| <property> |
| <name>hive.map.aggr.hash.min.reduction</name> |
| <value>0.99</value> |
| <description> |
| Hash aggregation will be turned off if the ratio between hash table size and input rows is bigger than this number. |
| Set to 1 to make sure hash aggregation is never turned off. |
| </description> |
| <on-ambari-upgrade add="false"/> |
| </property> |
| <property> |
| <name>hive.vectorized.groupby.maxentries</name> |
| <value>1000000</value> |
| <description> |
| Max number of entries in the vector group by aggregation hashtables. |
| Exceeding this will trigger a flush irrelevant of memory pressure condition. |
| </description> |
| <on-ambari-upgrade add="false"/> |
| </property> |
| |
| </configuration> |