| .. Licensed to the Apache Software Foundation (ASF) under one |
| or more contributor license agreements. See the NOTICE file |
| distributed with this work for additional information |
| regarding copyright ownership. The ASF licenses this file |
| to you under the Apache License, Version 2.0 (the |
| "License"); you may not use this file except in compliance |
| with the License. You may obtain a copy of the License at |
| |
| .. http://www.apache.org/licenses/LICENSE-2.0 |
| |
| .. Unless required by applicable law or agreed to in writing, |
| software distributed under the License is distributed on an |
| "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| KIND, either express or implied. See the License for the |
| specific language governing permissions and limitations |
| under the License. |
| |
| DAG Runs |
| ========= |
| A DAG Run is an object representing an instantiation of the DAG in time. |
| Any time the DAG is executed, a DAG Run is created and all tasks inside it are executed. The status of the DAG Run depends on the tasks states. |
| Each DAG Run is run separately from another, meaning that you can have running DAG many times at the same time. |
| |
| .. _dag-run:dag-run-status: |
| |
| DAG Run Status |
| '''''''''''''' |
| |
| A DAG Run status is determined when the execution of the DAG is finished. |
| The execution of the DAG depends on its containing tasks and their dependencies. |
| The status is assigned to the DAG Run when all of the tasks are in the one of the terminal states (i.e. if there is no possible transition to another state) like ``success``, ``failed`` or ``skipped``. |
| The DAG Run is having the status assigned based on the so-called "leaf nodes" or simply "leaves". Leaf nodes are the tasks with no children. |
| |
| There are two possible terminal states for the DAG Run: |
| |
| - ``success`` if all of the leaf nodes states are either ``success`` or ``skipped``, |
| - ``failed`` if any of the leaf nodes state is either ``failed`` or ``upstream_failed``. |
| |
| .. note:: |
| Be careful if some of your tasks have defined some specific `trigger rule <dags.html#trigger-rules>`_. |
| These can lead to some unexpected behavior, e.g. if you have a leaf task with trigger rule `"all_done"`, it will be executed regardless of the states of the rest of the tasks and if it will succeed, then the whole DAG Run will also be marked as ``success``, even if something failed in the middle. |
| |
| Cron Presets |
| '''''''''''' |
| |
| Each DAG may or may not have a schedule, which informs how DAG Runs are |
| created. ``schedule_interval`` is defined as a DAG argument, which can be passed a |
| `cron expression <https://en.wikipedia.org/wiki/Cron#CRON_expression>`_ as |
| a ``str``, a ``datetime.timedelta`` object, or one of the following cron "presets". |
| |
| .. tip:: |
| You can use an online editor for CRON expressions such as `Crontab guru <https://crontab.guru/>`_ |
| |
| +----------------+----------------------------------------------------------------+-----------------+ |
| | preset | meaning | cron | |
| +================+================================================================+=================+ |
| | ``None`` | Don't schedule, use for exclusively "externally triggered" | | |
| | | DAGs | | |
| +----------------+----------------------------------------------------------------+-----------------+ |
| | ``@once`` | Schedule once and only once | | |
| +----------------+----------------------------------------------------------------+-----------------+ |
| | ``@hourly`` | Run once an hour at the beginning of the hour | ``0 * * * *`` | |
| +----------------+----------------------------------------------------------------+-----------------+ |
| | ``@daily`` | Run once a day at midnight | ``0 0 * * *`` | |
| +----------------+----------------------------------------------------------------+-----------------+ |
| | ``@weekly`` | Run once a week at midnight on Sunday morning | ``0 0 * * 0`` | |
| +----------------+----------------------------------------------------------------+-----------------+ |
| | ``@monthly`` | Run once a month at midnight of the first day of the month | ``0 0 1 * *`` | |
| +----------------+----------------------------------------------------------------+-----------------+ |
| | ``@quarterly`` | Run once a quarter at midnight on the first day | ``0 0 1 */3 *`` | |
| +----------------+----------------------------------------------------------------+-----------------+ |
| | ``@yearly`` | Run once a year at midnight of January 1 | ``0 0 1 1 *`` | |
| +----------------+----------------------------------------------------------------+-----------------+ |
| |
| Your DAG will be instantiated for each schedule along with a corresponding |
| DAG Run entry in the database backend. |
| |
| |
| .. _data-interval: |
| |
| Data Interval |
| ------------- |
| |
| Each DAG run in Airflow has an assigned "data interval" that represents the time |
| range it operates in. For a DAG scheduled with ``@daily``, for example, each of |
| its data interval would start at midnight of each day and end at midnight of the |
| next day. |
| |
| A DAG run is usually scheduled *after* its associated data interval has ended, |
| to ensure the run is able to collect all the data within the time period. In |
| other words, a run covering the data period of 2020-01-01 generally does not |
| start to run until 2020-01-01 has ended, i.e. after 2020-01-02 00:00:00. |
| |
| All dates in Airflow are tied to the data interval concept in some way. The |
| "logical date" (also called ``execution_date`` in Airflow versions prior to 2.2) |
| of a DAG run, for example, denotes the start of the data interval, not when the |
| DAG is actually executed. |
| |
| Similarly, since the ``start_date`` argument for the DAG and its tasks points to |
| the same logical date, it marks the start of *the DAG's first data interval*, not |
| when tasks in the DAG will start running. In other words, a DAG run will only be |
| scheduled one interval after ``start_date``. |
| |
| .. tip:: |
| |
| If ``schedule_interval`` is not enough to express your DAG's schedule, |
| logical date, or data interval, see :doc:`/concepts/timetable`. |
| For more information on ``logical date``, see :ref:`concepts:dag-run` and |
| :ref:`faq:what-does-execution-date-mean` |
| |
| Re-run DAG |
| '''''''''' |
| There can be cases where you will want to execute your DAG again. One such case is when the scheduled |
| DAG run fails. |
| |
| .. _dag-catchup: |
| |
| Catchup |
| ------- |
| |
| An Airflow DAG with a ``start_date``, possibly an ``end_date``, and a ``schedule_interval`` defines a |
| series of intervals which the scheduler turns into individual DAG Runs and executes. The scheduler, by default, will |
| kick off a DAG Run for any data interval that has not been run since the last data interval (or has been cleared). This concept is called Catchup. |
| |
| If your DAG is not written to handle its catchup (i.e., not limited to the interval, but instead to ``Now`` for instance.), |
| then you will want to turn catchup off. This can be done by setting ``catchup = False`` in DAG or ``catchup_by_default = False`` |
| in the configuration file. When turned off, the scheduler creates a DAG run only for the latest interval. |
| |
| .. code-block:: python |
| |
| """ |
| Code that goes along with the Airflow tutorial located at: |
| https://github.com/apache/airflow/blob/main/airflow/example_dags/tutorial.py |
| """ |
| from airflow.models.dag import DAG |
| from airflow.operators.bash import BashOperator |
| |
| import datetime |
| import pendulum |
| |
| dag = DAG( |
| "tutorial", |
| default_args={ |
| "depends_on_past": True, |
| "retries": 1, |
| "retry_delay": datetime.timedelta(minutes=3), |
| }, |
| start_date=pendulum.datetime(2015, 12, 1, tz="UTC"), |
| description="A simple tutorial DAG", |
| schedule_interval="@daily", |
| catchup=False, |
| ) |
| |
| In the example above, if the DAG is picked up by the scheduler daemon on |
| 2016-01-02 at 6 AM, (or from the command line), a single DAG Run will be created |
| with a data between 2016-01-01 and 2016-01-02, and the next one will be created |
| just after midnight on the morning of 2016-01-03 with a data interval between |
| 2016-01-02 and 2016-01-03. |
| |
| If the ``dag.catchup`` value had been ``True`` instead, the scheduler would have created a DAG Run |
| for each completed interval between 2015-12-01 and 2016-01-02 (but not yet one for 2016-01-02, |
| as that interval hasn’t completed) and the scheduler will execute them sequentially. |
| |
| Catchup is also triggered when you turn off a DAG for a specified period and then re-enable it. |
| |
| This behavior is great for atomic datasets that can easily be split into periods. Turning catchup off is great |
| if your DAG performs catchup internally. |
| |
| |
| Backfill |
| --------- |
| There can be the case when you may want to run the DAG for a specified historical period e.g., |
| A data filling DAG is created with ``start_date`` **2019-11-21**, but another user requires the output data from a month ago i.e., **2019-10-21**. |
| This process is known as Backfill. |
| |
| You may want to backfill the data even in the cases when catchup is disabled. This can be done through CLI. |
| Run the below command |
| |
| .. code-block:: bash |
| |
| airflow dags backfill \ |
| --start-date START_DATE \ |
| --end-date END_DATE \ |
| dag_id |
| |
| The `backfill command <cli-and-env-variables-ref.html#backfill>`_ will re-run all the instances of the dag_id for all the intervals within the start date and end date. |
| |
| Re-run Tasks |
| ------------ |
| Some of the tasks can fail during the scheduled run. Once you have fixed |
| the errors after going through the logs, you can re-run the tasks by clearing them for the |
| scheduled date. Clearing a task instance doesn't delete the task instance record. |
| Instead, it updates ``max_tries`` to ``0`` and sets the current task instance state to ``None``, which causes the task to re-run. |
| |
| Click on the failed task in the Tree or Graph views and then click on **Clear**. |
| The executor will re-run it. |
| |
| There are multiple options you can select to re-run - |
| |
| * **Past** - All the instances of the task in the runs before the DAG's most recent data interval |
| * **Future** - All the instances of the task in the runs after the DAG's most recent data interval |
| * **Upstream** - The upstream tasks in the current DAG |
| * **Downstream** - The downstream tasks in the current DAG |
| * **Recursive** - All the tasks in the child DAGs and parent DAGs |
| * **Failed** - Only the failed tasks in the DAG's most recent run |
| |
| You can also clear the task through CLI using the command: |
| |
| .. code-block:: bash |
| |
| airflow tasks clear dag_id \ |
| --task-regex task_regex \ |
| --start-date START_DATE \ |
| --end-date END_DATE |
| |
| For the specified ``dag_id`` and time interval, the command clears all instances of the tasks matching the regex. |
| For more options, you can check the help of the `clear command <cli-ref.html#clear>`_ : |
| |
| .. code-block:: bash |
| |
| airflow tasks clear --help |
| |
| External Triggers |
| ''''''''''''''''' |
| |
| Note that DAG Runs can also be created manually through the CLI. Just run the command - |
| |
| .. code-block:: bash |
| |
| airflow dags trigger --exec-date logical_date run_id |
| |
| The DAG Runs created externally to the scheduler get associated with the trigger’s timestamp and are displayed |
| in the UI alongside scheduled DAG runs. The logical date passed inside the DAG can be specified using the ``-e`` argument. |
| The default is the current date in the UTC timezone. |
| |
| In addition, you can also manually trigger a DAG Run using the web UI (tab **DAGs** -> column **Links** -> button **Trigger Dag**) |
| |
| .. _dagrun:parameters: |
| |
| Passing Parameters when triggering dags |
| ------------------------------------------ |
| |
| When triggering a DAG from the CLI, the REST API or the UI, it is possible to pass configuration for a DAG Run as |
| a JSON blob. |
| |
| Example of a parameterized DAG: |
| |
| .. code-block:: python |
| |
| import pendulum |
| |
| from airflow import DAG |
| from airflow.operators.bash import BashOperator |
| |
| dag = DAG( |
| "example_parameterized_dag", |
| schedule_interval=None, |
| start_date=pendulum.datetime(2021, 1, 1, tz="UTC"), |
| catchup=False, |
| ) |
| |
| parameterized_task = BashOperator( |
| task_id="parameterized_task", |
| bash_command="echo value: {{ dag_run.conf['conf1'] }}", |
| dag=dag, |
| ) |
| |
| |
| **Note**: The parameters from ``dag_run.conf`` can only be used in a template field of an operator. |
| |
| Using CLI |
| ^^^^^^^^^^^ |
| |
| .. code-block:: bash |
| |
| airflow dags trigger --conf '{"conf1": "value1"}' example_parameterized_dag |
| |
| Using UI |
| ^^^^^^^^^^ |
| |
| .. image:: img/example_passing_conf.png |
| |
| To Keep in Mind |
| '''''''''''''''' |
| * Marking task instances as failed can be done through the UI. This can be used to stop running task instances. |
| * Marking task instances as successful can be done through the UI. This is mostly to fix false negatives, or |
| for instance, when the fix has been applied outside of Airflow. |