creating initial 2.5.1 install page
git-svn-id: https://svn.apache.org/repos/asf/vcl/site/trunk@1860785 13f79535-47bb-0310-9956-ffa450edef68
diff --git a/content/docs/VCL251InstallGuide.mdtext b/content/docs/VCL251InstallGuide.mdtext
new file mode 100644
index 0000000..fde7c19
--- /dev/null
+++ b/content/docs/VCL251InstallGuide.mdtext
@@ -0,0 +1,740 @@
+Title: VCL 2.5 Installation Guide
+Notice: Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+ .
+ http://www.apache.org/licenses/LICENSE-2.0
+ .
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+# Scripted Installation
+VCL 2.5 is the first release to include an installation script. All you need to install
+VCL is the script. It will download and validate the VCL software and then install it.
+The script can be used to install all three parts of VCL (database, web portal, and
+management node) or to install each part individually.
+
+[Download Install Script (vcl-install.sh)][4]
+
+Validate script:
+
+ :::BashLexer
+ wget https://www.apache.org/dist/vcl/2.5/vcl-install.sh.sha1
+ sha1sum -c vcl-install.sh.sha1
+ wget https://www.apache.org/dist/vcl/KEYS
+ gpg --import KEYS
+ wget https://www.apache.org/dist/vcl/2.5/vcl-install.sh.asc
+ gpg --verify vcl-install.sh.asc
+
+Running the installation script with no arguments will step you through installing all
+three parts of VCL. Alternatively, the following explains optional arguments. If
+installing the management node part of VCL, it will also prompt you to agree to the
+installation of various system level requirements needed for the code to run.
+<pre><code>
+
+ vcl-install.sh [-h|--help] [-d|--database] [-w|--web] [-m|--managementnode]
+ [--dbhost <hostname> --dbpass <password>]
+ [--mnhost <hostname>] [--webhost <hostname>]
+
+ -d|--database - install database server components
+ --dbpass, --mnhost, --mnip, --webhost, and --adminpass must also be specified
+
+ -w|--web - install web server components
+ --dbhost and --dbpass must also be specified
+
+ -m|--managementnode - install management node (vcld) components
+ --dbhost, --dbpass, and --adminpass must also be specified
+
+ --dbhost <hostname> - hostname of database server (default=localhost)
+
+ --dbpass <password> - password VCL will use for accessing
+ database (default=random)
+
+ --mnhost <hostname> - hostname of management node (default=localhost)
+
+ --webhost <hostname> - hostname of web server (default=localhost)
+
+ --adminpass <password> - password for VCL admin user
+</code></pre>
+
+# Manual Installation
+
+This section provides a list of commands for installing VCL if you prefer to manually
+install it.
+
+[Database Installation](#database)<br>
+[Web Portal Installation](#web)<br>
+[Management Node Installation](#managementnode)
+
+## Install and Configure Database {#database}
+
+VCL currently supports the use of MySQL or MariaDB as the database.
+
+1. Download and Extract the Apache VCL Source
+ * If you have not already done so, follow the instructions on the [download](/downloads/download.cgi)
+page to download and verify apache-VCL-2.5.tar.bz2, and put it in /root
+
+ * Extract the files:
+
+ :::BashLexer
+ tar -jxvf apache-VCL-2.5.tar.bz2
+
+2. Install MySQL Server or MariaDB Server
+
+ * Install MySQL or MariaDB Server
+
+ :::BashLexer
+ yum install mysql-server -y
+
+ or
+
+ :::BashLexer
+ yum install mariadb-server -y
+
+ * Configure the database daemon to start automatically:
+
+ :::BashLexer
+ /sbin/chkconfig --level 345 mysqld on
+
+ or
+
+ :::BashLexer
+ /sbin/chkconfig --level 345 mariadb on
+
+
+ * Start the database daemon:
+
+ :::BashLexer
+ /sbin/service mysqld start
+
+ or
+
+ :::BashLexer
+ /sbin/service mariadb start
+
+ * If the iptables firewall is being used and the web server and management nodes
+will be on different machines, port 3306 should be opened up to each of those nodes.
+Add the following to your iptables config and restart iptables service.<br>
+**Note:** Insert your web server and management node IP address in the right locations.
+
+ :::BashLexer
+ vi /etc/sysconfig/iptables
+
+ * Add these rules:
+
+ :::BashLexer
+ -A INPUT -m state --state NEW -s <web server IP> -p tcp --dport 3306 -j ACCEPT
+ -A INPUT -m state --state NEW -s <management node IP> -p tcp --dport 3306 -j ACCEPT
+
+ * Restart iptables:
+
+ :::BashLexer
+ service iptables restart
+
+ * If the firewalld firewall is being used and the web server and management nodes
+will be on different machines, port 3306 should be opened up to each of those nodes.
+Add the following rules and reload the rule set.<br>
+**Note:** Insert your web server and management node IP address in the right locations.
+
+ * Add these rules:
+
+ :::BashLexer
+ firewall-cmd --zone=public --permanent --add-rich-rule="rule family="ipv4" source address="<web server IP>" service name="mysql" accept"
+ firewall-cmd --zone=public --permanent --add-rich-rule="rule family="ipv4" source address="<management node IP>" service name="mysql" accept"
+
+ * Restart iptables:
+
+ :::BashLexer
+ firewall-cmd --reload
+
+3. Create the VCL Database
+
+ * Run the MySQL command-line client:
+
+ :::BashLexer
+ mysql
+
+ * Create a database:
+
+ :::MySqlLexer
+ CREATE DATABASE vcl;
+
+ * Create a user with SELECT, INSERT, UPDATE, DELETE, and CREATE TEMPORARY TABLES
+privileges on the database you just created (**NOTE Use your own password**):
+
+ :::MySqlLexer
+ GRANT SELECT,INSERT,UPDATE,DELETE,CREATE TEMPORARY TABLES ON vcl.* TO 'vcluser'@'localhost' IDENTIFIED BY 'vcluserpassword';
+
+ * Exit the MySQL command-line client
+
+ :::MySqlLexer
+ exit
+
+ * Import the vcl.sql file into the database. The **vcl.sql** file is included in the
+**mysql** directory within the Apache VCL source code
+
+ :::BashLexer
+ mysql vcl < apache-VCL-2.5/mysql/vcl.sql
+
+
+----------
+
+## Install and Configure the Web Components {#web}
+
+**Prerequisites**
+
+ - Apache VCL 2.5 has been downloaded
+ - VCL database has been installed and configured
+
+**Web Server:**
+
+ - Apache HTTP Server v1.3 or v2.x with SSL enabled
+ - PHP 5.0 or later
+
+**Required Linux Packages:**
+
+ - httpd - Apache HTTP Server
+ - mod_ssl - SSL/TLS module for the Apache HTTP server
+ - php - The PHP HTML-embedded scripting language
+
+**Required PHP Modules:**
+
+ * php
+ * php-gettext
+ * php-json (required if your PHP version is 5.2 or later)
+ * php-ldap (if you will be using LDAP authentication)
+ * php-mysql
+ * php-openssl
+ * php-xml
+ * php-xmlrpc
+
+
+ - - -
+
+1. **Install the Required Linux Packages & PHP Modules**
+
+ * If your web server is running a Red Hat-based OS, the required components can be installed with:
+
+ For RHEL / CentOS 6 and 7
+
+ :::BashLexer
+ yum install httpd mod_ssl php php-mysql php-xml php-xmlrpc php-ldap -y
+
+ * Configure the web server daemon (httpd) to start automatically:
+
+ :::BashLexer
+ /sbin/chkconfig --level 345 httpd on
+
+ * Start the web server daemon
+
+ :::BashLexer
+ /sbin/service httpd start
+
+ * If SELinux is enabled, run the following command to allow the web server to connect to the database:
+
+ :::BashLexer
+ /usr/sbin/setsebool -P httpd_can_network_connect=1
+
+ * If the iptables firewall is being used, port 80 and 443 should be opened up in the iptables
+config file:
+
+ :::BashLexer
+ vi /etc/sysconfig/iptables
+
+ * Add these rules:
+
+ :::BashLexer
+ -A INPUT -m state --state NEW -p tcp --dport 80 -j ACCEPT
+ -A INPUT -m state --state NEW -p tcp --dport 443 -j ACCEPT
+
+ * Restart iptables
+
+ :::BashLexer
+ service iptables restart
+
+ * If the firewalld firewall is being used, port 80 and 443 should be opened up:
+
+ * Add these rules:
+
+ :::BashLexer
+ firewall-cmd --zone=public --add-service=http --permanent
+ firewall-cmd --zone=public --add-service=https --permanent
+
+ * Reload firewalld rules
+
+ :::BashLexer
+ firewall-cmd --reload
+
+
+2. **Install the VCL Frontend Web Code**
+ * If you have not already done so, follow the instructions on the [download](/downloads/download.cgi)
+page to download and verify apache-VCL-2.5.tar.bz2, and put it in /root
+
+ * Extract the files:
+
+ :::BashLexer
+ tar -jxvf apache-VCL-2.5.tar.bz2
+
+ * Copy the **web** directory to a location under the web root of your web server and
+navigate to the destination **.ht-inc** subdirectory:
+
+ :::BashLexer
+ cp -ar apache-VCL-2.5/web/ /var/www/html/vcl-2.5
+ ln -s /var/www/html/vcl-2.5 /var/www/html/vcl
+ cd /var/www/html/vcl/.ht-inc
+
+ * If SELinux is enabled, run the following command to set the context of the web code to httpd_sys_content_t
+
+ :::BashLexer
+ chcon -R -t httpd_sys_content_t /var/www/html/vcl-2.5
+
+ * Copy secrets-default.php to secrets.php:
+
+ :::BashLexer
+ cp secrets-default.php secrets.php
+
+ * Edit the secrets.php file:
+
+ :::BashLexer
+ vi secrets.php
+
+ * Set the following variables to match your database configuration:
+ * $vclhost
+ * $vcldb
+ * $vclusername
+ * $vclpassword
+ * Create random passwords for the following variables:
+ * $cryptkey (generate with "openssl rand 32 | base64")
+ * $pemkey
+ * Save the secrets.php file
+
+ * Run the genkeys.sh
+
+ :::BashLexer
+ ./genkeys.sh
+
+ * Copy conf-default.php to conf.php:
+
+ :::BashLexer
+ cp conf-default.php conf.php
+
+ * Modify conf.php to match your site
+
+ :::BashLexer
+ vi conf.php
+
+ * Review every entry under "Things in this section must be modified/reviewed".
+ Descriptions and pointers for each value are included within conf.php.
+
+ * Set the owner of the .ht-inc/maintenance and .ht-inc/cryptkey directories to the web server user (normally 'apache'):
+
+ :::BashLexer
+ chown apache maintenance
+ chown apache cryptkey
+
+ * If SELinux is enabled, run the following command to allow the web server to write to maintenance and cryptkey
+
+ :::BashLexer
+ chcon -t httpd_sys_rw_content_t maintenance
+ chcon -t httpd_sys_rw_content_t cryptkey
+
+ * Open the testsetup.php page in a web browser:
+ * If you set up your site to be https://my.server.org/vcl/ open https://my.server.org/vcl/testsetup.php
+ * Debug any issues reported by testsetup.php
+
+3. **Log In to the VCL Website**
+ * Open the index.php page in your browser (https://my.server.org/vcl/index.php)
+ * Select Local Account
+ * Username: admin
+ * Password: adminVc1passw0rd
+
+ * Set the admin user password (**DO NOT skip this step**):
+ * Click User Preferences
+ * Enter the current password: adminVc1passw0rd
+ * Enter a new password
+ * Click Submit Changes
+
+4. **Add a Management Node to the Database**
+ * Click the Management Nodes link
+ * Select Edit Management Node Profiles
+ * Click Submit
+ * Click Add New Management Node
+ * Fill in these required fields:
+ * Hostname - The name of the management node server. This value doesn't
+necessarily need to be a name registered in DNS nor does it need to be the value
+displayed by the Linux hostname command. For example, if you are installing all of the
+VCL components on the same machine you can set this value to localhost.
+ * IP address - the public IP address of the management node
+ * SysAdmin Email Address - error emails will be sent to this address
+ * Install Path - this is the parent directory under which image files will be
+stored - only required if doing bare metal installs or using VMWare with local disks
+ * End Node SSH Identity Key Files - enter /etc/vcl/vcl.key unless you know
+you are using a different SSH identity key file
+ * Optionally, fill in these fields:
+ * Address for Shadow Emails - End users are sent various emails about the
+status of their reservations. If this field is configured, copies of all of those emails
+will be sent to this address.
+ * Public NIC configuration method - this defaults to Dynamic DHCP - if DHCP
+is not available for the public interface of your nodes, you can set this to Static.
+Then, the IP configuration on the nodes will be manually set using Public Netmask,
+Public Gateway, Public DNS Server, and the IP address set for the computer under Manage
+Computers
+ * Click Add Management Node
+ * A dialog will pop up informing you to add the management node to a group,
+read it and click Close
+ * select the allManagementNodes group on the right
+ * click <-Add
+ * click Close
+
+5. **Install & Configure phpMyAdmin (Optional):**
+[phpMyAdmin][1] is a free and optional tool which allows [MySQL][2] to be administered
+using a web browser. It makes administering the VCL database easier. This tool can be
+installed on the VCL web server.
+To install phpMyAdmin, follow the instructions on: [phpMyAdmin Installation &
+Configuration][3]
+
+---------
+
+
+## Install & Configure the Management Node Components {#managementnode}
+
+**Prerequisites**
+The following management node installation instructions assume the instructions in these
+previous sections have been completed:
+
+* VCL 2.5 Database Installation
+* VCL 2.5 Web Code Installation
+
+**Supported Operating Systems:**
+
+The VCL management node daemon (vcld) has been developed to run on an operating system
+based on Red Hat Enterprise Linux (RHEL). It has been tested on the following:
+
+* Red Hat Enterprise Linux 6.x
+* Red Hat Enterprise Linux 7.x
+* CentOS 6.x
+* CentOS 7.x
+
+**Required Linux Packages:**
+
+The VCL management node daemon (vcld) requires the following Linux packages and Perl
+modules in order to run (see step 2 below for installation instructions).
+
+* expat-devel - Libraries and include files to develop XML applications with expat
+* gcc - Various compilers (C, C++, Objective-C, Java, ...)
+* krb5-devel - Development files needed to compile Kerberos 5 programs
+* krb5-libs - The shared libraries used by Kerberos 5
+* libxml2-devel - Libraries, includes, etc. to develop XML and HTML applications
+* make - GNU make utility to maintain groups of programs
+* mysql/mariadb - Includes libraries for connecting to mysql/mariadb
+* nmap - Network exploration tool and security scanner
+* openssh - The OpenSSH implementation of SSH protocol versions 1 and 2
+* openssl-devel - Files for development of applications which will use OpenSSL
+* perl - The Perl programming language
+* xmlsec1-openssl - OpenSSL crypto plugin for XML Security Library
+
+**Required Perl Modules:**
+
+The VCL management node daemon (vcld) is written in Perl and has been tested on Perl
+5.10 and 5.16. The following Perl modules available from CPAN are also required (see step 2
+below for installation instructions):
+
+* Crypt::CBC - implementation of the cryptographic cipher block chaining mode
+* Crypt::OpenSSL::RSA - RSA encoding and decoding, using the openSSL libraries
+* Crypt::Rijndael - Crypt::CBC compliant Rijndael encryption module
+* DBI - Generic Database Interface
+* Digest::SHA1 - NIST SHA message digest algorithm
+* Exception::Class::Base - base class for exception objects
+* Frontier::Client - issue Frontier XML RPC requests to a server
+* HTTP::Headers - class encapsulating HTTP Message headers
+* IO::String - emulate file interface for in-core strings
+* JSON - JavaScript Object Notation
+* LWP::UserAgent - class implementing a web user agent
+* Mail::Mailer - Simple mail agent interface
+* Net::Jabber - Jabber perl library
+* Net::Netmask - parse, manipulate and lookup IP network blocks
+* Net::SSH::Expect - a wrapper to the ssh executable that is available in system's PATH
+* Object::InsideOut - Comprehensive inside-out object support
+* RPC::XML::Client - XML-RPC client class
+* Text::CSV_XS - comma-separated values manipulation routines
+* XML::Simple - API for simple XML files
+* YAML - YAML Ain't Markup Language
+<BR>
+---
+
+1. **Install the VCL Management Node Code - Perl Daemon**
+ * If you have not already done so, follow the instructions on the
+[download](/downloads/download.cgi) page to download and verify
+apache-VCL-2.5.tar.bz2, and put it in /root
+
+ * Extract the files:
+
+ :::BashLexer
+ tar -jxvf apache-VCL-2.5.tar.bz2
+
+ * Copy the managementnode directory to the location where you want it to reside
+(typically /usr/local):
+
+ :::BashLexer
+ cp -ar apache-VCL-2.5/managementnode /usr/local/vcl-2.5
+ ln -s /usr/local/vcl-2.5 /usr/local/vcl
+
+2. **Install the Required Linux Packages & Perl Modules**
+
+ * Run the install_perl_libs.pl script located in the bin directory:
+
+ :::BashLexer
+ perl /usr/local/vcl/bin/install_perl_libs.pl
+
+ The last line of the install_perl_libs.pl script output should be:
+
+ *COMPLETE: installed all components*
+
+ Note: The script will hang or terminate if it encounters a problem. If this occurs,
+you will need to troubleshoot the problem by looking at the output.
+
+ The install_perl_libs.pl script included in the VCL distribution will attempt to
+download and install the required Linux packages and Perl modules. It uses the yum
+utility to install the required Linux packages. The required Perl modules are available
+from CPAN - The Comprehensive Perl Archive Network. The install_perl_libs.pl script
+attempts to download and install the required Perl modules by using the CPAN.pm module
+which is included with most Perl distributions.
+
+ The yum utility should exist on any modern Red Hat-based Linux distribution (Red
+Hat, CentOS, Fedora, etc). If yum isn't available on your management node OS, you will
+need to download and install the required Linux packages manually or by using another
+package management utility. After installing the required Linux packages, attempt to
+run the install_perl_libs.pl script again.
+
+3. **Configure vcld.conf**
+
+ * Create the /etc/vcl directory:
+
+ :::BashLexer
+ mkdir /etc/vcl
+
+ * Copy the stock vcld.conf file to /etc/vcl:
+
+ :::BashLexer
+ cp /usr/local/vcl/etc/vcl/vcld.conf /etc/vcl
+
+ * Edit /etc/vcl/vcld.conf:
+
+ :::BashLexer
+ vi /etc/vcl/vcld.conf
+
+ The following lines must be configured in order to start the VCL daemon (vcld)
+and allow it to check in to the database:
+
+ * FQDN - the fully qualified name of the management node, this should match the
+name that was configured for the management node in the database
+ * server - the IP address or FQDN of the database server
+ * LockerWrtUser - database user account with write privileges
+ * wrtPass - database user password
+ * xmlrpc_pass - password for xmlrpc api from vcld to the web interface(can be
+long). This will be used later to sync the database vclsystem user account
+ * xmlrpc_url - URL for xmlrpc api
+https://my.server.org/vcl/index.php?mode=xmlrpccall
+
+ * Save the vcld.conf file
+
+4. **Configure the SSH Client**
+
+ The SSH client on the management node should be configured to prevent SSH processes
+spawned by the root user to the computers it controls from hanging because of missing or
+different entries in the known_hosts file.
+
+ * Edit the ssh_config file:
+
+ :::BashLexer
+ vi /etc/ssh/ssh_config
+
+ * Set the following parameters:
+ * UserKnownHostsFile /dev/null
+ * StrictHostKeyChecking no
+
+ Note: If you do not want these settings applied universally on the management node
+the SSH configuration can also be configured to only apply these settings to certain
+hosts or only for the root user. Consult the SSH documentation for more information.
+
+5. **Install and Start the VCL Daemon (vcld) Service**
+
+ * **Steps for systemd** - use these steps if your system is using systemd
+
+ * Copy the vcld service script to /usr/lib/systemd/system
+
+ :::BashLexer
+ cp /usr/local/vcl/etc/systemd/system/vcld.service /usr/lib/systemd/system
+
+ * Create a vcld config file in /etc/sysconfig
+
+ :::BashLexer
+ echo "OPTIONS='-v -conf=/etc/vcl/vcld.conf'" > /etc/sysconfig/vcld
+
+ * If using SELinux, set the correct user and context:
+
+ :::BashLexer
+ chcon -u system_u -t systemd_unit_file_t /usr/lib/systemd/system/vcld.service
+
+ * Enable vcld.service
+
+ :::BashLexer
+ systemctl enable vcld.service
+
+ * Start the vcld service:
+
+ :::BashLexer
+ systemctl start vcld.service
+
+ * Check the vcld service by monitoring the vcld.log file:
+
+ :::BashLexer
+ tail -f /var/log/vcld.log
+
+ * **Steps for SystemV** - use these steps if your system is using SystemV (scripts located in
+/etc/init.d)
+
+ * Copy the vcld service script to /etc/init.d and name it vcld:
+
+ :::BashLexer
+ cp /usr/local/vcl/bin/S99vcld.linux /etc/init.d/vcld
+
+ * Add the vcld service using chkconfig:
+
+ :::BashLexer
+ /sbin/chkconfig --add vcld
+
+ * Configure the vcld service to automatically run at runtime levels 3-5:
+
+ :::BashLexer
+ /sbin/chkconfig --level 345 vcld on
+
+ * Start the vcld service:
+
+ :::BashLexer
+ /sbin/service vcld start
+
+ * Check the vcld service by monitoring the vcld.log file:
+
+ :::BashLexer
+ tail -f /var/log/vcld.log
+
+ You should see the following being added to the log file every few seconds if the
+management node is checking in with the database:
+
+ :::BashLexer
+ 2017-07-13 13:23:45|25494|vcld:main(167)|lastcheckin time updated for management node 1: 2017-07-13 13:23:45
+
+
+6. **Set the vclsystem account password for xmlrpc api**
+
+ Using the vcld -setup tool, set the vclsystem account. This is needed to properly
+use the block allocation features.
+
+ :::BashLexer
+ /usr/local/vcl/bin/vcld --setup
+
+ Select the options listed below to set the password. When prompted paste or type the
+password from xmlrpc_pass variable in the vcld.conf file and hit enter.
+
+ :::BashLexer
+ Select 5. Set Local VCL User Account Password
+ Select 2. vclsystem
+ Enter the password you set for xmlrpc_pass in /etc/vcl/vcld.conf
+
+ After setting the password for the vclsystem user, test that RPC-XML Access works correctly
+by selecting
+
+ :::BashLexer
+ 2: Test RPC-XML Access
+
+ **SUCCESS: RPC-XML access is configured correctly** should be displayed followed by a long list of
+available XMLRPC functions
+
+7. **Install & Configure the DHCP Service**
+
+ DHCP service is needed for the private network to provide address to provisioned
+machines.
+
+ * Install dhcp if it is not already installed:
+
+ :::BashLexer
+ yum install dhcp -y
+
+ * Configure the dhcpd service to automatically start at runlevels 3-5:
+
+ :::BashLexer
+ /sbin/chkconfig dhcpd on
+
+ * Configure the dhcpd.conf file.
+
+ :::BashLexer
+ vi /etc/dhcpd.conf
+ -or-
+ vi /etc/dhcp/dhcpd.conf
+
+ Configure your dhcpd.conf file according to your network configuration.
+ The contents of the dhcpd.conf file will vary based on how your network is
+configured. Below is an example of a basic dhcpd.conf file:
+
+ :::BashLexer
+ ddns-update-style none;
+ shared-network eth0 {
+ subnet 10.100.0.0 netmask 255.255.255.0 {
+ ignore unknown-clients;
+ }
+ }
+
+ You will add host definitions to the dhcpd.conf file after you add computers to VCL
+using the website. The website allows you to select a set of computers for which to
+generate dhcpd.conf information, which can be copied and pasted into the dhcpd.conf file.
+
+
+ * Start the dhcpd service:
+
+ :::BashLexer
+ /sbin/service dhcpd start
+
+---------
+
+# Initial Administration Steps After Installing VCL
+
+After you have installed the VCL components, you need to do some initial administration
+of your new VCL install.
+
+1. Add Computers
+
+ * If using **bare-metal** provisioning, follow the instruction
+on the [Adding Computers](addcomputers) page, selecting **Bare Metal**
+as the computer Type
+ * If using **VM** provisioning:
+ * Follow the instruction on the [Adding Computers](addcomputers)
+page, selecting **Bare Metal** as the computer Type to add at least one
+VM Host
+ * Follow the instruction on the [Adding Computers](addcomputers)
+page, selecting **Virtual Machine** as the computer Type to add some
+virtual computers
+ * Finally, [Assign the VMs to VM hosts](assignvmtohost)
+
+2. [Create Base Images](image-creation)
+
+3. Configure Authorization (follow links appropriate to your site)
+ * [Adding Local Accounts](localaccounts)
+ * [Configuring LDAP Authentication](ldapauth)
+ * [Configuring Shibboleth Authentication](shibauth)
+
+------
+
+
+ [1]: http://www.phpmyadmin.net/
+ [2]: http://www.mysql.com/
+ [3]: installphpmyadmin
+ [4]: https://www.apache.org/dist/vcl/2.5/vcl-install.sh
\ No newline at end of file
