| <?xml version='1.0'?> |
| <!-- |
| Licensed to the Apache Software Foundation (ASF) under one |
| or more contributor license agreements. See the NOTICE file |
| distributed with this work for additional information |
| regarding copyright ownership. The ASF licenses this file |
| to you under the Apache License, Version 2.0 (the |
| "License"); you may not use this file except in compliance |
| with the License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, |
| software distributed under the License is distributed on an |
| "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| KIND, either express or implied. See the License for the |
| specific language governing permissions and limitations |
| under the License. |
| --> |
| |
| <configuration xmlns="urn:activemq" |
| xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" |
| xmlns:xi="http://www.w3.org/2001/XInclude" |
| xsi:schemaLocation="urn:activemq /schema/artemis-configuration.xsd"> |
| |
| <core xmlns="urn:activemq:core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" |
| xsi:schemaLocation="urn:activemq:core "> |
| |
| <name>ServerA</name> |
| |
| <persistence-enabled>true</persistence-enabled> |
| |
| <security-enabled>false</security-enabled> |
| |
| <!-- this could be ASYNCIO, MAPPED, NIO |
| ASYNCIO: Linux Libaio |
| MAPPED: mmap files |
| NIO: Plain Java Files |
| --> |
| <journal-type>NIO</journal-type> |
| |
| <paging-directory>data/paging</paging-directory> |
| |
| <bindings-directory>data/bindings</bindings-directory> |
| |
| <journal-directory>data/journal</journal-directory> |
| |
| <large-messages-directory>data/large-messages</large-messages-directory> |
| |
| <journal-datasync>true</journal-datasync> |
| |
| <journal-min-files>2</journal-min-files> |
| |
| <journal-pool-files>10</journal-pool-files> |
| |
| <journal-device-block-size>4096</journal-device-block-size> |
| |
| <journal-file-size>10M</journal-file-size> |
| |
| <!-- |
| This value was determined through a calculation. |
| Your system could perform 25 writes per millisecond |
| on the current journal configuration. |
| That translates as a sync write every 40000 nanoseconds. |
| |
| Note: If you specify 0 the system will perform writes directly to the disk. |
| We recommend this to be 0 if you are using journalType=MAPPED and journal-datasync=false. |
| --> |
| <journal-buffer-timeout>40000</journal-buffer-timeout> |
| |
| |
| <!-- |
| When using ASYNCIO, this will determine the writing queue depth for libaio. |
| --> |
| <journal-max-io>1</journal-max-io> |
| <!-- |
| You can verify the network health of a particular NIC by specifying the <network-check-NIC> element. |
| <network-check-NIC>theNicName</network-check-NIC> |
| --> |
| |
| <!-- |
| Use this to use an HTTP server to validate the network |
| <network-check-URL-list>http://www.apache.org</network-check-URL-list> --> |
| |
| <!-- <network-check-period>10000</network-check-period> --> |
| <!-- <network-check-timeout>1000</network-check-timeout> --> |
| |
| <!-- this is a comma separated list, no spaces, just DNS or IPs |
| it should accept IPV6 |
| |
| Warning: Make sure you understand your network topology as this is meant to validate if your network is valid. |
| Using IPs that could eventually disappear or be partially visible may defeat the purpose. |
| You can use a list of multiple IPs, and if any successful ping will make the server OK to continue running --> |
| <!-- <network-check-list>10.0.0.1</network-check-list> --> |
| |
| <!-- use this to customize the ping used for ipv4 addresses --> |
| <!-- <network-check-ping-command>ping -c 1 -t %d %s</network-check-ping-command> --> |
| |
| <!-- use this to customize the ping used for ipv6 addresses --> |
| <!-- <network-check-ping6-command>ping6 -c 1 %2$s</network-check-ping6-command> --> |
| |
| |
| |
| <!-- how often we are looking for how many bytes are being used on the disk in ms --> |
| <disk-scan-period>5000</disk-scan-period> |
| |
| <!-- once the disk hits this limit the system will block, or close the connection in certain protocols |
| that won't support flow control. --> |
| <max-disk-usage>90</max-disk-usage> |
| |
| <!-- should the broker detect dead locks and other issues --> |
| <critical-analyzer>true</critical-analyzer> |
| |
| <critical-analyzer-timeout>120000</critical-analyzer-timeout> |
| |
| <critical-analyzer-check-period>60000</critical-analyzer-check-period> |
| |
| <critical-analyzer-policy>HALT</critical-analyzer-policy> |
| |
| |
| <page-sync-timeout>40000</page-sync-timeout> |
| |
| |
| <acceptors> |
| <acceptor name="artemis">tcp://0.0.0.0:61616?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;amqpMinLargeMessageSize=102400;protocols=CORE,AMQP,STOMP,HORNETQ,MQTT,OPENWIRE;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpDuplicateDetection=true</acceptor> |
| </acceptors> |
| |
| |
| <security-settings> |
| <security-setting match="#"> |
| <permission type="createNonDurableQueue" roles="amq"/> |
| <permission type="deleteNonDurableQueue" roles="amq"/> |
| <permission type="createDurableQueue" roles="amq"/> |
| <permission type="deleteDurableQueue" roles="amq"/> |
| <permission type="createAddress" roles="amq"/> |
| <permission type="deleteAddress" roles="amq"/> |
| <permission type="consume" roles="amq"/> |
| <permission type="browse" roles="amq"/> |
| <permission type="send" roles="amq"/> |
| <!-- we need this otherwise ./artemis data imp wouldn't work --> |
| <permission type="manage" roles="amq"/> |
| </security-setting> |
| </security-settings> |
| |
| <address-settings> |
| <!-- if you define auto-create on certain queues, management has to be auto-create --> |
| <address-setting match="activemq.management#"> |
| <dead-letter-address>DLQ</dead-letter-address> |
| <expiry-address>ExpiryQueue</expiry-address> |
| <redelivery-delay>0</redelivery-delay> |
| <!-- with -1 only the global-max-size is in use for limiting --> |
| <max-size-bytes>-1</max-size-bytes> |
| <message-counter-history-day-limit>10</message-counter-history-day-limit> |
| <address-full-policy>PAGE</address-full-policy> |
| <auto-create-queues>true</auto-create-queues> |
| <auto-create-addresses>true</auto-create-addresses> |
| <auto-create-jms-queues>true</auto-create-jms-queues> |
| <auto-create-jms-topics>true</auto-create-jms-topics> |
| </address-setting> |
| <!--default for catch all--> |
| <address-setting match="#"> |
| <dead-letter-address>DLQ</dead-letter-address> |
| <expiry-address>ExpiryQueue</expiry-address> |
| <redelivery-delay>0</redelivery-delay> |
| <!-- with -1 only the global-max-size is in use for limiting --> |
| <max-size-bytes>-1</max-size-bytes> |
| <message-counter-history-day-limit>10</message-counter-history-day-limit> |
| <address-full-policy>PAGE</address-full-policy> |
| <auto-create-queues>true</auto-create-queues> |
| <auto-create-addresses>true</auto-create-addresses> |
| <auto-create-jms-queues>true</auto-create-jms-queues> |
| <auto-create-jms-topics>true</auto-create-jms-topics> |
| </address-setting> |
| </address-settings> |
| |
| <addresses> |
| <address name="DLQ"> |
| <anycast> |
| <queue name="DLQ" /> |
| </anycast> |
| </address> |
| <address name="ExpiryQueue"> |
| <anycast> |
| <queue name="ExpiryQueue" /> |
| </anycast> |
| </address> |
| <address name="someQueue"> |
| <anycast> |
| <queue name="someQueue" /> |
| </anycast> |
| </address> |
| </addresses> |
| |
| |
| <!-- Uncomment the following if you want to use the Standard LoggingActiveMQServerPlugin pluging to log in events |
| <broker-plugins> |
| <broker-plugin class-name="org.apache.activemq.artemis.core.server.plugin.impl.LoggingActiveMQServerPlugin"> |
| <property key="LOG_ALL_EVENTS" value="true"/> |
| <property key="LOG_CONNECTION_EVENTS" value="true"/> |
| <property key="LOG_SESSION_EVENTS" value="true"/> |
| <property key="LOG_CONSUMER_EVENTS" value="true"/> |
| <property key="LOG_DELIVERING_EVENTS" value="true"/> |
| <property key="LOG_SENDING_EVENTS" value="true"/> |
| <property key="LOG_INTERNAL_EVENTS" value="true"/> |
| </broker-plugin> |
| </broker-plugins> |
| --> |
| |
| </core> |
| </configuration> |