Move outdated script to attic.
git-svn-id: https://svn.apache.org/repos/asf/xerces/c/trunk@698588 13f79535-47bb-0310-9956-ffa450edef68
diff --git a/scripts/packageBinaries.pl b/scripts/packageBinaries.pl
deleted file mode 100755
index 224027b..0000000
--- a/scripts/packageBinaries.pl
+++ /dev/null
@@ -1,1421 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements. See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-#
-
-push(@INC, "/home/xml4c/bin", "/home/xml4c/bin/perl/perl-RUN/opt/perl5/lib", "/Development2/cupert/bin/perl/perl-RUN/opt/perl5/lib", "/Development/cupert/usr/local/perl/perl-RUN/opt/perl5/lib");
-
-require "getopt.pl";
-require 5.0;
-
-$|=1; # Force a flush after every print
-
-#
-# Setup global variables
-#
-&Getopt('sopcxmntb');
-my $XERCESCROOT = $opt_s;
-my $targetdir = $opt_o;
-my $ICUROOT = $ENV{'ICUROOT'};
-my $ICUIsPresent = (($opt_t =~ m/icu/i || $opt_m =~ m/icu/i) && length($ICUROOT) > 0);
-my $ICUResourceDir = "$XERCESCROOT/src/xercesc/util/MsgLoaders/ICU/resources";
-
-# Check for the environment variables and exit if error
-if (!length($XERCESCROOT) || !length($targetdir) || (length($opt_h) > 0) ) {
- print ("Usage is: packageBinaries <options>\n");
- print (" where options are:\n");
- print (" -s <source_directory>\n");
- print (" -o <target_directory>\n");
- print (" -c <C compiler name> (e.g. gcc, cc, xlc_r, VC6, VC7.1, VC8, VC9, ecl or icl)\n");
- print (" -x <C++ compiler name> (e.g. g++, CC, aCC, c++, xlC_r, cl, ecl, ecc, icl, VC6, VC7.1, VC8 or VC9)\n");
- print (" -m <message loader> can be 'inmem' \(default\), 'icu' or 'iconv'\n");
- print (" -n <net accessor> can be 'fileonly' or 'socket' \(default\)\n");
- print (" -t <transcoder> can be 'icu' or 'native' \(default\)\n");
- print (" -b <bitsToBuild> (accepts '64', '32')\n");
- print (" -j suppress building of ICU (speeds up builds when debugging)\n");
- print (" -h to get help on these commands\n\n");
- print ("Example: Under unix's\n");
- print (" perl packageBinaries.pl -s \$HOME/xerces-c-src3_0");
- print (" -o \$HOME/xerces-c3_0-linux -c gcc -x g++ -m inmem -n fileonly -t native\n\n");
- print ("Example: Under Windows\n");
- print (" perl packageBinaries.pl -s \\xerces-c-src3_0");
- print (" -o\\xerces-c3_0-win32 [-n fileonly] [-t icu]\n\n");
- print ("Note:\n");
- print (" Under Windows, by default the XercesLib project files is\n");
- print (" configured to use Win32 resource file based message loader,\n");
- print (" WinSocket based net accessor and native Win32 based transcoder.\n");
- print (" The two options mentioned in the example above are the only\n");
- print (" options relevant under Windows on the command line for this script.\n");
- exit(-1);
-}
-
-if (($opt_t =~ m/icu/i || $opt_m =~ m/icu/i) && (length($ICUROOT) == 0)) {
- print "You have specified an ICU build but you have not defined your ICU install directory.\n";
- print "To build with ICU, you must set an environment variable called ICUROOT\n";
- print "Cannot proceed any further.\n";
- exit(-1);
-}
-
-# Check if the source directory exists or not
-if (!(-e $XERCESCROOT)) {
- print ("The directory $XERCESCROOT does not exist. Cannot proceed any further.\n");
- exit(-1);
-}
-
-# Check if the target directory exists, exit if it does
-if (-e $targetdir) {
- print ("Error: The target directory \'$targetdir\' already exists.\n");
- print (" You must start with a clean directory to package your product.\n");
- exit(1);
-}
-
-#
-# Find out the platform from 'uname -s'
-#
-open(PLATFORM, "uname -s|");
-$platform = <PLATFORM>;
-chomp($platform);
-close (PLATFORM);
-
-#Fix the backslashes on the Windows platform
-$XERCESCROOT =~ s/\\/\//g;
-$ICUROOT =~ s/\\/\//g;
-$targetdir =~ s/\\/\//g;
-
-print "Packaging binaries for \`" . $platform . "\` in " . $targetdir . " ...\n"; # "
-
-#Construct the name of the zip file by extracting the last directory name
-$zipfiles = $targetdir;
-$zipfiles =~ s/.*(\/|\\)([\w-\.]*)$/$2/g;
-$zipfiles = $zipfiles . "/*";
-
-#
-# WINDOWS builds happen here, as long as they
-# aren't using gcc...
-#
-# Tasks:
-#
-# Preparation
-# Initialize Vars
-# Make the target directory and its main subdirectories
-# 'FileOnly' NetAccessor
-#
-# Build
-# ICU and/or Resource bundle library for ICUMsgLoader
-# Xerces-C libraries, samples and tests
-#
-# Population
-# include
-# ICU and/or ICUMsgLoader
-# Xerces-C libraries, samples and tests
-# Documentation
-#
-if ($platform =~ m/Windows/ || ($platform =~ m/CYGWIN/ && !($opt_c =~ m/gcc/))) {
-#
-# Preparation Begin
-#
-# Preparation::Initialize Vars
-#
- my $PlatformName = 'Win32';
- my $DevStudioVer = "6.0";
- my $VCBuildDir = "VC6";
- my $Transcoder = 0;
- my $MsgLoader = 0;
-
- my $ReleaseBuildDir = undef;
- my $DebugBuildDir = undef;
- my $ProjectDir = undef;
-
- if ($opt_b eq "64") {
- $PlatformName = 'Win64';
- }
-
- if ($opt_x eq "" || $opt_x =~ m/VC6/i )
- {
- $DevStudioVer = "6.0";
- $VCBuildDir = "VC6";
- $ProjectDir = "$XERCESCROOT/Projects/Win32/$VCBuildDir/xerces-all";
- }
- elsif ($opt_x =~ m/VC7.1/i )
- {
- $DevStudioVer = "7.1";
- $VCBuildDir = "VC7.1";
- $ProjectDir = "$XERCESCROOT/Projects/Win32/$VCBuildDir/xerces-all";
- }
- elsif ($opt_x =~ m/VC8/i )
- {
- $DevStudioVer = "8.0";
- $VCBuildDir = "VC8";
- $ProjectDir = "$XERCESCROOT/Projects/Win32/$VCBuildDir/xerces-all";
- }
- elsif ($opt_x =~ m/VC9/i )
- {
- $DevStudioVer = "9.0";
- $VCBuildDir = "VC9";
- $ProjectDir = "$XERCESCROOT/Projects/Win32/$VCBuildDir/xerces-all";
- }
- elsif ($opt_x =~ m/ecl/i || $opt_x =~ m/icl/i )
- {
- $DevStudioVer = "6.1";
- $VCBuildDir = "VC6";
- $PlatformName = "Win64";
- $ProjectDir = "$XERCESCROOT/Projects/Win32/$VCBuildDir/xerces-all/all";
- }
- else
- {
- print ("Error: Invalid compilers used \n");
- print ("-x <C++ compiler name> VC6, VC7.1, VC8, VC9, ecl and icl \n");
- exit(1);
- }
-
- $ReleaseBuildDir = "$XERCESCROOT/Build/$PlatformName/$VCBuildDir/Release";
- $DebugBuildDir = "$XERCESCROOT/Build/$PlatformName/$VCBuildDir/Debug";
-
- if ($opt_t =~ m/icu/i ) {
- $Transcoder = 1;
- }
-
- if ($opt_m =~ m/icu/i) {
- $MsgLoader = 1;
- }
-
- print "PlatformName =$PlatformName\n";
- print "DevStudioVer =$DevStudioVer\n";
- print "VCBuildDir =$VCBuildDir\n";
- print "ReleaseBuildDir =$ReleaseBuildDir\n";
- print "DebugBuildDir =$DebugBuildDir\n";
- print "ProjectDir =$ProjectDir\n";
- print "Transcoder =$Transcoder\n";
- print "MsgLoader =$MsgLoader\n";
-
- if (-e "$targetdir.zip") {
- print ("Deleting old target file \'$targetdir.zip\' \n");
- unlink("$targetdir.zip");
- }
-
- #
- # Preparation::Make the target directory and its main subdirectories
- #
- createCommonDir();
-
- # windows specifics
- psystem ("mkdir $targetdir/samples/Projects");
- psystem ("mkdir $targetdir/samples/Projects/Win32");
- psystem ("mkdir $targetdir/samples/Projects/Win32/$VCBuildDir");
-
- #
- # Preparation:: 'FileOnly' NetAccessor
- # has been specified, then the project files have to be changed.
- #
- if ($opt_n =~ m/fileonly/i) {
- if ($DevStudioVer eq "6.0") {
- changeWindowsProjectForFileOnlyNA("$XERCESCROOT/Projects/Win32/VC6/xerces-all/XercesLib/XercesLib.dsp");
- } elsif ($DevStudioVer eq "7.1") {
- changeWindowsProjectForFileOnlyNA_VC7_or_VC8("$XERCESCROOT/Projects/Win32/VC7.1/xerces-all/XercesLib/XercesLib.vcproj");
- } elsif ($DevStudioVer eq "8.0") {
- changeWindowsProjectForFileOnlyNA_VC7_or_VC8("$XERCESCROOT/Projects/Win32/VC8/xerces-all/XercesLib/XercesLib.vcproj");
- } elsif ($DevStudioVer eq "9.0") {
- changeWindowsProjectForFileOnlyNA_VC7_or_VC8("$XERCESCROOT/Projects/Win32/VC9/xerces-all/XercesLib/XercesLib.vcproj");
- }
- #else: for now we do not build FO with ecl
- }
-
-#
-# Build Begin
-#
-# Build::ICU and/or Resource bundle library for ICUMsgLoader
-#
- if ($ICUIsPresent) {
-
- # Make the icu dlls
- if (!(length($opt_j) > 0)) {
- #Clean up all the dependency files, causes problems for nmake
- print ("Building ICU from $ICUROOT ...\n");
- pchdir ("$ICUROOT");
- psystem ("del /s /f *.dep *.ncb *.plg *.opt");
-
- # we ship both debug and release dlls
- if ($DevStudioVer eq "6.0") {
- pchdir ("$ICUROOT/source/allinone");
- if ($PlatformName eq "Win64")
- {
- psystem("msdev allinone.dsw /MAKE \"all - $PlatformName Release\" /USEENV /REBUILD /OUT buildlog_release.txt");
- psystem("msdev allinone.dsw /MAKE \"all - $PlatformName Debug\" /USEENV /REBUILD /OUT buildlog_debug.txt");
- }
- else
- {
- psystem("msdev allinone.dsw /MAKE \"all - $PlatformName Release\" /REBUILD /OUT buildlog_release.txt");
- psystem("msdev allinone.dsw /MAKE \"all - $PlatformName Debug\" /REBUILD /OUT buildlog_debug.txt");
- }
- psystem("type buildlog_release.txt");
- psystem("type buildlog_debug.txt");
- } elsif ($DevStudioVer eq "7.1") {
- # ICU only has allinone.sln for VC7.0
- # So the build with ICU on VC7.1 may fail until the VC7.1 version is available
- pchdir ("$ICUROOT/source/allinone");
-
- psystem("devenv.com allinone.sln /rebuild Release /out buildlog_release.txt");
- psystem("type buildlog_release.txt");
-
- psystem("devenv.com allinone.sln /rebuild debug /out buildlog_debug.txt");
- psystem("type buildlog_debug.txt");
- } elsif ($DevStudioVer eq "8.0") {
- # ICU only has allinone.sln for VC7.0
- # So the build with ICU on VC8.0 may fail until the VC8.0 version is available
- pchdir ("$ICUROOT/source/allinone");
-
- psystem("devenv.com allinone.sln /rebuild Release /out buildlog_release.txt");
- psystem("type buildlog_release.txt");
-
- psystem("devenv.com allinone.sln /rebuild debug /out buildlog_debug.txt");
- psystem("type buildlog_debug.txt");
- } elsif ($DevStudioVer eq "9.0") {
- # ICU only has allinone.sln for VC7.0
- # So the build with ICU on VC9.0 may fail until the VC9.0 version is available
- pchdir ("$ICUROOT/source/allinone");
-
- psystem("devenv.com allinone.sln /rebuild Release /out buildlog_release.txt");
- psystem("type buildlog_release.txt");
-
- psystem("devenv.com allinone.sln /rebuild debug /out buildlog_debug.txt");
- psystem("type buildlog_debug.txt");
- } else { #"6.1"
- pchdir ("$ICUROOT/source/allinone/all");
- #ship release dlls only
- psystem("nmake -f all_win64_release.mak \"CFG=all - $PlatformName Release\" CPP=$opt_x.exe >buildlog_release.txt 2>&1");
- psystem("type buildlog_release.txt");
-
- #debug is disabled
- #psystem("nmake -f all_win64_debug.mak \"CFG=all - $PlatformName Debug\" CPP=$opt_x.exe >buildlog_debug.txt 2>&1");
- #psystem("type buildlog_debug.txt");
- }
-
- } #$opt_j
-
- #
- # Build resource bundle library for ICUMsgLoader
- # this can only be built when ICUIsPresent
- if ($opt_m =~ m/icu/i) {
- pchdir ("$ICUResourceDir");
- # clean up intermediate files to make it rebuildable
- psystem ("del /s /f *.DLL *.dll *.res *.DAT *.lib *.obj");
- psystem( "nmake /f resources.mak > buildlog.txt 2>&1 ");
- system("type buildlog.txt");
- # to follow 2 digits convention
- psystem("ren xercesc_messages_3_0.DLL xercesc_messages_3_0.DLL");
- psystem("ren xercesc_messages_3_0.lib xercesc_messages_3_0.lib");
- }
-
- #
- # Adjust project file
- #
- if ($DevStudioVer eq "6.0") {
- change_windows_project_for_ICU("$XERCESCROOT/Projects/Win32/VC6/xerces-all/XercesLib/XercesLib.dsp", $Transcoder , $MsgLoader);
- } elsif ($DevStudioVer eq "7.1") {
- change_windows_project_for_ICU_VC7_or_VC8("$XERCESCROOT/Projects/Win32/VC7.1/xerces-all/XercesLib/XercesLib.vcproj", $Transcoder , $MsgLoader);
- } elsif ($DevStudioVer eq "8.0") {
- change_windows_project_for_ICU_VC7_or_VC8("$XERCESCROOT/Projects/Win32/VC8/xerces-all/XercesLib/XercesLib.vcproj", $Transcoder , $MsgLoader);
- } elsif ($DevStudioVer eq "9.0") {
- change_windows_project_for_ICU_VC7_or_VC8("$XERCESCROOT/Projects/Win32/VC9/xerces-all/XercesLib/XercesLib.vcproj", $Transcoder , $MsgLoader);
- } else { # "6.1"
- change_windows_makefile_for_ICU("$XERCESCROOT/Projects/Win32/VC6/xerces-all/XercesLib/XercesLib.mak", $Transcoder, $MsgLoader);
- }
-
- } #$ICUIsPresent
-
- #
- # Build::Make Xerces-C libraries, samples and tests
- #
-
- # Clean up all the dependency files, causes problems for nmake
- # Also clean up all MSVC-generated project files that just cache the IDE state
- pchdir ("$XERCESCROOT");
- psystem ("del /s /f *.dep *.ncb *.plg *.opt");
-
- #
- # release debug
- # ===========================================================================
- # vc6 vc7.1 ecl vc6 vc7.1 ecl
- # ===========================================================================
- # xercesc yes yes yes yes yes no
- # samples yes yes yes no no no
- # tests yes yes yes no no no
- #
- pchdir ("$ProjectDir");
-
- if ($DevStudioVer eq "6.0") {
- if ($PlatformName eq "Win64") { # /USEENV
- psystem("msdev xerces-all.dsw /MAKE \"all - $PlatformName Release\" /USEENV /REBUILD /OUT buildlog_release.txt");
- psystem("msdev xerces-all.dsw /MAKE \"XercesLib - $PlatformName Debug\" /USEENV /REBUILD /OUT buildlog_debug.txt");
- }
- else {
- psystem("msdev xerces-all.dsw /MAKE \"all - $PlatformName Release\" /REBUILD /OUT buildlog_release.txt");
- psystem("msdev xerces-all.dsw /MAKE \"XercesLib - $PlatformName Debug\" /REBUILD /OUT buildlog_debug.txt");
- }
- } elsif ($DevStudioVer eq "7.1") {
- psystem("devenv /rebuild Release /out buildlog_release.txt /project all xerces-all.sln");
- psystem("devenv /rebuild debug /out buildlog_debug.txt /project XercesLib xerces-all.sln");
- } elsif ($DevStudioVer eq "8.0") {
- psystem("devenv /rebuild Release /out buildlog_release.txt /project all xerces-all.sln");
- psystem("devenv /rebuild debug /out buildlog_debug.txt /project XercesLib xerces-all.sln");
- } else { # "6.1"
- psystem( "nmake -f all.mak \"CFG=all - $PlatformName Release\" CPP=$opt_x.exe >buildlog_release.txt 2>&1");
- }
-
- system("type buildlog_release.txt");
- system("type buildlog_debug.txt");
-
-#
-# Population Begin
-#
-# Population::include
-#
- pchdir ($targetdir);
- print "\nBuild is being copied from \'" . $ReleaseBuildDir . "\'";
-
- populateInclude();
-
-#
-# Population::ICU and/or ICUMsgLoader
-#
- if ($ICUIsPresent) {
-
- print ("\n\nCopying icu outputs ...\n");
- # Copy the ICU dlls and libs
- psystem("cp -fv $ICUROOT/bin/icuuc*.dll $targetdir/bin");
-
- # it seems icudt32*.DLL is generated (upper case dll)
- # but just case, try lower case .dll as well
- psystem("cp -fv $ICUROOT/bin/icudt*.DLL $targetdir/bin");
- psystem("cp -fv $ICUROOT/bin/icudt*.dll $targetdir/bin");
-
- psystem("cp -fv $ICUROOT/lib/icuuc.lib $targetdir/lib");
- psystem("cp -fv $ICUROOT/lib/icuucd.lib $targetdir/lib");
-
- psystem("cp -Rfv $ICUROOT/include/* $targetdir/include");
-
- # Copy the Resouce Bundle for ICUMsgLoader
- if ( $opt_m =~ m/icu/i) {
- pchdir ("$ICUResourceDir");
- psystem("cp -fv xercesc_messages_*.DLL $ReleaseBuildDir");
- psystem("cp -fv xercesc_messages_*.lib $ReleaseBuildDir");
-
- psystem("cp -fv xercesc_messages_*.dat $targetdir/msg");
- psystem("cp -fv xercesc_messages_*.DLL $targetdir/bin");
- psystem("cp -fv xercesc_messages_*.lib $targetdir/lib");
- }
-
- } #ICUIsPresent
-
- #
- # Population::Xerces-c
- #
- print ("\n\nCopying Xerces-c outputs ...\n");
- psystem("cp -fv $ReleaseBuildDir/*.dll $targetdir/bin");
- psystem("cp -fv $ReleaseBuildDir/*.exe $targetdir/bin");
- psystem("cp -fv $ReleaseBuildDir/xerces-c_*.lib $targetdir/lib");
-
- psystem("cp -fv $DebugBuildDir/*.dll $targetdir/bin");
- psystem("cp -fv $DebugBuildDir/xerces-c_*.lib $targetdir/lib");
-
- # Populate the etc output directory like config.status and the map file
- print ("\n\nCopying misc output to etc ...\n");
- psystem("cp -fv $XERCESCROOT/Build/Win32/$VCBuildDir/Release/obj/*.map $targetdir/etc");
-
- # Populate the samples directory
- populateSamples();
-
- # windows specifics: sample projects
- psystem("cp -Rfv $XERCESCROOT/samples/Projects/Win32/$VCBuildDir/* $targetdir/samples/Projects/Win32/$VCBuildDir");
-
- # Populate the scripts and docs directory
- populateMisc();
-
- # Now package it all up using ZIP
- pchdir ("$targetdir/..");
- print ("\n\nZIPping up all files ...\n");
- $zipname = $targetdir . ".zip";
- psystem ("zip -r $zipname $zipfiles");
-}
-#
-# End of Windows Builds.
-
-#
-# UNIX builds happen here ...
-#
-# Tasks:
-#
-# Preparation
-# Initialize Vars
-# Make the target directory and its main subdirectories
-#
-# Build
-# ICU and/or Resource bundle library for ICUMsgLoader
-# Xerces-C libraries, samples and tests
-#
-# Population
-# include
-# ICU and/or ICUMsgLoader
-# Xerces-C libraries, samples and tests
-# Documentation
-#
-if ( ($platform =~ m/AIX/i) ||
- ($platform =~ m/HP-UX/i) ||
- ($platform =~ m/BeOS/i) ||
- ($platform =~ m/SunOS/i) ||
- ($platform =~ m/Linux/i) ||
- ($platform =~ m/ptx/i) ||
- ($platform =~ m/Darwin/i) ||
- ($platform =~ m/CYGWIN/ && ($opt_c =~ m/gcc/))) {
-#
-# Preparation Begin
-#
-# Population::Initialize Vars
-#
-
- # Echo the current PATH to see what compiler it picks up
- psystem ("echo PATH=$ENV{'PATH'}");
-
- $xercesc_cflags = '';
- $xercesc_cxxflags = '';
- $xercesc_linkflags = '';
- $xercesc_64bit_arflags = '"rcu"';
- $xercesc_64bit_cflags = '';
- $xercesc_64bit_cxxflags = '';
- $xercesc_64bit_linkflags = '';
-
- # Set defaults for platform-specific options.
- if ($platform =~ m/AIX/i) {
- $platform = "aix";
- if ($opt_c eq "") {$opt_c = "xlc_r"; }
- if ($opt_x eq "") {$opt_x = "xlC_r"; }
-
- if ($opt_x eq "xlC_rv5compat") {
- $icu_cxxflags = '"-w -O2 -qmaxmem=-1 -qnamemangling=v5"';
- $icu_cflags = '"-w -O2 -qmaxmem=-1 -qnamemangling=v5"';
- } else {
- $icu_cxxflags = '"-w -O2 -qmaxmem=-1"';
- $icu_cflags = '"-w -O2 -qmaxmem=-1"';
- }
-
- if ($opt_b eq "64") {
- $xercesc_64bit_cxxflags = '"-q64 -qwarn64"';
- $xercesc_64bit_cflags = '"-q64 -qwarn64"';
- $xercesc_64bit_arflags = '"-X64 -rcu"';
- }
-
- if ($opt_m =~ m/icu/i) {
- $ENV{'LIBPATH'}="$ICUROOT/lib:$XERCESCROOT/lib:$ENV{'LIBPATH'}";
- $ENV{'PATH'}="$ICUROOT/bin:$ENV{'PATH'}";
- }
- psystem ("echo LIBPATH=$ENV{'LIBPATH'}");
- }
-
- # Mac OS X
- if ($platform =~ m/Darwin/i) {
- $platform = "macosx";
-
- # Set option defaults
- if ($opt_c eq "") {$opt_c = 'cc'; }
- if ($opt_x eq "") {$opt_x = 'g++'; }
- if ($opt_n eq "") {$opt_n = 'native'; } # native net accessor
- if ($opt_t eq "") {$opt_t = 'native'; } # native transcoder
-
- # Code for mac os specific tools
- if ($TAR eq "") {
- $TAR = 'gnutar';
- }
-
- if ($MAKE eq "") {
- $MAKE = 'make';
- }
- } # Mac OS
-
- if ($platform eq 'HP-UX') {
- # Find out the operating system version from 'uname -r'
- open(OSVERSION, "uname -r|");
- $osversion = <OSVERSION>;
- chomp($osversion);
- close (OSVERSION);
- $platform = 'hp-11' if ($osversion =~ m/11\./);
- $platform = 'hp-10' if ($osversion =~ m/10\./);
-
- if ($opt_c eq "") {$opt_c = "cc"; }
- if ($opt_x eq "") {
- $opt_x = "CC";
- if ($platform eq "hp-11") {
- $opt_x = "aCC";
- }
- }
- if ($opt_m eq "") {
- $opt_m = "inmem";
- }
-
- $icu_cxxflags = '"-w +O2 +Ofltacc"';
- $icu_cflags = '"-w +O2 +Ofltacc"';
-
- if (($platform eq "hp-11") &&
- ($opt_x eq "aCC")) {
- $xercesc_cxxflags= '"-D_INCLUDE__STDC_A1_SOURCE"';
- if ($opt_b eq "64") {
- $xercesc_64bit_cxxflags = '"+DD64"';
- $xercesc_64bit_cflags = '"+DD64"';
- $xercesc_64bit_linkflags = '"+DD64"';
- }
- }
-
- if ($opt_m =~ m/icu/i) {
- $ENV{'SHLIB_PATH'}="$ICUROOT/lib:$XERCESCROOT/lib:$ENV{'SHLIB_PATH'}";
- $ENV{'PATH'}="$ICUROOT/bin:$ENV{'PATH'}";
- }
-
- psystem ("echo SHLIB_PATH=$ENV{'SHLIB_PATH'}");
- }# HP-UX
-
- if ($platform =~ m/BeOS/i) {
- $platform = "beos";
- if ($opt_c eq "") {$opt_c = "gcc";}
- if ($opt_x eq "") {$opt_x = "g++";}
- $icu_cxxflags = '"-w -O"';
- $icu_cflags = '"-w -O"';
- psystem ("echo LIBRARY_PATH=$ENV{'LIBRARY_PATH'}");
- }# BeOS
-
- if ($platform =~ m/Linux/i) {
- $platform = "linux";
- if ($opt_c eq "") {$opt_c = "gcc";}
- if ($opt_x eq "") {$opt_x = "g++";}
-
- if ($opt_x eq "icc"){
- $icu_cxxflags = '"-w -O0"';
- $icu_cflags = '"-w -O0"';
- } else {
- $icu_cxxflags = '"-w -O"';
- $icu_cflags = '"-w -O"';
- }
-
- if ($opt_m =~ m/icu/i) {
- $ENV{'LD_LIBRARY_PATH'}="$ICUROOT/lib:$XERCESCROOT/lib:$ENV{'LD_LIBRARY_PATH'}";
- $ENV{'PATH'}="$ICUROOT/bin:$ENV{'PATH'}";
- }
-
- psystem ("echo LD_LIBRARY_PATH=$ENV{'LD_LIBRARY_PATH'}");
- } # Linux
-
- if ($platform =~ m/SunOS/i) {
- $platform = "solaris";
- if ($opt_c eq "") {$opt_c = "cc";}
- if ($opt_x eq "") {$opt_x = "CC";}
-
- if ($opt_m =~ m/icu/i) {
- $ENV{'LD_LIBRARY_PATH'}="$ICUROOT/lib:$XERCESCROOT/lib:$ENV{'LD_LIBRARY_PATH'}";
- $ENV{'PATH'}="$ICUROOT/bin:$ENV{'PATH'}";
- }
-
- if ($opt_b eq "32") {
- $icu_cxxflags = '"-w -O3"';
- $icu_cflags = '"-w -xO3"';
- }
- else {
- # Solaris on AMD 64 doesn't use -xarch=v9
- #$icu_cxxflags = '"-w -O3 -xarch=v9"';
- #$icu_cflags = '"-w -xO3 -xarch=v9"';
- $icu_cxxflags = '"-w -O3"';
- $icu_cflags = '"-w -xO3"';
- }
-
- if ($opt_x eq "CC") {
- $ENV{'PATH'}="/usr/ccs/bin:/usr/ucb:$ENV{'PATH'}";
- $xercesc_linkflags = '"-z muldefs"';
- # Solaris on AMD 64 doesn't use -xarch=v9
- #if ($opt_b eq "64") {
- # $xercesc_64bit_cxxflags = '"-xarch=v9"';
- # $xercesc_64bit_cflags = '"-xarch=v9"';
- # $xercesc_64bit_linkflags = '"-xarch=v9"';
- #}
- }
-
- psystem ("echo LD_LIBRARY_PATH=$ENV{'LD_LIBRARY_PATH'}");
- } # SunOS
-
- if ($platform =~ m/ptx/i) {
- # Check if the patches have been applied or not
- $platform = "ptx";
- if (!(-d "$XERCESCROOT/src/xercesc/util/Platforms/PTX")) {
- print ("Error: Could not locate PTX-specific XML4C directory.\n");
- print (" The PTX-specific patches must be applied to both XML4C and ICU before a build can succeed.\n");
- exit(-1);
- }
- # Generally speaking, ICU must be built, before XML4C can be built, for ptx.
- # If this case causes problems, we can revisit it in the future. Right now,
- # we fail only if ICUROOT is defined but mh-ptx is not present.
- if ($ICUIsPresent) {
- if (!(-e "$ICUROOT/source/config/mh-ptx")) {
- print ("Error: Could not locate PTX-specific ICU files.\n");
- print (" The PTX-specific patches must be applied to both XML4C and ICU before a build can succeed.\n");
- exit(-1);
- }
- }
- $icu_cxxflags = '"-w -0"';
- $icu_cflags = '"-w -0"';
-
- # XMLINSTALL is a ptx-port-specific variable used for manipulating where the files are installed.
- if (!length($ENV{'XMLINSTALL'})) {
- print ("XMLINSTALL has not been explicitly defined. Setting it to \'$targetdir\'.\n");
- $ENV{'XMLINSTALL'} = $targetdir;
- }
- $XMLINSTALL = $ENV{'XMLINSTALL'};
- } #ptx
-
- if(($platform =~ m/CYGWIN/) && ($opt_c =~ m/gcc/)) {
- $MAKE = "make";
- $platform = "CYGWIN";
- }
-
- # Set defaults for platform-independent options.
- if ($opt_m eq "") {$opt_m = "inmem"; } # In memory message loader.
- if ($opt_n eq "") {$opt_n = "socket"; } # Socket based net accessor.
- if ($opt_t eq "") {$opt_t = "native"; } # Native transcoding service.
- if ($opt_b eq "") {$opt_b = "32"; } # bitstobuild.
-
- $icu_bitflag = "";
- if ($opt_b eq "32") {
- $icu_bitflag = "--disable-64bit-libs";
- }
-
- # Set defaults for platform tools
- if ($TAR eq "") {
- $TAR = 'tar';
- }
-
- if ($MAKE eq "") {
- $MAKE = 'gmake';
- }
-
- # Check if the target directories already exist or not
- if (-e $targetdir.".tar") {
- print ("Error: The target file \'$targetdir.tar\' already exists.\n");
- print (" You must delete the file \'$targetdir.tar\' to package your product.\n");
- exit(1);
- }
-
- if (-e $srctargetdir.".tar") {
- print ("Error: The target file \'$srctargetdir.tar\' already exists.\n");
- print (" You must delete the file \'$srctargetdir.tar\' to package your product.\n");
- exit(1);
- }
-
- #
- # Preparation::Make the target directory and its main subdirectories
- #
- createCommonDir();
-
-#
-# Build Begin
-#
-# Build::ICU and/or Resource bundle library for ICUMsgLoader
-#
- if ($ICUIsPresent ) {
-
- # Make the icu dlls
- if (!(length($opt_j) > 0)) {
- print ("Building ICU from $ICUROOT ...\n");
-
- # First make the ICU files executable
- pchdir ("$ICUROOT/source");
- psystem ("chmod +x configure config.*");
- psystem ("chmod +x install-sh");
- $ENV{'ICU_DATA'} = "$ICUROOT/data";
-
- if ($platform =~ m/ptx/i) {
- psystem ("chmod +x runConfigureICU");
- psystem ("sh ./runConfigureICU PTX");
- }
- elsif ($platform eq 'hp-11') {
-
- my $cXX = $opt_x;
- if ($opt_x eq "aCC05") {
- $cXX = "aCC";
- }
- psystem ("CC=$opt_c CXX=$cXX CXXFLAGS=$icu_cxxflags CFLAGS=$icu_cflags sh ./configure --prefix=$ICUROOT $icu_bitflag");
- }elsif ($platform eq 'aix') {
-
- my $cXX = $opt_x;
- if ($opt_x eq "xlC_rv5compat") {
- $cXX = "xlC_r";
- }
- psystem ("CC=$opt_c CXX=$cXX CXXFLAGS=$icu_cxxflags CFLAGS=$icu_cflags sh ./configure --prefix=$ICUROOT $icu_bitflag");
- } else {
- psystem ("CC=$opt_c CXX=$opt_x CXXFLAGS=$icu_cxxflags CFLAGS=$icu_cflags sh ./configure --prefix=$ICUROOT $icu_bitflag");
- }
-
- psystem ("$MAKE clean"); # Clean up the build, may want to comment this line out!
- psystem ("rm -f $ICUROOT/data/*.o"); # make clean is not enough
- psystem ("rm -f $ICUROOT/data/*.c"); # same for .c files
- psystem ("$MAKE"); # This will take a long time!
- psystem ("$MAKE install"); # Make this separate since this breaks on Solaris
-
- } #opt_j
-
- #
- # resource bundle library for ICUMsgLoader is built by Makefile
- # clean up intermediate files to make it rebuildable
- #
- if ($opt_m =~ m/icu/i) {
- pchdir ("$ICUResourceDir");
- psystem ("rm -f *.o *.res *.c *.lst *dll.mak");
- }
-
- } #$ICUIsPresent
-
- # For ptx, ICUROOT must now be set to XMLINSTALL for further work.
- if ($platform =~ m/ptx/i) {
- $ENV{'ICUROOT'} = $ENV{'XMLINSTALL'};
- }
-
- #
- # Build::Make Xerces-C libraries, samples and tests
- #
- print("\n\nBuild the xerces-c library ...\n");
- pchdir ("$XERCESCROOT");
- psystem ("chmod +x configure config/install-sh config/pretty-make config/compile");
-
- $cfg_icu = "";
- $cfg_m = "";
- if ($opt_m eq "inmem") {$cfg_m = "--enable-msgloader-inmemory"; }
- if ($opt_m eq "icu") {$cfg_m = "--enable-msgloader-icu"; $cfg_icu="--with-icu=$ICUROOT"; }
- if ($opt_m eq "iconv") {$cfg_m = "--enable-msgloader-iconv"; }
-
- $cfg_n = "";
- if ($opt_n eq "fileonly") {$cfg_n = "--disable-netaccessor-socket --disable-netaccessor-curl --disable-netaccessor-cfurl"; }
- if ($opt_n eq "socket") {$cfg_n = "--enable-netaccessor-socket"; }
-
- $cfg_t = "";
- if ($opt_t eq "icu") {$cfg_t = "--enable-transcoder-icu"; $cfg_icu="--with-icu=$ICUROOT"; }
- if ($opt_t eq "native") {$cfg_t = "--disable-transcoder-icu --enable-transcoder-iconv"; }
-
- $icu_cflags =~ s/"//g;
- $icu_cxxflags =~ s/"//g;
- $xercesc_cflags =~ s/"//g;
- $xercesc_cxxflags =~ s/"//g;
- $xercesc_64bit_cflags =~ s/"//g;
- $xercesc_64bit_cxxflags =~ s/"//g;
- $xercesc_linkflags =~ s/"//g;
- $xercesc_64bit_linkflags =~ s/"//g;
- $total_cflags = '"' . $icu_cflags . " " . $xercesc_cflags . " " . $xercesc_64bit_cflags . '"';
- $total_cxxflags = '"' . $icu_cxxflags . " " . $xercesc_cxxflags . " " . $xercesc_64bit_cxxflags . '"';
- $total_linkflags = '"' . $xercesc_linkflags . " " . $xercesc_64bit_linkflags . '"';
- psystem ("CC=$opt_c CXX=$opt_x CXXFLAGS=$total_cxxflags CFLAGS=$total_cflags LDFLAGS=$total_linkflags AR_FLAGS=$xercesc_64bit_arflags ./configure $cfg_icu $cfg_m $cfg_n $cfg_t --disable-pretty-make");
-
- psystem ("$MAKE clean"); # May want to comment this line out to speed up
- psystem ("$MAKE");
- #print "\nMAKE finished, config.log is:\n";
- #psystem ("cat config.log");
-
- # build the tests
- print("\n\nBuild the tests ...\n");
- psystem ("$MAKE check");
-
- #
- # Move ICU libs into lib dir, so samples will link. This matches the structure of
- # the eventual binary packaging, even though we are doing it in the build directory.
- #
- if ($ICUIsPresent) {
- copyICUOnUNIX("$XERCESCROOT/lib");
- # src/xercesc/util/MsgLoader/ICU/resources/Makefile has built and
- # copied the message library to $XERCESCROOT/lib, we need copy over here.
- }# $ICUIsPresent
-
- pchdir ($targetdir);
-
-#
-# Population Begin
-#
-# Population::include
-#
- populateInclude();
-
- if ($ICUIsPresent) {
- print "\nICU files are being copied from \'$ICUROOT\'";
- psystem("cp -Rf $ICUROOT/include/* $targetdir/include");
- }
-
-#
-# Population::ICU and/or ICUMsgLoader
-#
-
- #
- # Create symbolic link for those ICU libraries
- #
- if ($ICUIsPresent) {
- # ICU
- copyICUOnUNIX("$targetdir/lib");
- # Copy the Resouce Bundle for ICUMsgLoader
- if ( $opt_m =~ m/icu/i) {
- print ("\n\nCopying ICU message bundles ...\n");
- psystem("cp -f $XERCESCROOT/src/xercesc/util/MsgLoaders/ICU/resources/xercesc_messages_*.dat $targetdir/msg");
- }
-
- }
-
- #
- # Population::Xerces-c
- #
-
- # Populate the library output directory
- print ("\n\nCopying library outputs ...\n");
- pchdir ("$targetdir/lib");
- psystem("rm -f libxerces-c* ");
-
- if ((-e "$XERCESCROOT/src/.libs/libxerces-c-3.0.so" )) {
- psystem("cp -f $XERCESCROOT/src/.libs/libxerces-c-3.0.so .");
- psystem("ln -s libxerces-c-3.0.so libxerces-c-3.so ");
- psystem("ln -s libxerces-c-3.so libxerces-c.so ");
- }
-
- if ((-e "$XERCESCROOT/src/.libs/libxerces-c-3.0.sl" )) {
- psystem("cp -f $XERCESCROOT/src/.libs/libxerces-c-3.0.sl .");
- psystem("ln -s libxerces-c-3.0.sl libxerces-c-3.sl ");
- psystem("ln -s libxerces-c-3.sl libxerces-c.sl ");
- }
-
- if ((-e "$XERCESCROOT/src/.libs/libxerces-c.a" )) {
- psystem("cp -f $XERCESCROOT/src/.libs/libxerces-c.a . ");
- }
-
- # Mac OS X
- if ((-e "$XERCESCROOT/src/.libs/libxerces-c-3.0.dylib" )) {
- psystem("cp -f $XERCESCROOT/src/.libs/libxerces-c-3.0.dylib .");
- psystem("ln -s libxerces-c-3.0.dylib libxerces-c-3.dylib ");
- psystem("ln -s libxerces-c-3.dylib libxerces-c.dylib ");
- }
-
- # Populate the Message Catalog Files
- if ( $opt_m =~ m/iconv/i ) {
- print ("\n\nCopying Message Catalog Files ...\n");
- pchdir ("$targetdir/msg");
- psystem("rm -f XercesMessages* ");
- psystem("cp -f $XERCESCROOT/msg/XercesMessages*.cat .");
- }
-
- # Populate the etc output directory like config.status and the map file
- print ("\n\nCopying misc output to etc ...\n");
- psystem("cp -Rf $XERCESCROOT/config.status $targetdir/etc");
-
- # Populate the samples directory
- populateSamples();
-
- # UNIX specifics
- foreach $iii ('Makefile.in', 'Makefile.am', 'Makefile') {
- psystem("cp -f $XERCESCROOT/samples/$iii $targetdir/samples");
- }
-
- # Populate the scripts and docs directory
- populateMisc();
-
- # Change the directory permissions
- psystem ("find $targetdir -type f -exec chmod 644 {} \\;");
- psystem ("find $targetdir -type d -exec chmod 755 {} \\;");
- psystem ("chmod 755 $targetdir/bin/* $targetdir/lib/*");
-
- # Remove .svn folders
- psystem ("find $targetdir -type d -name .svn -exec rm -rf {} \\;");
-
- # Now package it all up using tar
- print ("\n\nTARing up all files ...\n");
- pchdir ("$targetdir/..");
- $zipname = $targetdir . ".tar";
- $platformzipname = $zipname;
-
- psystem ("$TAR -cvf $platformzipname $zipfiles");
-
- # Finally compress the files
- print ("Compressing $platformzipname ...\n");
- psystem ("gzip $platformzipname");
-} # end of UNIX build
-
-sub createCommonDir() {
-
- print ("\n\nCreating directories ...\n");
-
- psystem ("mkdir $targetdir");
- psystem ("mkdir $targetdir/bin");
- psystem ("mkdir $targetdir/lib");
- psystem ("mkdir $targetdir/msg");
- psystem ("mkdir $targetdir/etc");
-
- psystem ("mkdir $targetdir/include");
- psystem ("mkdir $targetdir/include/xercesc");
-
- psystem ("mkdir $targetdir/samples");
- psystem ("mkdir $targetdir/samples/data");
- psystem ("mkdir $targetdir/samples/SAXCount");
- psystem ("mkdir $targetdir/samples/SAX2Count");
- psystem ("mkdir $targetdir/samples/SAXPrint");
- psystem ("mkdir $targetdir/samples/SAX2Print");
- psystem ("mkdir $targetdir/samples/DOMCount");
- psystem ("mkdir $targetdir/samples/DOMPrint");
- psystem ("mkdir $targetdir/samples/Redirect");
- psystem ("mkdir $targetdir/samples/MemParse");
- psystem ("mkdir $targetdir/samples/PParse");
- psystem ("mkdir $targetdir/samples/StdInParse");
- psystem ("mkdir $targetdir/samples/EnumVal");
- psystem ("mkdir $targetdir/samples/SEnumVal");
- psystem ("mkdir $targetdir/samples/CreateDOMDocument");
- psystem ("mkdir $targetdir/samples/PSVIWriter");
- psystem ("mkdir $targetdir/samples/SCMPrint");
-
- psystem ("mkdir $targetdir/scripts");
-
- psystem ("mkdir $targetdir/doc");
- psystem ("mkdir $targetdir/doc/html");
- psystem ("mkdir $targetdir/doc/html/apiDocs");
-
-}
-
-sub populateInclude() {
-
- print ("\n\nCopying headers files ...\n");
-
- @headerDirectories =
- qw'dom
- framework
- framework/psvi
- internal
- parsers
- sax
- sax2
- util
- util/MsgLoaders
- util/MsgLoaders/ICU
- util/MsgLoaders/InMemory
- util/MsgLoaders/MsgCatalog
- util/MsgLoaders/Win32
- util/FileManagers
- util/MutexManagers
- util/NetAccessors
- util/NetAccessors/Curl
- util/NetAccessors/MacOSURLAccess
- util/NetAccessors/MacOSURLAccessCF
- util/NetAccessors/Socket
- util/NetAccessors/WinSock
- util/regx
- util/Transcoders
- util/Transcoders/ICU
- util/Transcoders/Iconv
- util/Transcoders/Win32
- validators
- validators/common
- validators/datatype
- validators/DTD
- validators/schema
- validators/schema/identity';
-
- foreach $dir (@headerDirectories) {
- $inclDir = "include/xercesc/$dir";
- if (! (-e $inclDir)) {
- psystem("mkdir $inclDir");
- }
- $srcDir = "$XERCESCROOT/src/xercesc/$dir";
-
- # Weed out directories that have no files to copy, to avoid a bunch of
- # warnings from the cp command in the build output.
- opendir(dir, $srcDir);
- @allfiles = readdir(dir);
- closedir(dir);
- foreach $fileKind ("hpp", "c") {
- $matches = grep(/\.$fileKind$/, @allfiles);
- if ($matches > 0) {
- psystem("cp -f $srcDir/*.$fileKind $inclDir/");
- }
- }
- }
-
- psystem("cp -Rf $XERCESCROOT/version.incl $targetdir");
-
- #
- # Remove internal implementation headers from the DOM include directory.
- #
- psystem ("rm -rf $targetdir/include/xercesc/dom/impl");
-}
-
-sub populateSamples() {
-
- print ("\n\nCopying sample files ...\n");
-
- psystem("cp $XERCESCROOT/samples/.libs/* $targetdir/bin");
- psystem("cp $XERCESCROOT/tests/.libs/* $targetdir/bin");
-
- foreach $iii ('SAXCount', 'SAX2Count', 'SAXPrint', 'SAX2Print', 'DOMCount',
- 'DOMPrint', 'Redirect', 'MemParse', 'PParse', 'StdInParse',
- 'EnumVal', 'SEnumVal', 'CreateDOMDocument', 'PSVIWriter', 'SCMPrint')
- {
- psystem("cp -Rf $XERCESCROOT/samples/src/$iii/* $targetdir/samples/$iii");
- psystem("rm -f $targetdir/samples/$iii/*.o");
- }
-
- psystem("cp -Rf $XERCESCROOT/samples/data/* $targetdir/samples/data");
-
-}
-
-sub populateMisc() {
-
- # Populate the scripts directory
- print ("\n\nCopying script files ...\n");
- psystem("cp $XERCESCROOT/scripts/sanityTest* $targetdir/scripts");
-
- # Populate the docs directory
- print ("\n\nCopying documentation ...\n");
- psystem("cp -Rf $XERCESCROOT/doc/* $targetdir/doc");
- psystem("cp $XERCESCROOT/Readme.html $targetdir");
- psystem("cp $XERCESCROOT/credits.txt $targetdir");
- psystem("cp $XERCESCROOT/LICENSE $targetdir");
- psystem("cp $XERCESCROOT/NOTICE $targetdir");
-
- psystem("rm -f $targetdir/doc/Doxyfile");
- psystem("rm -rf $targetdir/doc/style");
- psystem("rm -f $targetdir/doc/*.xml");
- psystem("rm -f $targetdir/doc/*.ent");
- psystem("rm -f $targetdir/doc/*.gif");
-
-}
-
-#
-# copy ICU file to the directory specified
-#
-sub copyICUOnUNIX() {
-
- pchdir ("$_[0]");
-
- #
- # copy icudata dll
- # For ICU 2.6:
- # on AIX, it is called libicudata34.1.a
- # on Solaris/Linux, it is called libicudata.so.34.1
- # on HP, it is called libicudata.sl.34.1
- #
- psystem("rm -f libicudata*");
- psystem("cp -f $ICUROOT/lib/libicudata34.1.so .");
- psystem("cp -f $ICUROOT/lib/libicudata34.1.a .");
- psystem("cp -f $ICUROOT/lib/libicudata.so.34.1 .");
- psystem("cp -f $ICUROOT/lib/libicudata.sl.34.1 .");
-
- psystem("find . -name 'libicudata34.1.so' -exec ln -s {} libicudata.so \\;");
- psystem("find . -name 'libicudata34.1.so' -exec ln -s {} libicudata34.so \\;");
-
- psystem("find . -name 'libicudata34.1.a' -exec ln -s {} libicudata.a \\;");
- psystem("find . -name 'libicudata34.1.a' -exec ln -s {} libicudata34.a \\;");
-
- psystem("find . -name 'libicudata.so.34.1' -exec ln -s {} libicudata.so \\;");
- psystem("find . -name 'libicudata.so.34.1' -exec ln -s {} libicudata.so.34 \\;");
-
- psystem("find . -name 'libicudata.sl.34.1' -exec ln -s {} libicudata.sl \\;");
- psystem("find . -name 'libicudata.sl.34.1' -exec ln -s {} libicudata.sl.34 \\;");
-
- #
- # copy icuuc dll
- # on AIX, it is called libicuuc34.1.a
- # on Solaris/Linux, it is called libicuuc.so.34.1
- # on HP, it is called libicuuc.sl.34.1
- #
- psystem("rm -f libicuuc*");
- psystem("cp -f $ICUROOT/lib/libicuuc34.1.so .");
- psystem("cp -f $ICUROOT/lib/libicuuc34.1.a .");
- psystem("cp -f $ICUROOT/lib/libicuuc.so.34.1 .");
- psystem("cp -f $ICUROOT/lib/libicuuc.sl.34.1 .");
-
- psystem("find . -name 'libicuuc34.1.so' -exec ln -s {} libicuuc.so \\;");
- psystem("find . -name 'libicuuc34.1.so' -exec ln -s {} libicuuc34.so \\;");
-
- psystem("find . -name 'libicuuc34.1.a' -exec ln -s {} libicuuc.a \\;");
- psystem("find . -name 'libicuuc34.1.a' -exec ln -s {} libicuuc34.a \\;");
-
- psystem("find . -name 'libicuuc.so.34.1' -exec ln -s {} libicuuc.so \\;");
- psystem("find . -name 'libicuuc.so.34.1' -exec ln -s {} libicuuc.so.34 \\;");
-
- psystem("find . -name 'libicuuc.sl.34.1' -exec ln -s {} libicuuc.sl \\;");
- psystem("find . -name 'libicuuc.sl.34.1' -exec ln -s {} libicuuc.sl.34 \\;");
-
-}
-
-
-sub change_windows_project_for_ICU() {
- my ($thefile, $Transcoder, $MsgLoader) = @_;
-
- print "\nConverting Windows Xerces library project ($thefile) for ICU usage...";
- my $thefiledotbak = $thefile . ".bak";
- rename ($thefile, $thefiledotbak);
-
- open (FIZZLE, $thefiledotbak);
- open (FIZZLEOUT, ">$thefile");
- while ($line = <FIZZLE>) {
- if ($line =~ /Win32 Debug/) {
- $icuuc = "icuucd";
- }
- if ($line =~ /Win32 Release/) {
- $icuuc = "icuuc";
- }
-
- $line =~ s[/D "XERCES_BUILDING_LIBRARY"][/I "$ICUROOT\\include" /D "XERCES_BUILDING_LIBRARY"];
- $line =~ s[Debug/xerces-c_3D.lib"][Debug/xerces-c_3D.lib" /libpath:"$ICUROOT\\lib" /libpath:"$ICUROOT\\source\\data" /libpath:"$XERCESCROOT\\src\\xercesc\\util\\MsgLoaders\\ICU\\resources"];
- $line =~ s[Release/xerces-c_3.lib"][Release/xerces-c_3.lib" /libpath:"$ICUROOT\\lib" /libpath:"$ICUROOT\\source\\data" /libpath:"$XERCESCROOT\\src\\xercesc\\util\\MsgLoaders\\ICU\\resources"];
-
- if ($MsgLoader)
- {
- $line =~ s/user32.lib/user32.lib $icuuc.lib xercesc_messages_3_0.lib/g;
- }
- elsif ($Transcoder)
- {
- $line =~ s/user32.lib/user32.lib $icuuc.lib/g;
- }
-
- if ($Transcoder)
- {
- $line =~ s/XERCES_USE_TRANSCODER_WINDOWS/XERCES_USE_TRANSCODER_ICU/g;
- $line =~ s/Transcoders\\Win32\\Win32TransService.cpp/Transcoders\\ICU\\ICUTransService.cpp/g;
- $line =~ s/Transcoders\\Win32\\Win32TransService.hpp/Transcoders\\ICU\\ICUTransService.hpp/g;
- }
-
- if ($MsgLoader)
- {
- $line =~ s/XERCES_USE_WIN32_MSGLOADER/XERCES_USE_MSGLOADER_ICU/g;
- $line =~ s/MsgLoaders\\Win32\\Win32MsgLoader.cpp/MsgLoaders\\ICU\\ICUMsgLoader.cpp/g;
- $line =~ s/MsgLoaders\\Win32\\Win32MsgLoader.hpp/MsgLoaders\\ICU\\ICUMsgLoader.hpp/g;
- }
-
- print FIZZLEOUT $line;
- }
- close (FIZZLEOUT);
- close (FIZZLE);
- unlink ($thefiledotbak);
-}
-
-sub change_windows_makefile_for_ICU() {
- my ($thefile, $Transcoder, $MsgLoader) = @_;
- print "\nConverting Windows Xerces library makefile ($thefile) for ICU usage...";
- my $thefiledotbak = $thefile . ".bak";
- rename ($thefile, $thefiledotbak);
-
- open (FIZZLE, $thefiledotbak);
- open (FIZZLEOUT, ">$thefile");
- while ($line = <FIZZLE>) {
- if ($line =~ /Win64 Debug/ ){
- $icuuc = "icuucd";
- }
- if ($line =~ /Win64 Release/ ) {
- $icuuc = "icuuc";
- }
-
- $line =~ s[/D "XERCES_BUILDING_LIBRARY"][/I "$ICUROOT\\include" /D "XERCES_BUILDING_LIBRARY"];
- $line =~ s[/machine:IA64][/libpath:"$ICUROOT\\lib" /libpath:"$ICUROOT\\source\\data" /libpath:"$XERCESCROOT\\src\\xercesc\\util\\MsgLoaders\\ICU\\resources" /machine:IA64];
-
- if ($MsgLoader)
- {
- $line =~ s/user32.lib/user32.lib $icuuc.lib xercesc_messages_3_0.lib/g;
- }
- elsif ($Transcoder)
- {
- $line =~ s/user32.lib/user32.lib $icuuc.lib/g;
- }
-
- if ($Transcoder) {
- $line =~ s/XERCES_USE_TRANSCODER_WINDOWS/XERCES_USE_TRANSCODER_ICU/g;
- $line =~ s/Transcoders\\Win32\\Win32TransService/Transcoders\\ICU\\ICUTransService/g;
- $line =~ s/Win32TransService/ICUTransService/g;
- }
-
- if ($MsgLoader)
- {
- $line =~ s/XERCES_USE_WIN32_MSGLOADER/XERCES_USE_MSGLOADER_ICU/g;
- $line =~ s/MsgLoaders\\Win32\\Win32MsgLoader/MsgLoaders\\ICU\\ICUMsgLoader/g;
- $line =~ s/Win32MsgLoader/ICUMsgLoader/g;
- }
-
- print FIZZLEOUT $line;
- }
- close (FIZZLEOUT);
- close (FIZZLE);
- unlink ($thefiledotbak);
-}
-
-sub change_windows_project_for_ICU_VC7_or_VC8() {
- my ($thefile, $Transcoder, $MsgLoader) = @_;
- print "\nConverting Windows Xerces library project ($thefile) for ICU usage...";
- my $thefiledotbak = $thefile . ".bak";
- rename ($thefile, $thefiledotbak);
-
- open (FIZZLE, $thefiledotbak);
- open (FIZZLEOUT, ">$thefile");
- while ($line = <FIZZLE>) {
- if ($line =~ /Release\|Win32/) {
- $icuuc = "icuuc";
- }
- if ($line =~ /Debug\|Win32/) {
- $icuuc = "icuucd";
- }
- $line =~ s/AdditionalIncludeDirectories=\"([^"]*)/AdditionalIncludeDirectories=\"$ICUROOT\\include;$1/;
- $line =~ s/AdditionalLibraryDirectories=\"([^"]*)/AdditionalLibraryDirectories=\"$ICUROOT\\lib;$ICUROOT\\source\\data;$XERCESCROOT\\src\\xercesc\\util\\MsgLoaders\\ICU\\resources;$1/;
-
- if ($MsgLoader)
- {
- $line =~ s/AdditionalDependencies=\"([^"]*)/AdditionalDependencies=\"$icuuc.lib xercesc_messages_3_0.lib $1/;
- }
- elsif ($Transcoder)
- {
- $line =~ s/AdditionalDependencies=\"([^"]*)/AdditionalDependencies=\"$icuuc.lib $1/;
- }
-
- if ($Transcoder) {
- $line =~ s/XERCES_USE_TRANSCODER_WINDOWS/XERCES_USE_TRANSCODER_ICU/g;
- $line =~ s/Transcoders\\Win32\\Win32TransService.cpp/Transcoders\\ICU\\ICUTransService.cpp/g;
- $line =~ s/Transcoders\\Win32\\Win32TransService.hpp/Transcoders\\ICU\\ICUTransService.hpp/g;
- }
-
- if ($MsgLoader)
- {
- $line =~ s/XERCES_USE_WIN32_MSGLOADER/XERCES_USE_MSGLOADER_ICU/g;
- $line =~ s/MsgLoaders\\Win32\\Win32MsgLoader/MsgLoaders\\ICU\\ICUMsgLoader/g;
- $line =~ s/Win32MsgLoader/ICUMsgLoader/g;
- }
-
- print FIZZLEOUT $line;
- }
- close (FIZZLEOUT);
- close (FIZZLE);
- unlink ($thefiledotbak);
-}
-
-#
-# This subroutine is used to munge the XercesLib project file to remove all
-# traces of WinSock based NetAccessor. Once no NetAccessor is specified, the
-# project file is configured for using the 'FileOnly' NetAccessor.
-#
-# For this function to work the assumption is that project file in CMVC is
-# preconfigured to already use the WinSock based NetAccessor. So, the changes
-# that need to be done are:
-# - to remove references to any #defines
-# - to remove references to wsock32.lib
-# - to remove references to the source files for the WinSock based NetAccessor.
-#
-
-sub changeWindowsProjectForFileOnlyNA() {
- my ($thefile) = @_;
- print "\nConfiguring Xerces library project ($thefile) for FileOnly NetAccessor...";
- my $thefiledotbak = $thefile . ".bak";
- rename ($thefile, $thefiledotbak);
-
- open (PROJFILEIN, $thefiledotbak);
- open (PROJFILEOUT, ">$thefile");
-
- while ($aline = <PROJFILEIN>) {
- # By skipping over lines between the NetAccessors group
- # we can references to the WinSock based NetAccessor files.
- if ($aline =~ m/^# Begin Group \"NetAccessors\"/g) {
- # ...found it. Write out the line as a place holder. Also...
- print PROJFILEOUT $aline;
- # ...preserve the next two lines.
- $aline = <PROJFILEIN>;
- print PROJFILEOUT $aline;
- $aline = <PROJFILEIN>;
- print PROJFILEOUT $aline;
- # Skip over the lines till you hit the WinSock NetAccessor 'End Group'.
- while ($aline = <PROJFILEIN>) { # read the next line
- last if ($aline =~ m/^# End Group/g);
- }
- # We need to preserve the 'End Group' line. The last statement of the
- # enclosing while loop prints it out.
- }
-
- # From the remaining lines, remove any references to the #defines and
- # the WinSock library.
- $aline =~ s/\/D \"XERCES_USE_NETACCESSOR_WINSOCK\" //g; # "
- if ($aline =~ /( )+ws2_32.lib( )*\"/) { # end of line
- $aline =~ s/( )+ws2_32.lib( )*\"/\"/g;
- } else { # beginning or middle of line
- $aline =~ s/ws2_32.lib( )*//g;
- }
-
- print PROJFILEOUT $aline;
- }
- close (PROJFILEOUT);
- close (PROJFILEIN);
- unlink ($thefiledotbak);
-}
-
-sub changeWindowsProjectForFileOnlyNA_VC7_or_VC8() {
- my ($thefile) = @_;
- print "\nConfiguring Xerces library project ($thefile) for FileOnly NetAccessor...\n";
- my $thefiledotbak = $thefile . ".bak";
- rename ($thefile, $thefiledotbak);
-
- open (PROJFILEIN, $thefiledotbak);
- open (PROJFILEOUT, ">$thefile");
-
- while ($aline = <PROJFILEIN>) {
- # By skipping over lines between the NetAccessors group
- # we can references to the WinSock based NetAccessor files.
- if ($aline =~ m/^# Begin Group \"NetAccessors\"/g) {
- # ...found it. Write out the line as a place holder. Also...
- print PROJFILEOUT $aline;
- # ...preserve the next two lines.
- $aline = <PROJFILEIN>;
- print PROJFILEOUT $aline;
- $aline = <PROJFILEIN>;
- print PROJFILEOUT $aline;
- # Skip over the lines till you hit the WinSock NetAccessor 'End Group'.
- while ($aline = <PROJFILEIN>) { # read the next line
- last if ($aline =~ m/^# End Group/g);
- }
- # We need to preserve the 'End Group' line. The last statement of the
- # enclosing while loop prints it out.
- }
-
- # From the remaining lines, remove any references to the #defines and
- # the WinSock library.
- if ($aline =~ /\;XERCES_USE_NETACCESSOR_WINSOCK/) { # end or middle of line
- $aline =~ s/\;XERCES_USE_NETACCESSOR_WINSOCK//g;
- } else { # beginning of line
- $aline =~ s/\XERCES_USE_NETACCESSOR_WINSOCK\;*//g;
- }
-
- if ($aline =~ /\s+ws2_32\.lib\s*\"/) { # end of line
- $aline =~ s/\s+ws2_32\.lib\s*\"/\"/g;
- } else { # beginning or middle of line
- $aline =~ s/ws2_32\.lib\s*//g;
- }
-
- print PROJFILEOUT $aline;
- }
- close (PROJFILEOUT);
- close (PROJFILEIN);
- unlink ($thefiledotbak);
-}
-
-#
-# psystem subroutine both prints and executes a system command.
-#
-sub psystem() {
- print("$_[0]\n");
- system($_[0]);
- }
-
-#
-# chdir subroutine both prints and executes a chdir
-#
-sub pchdir() {
- print("chdir $_[0]\n");
- chdir $_[0];
- }
