| #!/usr/local/bin/perl5 |
| |
| push(@INC, "/home/xml4c/bin", "/home/xml4c/bin/perl/perl-RUN/opt/perl5/lib", "/Development2/cupert/bin/perl/perl-RUN/opt/perl5/lib", "/Development/cupert/usr/local/perl/perl-RUN/opt/perl5/lib"); |
| |
| require "getopt.pl"; |
| require 5.0; |
| |
| $|=1; # Force a flush after every print |
| |
| |
| # Extract the source and target directories |
| &Getopt('sopcxmntrb'); |
| $XERCESCROOT = $opt_s; |
| $targetdir = $opt_o; |
| |
| # Check for the environment variables and exit if error |
| if (!length($XERCESCROOT) || !length($targetdir) || (length($opt_h) > 0) ) { |
| print ("Usage is: packageBinaries <options>\n"); |
| print (" where options are:\n"); |
| print (" -s <source_directory>\n"); |
| print (" -o <target_directory>\n"); |
| print (" -c <C compiler name> (e.g. gcc, cc or xlc_r)\n"); |
| print (" -x <C++ compiler name> (e.g. g++, CC, aCC, c++, xlC_r, cl, ecl or ecc)\n"); |
| print (" -m <message loader> can be 'inmem' \(default\), 'icu' or 'iconv'\n"); |
| print (" -n <net accessor> can be 'fileonly' or 'socket' \(default\)\n"); |
| print (" -t <transcoder> can be 'icu' or 'native' \(default\)\n"); |
| print (" -r <thread option> can be 'pthread' \(default\)or 'dce' (only used on HP-11)\n"); |
| print (" -b <bitsToBuild> (accepts '64', '32')\n"); |
| print (" -j suppress building of ICU (speeds up builds when debugging)\n"); |
| print (" -h to get help on these commands\n\n"); |
| print ("Example: Under unix's\n"); |
| print (" perl packageBinaries.pl -s \$HOME/xerces-c-src2_1_0"); |
| print (" -o \$HOME/xerces-c_2_1_0-linux -c gcc -x g++ -m inmem -n fileonly -t native\n\n"); |
| print ("Example: Under Windows\n"); |
| print (" perl packageBinaries.pl -s \\xerces-c-src2_1_0"); |
| print (" -o\\xerces-c_2_1_0-win32 [-n fileonly] [-t icu]\n\n"); |
| print ("Note:\n"); |
| print (" Under Windows, by default the XercesLib project files is\n"); |
| print (" configured to use Win32 resource file based message loader,\n"); |
| print (" WinSocket based net accessor and native Win32 based transcoder.\n"); |
| print (" The two options mentioned in the example above are the only\n"); |
| print (" options relevant under Windows on the command line for this script.\n"); |
| exit(-1); |
| } |
| |
| # Set up the environment variables for ICU |
| # As of Version 3, ICU is not a required component of XERCES-C |
| $ICUROOT = $ENV{'ICUROOT'}; |
| $ICU_DATA = $ENV{'ICU_DATA'}; |
| if (!length($ICUROOT)) { |
| print "You have not defined your ICU install directory.\n"; |
| print "To build with ICU, you must set an environment variable called ICUROOT\n"; |
| print "Proceeding to build XERCES-C without ICU...\n"; |
| } |
| |
| # Check if the source directory exists or not |
| if (!(-e $XERCESCROOT)) { |
| print ("The directory $XERCESCROOT does not exist. Cannot proceed any further.\n"); |
| exit(-1); |
| } |
| |
| # Check if the target directory exists, exit if it does |
| if (-e $targetdir) { |
| print ("Error: The target directory \'$targetdir\' already exists.\n"); |
| print (" You must start with a clean directory to package your product.\n"); |
| exit(1); |
| } |
| |
| # Find out the platform from 'uname -s' |
| open(PLATFORM, "uname -s|"); |
| $platform = <PLATFORM>; |
| chomp($platform); |
| close (PLATFORM); |
| |
| #set platform variable if on windows 64bit |
| my $return_code = system( "ls" ); |
| if ($return_code != 0) |
| { $platform = "win64bit"; |
| } |
| |
| #Fix the backslashes on the Windows platform |
| if ($platform ne "win64bit") |
| { |
| $XERCESCROOT =~ s/\\/\//g; |
| $ICUROOT =~ s/\\/\//g; |
| $targetdir =~ s/\\/\//g; |
| } |
| |
| print "Packaging binaries for \`" . $platform . "\` in " . $targetdir . " ...\n"; # " |
| |
| #Construct the name of the zip file by extracting the last directory name |
| $zipfiles = $targetdir; |
| $zipfiles =~ s/.*\/([\w-\.]*)$/$1/g; |
| $zipfiles = $zipfiles . "/*"; |
| |
| $buildmode = "Release"; # Universally, why do you want to package Debug builds anyway? |
| |
| # |
| # Architecture: Itanium |
| # OS: Windows XP |
| # Compiler: Intel's cl and/or ecl |
| # cygwin: Not Available |
| # |
| if ($platform eq "win64bit" ) |
| { |
| if ($opt_x ne "" && $opt_x ne "cl" && $opt_x ne "ecl") |
| { |
| print("Compiler on Itanium/WindowsXP must be \'cl\' or \'ecl\'\n"); |
| exit(-1); |
| } |
| |
| if ($opt_x eq "") |
| { |
| $opt_x = 'cl'; |
| } |
| |
| $platformname = 'Win64'; # Needed this way by nmake |
| |
| if (-e "$targetdir.zip") { |
| print ("Deleting old target file \'$targetdir.zip\' \n"); |
| unlink("$targetdir.zip"); |
| } |
| |
| # Make the target directory and its main subdirectories |
| psystem ("mkdir $targetdir"); |
| psystem ("mkdir $targetdir\\bin"); |
| psystem ("mkdir $targetdir\\lib"); |
| psystem ("mkdir $targetdir\\etc"); |
| psystem ("mkdir $targetdir\\include"); |
| psystem ("mkdir $targetdir\\include\\xercesc"); |
| psystem ("mkdir $targetdir\\samples"); |
| psystem ("mkdir $targetdir\\samples\\Projects"); |
| psystem ("mkdir $targetdir\\samples\\Projects\\Win32"); |
| psystem ("mkdir $targetdir\\samples\\Projects\\Win32\\VC6"); |
| psystem ("mkdir $targetdir\\samples\\data"); |
| psystem ("mkdir $targetdir\\samples\\SAXCount"); |
| psystem ("mkdir $targetdir\\samples\\SAX2Count"); |
| psystem ("mkdir $targetdir\\samples\\SAXPrint"); |
| psystem ("mkdir $targetdir\\samples\\SAX2Print"); |
| psystem ("mkdir $targetdir\\samples\\DOMCount"); |
| psystem ("mkdir $targetdir\\samples\\DOMPrint"); |
| psystem ("mkdir $targetdir\\samples\\Redirect"); |
| psystem ("mkdir $targetdir\\samples\\MemParse"); |
| psystem ("mkdir $targetdir\\samples\\PParse"); |
| psystem ("mkdir $targetdir\\samples\\StdInParse"); |
| psystem ("mkdir $targetdir\\samples\\EnumVal"); |
| psystem ("mkdir $targetdir\\samples\\SEnumVal"); |
| psystem ("mkdir $targetdir\\samples\\CreateDOMDocument"); |
| psystem ("mkdir $targetdir\\doc"); |
| psystem ("mkdir $targetdir\\doc\\html"); |
| psystem ("mkdir $targetdir\\doc\\html\\apiDocs"); |
| |
| # If 'FileOnly' NetAccessor has been specified, then the project files have to be |
| # changed. |
| #REVISIT: we are make from makefile, not from *.dsp |
| # need to look at it later |
| if ($opt_n =~ m/fileonly/i) { |
| changeWindowsProjectForFileOnlyNA("$XERCESCROOT/Projects/Win32/VC6/xerces-all/XercesLib/XercesLib.dsp"); |
| } |
| |
| # |
| # ICU Build happens here, if one is required. |
| # |
| #REVISIT: icu |
| # |
| if ($opt_t =~ m/icu/i && length($ICUROOT) > 0) { |
| print ("Building ICU from $ICUROOT ...\n"); |
| |
| #Clean up all the dependency files, causes problems for nmake |
| pchdir ("$ICUROOT"); |
| psystem ("del /s /f *.dep *.ncb *.plg *.opt"); |
| |
| # Make the icu dlls |
| pchdir ("$ICUROOT\\source\\allinone\\all"); |
| if (!(length($opt_j) > 0)) { # Optionally suppress ICU build, to speed up overlong builds while debugging. |
| #For XP we ship both release and debug dlls |
| psystem("nmake -f all_win64_release.mak \"CFG=all - $platformname Release\" CPP=$opt_x.exe >buildlog.txt 2>&1"); |
| psystem("type buildlog.txt"); |
| psystem("nmake -f all_win64_debug.mak \"CFG=all - $platformname Debug\" CPP=$opt_x.exe >buildlog.txt 2>&1"); |
| psystem("type buildlog.txt"); |
| } |
| |
| change_windows_makefile_for_ICU("$XERCESCROOT\\Projects\\Win32\\VC6\\xerces-all/XercesLib/XercesLib.mak"); |
| } |
| |
| # Clean up all the dependency files, causes problems for nmake |
| # Also clean up all MSVC-generated project files that just cache the IDE state |
| pchdir ("$XERCESCROOT"); |
| psystem ("del /s /f *.dep *.ncb *.plg *.opt"); |
| |
| # Make all files in the Xerces-C system including libraries, samples and tests |
| pchdir ("$XERCESCROOT\\Projects\\Win32\\VC6\\xerces-all\\all"); |
| psystem( "nmake -f all.mak \"CFG=all - $platformname Release\" CPP=$opt_x.exe >buildlog.txt 2>&1"); |
| system("type buildlog.txt"); |
| |
| pchdir ("$XERCESCROOT\\Projects\\Win32\\VC6\\xerces-all\\XercesLib"); |
| psystem("nmake -f XercesLib.mak \"CFG=XercesLib - $platformname Debug\" CPP=$opt_x.exe > buildlog.txt 2>&1 "); |
| system("type buildlog.txt"); |
| |
| # Decide where you want the build copied from |
| pchdir ($targetdir); |
| $BUILDDIR = $XERCESCROOT . "\\Build\\Win64\\VC6\\" . $buildmode; |
| print "\nBuild is being copied from \'" . $BUILDDIR . "\'"; |
| |
| # Populate the include output directory |
| print ("\n\nCopying headers files ...\n"); |
| |
| @headerDirectories = |
| qw'sax |
| sax2 |
| framework |
| dom |
| dom\\deprecated |
| internal |
| parsers |
| util |
| util\\Compilers |
| util\\MsgLoaders |
| util\\MsgLoaders\\ICU |
| util\\MsgLoaders\\InMemory |
| util\\MsgLoaders\\MsgCatalog |
| util\\MsgLoaders\\Win32 |
| util\\Platforms |
| util\\Platforms\\AIX |
| util\\Platforms\\HPUX |
| util\\Platforms\\Linux |
| util\\Platforms\\MacOS |
| util\\Platforms\\OS2 |
| util\\Platforms\\OS390 |
| util\\Platforms\\PTX |
| util\\Platforms\\Solaris |
| util\\Platforms\\Tandem |
| util\\Platforms\\Win32 |
| util\\regx |
| util\\Transcoders |
| util\\Transcoders\\ICU |
| util\\Transcoders\\Iconv |
| util\\Transcoders\\Win32 |
| validators |
| validators\\common |
| validators\\datatype |
| validators\\DTD |
| validators\\schema |
| validators\\schema\\identity'; |
| |
| foreach $dir (@headerDirectories) { |
| $inclDir = "include\\xercesc\\$dir"; |
| if (! (-e $inclDir)) { |
| psystem("mkdir $inclDir"); |
| } |
| $srcDir = "$XERCESCROOT\\src\\xercesc\\$dir"; |
| |
| # Weed out directories that have no files to copy, to avoid a bunch of |
| # warnings from the cp command in the build output. |
| opendir(dir, $srcDir); |
| @allfiles = readdir(dir); |
| closedir(dir); |
| foreach $fileKind ("hpp", "c") { |
| $matches = grep(/\.$fileKind$/, @allfiles); |
| if ($matches > 0) { |
| psystem("copy /y $srcDir\\*.$fileKind $inclDir\\ "); |
| } |
| } |
| } |
| |
| |
| # |
| # Remove internal implementation headers from the DOM include directory. |
| # |
| psystem("del /s /f $targetdir\\include\\xercesc\\dom\\impl"); |
| psystem("del $targetdir\\include\\xercesc\\dom\\deprecated\\*Impl.hpp"); |
| psystem("del $targetdir\\include\\xercesc\\dom\\deprecated\\DS*.hpp"); |
| |
| if ($opt_t =~ m/icu/i && length($ICUROOT) > 0) { |
| psystem("xcopy /s /y $ICUROOT\\include\\* $targetdir\\include"); |
| } |
| |
| # |
| # Populate the binary output directory |
| # |
| print ("\n \nCopying binary outputs ...\n"); |
| psystem("copy /y $BUILDDIR\\*.dll $targetdir\\bin"); |
| psystem("copy /y $BUILDDIR\\*.exe $targetdir\\bin"); |
| |
| if ($opt_t =~ m/icu/i && length($ICUROOT) > 0) { |
| # Copy the ICU dlls and libs |
| psystem("copy /y $ICUROOT\\bin\\icuuc22.dll $targetdir\\bin"); |
| psystem("copy /y $ICUROOT\\bin\\icuuc22d.dll $targetdir\\bin"); |
| |
| # it seems icudt22*.DLL is generated (upper case dll) |
| # but just case, try lower case .dll as well |
| psystem("copy /y $ICUROOT\\bin\\icudt22*.DLL $targetdir\\bin"); |
| psystem("copy /y $ICUROOT\\bin\\icudt22*.dll $targetdir\\bin"); |
| |
| psystem("copy /y $ICUROOT\\lib\\icudata.lib $targetdir\\lib"); |
| |
| psystem("copy /y $ICUROOT\\lib\\icuuc.lib $targetdir\\lib"); |
| psystem("copy /y $ICUROOT\\lib\\icuucd.lib $targetdir\\lib"); |
| } |
| |
| psystem("copy /y $BUILDDIR\\xerces-c_*.lib $targetdir\\lib"); |
| |
| if ($buildmode ne "Debug") { |
| $DEBUGBUILDDIR = "$XERCESCROOT\\Build\\Win64\\VC6\\Debug"; |
| psystem("copy /y $DEBUGBUILDDIR\\xerces-c_*D.lib $targetdir\\lib"); |
| psystem("copy /y $DEBUGBUILDDIR\\xerces*D.dll $targetdir\\bin"); |
| } |
| |
| |
| # Populate the etc output directory like config.status and the map file |
| print ("\n \nCopying misc output to etc ...\n"); |
| psystem("copy /y $XERCESCROOT\\Build\\Win64\\VC6\\Release\\obj\\*.map $targetdir\\etc"); |
| |
| |
| # Populate the samples directory |
| print ("\n \nCopying sample files ...\n"); |
| psystem("copy $XERCESCROOT\\version.incl $targetdir"); |
| psystem("xcopy /s /y $XERCESCROOT\\samples\\Projects\\Win32\\VC6\\* $targetdir\\samples\\Projects\\Win32\\VC6"); |
| |
| psystem("copy /y $XERCESCROOT\\samples\\SAXCount\\* $targetdir\\samples\\SAXCount"); |
| psystem("del /f $targetdir\\samples\\SAXCount\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\SAX2Count\\* $targetdir\\samples\\SAX2Count"); |
| psystem("del /f $targetdir\\samples\\SAX2Count\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\SAXPrint\\* $targetdir\\samples\\SAXPrint"); |
| psystem("del /f $targetdir\\samples\\SAXPrint\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\SAX2Print\\* $targetdir\\samples\\SAX2Print"); |
| psystem("del /f $targetdir\\samples\\SAX2Print\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\DOMCount\\* $targetdir\\samples\\DOMCount"); |
| psystem("del /f $targetdir\\samples\\DOMCount\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\DOMPrint\\* $targetdir\\samples\\DOMPrint"); |
| psystem("del /f $targetdir\\samples\\DOMPrint\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\Redirect\\* $targetdir\\samples\\Redirect"); |
| psystem("del /f $targetdir\\samples\\Redirect\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\MemParse\\* $targetdir\\samples\\MemParse"); |
| psystem("del /f $targetdir\\samples\\MemParse\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\PParse\\* $targetdir\\samples\\PParse"); |
| psystem("del /f $targetdir\\samples\\PParse\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\StdInParse\\* $targetdir\\samples\\StdInParse"); |
| psystem("del /f $targetdir\\samples\\StdInParse\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\EnumVal\\* $targetdir\\samples\\EnumVal"); |
| psystem("del /f $targetdir\\samples\\EnumVal\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\SEnumVal\\* $targetdir\\samples\\SEnumVal"); |
| psystem("del /f $targetdir\\samples\\SEnumVal\\Makefile.in"); |
| psystem("copy /y $XERCESCROOT\\samples\\CreateDOMDocument\\* $targetdir\\samples\\CreateDOMDocument"); |
| psystem("del /f $targetdir\\samples\\CreateDOMDocument\\Makefile.in"); |
| |
| psystem("copy /y $XERCESCROOT\\samples\\data\\* $targetdir\\samples\\data"); |
| |
| # Populate the docs directory |
| print ("\n \nCopying documentation ...\n"); |
| psystem("xcopy /s /y $XERCESCROOT\\doc\\* $targetdir\\doc"); |
| psystem("copy $XERCESCROOT\\Readme.html $targetdir"); |
| psystem("copy $XERCESCROOT\\credits.txt $targetdir"); |
| psystem("copy $XERCESCROOT\\LICENSE.txt $targetdir"); |
| |
| if (length($ICUROOT) > 0) { |
| psystem("copy $XERCESCROOT\\license.html $targetdir"); |
| psystem("copy $XERCESCROOT\\XLicense.html $targetdir"); |
| } |
| psystem("del /f $targetdir\\doc\\Doxyfile"); |
| psystem("del /s /f $targetdir\\doc\\dtd"); |
| psystem("del /f $targetdir\\doc\\*.xml"); |
| psystem("del /f $targetdir\\doc\\*.ent"); |
| psystem("del /f $targetdir\\doc\\*.gif"); |
| |
| # Now package it all up using ZIP |
| pchdir ("$targetdir\\.."); |
| print ("\n \nZIPping up all files ...\n"); |
| $zipname = $targetdir . ".zip"; |
| psystem ("zip -r $zipname $zipfiles"); |
| } |
| # |
| # End of Itanium Builds. |
| |
| # |
| # WINDOWS builds happen here ... |
| # |
| if ($platform =~ m/Windows/ || $platform =~ m/CYGWIN/) { |
| |
| if ($opt_b eq "64") |
| { |
| $platformname = 'Win64'; |
| } |
| else |
| { |
| $platformname = 'Win32'; |
| } |
| if (-e "$targetdir.zip") { |
| print ("Deleting old target file \'$targetdir.zip\' \n"); |
| unlink("$targetdir.zip"); |
| } |
| |
| # Make the target directory and its main subdirectories |
| psystem ("mkdir $targetdir"); |
| psystem ("mkdir $targetdir/bin"); |
| psystem ("mkdir $targetdir/lib"); |
| psystem ("mkdir $targetdir/etc"); |
| psystem ("mkdir $targetdir/include"); |
| psystem ("mkdir $targetdir/include/xercesc"); |
| psystem ("mkdir $targetdir/samples"); |
| psystem ("mkdir $targetdir/samples/Projects"); |
| psystem ("mkdir $targetdir/samples/Projects/Win32"); |
| psystem ("mkdir $targetdir/samples/Projects/Win32/VC6"); |
| psystem ("mkdir $targetdir/samples/data"); |
| psystem ("mkdir $targetdir/samples/SAXCount"); |
| psystem ("mkdir $targetdir/samples/SAX2Count"); |
| psystem ("mkdir $targetdir/samples/SAXPrint"); |
| psystem ("mkdir $targetdir/samples/SAX2Print"); |
| psystem ("mkdir $targetdir/samples/DOMCount"); |
| psystem ("mkdir $targetdir/samples/DOMPrint"); |
| psystem ("mkdir $targetdir/samples/Redirect"); |
| psystem ("mkdir $targetdir/samples/MemParse"); |
| psystem ("mkdir $targetdir/samples/PParse"); |
| psystem ("mkdir $targetdir/samples/StdInParse"); |
| psystem ("mkdir $targetdir/samples/EnumVal"); |
| psystem ("mkdir $targetdir/samples/SEnumVal"); |
| psystem ("mkdir $targetdir/samples/CreateDOMDocument"); |
| psystem ("mkdir $targetdir/doc"); |
| psystem ("mkdir $targetdir/doc/html"); |
| psystem ("mkdir $targetdir/doc/html/apiDocs"); |
| |
| # If 'FileOnly' NetAccessor has been specified, then the project files have to be |
| # changed. |
| if ($opt_n =~ m/fileonly/i) { |
| changeWindowsProjectForFileOnlyNA("$XERCESCROOT/Projects/Win32/VC6/xerces-all/XercesLib/XercesLib.dsp"); |
| } |
| |
| |
| # |
| # ICU Build happens here, if one is required. |
| # |
| if ($opt_t =~ m/icu/i && length($ICUROOT) > 0) { |
| print ("Building ICU from $ICUROOT ...\n"); |
| |
| #Clean up all the dependency files, causes problems for nmake |
| pchdir ("$ICUROOT"); |
| psystem ("del /s /f *.dep *.ncb *.plg *.opt"); |
| |
| # Make the icu dlls |
| pchdir ("$ICUROOT/source/allinone"); |
| if (!(length($opt_j) > 0)) { # Optionally suppress ICU build, to speed up overlong builds while debugging. |
| #For nt we ship both debug and release dlls |
| if ($platformname eq "Win64") |
| { |
| psystem("msdev allinone.dsw /MAKE \"all - $platformname Release\" /USEENV /REBUILD /OUT buildlog.txt"); |
| } |
| else |
| { |
| psystem("msdev allinone.dsw /MAKE \"all - $platformname Release\" /REBUILD /OUT buildlog.txt"); |
| } |
| psystem("cat buildlog.txt"); |
| if ($platformname eq "Win64") |
| { |
| psystem("msdev allinone.dsw /MAKE \"all - $platformname Debug\" /USEENV /REBUILD /OUT buildlog.txt"); |
| } |
| else |
| { |
| psystem("msdev allinone.dsw /MAKE \"all - $platformname Debug\" /REBUILD /OUT buildlog.txt"); |
| } |
| psystem("cat buildlog.txt"); |
| } |
| |
| change_windows_project_for_ICU("$XERCESCROOT/Projects/Win32/VC6/xerces-all/XercesLib/XercesLib.dsp"); |
| } |
| |
| |
| # Clean up all the dependency files, causes problems for nmake |
| # Also clean up all MSVC-generated project files that just cache the IDE state |
| pchdir ("$XERCESCROOT"); |
| psystem ("del /s /f *.dep *.ncb *.plg *.opt"); |
| |
| # Make all files in the Xerces-C system including libraries, samples and tests |
| pchdir ("$XERCESCROOT/Projects/Win32/VC6/xerces-all"); |
| if ($platformname eq "Win64") |
| { |
| psystem( "msdev xerces-all.dsw /MAKE \"all - $platformname $buildmode\" /USEENV /REBUILD /OUT buildlog.txt"); |
| } |
| else |
| { |
| psystem( "msdev xerces-all.dsw /MAKE \"all - $platformname $buildmode\" /REBUILD /OUT buildlog.txt"); |
| } |
| |
| system("cat buildlog.txt"); |
| |
| # Build the debug xerces dll. Both debug and release DLLs |
| # are in the standard binary distribution of Xerces. |
| if ($buildmode ne "Debug") { |
| if ($platformname eq "Win64") |
| { |
| psystem("msdev xerces-all.dsw /MAKE \"XercesLib - $platformname Debug\" /USEENV /REBUILD /OUT buildlog.txt"); |
| } |
| else |
| { |
| psystem("msdev xerces-all.dsw /MAKE \"XercesLib - $platformname Debug\" /REBUILD /OUT buildlog.txt"); |
| } |
| system("cat buildlog.txt"); |
| } |
| |
| # Decide where you want the build copied from |
| pchdir ($targetdir); |
| $BUILDDIR = $XERCESCROOT . "/Build/Win32/VC6/" . $buildmode; |
| print "\nBuild is being copied from \'" . $BUILDDIR . "\'"; |
| |
| # Populate the include output directory |
| print ("\n\nCopying headers files ...\n"); |
| |
| @headerDirectories = |
| qw'sax |
| sax2 |
| framework |
| dom |
| dom/deprecated |
| internal |
| parsers |
| util |
| util/Compilers |
| util/MsgLoaders |
| util/MsgLoaders/ICU |
| util/MsgLoaders/InMemory |
| util/MsgLoaders/MsgCatalog |
| util/MsgLoaders/Win32 |
| util/Platforms |
| util/Platforms/AIX |
| util/Platforms/HPUX |
| util/Platforms/Linux |
| util/Platforms/MacOS |
| util/Platforms/OS2 |
| util/Platforms/OS390 |
| util/Platforms/PTX |
| util/Platforms/Solaris |
| util/Platforms/Tandem |
| util/Platforms/Win32 |
| util/regx |
| util/Transcoders |
| util/Transcoders/ICU |
| util/Transcoders/Iconv |
| util/Transcoders/Win32 |
| validators |
| validators/common |
| validators/datatype |
| validators/DTD |
| validators/schema |
| validators/schema/identity'; |
| |
| foreach $dir (@headerDirectories) { |
| $inclDir = "include/xercesc/$dir"; |
| if (! (-e $inclDir)) { |
| psystem("mkdir $inclDir"); |
| } |
| $srcDir = "$XERCESCROOT/src/xercesc/$dir"; |
| |
| # Weed out directories that have no files to copy, to avoid a bunch of |
| # warnings from the cp command in the build output. |
| opendir(dir, $srcDir); |
| @allfiles = readdir(dir); |
| closedir(dir); |
| foreach $fileKind ("hpp", "c") { |
| $matches = grep(/\.$fileKind$/, @allfiles); |
| if ($matches > 0) { |
| psystem("cp -f $srcDir/*.$fileKind $inclDir/"); |
| } |
| } |
| } |
| |
| |
| # |
| # Remove internal implementation headers from the DOM include directory. |
| # |
| psystem ("rm -rf $targetdir/include/xercesc/dom/impl"); |
| psystem ("rm $targetdir/include/xercesc/dom/deprecated/*Impl.hpp"); |
| psystem ("rm $targetdir/include/xercesc/dom/deprecated/DS*.hpp"); |
| |
| if ($opt_t =~ m/icu/i && length($ICUROOT) > 0) { |
| psystem("cp -Rfv $ICUROOT/include/* $targetdir/include"); |
| } |
| |
| # |
| # Populate the binary output directory |
| # |
| print ("\n\nCopying binary outputs ...\n"); |
| psystem("cp -fv $BUILDDIR/*.dll $targetdir/bin"); |
| psystem("cp -fv $BUILDDIR/*.exe $targetdir/bin"); |
| |
| if ($opt_t =~ m/icu/i && length($ICUROOT) > 0) { |
| # Copy the ICU dlls and libs |
| psystem("cp -fv $ICUROOT/bin/icuuc22.dll $targetdir/bin"); |
| psystem("cp -fv $ICUROOT/bin/icuuc22d.dll $targetdir/bin"); |
| |
| # it seems icudt22*.DLL is generated (upper case dll) |
| # but just case, try lower case .dll as well |
| psystem("cp -fv $ICUROOT/bin/icudt22*.DLL $targetdir/bin"); |
| psystem("cp -fv $ICUROOT/bin/icudt22*.dll $targetdir/bin"); |
| |
| psystem("cp -fv $ICUROOT/lib/icudata.lib $targetdir/lib"); |
| |
| psystem("cp -fv $ICUROOT/lib/icuuc.lib $targetdir/lib"); |
| psystem("cp -fv $ICUROOT/lib/icuucd.lib $targetdir/lib"); |
| } |
| psystem("cp -fv $BUILDDIR/xerces-c_*.lib $targetdir/lib"); |
| if ($buildmode ne "Debug") { |
| $DEBUGBUILDDIR = "$XERCESCROOT/Build/Win32/VC6/Debug"; |
| psystem("cp -fv $DEBUGBUILDDIR/xerces-c_*D.lib $targetdir/lib"); |
| psystem("cp -fv $DEBUGBUILDDIR/xerces-c*D.dll $targetdir/bin"); |
| } |
| |
| |
| # Populate the etc output directory like config.status and the map file |
| print ("\n\nCopying misc output to etc ...\n"); |
| psystem("cp -fv $XERCESCROOT/Build/Win32/VC6/Release/obj/*.map $targetdir/etc"); |
| |
| |
| # Populate the samples directory |
| print ("\n\nCopying sample files ...\n"); |
| psystem("cp $XERCESCROOT/version.incl $targetdir"); |
| psystem("cp -Rfv $XERCESCROOT/samples/Projects/Win32/VC6/* $targetdir/samples/Projects/Win32/VC6"); |
| |
| psystem("cp -Rfv $XERCESCROOT/samples/SAXCount/* $targetdir/samples/SAXCount"); |
| psystem("rm -f $targetdir/samples/SAXCount/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/SAX2Count/* $targetdir/samples/SAX2Count"); |
| psystem("rm -f $targetdir/samples/SAX2Count/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/SAXPrint/* $targetdir/samples/SAXPrint"); |
| psystem("rm -f $targetdir/samples/SAXPrint/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/SAX2Print/* $targetdir/samples/SAX2Print"); |
| psystem("rm -f $targetdir/samples/SAX2Print/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/DOMCount/* $targetdir/samples/DOMCount"); |
| psystem("rm -f $targetdir/samples/DOMCount/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/DOMPrint/* $targetdir/samples/DOMPrint"); |
| psystem("rm -f $targetdir/samples/DOMPrint/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/Redirect/* $targetdir/samples/Redirect"); |
| psystem("rm -f $targetdir/samples/Redirect/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/MemParse/* $targetdir/samples/MemParse"); |
| psystem("rm -f $targetdir/samples/MemParse/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/PParse/* $targetdir/samples/PParse"); |
| psystem("rm -f $targetdir/samples/PParse/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/StdInParse/* $targetdir/samples/StdInParse"); |
| psystem("rm -f $targetdir/samples/StdInParse/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/EnumVal/* $targetdir/samples/EnumVal"); |
| psystem("rm -f $targetdir/samples/EnumVal/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/SEnumVal/* $targetdir/samples/SEnumVal"); |
| psystem("rm -f $targetdir/samples/SEnumVal/Makefile"); |
| psystem("cp -Rfv $XERCESCROOT/samples/CreateDOMDocument/* $targetdir/samples/CreateDOMDocument"); |
| psystem("rm -f $targetdir/samples/CreateDOMDocument/Makefile"); |
| |
| psystem("cp -Rfv $XERCESCROOT/samples/data/* $targetdir/samples/data"); |
| |
| # Populate the docs directory |
| print ("\n\nCopying documentation ...\n"); |
| psystem("cp -Rfv $XERCESCROOT/doc/* $targetdir/doc"); |
| psystem("cp $XERCESCROOT/Readme.html $targetdir"); |
| psystem("cp $XERCESCROOT/credits.txt $targetdir"); |
| psystem("cp $XERCESCROOT/LICENSE.txt $targetdir"); |
| |
| if (length($ICUROOT) > 0) { |
| psystem("cp $XERCESCROOT/license.html $targetdir"); |
| psystem("cp $XERCESCROOT/XLicense.html $targetdir"); |
| } |
| psystem("rm -f $targetdir/doc/Doxyfile"); |
| psystem("rm -rf $targetdir/doc/style"); |
| psystem("rm -f $targetdir/doc/*.xml"); |
| psystem("rm -f $targetdir/doc/*.ent"); |
| psystem("rm -f $targetdir/doc/*.gif"); |
| |
| # Now package it all up using ZIP |
| pchdir ("$targetdir/.."); |
| print ("\n\nZIPping up all files ...\n"); |
| $zipname = $targetdir . ".zip"; |
| psystem ("zip -r $zipname $zipfiles"); |
| } |
| # |
| # End of Windows Builds. |
| |
| |
| |
| # |
| # UNIX builds happen here ... |
| # |
| if ( ($platform =~ m/AIX/i) || ($platform =~ m/HP-UX/i) || |
| ($platform =~ m/SunOS/i) || ($platform =~ m/Linux/i) || ($platform =~ m/ptx/i) ) { |
| |
| # Echo the current PATH to see what compiler it picks up |
| psystem ("echo PATH=$ENV{'PATH'}"); |
| |
| # Set defaults for platform-independent options. |
| if ($opt_m eq "") {$opt_m = "inmem"; # In memory message loader. |
| } |
| if ($opt_n eq "") {$opt_n = "socket"; # Socket based net accessor. |
| } |
| if ($opt_t eq "") {$opt_t = "native"; # Native transcoding service. |
| } |
| if ($opt_b eq "") {$opt_b = "32"; # bitstobuild. |
| } |
| |
| # Set defaults for platform-specific options. |
| if ($platform =~ m/AIX/i) { |
| $platform = "aix"; |
| if ($opt_c eq "") {$opt_c = "xlc_r"; } |
| if ($opt_x eq "") {$opt_x = "xlC_r"; } |
| |
| $icuCompileFlags = 'CXX="xlC_r" ' . |
| 'CC="xlc_r" ' . |
| 'CFLAGS="-w -O2 -qmaxmem=-1" ' . |
| 'CXXFLAGS="-w -O2 -qmaxmem=-1" '; |
| |
| psystem ("echo LIBPATH=$ENV{'LIBPATH'}"); |
| } |
| if ($platform eq 'HP-UX') { |
| # Find out the operating system version from 'uname -r' |
| open(OSVERSION, "uname -r|"); |
| $osversion = <OSVERSION>; |
| chomp($osversion); |
| close (OSVERSION); |
| $platform = 'hp-11' if ($osversion =~ m/11\./); |
| $platform = 'hp-10' if ($osversion =~ m/10\./); |
| |
| if ($opt_c eq "") {$opt_c = "cc"; } |
| if ($opt_x eq "") { |
| $opt_x = "CC"; |
| if ($platform eq "hp-11") { |
| $opt_x = "aCC"; |
| } |
| } |
| if ($opt_m eq "") { |
| $opt_m = "inmem"; |
| } |
| |
| if ($opt_x eq 'CC') { |
| $icuCompileFlags = 'CC=cc CXX=CC CXXFLAGS="-w +O2 +Ofltacc" CFLAGS="-w +O2 +Ofltacc"'; |
| } else { |
| $icuCompileFlags = 'CC=cc CXX=aCC CXXFLAGS="-w +O2 +Ofltacc" CFLAGS="-w +O2 +Ofltacc"'; |
| } |
| |
| psystem ("echo SHLIB_PATH=$ENV{'SHLIB_PATH'}"); |
| } |
| if ($platform =~ m/Linux/i) { |
| $platform = "linux"; |
| if ($opt_c eq "") {$opt_c = "gcc";} |
| if ($opt_x eq "") {$opt_x = "g++";} |
| if ($opt_x eq "ecc") { |
| #REVISIT: for ecc, disable optimization. |
| $icuCompileFlags = 'CC=ecc CXX=ecc CXXFLAGS="-w -O0" CFLAGS="-w -O0"'; |
| } else { |
| $icuCompileFlags = 'CC=gcc CXX=g++ CXXFLAGS="-w -O" CFLAGS="-w -O"'; |
| } |
| psystem ("echo LD_LIBRARY_PATH=$ENV{'LD_LIBRARY_PATH'}"); |
| } |
| |
| if ($platform =~ m/SunOS/i) { |
| $icuCompileFlags = 'CC=cc CXX=CC CXXFLAGS="-w -O3" CFLAGS="-w -xO3"'; |
| $platform = "solaris"; |
| if ($opt_c eq "") {$opt_c = "cc";} |
| if ($opt_x eq "") {$opt_x = "CC";} |
| psystem ("echo LD_LIBRARY_PATH=$ENV{'LD_LIBRARY_PATH'}"); |
| } |
| |
| if ($platform =~ m/ptx/i) { |
| # Check if the patches have been applied or not |
| $platform = "ptx"; |
| if (!(-d "$XERCESCROOT/src/xercesc/util/Platforms/PTX")) { |
| print ("Error: Could not locate PTX-specific XML4C directory.\n"); |
| print (" The PTX-specific patches must be applied to both XML4C and ICU before a build can succeed.\n"); |
| exit(-1); |
| } |
| # Generally speaking, ICU must be built, before XML4C can be built, for ptx. |
| # If this case causes problems, we can revisit it in the future. Right now, |
| # we fail only if ICUROOT is defined but mh-ptx is not present. |
| if (length($ICUROOT)) { |
| if (!(-e "$ICUROOT/source/config/mh-ptx")) { |
| print ("Error: Could not locate PTX-specific ICU files.\n"); |
| print (" The PTX-specific patches must be applied to both XML4C and ICU before a build can succeed.\n"); |
| exit(-1); |
| } |
| } |
| $icuCompileFlags = 'CC=cc CXX=c++ CXXFLAGS="-w -0" CFLAGS="-w -0"'; |
| # XMLINSTALL is a ptx-port-specific variable used for manipulating where the files are installed. |
| if (!length($ENV{'XMLINSTALL'})) { |
| print ("XMLINSTALL has not been explicitly defined. Setting it to \'$targetdir\'.\n"); |
| $ENV{'XMLINSTALL'} = $targetdir; |
| } |
| $XMLINSTALL = $ENV{'XMLINSTALL'}; |
| } |
| |
| # Check if the target directories already exist or not |
| if (-e $targetdir.".tar") { |
| print ("Error: The target file \'$targetdir.tar\' already exists.\n"); |
| print (" You must delete the file \'$targetdir.tar\' to package your product.\n"); |
| exit(1); |
| } |
| |
| if (-e $srctargetdir.".tar") { |
| print ("Error: The target file \'$srctargetdir.tar\' already exists.\n"); |
| print (" You must delete the file \'$srctargetdir.tar\' to package your product.\n"); |
| exit(1); |
| } |
| |
| |
| # Make the target directory and its main subdirectories |
| psystem ("mkdir $targetdir"); |
| psystem ("mkdir $targetdir/bin"); |
| psystem ("mkdir $targetdir/etc"); |
| psystem ("mkdir $targetdir/lib"); |
| psystem ("mkdir $targetdir/include"); |
| psystem ("mkdir $targetdir/include/xercesc"); |
| if (length($ICUROOT) > 0) { |
| psystem ("mkdir $targetdir/include/unicode"); |
| } |
| psystem ("mkdir $targetdir/include/xercesc/sax"); |
| psystem ("mkdir $targetdir/include/xercesc/sax2"); |
| psystem ("mkdir $targetdir/include/xercesc/framework"); |
| psystem ("mkdir $targetdir/include/xercesc/internal"); |
| psystem ("mkdir $targetdir/include/xercesc/parsers"); |
| psystem ("mkdir $targetdir/include/xercesc/util"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Compilers"); |
| psystem ("mkdir $targetdir/include/xercesc/util/MsgLoaders"); |
| psystem ("mkdir $targetdir/include/xercesc/util/MsgLoaders/ICU"); |
| psystem ("mkdir $targetdir/include/xercesc/util/MsgLoaders/InMemory"); |
| psystem ("mkdir $targetdir/include/xercesc/util/MsgLoaders/MsgCatalog"); |
| psystem ("mkdir $targetdir/include/xercesc/util/MsgLoaders/Win32"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Platforms"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Platforms/AIX"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Platforms/HPUX"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Platforms/Linux"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Platforms/MacOS"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Platforms/OS2"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Platforms/OS390"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Platforms/PTX"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Platforms/Solaris"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Platforms/Tandem"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Platforms/Win32"); |
| psystem ("mkdir $targetdir/include/xercesc/util/regx"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Transcoders"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Transcoders/ICU"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Transcoders/Iconv"); |
| psystem ("mkdir $targetdir/include/xercesc/util/Transcoders/Win32"); |
| psystem ("mkdir $targetdir/include/xercesc/dom"); |
| psystem ("mkdir $targetdir/include/xercesc/dom/impl"); |
| psystem ("mkdir $targetdir/include/xercesc/dom/deprecated"); |
| psystem ("mkdir $targetdir/include/xercesc/validators"); |
| psystem ("mkdir $targetdir/include/xercesc/validators/common"); |
| psystem ("mkdir $targetdir/include/xercesc/validators/datatype"); |
| psystem ("mkdir $targetdir/include/xercesc/validators/DTD"); |
| psystem ("mkdir $targetdir/include/xercesc/validators/schema"); |
| psystem ("mkdir $targetdir/include/xercesc/validators/schema/identity"); |
| psystem ("mkdir $targetdir/samples"); |
| psystem ("mkdir $targetdir/samples/data"); |
| psystem ("mkdir $targetdir/samples/SAXCount"); |
| psystem ("mkdir $targetdir/samples/SAX2Count"); |
| psystem ("mkdir $targetdir/samples/SAXPrint"); |
| psystem ("mkdir $targetdir/samples/SAX2Print"); |
| psystem ("mkdir $targetdir/samples/DOMCount"); |
| psystem ("mkdir $targetdir/samples/DOMPrint"); |
| psystem ("mkdir $targetdir/samples/Redirect"); |
| psystem ("mkdir $targetdir/samples/MemParse"); |
| psystem ("mkdir $targetdir/samples/PParse"); |
| psystem ("mkdir $targetdir/samples/StdInParse"); |
| psystem ("mkdir $targetdir/samples/EnumVal"); |
| psystem ("mkdir $targetdir/samples/SEnumVal"); |
| psystem ("mkdir $targetdir/samples/CreateDOMDocument"); |
| psystem ("mkdir $targetdir/doc"); |
| psystem ("mkdir $targetdir/doc/html"); |
| psystem ("mkdir $targetdir/doc/html/apiDocs"); |
| |
| # Build ICU if needed |
| if ($opt_t =~ m/icu/i && !(length($opt_j) > 0)) |
| { |
| print("\n\nBuild ICU with \'$opt_b\' bit ...\n"); |
| if(length($ICUROOT) == 0) { |
| print("Error, ICUROOT not set, can not build ICU\n"); |
| exit(-1); |
| } |
| |
| # First make the ICU files executable |
| pchdir ("$ICUROOT/source"); |
| psystem ("chmod +x configure config.*"); |
| psystem ("chmod +x install-sh"); |
| $ENV{'ICU_DATA'} = "$ICUROOT/data"; |
| if ($platform =~ m/ptx/i) { |
| psystem ("chmod +x runConfigureICU"); |
| psystem ("runConfigureICU PTX"); |
| } else { |
| # set the 32 bit or 64 bit |
| if ($opt_b eq "32") { |
| psystem ("$icuCompileFlags configure --prefix=$ICUROOT --disable-64bit-libs"); |
| } |
| else { |
| psystem ("$icuCompileFlags configure --prefix=$ICUROOT"); |
| } |
| } |
| psystem ("gmake clean"); # Clean up the build, may want to comment this line out! |
| psystem ("rm -f $ICUROOT/data/*.o"); # gmake clean is not enough |
| psystem ("rm -f $ICUROOT/data/*.c"); # same for .c files |
| psystem ("gmake"); # This will take a long time! |
| psystem ("gmake install"); # Make this separate since this breaks on Solaris |
| |
| # Please check if the following needs any change in Version 1.5 |
| # For the antiquated CC compiler under HPUX, we need to invoke |
| # gmake one extra time to generate the .cnv files. |
| # if ( ($platform =~ m/hp-/i) && ($opt_x eq 'CC') ) { |
| # system ("gmake"); |
| # } |
| } |
| |
| # For ptx, ICUROOT must now be set to XMLINSTALL for further work. |
| if ($platform =~ m/ptx/i) { |
| $ENV{'ICUROOT'} = $ENV{'XMLINSTALL'}; |
| } |
| |
| # make the source files |
| print("\n\nBuild the xerces-c library ...\n"); |
| pchdir ("$XERCESCROOT/src/xercesc"); |
| |
| |
| psystem ("chmod +x run* con* install-sh"); |
| |
| if (length($opt_r) > 0) { |
| psystem ("runConfigure -p$platform -c$opt_c -x$opt_x -m$opt_m -n$opt_n -t$opt_t -r$opt_r -b$opt_b"); |
| } else { |
| psystem ("runConfigure -p$platform -c$opt_c -x$opt_x -m$opt_m -n$opt_n -t$opt_t -b$opt_b"); |
| } |
| |
| psystem ("gmake clean"); # May want to comment this line out to speed up |
| psystem ("gmake"); |
| |
| # Move ICU libs into lib dir, so samples will link. This matches the structure of |
| # the eventual binary packaging, even though we are doing it in the build directory. |
| # |
| if (length($ICUROOT) > 0) { |
| pchdir ("$XERCESCROOT/lib"); |
| |
| # |
| # copy icudata dll |
| # For ICU 2.2: |
| # on AIX, it is called libicudata22.0.so |
| # on Solaris/Linux, it is called libicudata.so.22.0 |
| # on HP, it is called libicudata.s1.22.0 |
| # |
| psystem("rm -f libicudata*"); |
| psystem("cp -f $ICUROOT/lib/libicudata22.0.so ."); |
| psystem("cp -f $ICUROOT/lib/libicudata.so.22.0 ."); |
| psystem("cp -f $ICUROOT/lib/libicudata.sl.22.0 ."); |
| |
| psystem("find . -name 'libicudata22.0.so' -exec ln -s {} libicudata.so \\;"); |
| psystem("find . -name 'libicudata22.0.so' -exec ln -s {} libicudata22.so \\;"); |
| |
| psystem("find . -name 'libicudata.so.22.0' -exec ln -s {} libicudata.so \\;"); |
| psystem("find . -name 'libicudata.so.22.0' -exec ln -s {} libicudata.so.22 \\;"); |
| |
| psystem("find . -name 'libicudata.sl.22.0' -exec ln -s {} libicudata.sl \\;"); |
| psystem("find . -name 'libicudata.sl.22.0' -exec ln -s {} libicudata.sl.22 \\;"); |
| |
| # |
| # copy icuuc dll |
| # on AIX, it is called libicuuc22.0.so |
| # on Solaris/Linux, it is called libicuuc.so.22.0 |
| # on HP, it is called libicuuc.sl.22.0 |
| # |
| psystem("rm -f libicuuc*"); |
| psystem("cp -f $ICUROOT/lib/libicuuc22.0.so ."); |
| psystem("cp -f $ICUROOT/lib/libicuuc.so.22.0 ."); |
| psystem("cp -f $ICUROOT/lib/libicuuc.sl.22.0 ."); |
| |
| psystem("find . -name 'libicuuc22.0.so' -exec ln -s {} libicuuc.so \\;"); |
| psystem("find . -name 'libicuuc22.0.so' -exec ln -s {} libicuuc22.so \\;"); |
| |
| psystem("find . -name 'libicuuc.so.22.0' -exec ln -s {} libicuuc.so \\;"); |
| psystem("find . -name 'libicuuc.so.22.0' -exec ln -s {} libicuuc.so.22 \\;"); |
| |
| psystem("find . -name 'libicuuc.sl.22.0' -exec ln -s {} libicuuc.sl \\;"); |
| psystem("find . -name 'libicuuc.sl.22.0' -exec ln -s {} libicuuc.sl.22 \\;"); |
| } |
| |
| # Now build the samples |
| print("\n\nBuild the samples ...\n"); |
| pchdir ("$XERCESCROOT/samples"); |
| psystem ("chmod +x run* con* install-sh"); |
| psystem ("runConfigure -p$platform -c$opt_c -x$opt_x -b$opt_b"); |
| psystem ("gmake clean"); # May want to comment this line out to speed up |
| psystem ("gmake"); |
| |
| # Next build the tests |
| print("\n\nBuild the tests ...\n"); |
| pchdir ("$XERCESCROOT/tests"); |
| psystem ("chmod +x run* con* install-sh"); |
| psystem ("runConfigure -p$platform -c$opt_c -x$opt_x -b$opt_b"); |
| psystem ("gmake clean"); # May want to comment this line out to speed up |
| psystem ("gmake"); |
| |
| pchdir ($targetdir); |
| |
| # Populate the include output directory |
| print ("\n\nCopying headers files ...\n"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/sax/*.hpp $targetdir/include/xercesc/sax"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/sax2/*.hpp $targetdir/include/xercesc/sax2"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/framework/*.hpp $targetdir/include/xercesc/framework"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/dom/*.hpp $targetdir/include/xercesc/dom"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/dom/deprecated/*.hpp $targetdir/include/xercesc/dom/deprecated"); |
| |
| psystem("cp -Rf $XERCESCROOT/version.incl $targetdir"); |
| |
| psystem("rm -rf $targetdir/include/xercesc/dom/impl"); |
| psystem("rm $targetdir/include/xercesc/dom/deprecated/*Impl.hpp"); |
| psystem("rm $targetdir/include/xercesc/dom/deprecated/DS*.hpp"); |
| |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/internal/*.hpp $targetdir/include/xercesc/internal"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/internal/*.c $targetdir/include/xercesc/internal"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/parsers/*.hpp $targetdir/include/xercesc/parsers"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/parsers/*.c $targetdir/include/xercesc/parsers"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/*.hpp $targetdir/include/xercesc/util"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/*.c $targetdir/include/xercesc/util"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Compilers/*.hpp $targetdir/include/xercesc/util/Compilers"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/MsgLoaders/*.hpp $targetdir/include/xercesc/util/MsgLoaders"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/MsgLoaders/ICU/*.hpp $targetdir/include/xercesc/util/MsgLoaders/ICU"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/MsgLoaders/InMemory/*.hpp $targetdir/include/xercesc/util/MsgLoaders/InMemory"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/MsgLoaders/MsgCatalog/*.hpp $targetdir/include/xercesc/util/MsgLoaders/MsgCatalog"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/MsgLoaders/Win32/*.hpp $targetdir/include/xercesc/util/MsgLoaders/Win32"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Platforms/*.hpp $targetdir/include/xercesc/util/Platforms"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Platforms/AIX/*.hpp $targetdir/include/xercesc/util/Platforms/AIX"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Platforms/HPUX/*.hpp $targetdir/include/xercesc/util/Platforms/HPUX"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Platforms/Linux/*.hpp $targetdir/include/xercesc/util/Platforms/Linux"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Platforms/MacOS/*.hpp $targetdir/include/xercesc/util/Platforms/MacOS"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Platforms/OS2/*.hpp $targetdir/include/xercesc/util/Platforms/OS2"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Platforms/OS390/*.hpp $targetdir/include/xercesc/util/Platforms/OS390"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Platforms/PTX/*.hpp $targetdir/include/xercesc/util/Platforms/PTX"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Platforms/Solaris/*.hpp $targetdir/include/xercesc/util/Platforms/Solaris"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Platforms/Tandem/*.hpp $targetdir/include/xercesc/util/Platforms/Tandem"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Platforms/Win32/*.hpp $targetdir/include/xercesc/util/Platforms/Win32"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/regx/*.hpp $targetdir/include/xercesc/util/regx"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Transcoders/*.hpp $targetdir/include/xercesc/util/Transcoders"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Transcoders/ICU/*.hpp $targetdir/include/xercesc/util/Transcoders/ICU"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Transcoders/Iconv/*.hpp $targetdir/include/xercesc/util/Transcoders/Iconv"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/util/Transcoders/Win32/*.hpp $targetdir/include/xercesc/util/Transcoders/Win32"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/validators/common/*.hpp $targetdir/include/xercesc/validators/common"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/validators/datatype/*.hpp $targetdir/include/xercesc/validators/datatype"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/validators/DTD/*.hpp $targetdir/include/xercesc/validators/DTD"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/validators/schema/*.hpp $targetdir/include/xercesc/validators/schema"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/validators/schema/identity/*.hpp $targetdir/include/xercesc/validators/schema/identity"); |
| |
| if (length($ICUROOT) > 0) { |
| print "\nICU files are being copied from \'$ICUROOT\'"; |
| psystem("cp -Rf $ICUROOT/include/* $targetdir/include"); |
| } |
| |
| # Populate the binary output directory |
| print ("\n\nCopying binary outputs ...\n"); |
| psystem("cp -Rf $XERCESCROOT/bin/* $targetdir/bin"); |
| psystem("rm -rf $targetdir/bin/obj"); |
| |
| # Populate the library output directory |
| print ("\n\nCopying library outputs ...\n"); |
| pchdir ("$targetdir/lib"); |
| psystem("rm -f libxerces-c* "); |
| |
| if ((-e "$XERCESCROOT/lib/libxerces-c.so.21.0" )) { |
| psystem("cp -f $XERCESCROOT/lib/libxerces-c.so.21.0 ."); |
| psystem("ln -s libxerces-c.so.21.0 libxerces-c.so.21 "); |
| psystem("ln -s libxerces-c.so.21 libxerces-c.so "); |
| } |
| |
| if ((-e "$XERCESCROOT/lib/libxerces-c.sl.21.0" )) { |
| psystem("cp -f $XERCESCROOT/lib/libxerces-c.sl.21.0 ."); |
| psystem("ln -s libxerces-c.sl.21.0 libxerces-c.sl.21 "); |
| psystem("ln -s libxerces-c.sl.21 libxerces-c.sl "); |
| } |
| |
| if ((-e "$XERCESCROOT/lib/libxerces-c21.0.so" )) { |
| psystem("cp -f $XERCESCROOT/lib/libxerces-c21.0.so ."); |
| psystem("ln -s libxerces-c21.0.so libxerces-c21.so "); |
| psystem("ln -s libxerces-c21.so libxerces-c.so "); |
| } |
| |
| # |
| # Create symbolic link for those ICU libraries |
| # |
| if (length($ICUROOT) > 0) { |
| pchdir ("$targetdir/lib"); |
| |
| # |
| # copy icudata dll |
| # on AIX, it is called libicudata22.0.so |
| # on Solaris/Linux, it is called libicudata.so.22.0 |
| # on HP, it is called libicudata.s1.22.0 |
| # |
| psystem("rm -f libicudata*"); |
| psystem("cp -f $XERCESCROOT/lib/libicudata22.0.so ."); |
| psystem("cp -f $XERCESCROOT/lib/libicudata.so.22.0 ."); |
| psystem("cp -f $XERCESCROOT/lib/libicudata.sl.22.0 ."); |
| |
| psystem("find . -name 'libicudata22.0.so' -exec ln -s {} libicudata.so \\;"); |
| psystem("find . -name 'libicudata22.0.so' -exec ln -s {} libicudata22.so \\;"); |
| |
| psystem("find . -name 'libicudata.so.22.0' -exec ln -s {} libicudata.so \\;"); |
| psystem("find . -name 'libicudata.so.22.0' -exec ln -s {} libicudata.so.22 \\;"); |
| |
| psystem("find . -name 'libicudata.sl.22.0' -exec ln -s {} libicudata.sl \\;"); |
| psystem("find . -name 'libicudata.sl.22.0' -exec ln -s {} libicudata.sl.22 \\;"); |
| |
| # |
| # copy icuuc dll |
| # on AIX, it is called libicuuc22.0.so |
| # on Solaris/Linux, it is called libicuuc.so.22.0 |
| # on HP, it is called libicuuc.sl.22.0 |
| # |
| psystem("rm -f libicuuc*"); |
| psystem("cp -f $XERCESCROOT/lib/libicuuc22.0.so ."); |
| psystem("cp -f $XERCESCROOT/lib/libicuuc.so.22.0 ."); |
| psystem("cp -f $XERCESCROOT/lib/libicuuc.sl.22.0 ."); |
| |
| psystem("find . -name 'libicuuc22.0.so' -exec ln -s {} libicuuc.so \\;"); |
| psystem("find . -name 'libicuuc22.0.so' -exec ln -s {} libicuuc22.so \\;"); |
| |
| psystem("find . -name 'libicuuc.so.22.0' -exec ln -s {} libicuuc.so \\;"); |
| psystem("find . -name 'libicuuc.so.22.0' -exec ln -s {} libicuuc.so.22 \\;"); |
| |
| psystem("find . -name 'libicuuc.sl.22.0' -exec ln -s {} libicuuc.sl \\;"); |
| psystem("find . -name 'libicuuc.sl.22.0' -exec ln -s {} libicuuc.sl.22 \\;"); |
| |
| } |
| |
| # Populate the etc output directory like config.status and the map file |
| print ("\n\nCopying misc output to etc ...\n"); |
| psystem("cp -Rf $XERCESCROOT/src/xercesc/config.status $targetdir/etc"); |
| psystem("cp -Rf $XERCESCROOT/obj/*.map $targetdir/etc"); |
| |
| # Populate the samples directory |
| print ("\n\nCopying sample files ...\n"); |
| foreach $iii ('config.guess', 'config.h.in', 'config.sub', 'configure', 'configure.in', |
| 'install-sh', 'runConfigure', 'Makefile.in', 'Makefile.incl', 'Makefile') { |
| psystem("cp -f $XERCESCROOT/samples/$iii $targetdir/samples"); |
| } |
| |
| psystem("cp -Rf $XERCESCROOT/samples/data/* $targetdir/samples/data"); |
| psystem("cp -Rf $XERCESCROOT/samples/SAXCount/* $targetdir/samples/SAXCount"); |
| psystem("rm -f $targetdir/samples/SAXCount/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/SAX2Count/* $targetdir/samples/SAX2Count"); |
| psystem("rm -f $targetdir/samples/SAX2Count/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/SAXPrint/* $targetdir/samples/SAXPrint"); |
| psystem("rm -f $targetdir/samples/SAXPrint/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/SAX2Print/* $targetdir/samples/SAX2Print"); |
| psystem("rm -f $targetdir/samples/SAX2Print/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/DOMCount/* $targetdir/samples/DOMCount"); |
| psystem("rm -f $targetdir/samples/DOMCount/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/DOMPrint/* $targetdir/samples/DOMPrint"); |
| psystem("rm -f $targetdir/samples/DOMPrint/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/Redirect/* $targetdir/samples/Redirect"); |
| psystem("rm -f $targetdir/samples/Redirect/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/MemParse/* $targetdir/samples/MemParse"); |
| psystem("rm -f $targetdir/samples/MemParse/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/PParse/* $targetdir/samples/PParse"); |
| psystem("rm -f $targetdir/samples/PParse/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/StdInParse/* $targetdir/samples/StdInParse"); |
| psystem("rm -f $targetdir/samples/StdInParse/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/EnumVal/* $targetdir/samples/EnumVal"); |
| psystem("rm -f $targetdir/samples/EnumVal/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/SEnumVal/* $targetdir/samples/SEnumVal"); |
| psystem("rm -f $targetdir/samples/SEnumVal/Makefile"); |
| psystem("cp -Rf $XERCESCROOT/samples/CreateDOMDocument/* $targetdir/samples/CreateDOMDocument"); |
| psystem("rm -f $targetdir/samples/CreateDOMDocument/Makefile"); |
| psystem("rm -f $targetdir/samples/Makefile"); |
| |
| # Populate the docs directory |
| print ("\n\nCopying documentation ...\n"); |
| psystem("cp -Rf $XERCESCROOT/doc/* $targetdir/doc"); |
| psystem("cp $XERCESCROOT/Readme.html $targetdir"); |
| psystem("cp $XERCESCROOT/credits.txt $targetdir"); |
| psystem("cp $XERCESCROOT/LICENSE.txt $targetdir"); |
| if (length($ICUROOT) > 0) { |
| psystem("cp $XERCESCROOT/license.html $targetdir"); |
| psystem("cp $XERCESCROOT/XLicense.html $targetdir"); |
| } |
| psystem("rm -f $targetdir/doc/Doxyfile"); |
| psystem("rm -rf $targetdir/doc/style"); |
| psystem("rm -f $targetdir/doc/*.xml"); |
| psystem("rm -f $targetdir/doc/*.ent"); |
| psystem("rm -f $targetdir/doc/*.gif"); |
| |
| # Change the directory permissions |
| psystem ("chmod 644 `find $targetdir -type f`"); |
| psystem ("chmod 755 $targetdir/bin/* $targetdir/lib/*"); |
| psystem ("chmod +x $targetdir/samples/runConfigure $targetdir/samples/configure $targetdir/samples/install-sh"); |
| psystem ("chmod +x $targetdir/samples/config.sub $targetdir/samples/config.guess $targetdir/samples/config.status"); |
| psystem ("chmod 755 `find $targetdir -type d`"); |
| |
| # Now package it all up using tar |
| print ("\n\nTARing up all files ...\n"); |
| pchdir ("$targetdir/.."); |
| $zipname = $targetdir . ".tar"; |
| $platformzipname = $zipname; |
| |
| psystem ("tar -cvf $platformzipname $zipfiles"); |
| |
| # Finally compress the files |
| print ("Compressing $platformzipname ...\n"); |
| psystem ("gzip $platformzipname"); |
| } |
| |
| # |
| # psystem subroutine both prints and executes a system command. |
| # |
| sub psystem() { |
| print("$_[0]\n"); |
| system($_[0]); |
| } |
| |
| |
| # |
| # chdir subroutine both prints and executes a chdir |
| # |
| sub pchdir() { |
| print("chdir $_[0]\n"); |
| chdir $_[0]; |
| } |
| |
| |
| sub change_windows_project_for_ICU() { |
| my ($thefile) = @_; |
| print "\nConverting Windows Xerces library project ($thefile) for ICU usage..."; |
| my $thefiledotbak = $thefile . ".bak"; |
| rename ($thefile, $thefiledotbak); |
| |
| open (FIZZLE, $thefiledotbak); |
| open (FIZZLEOUT, ">$thefile"); |
| while ($line = <FIZZLE>) { |
| if ($line =~ /Win32 Debug/) { |
| $icuuc = "icuucd"; |
| } |
| if ($line =~ /Win32 Release/) { |
| $icuuc = "icuuc"; |
| } |
| |
| $line =~ s[/D "PROJ_XMLPARSER"][/I "$ICUROOT\\include" /D "PROJ_XMLPARSER"]; |
| $line =~ s[Debug/xerces-c_2D.lib"][Debug/xerces-c_2D.lib" /libpath:"$ICUROOT\\lib" /libpath:"$ICUROOT\\source\\data"]; |
| $line =~ s[Release/xerces-c_2.lib"][Release/xerces-c_2.lib" /libpath:"$ICUROOT\\lib" /libpath:"$ICUROOT\\source\\data"]; |
| $line =~ s/XML_USE_WIN32_TRANSCODER/XML_USE_ICU_TRANSCODER/g; |
| $line =~ s/user32.lib/user32.lib $icuuc.lib icudata.lib/g; |
| $line =~ s/Transcoders\\Win32\\Win32TransService.cpp/Transcoders\\ICU\\ICUTransService.cpp/g; |
| $line =~ s/Transcoders\\Win32\\Win32TransService.hpp/Transcoders\\ICU\\ICUTransService.hpp/g; |
| |
| print FIZZLEOUT $line; |
| } |
| close (FIZZLEOUT); |
| close (FIZZLE); |
| unlink ($thefiledotbak); |
| } |
| |
| sub change_windows_makefile_for_ICU() { |
| my ($thefile) = @_; |
| print "\nConverting Windows Xerces library makefile ($thefile) for ICU usage..."; |
| my $thefiledotbak = $thefile . ".bak"; |
| rename ($thefile, $thefiledotbak); |
| |
| open (FIZZLE, $thefiledotbak); |
| open (FIZZLEOUT, ">$thefile"); |
| while ($line = <FIZZLE>) { |
| if ($line =~ /Win64 Debug/ ){ |
| $icuuc = "icuucd"; |
| } |
| if ($line =~ /Win64 Release/ ) { |
| $icuuc = "icuuc"; |
| } |
| |
| $line =~ s[/D "PROJ_XMLPARSER"][/I "$ICUROOT\\include" /D "PROJ_XMLPARSER"]; |
| #$line =~ s[/implib:"\$(OUTDIR)\\xerces-c_2.lib"][/implib:"\$(OUTDIR)\\xerces-c_2.lib" /libpath:"$ICUROOT\\lib" /libpath:"$ICUROOT\\source\\data"]; |
| #$line =~ s[/implib:"\$(OUTDIR)\\xerces-c_2D.lib"][/implib:"\$(OUTDIR)\\xerces-c_2D.lib" /libpath:"$ICUROOT\\lib" /libpath:"$ICUROOT\\source\\data"]; |
| $line =~ s[/machine:IA64][/libpath:"$ICUROOT\\lib" /libpath:"$ICUROOT\\source\\data" /machine:IA64]; |
| $line =~ s/XML_USE_WIN32_TRANSCODER/XML_USE_ICU_TRANSCODER/g; |
| $line =~ s/user32.lib/user32.lib $icuuc.lib icudata.lib/g; |
| $line =~ s/Transcoders\\Win32\\Win32TransService/Transcoders\\ICU\\ICUTransService/g; |
| $line =~ s/Win32TransService/ICUTransService/g; |
| |
| print FIZZLEOUT $line; |
| } |
| close (FIZZLEOUT); |
| close (FIZZLE); |
| unlink ($thefiledotbak); |
| } |
| |
| # |
| # This subroutine is used to munge the XercesLib project file to remove all |
| # traces of WinSock based NetAccessor. Once no NetAccessor is specified, the |
| # project file is configured for using the 'FileOnly' NetAccessor. |
| # |
| # For this function to work the assumption is that project file in CMVC is |
| # preconfigured to already use the WinSock based NetAccessor. So, the changes |
| # that need to be done are: |
| # - to remove references to any #defines |
| # - to remove references to wsock32.lib |
| # - to remove references to the source files for the WinSock based NetAccessor. |
| # |
| |
| sub changeWindowsProjectForFileOnlyNA() { |
| my ($thefile) = @_; |
| print "\nConfiguring Xerces library project ($thefile) for FileOnly NetAccessor..."; |
| my $thefiledotbak = $thefile . ".bak"; |
| rename ($thefile, $thefiledotbak); |
| |
| open (PROJFILEIN, $thefiledotbak); |
| open (PROJFILEOUT, ">$thefile"); |
| |
| while ($aline = <PROJFILEIN>) { |
| # By skipping over lines between the NetAccessors group |
| # we can references to the WinSock based NetAccessor files. |
| if ($aline =~ m/^# Begin Group \"NetAccessors\"/g) { |
| # ...found it. Write out the line as a place holder. Also... |
| print PROJFILEOUT $aline; |
| # ...preserve the next two lines. |
| $aline = <PROJFILEIN>; |
| print PROJFILEOUT $aline; |
| $aline = <PROJFILEIN>; |
| print PROJFILEOUT $aline; |
| # Skip over the lines till you hit the WinSock NetAccessor 'End Group'. |
| while ($aline = <PROJFILEIN>) { # read the next line |
| last if ($aline =~ m/^# End Group/g); |
| } |
| # We need to preserve the 'End Group' line. The last statement of the |
| # enclosing while loop prints it out. |
| } |
| |
| # From the remaining lines, remove any references to the #defines and |
| # the WinSock library. |
| $aline =~ s/\/D \"XML_USE_NETACCESSOR_WINSOCK\" //g; # " |
| $aline =~ s/wsock32.lib //g; |
| |
| print PROJFILEOUT $aline; |
| } |
| close (PROJFILEOUT); |
| close (PROJFILEIN); |
| unlink ($thefiledotbak); |
| } |
