docs-archive/1.10.13/_sources/tutorial.rst.txt

 .. Licensed to the Apache Software Foundation (ASF) under one
    or more contributor license agreements.  See the NOTICE file
    distributed with this work for additional information
    regarding copyright ownership.  The ASF licenses this file
    to you under the Apache License, Version 2.0 (the
    "License"); you may not use this file except in compliance
    with the License.  You may obtain a copy of the License at

 ..   http://www.apache.org/licenses/LICENSE-2.0

 .. Unless required by applicable law or agreed to in writing,
    software distributed under the License is distributed on an
    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    KIND, either express or implied.  See the License for the
    specific language governing permissions and limitations
    under the License.




Tutorial
================

This tutorial walks you through some of the fundamental Airflow concepts,
objects, and their usage while writing your first pipeline.

Example Pipeline definition
---------------------------

Here is an example of a basic pipeline definition. Do not worry if this looks
complicated, a line by line explanation follows below.

.. exampleinclude:: ../airflow/example_dags/tutorial.py
    :language: python
    :start-after: [START tutorial]
    :end-before: [END tutorial]

It's a DAG definition file
--------------------------

One thing to wrap your head around (it may not be very intuitive for everyone
at first) is that this Airflow Python script is really
just a configuration file specifying the DAG's structure as code.
The actual tasks defined here will run in a different context from
the context of this script. Different tasks run on different workers
at different points in time, which means that this script cannot be used
to cross communicate between tasks. Note that for this
purpose we have a more advanced feature called ``XCom``.

People sometimes think of the DAG definition file as a place where they
can do some actual data processing - that is not the case at all!
The script's purpose is to define a DAG object. It needs to evaluate
quickly (seconds, not minutes) since the scheduler will execute it
periodically to reflect the changes if any.


Importing Modules
-----------------

An Airflow pipeline is just a Python script that happens to define an
Airflow DAG object. Let's start by importing the libraries we will need.

.. exampleinclude:: ../airflow/example_dags/tutorial.py
    :language: python
    :start-after: [START import_module]
    :end-before: [END import_module]

Default Arguments
-----------------
We're about to create a DAG and some tasks, and we have the choice to
explicitly pass a set of arguments to each task's constructor
(which would become redundant), or (better!) we can define a dictionary
of default parameters that we can use when creating tasks.

.. exampleinclude:: ../airflow/example_dags/tutorial.py
    :language: python
    :start-after: [START default_args]
    :end-before: [END default_args]

For more information about the BaseOperator's parameters and what they do,
refer to the :py:class:`airflow.models.BaseOperator` documentation.

Also, note that you could easily define different sets of arguments that
would serve different purposes. An example of that would be to have
different settings between a production and development environment.


Instantiate a DAG
-----------------

We'll need a DAG object to nest our tasks into. Here we pass a string
that defines the ``dag_id``, which serves as a unique identifier for your DAG.
We also pass the default argument dictionary that we just defined and
define a ``schedule_interval`` of 1 day for the DAG.

.. exampleinclude:: ../airflow/example_dags/tutorial.py
    :language: python
    :start-after: [START instantiate_dag]
    :end-before: [END instantiate_dag]

Tasks
-----
Tasks are generated when instantiating operator objects. An object
instantiated from an operator is called a constructor. The first argument
``task_id`` acts as a unique identifier for the task.

.. exampleinclude:: ../airflow/example_dags/tutorial.py
    :language: python
    :start-after: [START basic_task]
    :end-before: [END basic_task]

Notice how we pass a mix of operator specific arguments (``bash_command``) and
an argument common to all operators (``retries``) inherited
from BaseOperator to the operator's constructor. This is simpler than
passing every argument for every constructor call. Also, notice that in
the second task we override the ``retries`` parameter with ``3``.

The precedence rules for a task are as follows:

1.  Explicitly passed arguments
2.  Values that exist in the ``default_args`` dictionary
3.  The operator's default value, if one exists

A task must include or inherit the arguments ``task_id`` and ``owner``,
otherwise Airflow will raise an exception.

Templating with Jinja
---------------------
Airflow leverages the power of
`Jinja Templating <https://jinja.palletsprojects.com/>`_  and provides
the pipeline author
with a set of built-in parameters and macros. Airflow also provides
hooks for the pipeline author to define their own parameters, macros and
templates.

This tutorial barely scratches the surface of what you can do with
templating in Airflow, but the goal of this section is to let you know
this feature exists, get you familiar with double curly brackets, and
point to the most common template variable: ``{{ ds }}`` (today's "date
stamp").

.. exampleinclude:: ../airflow/example_dags/tutorial.py
    :language: python
    :start-after: [START jinja_template]
    :end-before: [END jinja_template]

Notice that the ``templated_command`` contains code logic in ``{% %}`` blocks,
references parameters like ``{{ ds }}``, calls a function as in
``{{ macros.ds_add(ds, 7)}}``, and references a user-defined parameter
in ``{{ params.my_param }}``.

The ``params`` hook in ``BaseOperator`` allows you to pass a dictionary of
parameters and/or objects to your templates. Please take the time
to understand how the parameter ``my_param`` makes it through to the template.

Files can also be passed to the ``bash_command`` argument, like
``bash_command='templated_command.sh'``, where the file location is relative to
the directory containing the pipeline file (``tutorial.py`` in this case). This
may be desirable for many reasons, like separating your script's logic and
pipeline code, allowing for proper code highlighting in files composed in
different languages, and general flexibility in structuring pipelines. It is
also possible to define your ``template_searchpath`` as pointing to any folder
locations in the DAG constructor call.

Using that same DAG constructor call, it is possible to define
``user_defined_macros`` which allow you to specify your own variables.
For example, passing ``dict(foo='bar')`` to this argument allows you
to use ``{{ foo }}`` in your templates. Moreover, specifying
``user_defined_filters`` allow you to register you own filters. For example,
passing ``dict(hello=lambda name: 'Hello %s' % name)`` to this argument allows
you to use ``{{ 'world' | hello }}`` in your templates. For more information
regarding custom filters have a look at the
`Jinja Documentation <http://jinja.pocoo.org/docs/dev/api/#writing-filters>`_

For more information on the variables and macros that can be referenced
in templates, make sure to read through the :doc:`macros-ref`

Adding DAG and Tasks documentation
----------------------------------
We can add documentation for DAG or each single task. DAG documentation only support
markdown so far and task documentation support plain text, markdown, reStructuredText,
json, yaml

.. exampleinclude:: ../airflow/example_dags/tutorial.py
    :language: python
    :start-after: [START documentation]
    :end-before: [END documentation]

Setting up Dependencies
-----------------------
We have tasks ``t1``, ``t2`` and ``t3`` that do not depend on each other. Here's a few ways
you can define dependencies between them:

.. code-block:: python

    t1.set_downstream(t2)

    # This means that t2 will depend on t1
    # running successfully to run.
    # It is equivalent to:
    t2.set_upstream(t1)

    # The bit shift operator can also be
    # used to chain operations:
    t1 >> t2

    # And the upstream dependency with the
    # bit shift operator:
    t2 << t1

    # Chaining multiple dependencies becomes
    # concise with the bit shift operator:
    t1 >> t2 >> t3

    # A list of tasks can also be set as
    # dependencies. These operations
    # all have the same effect:
    t1.set_downstream([t2, t3])
    t1 >> [t2, t3]
    [t2, t3] << t1

Note that when executing your script, Airflow will raise exceptions when
it finds cycles in your DAG or when a dependency is referenced more
than once.

Recap
-----
Alright, so we have a pretty basic DAG. At this point your code should look
something like this:

.. exampleinclude:: ../airflow/example_dags/tutorial.py
    :language: python
    :start-after: [START tutorial]
    :end-before: [END tutorial]

.. _testing:

Testing
--------

Running the Script
''''''''''''''''''

Time to run some tests. First, let's make sure the pipeline
is parsed successfully.

Let's assume we're saving the code from the previous step in
``tutorial.py`` in the DAGs folder referenced in your ``airflow.cfg``.
The default location for your DAGs is ``~/airflow/dags``.

.. code-block:: bash

    python ~/airflow/dags/tutorial.py

If the script does not raise an exception it means that you haven't done
anything horribly wrong, and that your Airflow environment is somewhat
sound.

Command Line Metadata Validation
'''''''''''''''''''''''''''''''''
Let's run a few commands to validate this script further.

.. code-block:: bash

    # print the list of active DAGs
    airflow list_dags

    # prints the list of tasks the "tutorial" dag_id
    airflow list_tasks tutorial

    # prints the hierarchy of tasks in the tutorial DAG
    airflow list_tasks tutorial --tree


Testing
'''''''
Let's test by running the actual task instances for a specific date. The
date specified in this context is called ``execution_date``. This is the
*logical* date, which simulates the scheduler running your task or dag at
a specific date and time, even though it *physically* will run now (
or as soon as its dependencies are met).

.. code-block:: bash

    # command layout: command subcommand dag_id task_id date

    # testing print_date
    airflow test tutorial print_date 2015-06-01

    # testing sleep
    airflow test tutorial sleep 2015-06-01

Now remember what we did with templating earlier? See how this template
gets rendered and executed by running this command:

.. code-block:: bash

    # testing templated
    airflow test tutorial templated 2015-06-01

This should result in displaying a verbose log of events and ultimately
running your bash command and printing the result.

Note that the ``airflow test`` command runs task instances locally, outputs
their log to stdout (on screen), doesn't bother with dependencies, and
doesn't communicate state (running, success, failed, ...) to the database.
It simply allows testing a single task instance.

Backfill
''''''''
Everything looks like it's running fine so let's run a backfill.
``backfill`` will respect your dependencies, emit logs into files and talk to
the database to record status. If you do have a webserver up, you'll be able
to track the progress. ``airflow webserver`` will start a web server if you
are interested in tracking the progress visually as your backfill progresses.

Note that if you use ``depends_on_past=True``, individual task instances
will depend on the success of their previous task instance (that is, previous
according to ``execution_date``). Task instances with ``execution_date==start_date``
will disregard this dependency because there would be no
past task instances created for them.

You may also want to consider ``wait_for_downstream=True`` when using ``depends_on_past=True``.
While ``depends_on_past=True`` causes a task instance to depend on the success
of its previous task_instance, ``wait_for_downstream=True`` will cause a task instance
to also wait for all task instances *immediately downstream* of the previous
task instance to succeed.

The date range in this context is a ``start_date`` and optionally an ``end_date``,
which are used to populate the run schedule with task instances from this dag.

.. code-block:: bash

    # optional, start a web server in debug mode in the background
    # airflow webserver --debug &

    # start your backfill on a date range
    airflow backfill tutorial -s 2015-06-01 -e 2015-06-07

What's Next?
-------------
That's it, you've written, tested and backfilled your very first Airflow
pipeline. Merging your code into a code repository that has a master scheduler
running against it should get it to get triggered and run every day.

Here's a few things you might want to do next:

.. seealso::
    - Read the :ref:`Concepts page<concepts>` for detailed explanation
      of Airflow concepts such as DAGs, Tasks, Operators, etc.
    - Take an in-depth tour of the UI - click all the things!
    - Keep reading the docs!

      - Review the :doc:`how-to guides<howto/index>`, which include a guide to writing your own operator
      - Review the :ref:`Command Line Interface Reference<cli>`
      - Review the :ref:`List of operators <pythonapi:operators>`
      - Review the :ref:`Macros reference<macros>`
    - Write your first pipeline!