| # |
| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # Check if this GO tools version used is at least the version of go specified in |
| # the go.mod file. The version in go.mod should be in sync with other repos. |
| GO_VERSION := $(shell go version | awk '{print substr($$3, 3, 10)}') |
| MOD_VERSION := $(shell cat .go_version) |
| |
| GM := $(word 1,$(subst ., ,$(GO_VERSION))) |
| MM := $(word 1,$(subst ., ,$(MOD_VERSION))) |
| FAIL := $(shell if [ $(GM) -lt $(MM) ]; then echo MAJOR; fi) |
| ifdef FAIL |
| $(error Build should be run with at least go $(MOD_VERSION) or later, found $(GO_VERSION)) |
| endif |
| GM := $(word 2,$(subst ., ,$(GO_VERSION))) |
| MM := $(word 2,$(subst ., ,$(MOD_VERSION))) |
| FAIL := $(shell if [ $(GM) -lt $(MM) ]; then echo MINOR; fi) |
| ifdef FAIL |
| $(error Build should be run with at least go $(MOD_VERSION) or later, found $(GO_VERSION)) |
| endif |
| |
| # Make sure we are in the same directory as the Makefile |
| BASE_DIR := $(dir $(abspath $(lastword $(MAKEFILE_LIST)))) |
| |
| OUTPUT=bin |
| DEV_BIN_DIR=${OUTPUT}/dev |
| RELEASE_BIN_DIR=${OUTPUT}/prod |
| SERVER_BINARY=yunikorn-web |
| REPO=github.com/apache/yunikorn-web/pkg |
| |
| # Version parameters |
| DATE=$(shell date +%FT%T%z) |
| ifeq ($(VERSION),) |
| VERSION := latest |
| endif |
| |
| # Image build parameters |
| # This tag of the image must be changed when pushed to a public repository. |
| ifeq ($(REGISTRY),) |
| REGISTRY := apache |
| endif |
| |
| # Set the default web port |
| PORT=9889 |
| |
| # Allow architecture to be overwritten |
| ifeq ($(HOST_ARCH),) |
| HOST_ARCH := $(shell uname -m) |
| endif |
| |
| # Build architecture settings: |
| # EXEC_ARCH defines the architecture of the executables that gets compiled |
| # DOCKER_ARCH defines the architecture of the docker image |
| # Both vars must be set, an unknown architecture defaults to amd64 |
| ifeq (x86_64, $(HOST_ARCH)) |
| EXEC_ARCH := amd64 |
| DOCKER_ARCH := amd64 |
| else ifeq (i386, $(HOST_ARCH)) |
| EXEC_ARCH := 386 |
| DOCKER_ARCH := i386 |
| else ifneq (,$(filter $(HOST_ARCH), arm64 aarch64)) |
| EXEC_ARCH := arm64 |
| DOCKER_ARCH := arm64v8 |
| else ifeq (armv7l, $(HOST_ARCH)) |
| EXEC_ARCH := arm |
| DOCKER_ARCH := arm32v7 |
| else |
| $(info Unknown architecture "${HOST_ARCH}" defaulting to: amd64) |
| EXEC_ARCH := amd64 |
| DOCKER_ARCH := amd64 |
| endif |
| |
| WEB_SHA=$(shell git rev-parse --short=12 HEAD) |
| |
| all: |
| $(MAKE) -C $(dir $(BASE_DIR)) build |
| |
| LINTBASE := $(shell go env GOPATH)/bin |
| LINTBIN := $(LINTBASE)/golangci-lint |
| $(LINTBIN): |
| curl -sSfL https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s -- -b $(LINTBASE) v1.51.2 |
| stat $@ > /dev/null 2>&1 |
| |
| # Run lint against the previous commit for PR and branch build |
| # In dev setup look at all changes on top of master |
| .PHONY: lint |
| lint: $(LINTBIN) |
| @echo "running golangci-lint" |
| git symbolic-ref -q HEAD && REV="origin/HEAD" || REV="HEAD^" ; \ |
| headSHA=$$(git rev-parse --short=12 $${REV}) ; \ |
| echo "checking against commit sha $${headSHA}" ; \ |
| ${LINTBIN} run --new-from-rev=$${headSHA} |
| |
| .PHONY: license-check |
| # This is a bit convoluted but using a recursive grep on linux fails to write anything when run |
| # from the Makefile. That caused the pull-request license check run from the github action to |
| # always pass. The syntax for find is slightly different too but that at least works in a similar |
| # way on both Mac and Linux. Excluding all .git* files from the checks. |
| OS := $(shell uname -s | tr '[:upper:]' '[:lower:]') |
| license-check: |
| @echo "checking license headers:" |
| ifeq (darwin,$(OS)) |
| $(shell find -E . ! -path "./.git*" ! -path "./node_modules*" ! -path "./dist*" -regex ".*\.(sh|md|conf|yaml|yml|js|ts|html|js|scss)" -exec grep -L "Licensed to the Apache Software Foundation" {} \; > LICRES) |
| else |
| $(shell find . ! -path "./.git*" ! -path "./node_modules*" ! -path "./dist*" -regex ".*\.\(sh\|md\|conf\|yaml\|yml\|js\|ts\|html\|js\|scss\)" -exec grep -L "Licensed to the Apache Software Foundation" {} \; > LICRES) |
| endif |
| @if [ -s LICRES ]; then \ |
| echo "following files are missing license header:" ; \ |
| cat LICRES ; \ |
| rm -f LICRES ; \ |
| exit 1; \ |
| fi ; \ |
| rm -f LICRES |
| @echo " all OK" |
| |
| # Start web interface in a local dev setup |
| .PHONY: start-dev |
| start-dev: |
| yarn start:srv & yarn start |
| |
| # Build the web interface for dev and test |
| .PHONY: build |
| build: |
| PUPPETEER_SKIP_CHROMIUM_DOWNLOAD=1 && yarn install && ng build |
| |
| # Run JS unit tests |
| .PHONY: test_js |
| test_js: build |
| yarn test:singleRun |
| |
| # Run Go unit tests |
| .PHONY: test_go |
| test_go: |
| go test ./pkg/... -cover -race -tags deadlock -coverprofile=coverage.txt -covermode=atomic |
| go vet $(REPO)... |
| |
| # Run the tests after building |
| .PHONY: test |
| test: test_js test_go |
| |
| # Build the web interface in a production ready version |
| .PHONY: build-prod |
| build-prod: |
| PUPPETEER_SKIP_CHROMIUM_DOWNLOAD=1 && yarn install && yarn build:prod |
| |
| # Simple clean of generated files only (no local cleanup). |
| .PHONY: clean |
| clean: |
| rm -rf ./dist |
| rm -rf ./coverage |
| rm -rf ./node_modules |
| rm -rf ./bin |
| rm -rf ./out |
| rm -rf ./out-tsc |
| |
| # Build an image based on the production ready version |
| .PHONY: image |
| NODE_VERSION := $(shell cat .nvmrc) |
| image: build_server_prod |
| @echo "Building web UI docker image" |
| DOCKER_BUILDKIT=1 \ |
| docker build -t ${REGISTRY}/yunikorn:web-${DOCKER_ARCH}-${VERSION} . \ |
| --platform "linux/${DOCKER_ARCH}" \ |
| --label "yunikorn-web-revision=${WEB_SHA}" \ |
| --label "Version=${VERSION}" \ |
| --label "BuildTimeStamp=${DATE}" \ |
| --build-arg NODE_VERSION=${NODE_VERSION} \ |
| ${QUIET} |
| |
| # Create output directories |
| .PHONY: init |
| init: |
| mkdir -p ${DEV_BIN_DIR} |
| mkdir -p ${RELEASE_BIN_DIR} |
| |
| .PHONY: build_server_dev |
| build_server_dev: init |
| @echo "building local web server binary" |
| go build -o=${DEV_BIN_DIR}/${SERVER_BINARY} -race -ldflags \ |
| '-X main.version=${VERSION} -X main.date=${DATE}' \ |
| ./pkg/cmd/web/ |
| @chmod +x ${DEV_BIN_DIR}/${SERVER_BINARY} |
| |
| .PHONY: build_server_prod |
| build_server_prod: init |
| @echo "building web server binary" |
| CGO_ENABLED=0 GOOS=linux GOARCH="${EXEC_ARCH}" \ |
| go build -a -o=${RELEASE_BIN_DIR}/${SERVER_BINARY} -ldflags \ |
| '-extldflags "-static" -X main.version=${VERSION} -X main.date=${DATE}' \ |
| -tags netgo -installsuffix netgo \ |
| ./pkg/cmd/web/ |
| |
| # Run the web interface from the production image |
| .PHONY: run |
| run: image |
| docker run -d -p ${PORT}:9889 ${REGISTRY}/yunikorn:web-${DOCKER_ARCH}-${VERSION} |
| |
| # Start the json-server based on the json-db and route. |
| .PHONY: json-server |
| json-server: |
| json-server ./json-db.json |