scripts/tools/setup_breeze

#!/usr/bin/env bash
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
set -euo pipefail

MY_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
AIRFLOW_SOURCES=$(cd "${MY_DIR}/../.." && pwd)

COLOR_RED=$'\e[31m'
COLOR_GREEN=$'\e[32m'
COLOR_YELLOW=$'\e[33m'
COLOR_BLUE=$'\e[34m'
COLOR_RESET=$'\e[0m'

UV_VERSION="0.13.1"

SHIM_DIR="${HOME}/.local/bin"
SHIM_PATH="${SHIM_DIR}/breeze"

# Marker line embedded in the shim — used to tell our own shim apart from a
# foreign breeze binary (e.g. left over from `uv tool install`).
SHIM_MARKER="# Apache Airflow breeze shim — managed by scripts/tools/setup_breeze (ADR 0017)."

# Shim body version, stamped into the shim as a "# breeze-shim-version: N" line.
# Bump this whenever the shim body below changes. On startup breeze reads this
# value from the sources it operates on and compares it with the version baked
# into the installed shim; if the installed shim is older it warns the user to
# re-run this script. See warn_if_shim_outdated() in
# dev/breeze/src/airflow_breeze/utils/path_utils.py.
SHIM_VERSION="3"

# The shim itself. Runs breeze via 'uv run' against the dev/breeze folder of the
# *current* git worktree, so multiple checkouts / agentic worktrees never
# share a single global install. '--locked' pins every dependency to the
# committed dev/breeze/uv.lock, so a fresh third-party release cannot change
# what breeze runs with until that lock is upgraded. See ADR 0017.
#
# When invoked outside any Airflow worktree (e.g. from an SVN release checkout
# such as asf-dist during a provider release), the shim falls back to, in order:
# $AIRFLOW_REPO_ROOT (exported by the release docs) if it points at a worktree,
# then the worktree this shim was installed from (AIRFLOW_SOURCES, baked in below).
read -r -d '' BREEZE_SHIM_BODY <<BREEZE_SHIM || true
#!/usr/bin/env bash
${SHIM_MARKER}
# breeze-shim-version: ${SHIM_VERSION}
# Runs breeze from the dev/breeze folder of the current git worktree via 'uv run',
# so each worktree (e.g. parallel agentic runs) gets its own environment tied to
# that worktree's source, with dependencies resolved from dev/breeze/uv.lock.
#
# Resolution order for the Airflow sources breeze runs from:
#   1. the current git worktree (per-worktree isolation — see ADR 0017);
#   2. \$AIRFLOW_REPO_ROOT, if exported and pointing at an Airflow worktree — the
#      release docs export this, so breeze resolves the same way across every
#      release process regardless of where the shim was installed from;
#   3. the install-time fallback baked in below (the worktree setup_breeze ran from).
# Steps 2 and 3 apply only when the current directory is not an Airflow worktree,
# so the fallbacks never override a real worktree and isolation is preserved.
set -e
# Install-time fallback: the Airflow sources 'scripts/tools/setup_breeze' was run
# from. Used only when the current directory is not an Airflow worktree.
fallback_root="${AIRFLOW_SOURCES}"
repo_root=\$(git rev-parse --show-toplevel 2>/dev/null) || repo_root=""
if [ -n "\${repo_root}" ] && [ -d "\${repo_root}/dev/breeze" ]; then
    breeze_root="\${repo_root}"
elif [ -n "\${AIRFLOW_REPO_ROOT:-}" ] && [ -d "\${AIRFLOW_REPO_ROOT}/dev/breeze" ]; then
    breeze_root="\${AIRFLOW_REPO_ROOT}"
elif [ -d "\${fallback_root}/dev/breeze" ]; then
    breeze_root="\${fallback_root}"
else
    echo "breeze: not inside an Airflow worktree, AIRFLOW_REPO_ROOT is unset or not an Airflow worktree, and the install-time fallback '\${fallback_root}/dev/breeze' is missing — re-run scripts/tools/setup_breeze" >&2
    exit 1
fi
# '--locked' already guarantees no rewrite; an inherited UV_FROZEN conflicts with it on older uv.
exec env -u UV_FROZEN AIRFLOW_ROOT_PATH="\${breeze_root}" SKIP_BREEZE_SELF_UPGRADE_CHECK=1 \\
    uv run --project "\${breeze_root}/dev/breeze" --locked --quiet breeze "\$@"
BREEZE_SHIM

function manual_instructions() {
    echo
    echo "${COLOR_BLUE}Please complete the setup manually:${COLOR_RESET}"
    echo
    echo "  1. Install uv (any reasonably recent version, >= ${UV_VERSION}):"
    echo
    echo "        python -m pip install \"uv>=${UV_VERSION}\""
    echo
    echo "  2. Make sure ${SHIM_DIR} exists and is on your PATH."
    echo
    echo "  3. Write the following file to ${SHIM_PATH} and mark it executable (chmod +x):"
    echo
    echo "${BREEZE_SHIM_BODY}" | sed 's/^/        /'
    echo
    exit 1
}

function ensure_uv_installed() {
    if ! command -v "uv" >/dev/null 2>/dev/null; then
        echo
        echo "${COLOR_RED}'uv' is not on PATH. It is required to run breeze via uvx.${COLOR_RESET}"
        export TIMEOUT=0
        if "${MY_DIR}/confirm" "Installing uv via pip"; then
            python -m pip install "uv>=${UV_VERSION}" --upgrade
            echo
            echo "${COLOR_YELLOW}Please close and re-open the shell, then re-run this script.${COLOR_RESET}"
            echo
            exit
        else
            manual_instructions
        fi
    fi
}

function fail_on_legacy_global_install() {
    # If a previous setup did `uv tool install -e ./dev/breeze`, both that install
    # and our shim want to live at ~/.local/bin/breeze. Refuse to proceed until
    # the user removes the legacy install — silent overwrite would corrupt uv's
    # tool state and confuse later upgrades.
    local legacy_uv=0 legacy_pipx=0 uv_tool_dir=""
    if uv tool list 2>/dev/null | grep -q '^apache-airflow-breeze\b'; then
        legacy_uv=1
    else
        # A tool whose environment is corrupted is dropped from `uv tool list` output entirely
        # (uv only mentions it in a stderr warning), while its directory and the breeze entry
        # point it owns both survive. Ask uv where its tools live so such an install is still
        # reported here, instead of surfacing later as an unexplained refusal to install.
        uv_tool_dir=$(uv tool dir 2>/dev/null) || uv_tool_dir=""
        if [[ -n "${uv_tool_dir}" && -d "${uv_tool_dir}/apache-airflow-breeze" ]]; then
            legacy_uv=1
        fi
    fi
    if command -v pipx >/dev/null 2>&1 && pipx list --short 2>/dev/null | grep -q '^apache-airflow-breeze\b'; then
        legacy_pipx=1
    fi
    if [[ ${legacy_uv} -eq 0 && ${legacy_pipx} -eq 0 ]]; then
        return
    fi
    echo
    echo "${COLOR_RED}A legacy global breeze install was detected.${COLOR_RESET}"
    echo "${COLOR_YELLOW}It must be removed before installing the new shim, otherwise both${COLOR_RESET}"
    echo "${COLOR_YELLOW}write to ${SHIM_PATH} and conflict. Run:${COLOR_RESET}"
    echo
    if [[ ${legacy_uv} -eq 1 ]]; then
        echo "    uv tool uninstall apache-airflow-breeze"
    fi
    if [[ ${legacy_pipx} -eq 1 ]]; then
        echo "    pipx uninstall apache-airflow-breeze"
    fi
    echo
    echo "${COLOR_YELLOW}Then re-run this script.${COLOR_RESET}"
    echo
    exit 1
}

function check_shim_dir_on_path() {
    case ":${PATH}:" in
        *":${SHIM_DIR}:"*) return ;;
    esac
    echo
    echo "${COLOR_YELLOW}Note: ${SHIM_DIR} is not on your PATH.${COLOR_RESET}"
    echo "${COLOR_YELLOW}Add this to your shell rc to make 'breeze' available:${COLOR_RESET}"
    echo
    echo "    export PATH=\"${SHIM_DIR}:\$PATH\""
    echo
}

function install_breeze_shim() {
    mkdir -p "${SHIM_DIR}"

    # A dangling symlink is invisible to the checks below (-e and -f both follow symlinks) and
    # would send our write to the link's target instead of ${SHIM_PATH}.
    if [[ -L "${SHIM_PATH}" && ! -e "${SHIM_PATH}" ]]; then
        local link_target uv_tool_dir=""
        link_target=$(readlink "${SHIM_PATH}")
        uv_tool_dir=$(uv tool dir 2>/dev/null) || uv_tool_dir=""
        if [[ -n "${uv_tool_dir}" && "${link_target}" == "${uv_tool_dir}/"* ]]; then
            # `uv tool uninstall` cannot retract an entry point once it has lost the tool
            # metadata recording it, so a corrupted install leaves this behind for us to reclaim.
            rm -f "${SHIM_PATH}"
            echo "${COLOR_YELLOW}Removed the dangling ${SHIM_PATH} left behind by uv.${COLOR_RESET}"
        else
            echo
            echo "${COLOR_RED}${SHIM_PATH} is a broken symlink to ${link_target}.${COLOR_RESET}"
            echo "${COLOR_YELLOW}Inspect it; if it is safe to replace, remove it and re-run this script.${COLOR_RESET}"
            echo
            exit 1
        fi
    fi

    # If something exists at SHIM_PATH that we did not write, do not overwrite it
    # silently — it could be the user's own script.
    if [[ -e "${SHIM_PATH}" ]] && ! grep -qF "${SHIM_MARKER}" "${SHIM_PATH}"; then
        echo
        echo "${COLOR_RED}${SHIM_PATH} already exists and is not the breeze shim managed by this script.${COLOR_RESET}"
        echo "${COLOR_YELLOW}Inspect it; if it is safe to replace, remove it and re-run this script.${COLOR_RESET}"
        echo
        exit 1
    fi

    if [[ -f "${SHIM_PATH}" ]] && grep -qF "${SHIM_MARKER}" "${SHIM_PATH}"; then
        # Refresh in place — body might have changed across releases.
        printf '%s\n' "${BREEZE_SHIM_BODY}" > "${SHIM_PATH}"
        chmod +x "${SHIM_PATH}"
        echo "${COLOR_GREEN}Refreshed breeze shim at ${SHIM_PATH}.${COLOR_RESET}"
        return
    fi

    export TIMEOUT=0
    if "${MY_DIR}/confirm" "Install breeze shim at ${SHIM_PATH}"; then
        printf '%s\n' "${BREEZE_SHIM_BODY}" > "${SHIM_PATH}"
        chmod +x "${SHIM_PATH}"
        echo "${COLOR_GREEN}Installed breeze shim at ${SHIM_PATH}.${COLOR_RESET}"
    else
        manual_instructions
    fi
}

ensure_uv_installed
fail_on_legacy_global_install
install_breeze_shim
check_shim_dir_on_path

echo
echo "${COLOR_GREEN}Breeze is configured. Run 'breeze' from any Airflow worktree.${COLOR_RESET}"
echo