| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| |
| # Install a complete distribution, the required system tools and libraries, the |
| # runtime dependencies and the Tuscany SCA runtime on a fresh Ubuntu Server |
| # 10.10 system. |
| |
| # Display commands as they are executed |
| set -x |
| |
| # Build and install in the current directory |
| build=`pwd` |
| |
| # Install core dev tools |
| sudo apt-get -y install wget git-core subversion autoconf pkg-config automake libtool g++ make |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| |
| # Build Libexpat |
| wget http://sourceforge.net/projects/expat/files/expat/2.0.1/expat-2.0.1.tar.gz/download |
| mv download expat-2.0.1.tar.gz |
| tar xzf expat-2.0.1.tar.gz |
| cd expat-2.0.1 |
| ./configure --prefix=$build/expat-2.0.1-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Apache APR and HTTP server |
| sudo apt-get -y install libssl-dev libpcre3-dev |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| svn co -r 1051230 http://svn.apache.org/repos/asf/apr/apr/trunk apr-1.4.x |
| cd apr-1.4.x |
| ./buildconf |
| ./configure -with-openssl --with-crypto --with-expat=$build/expat-2.0.1-bin --prefix=$build/apr-1.4.x-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| wget http://archive.apache.org/dist/httpd/httpd-2.3.10-alpha.tar.gz |
| tar xzf httpd-2.3.10-alpha.tar.gz |
| cd httpd-2.3.10 |
| ./configure --enable-ssl --enable-proxy --enable-usertrack --enable-cgi --enable-session-crypto --enable-mods-shared=most --enable-mpms-shared="prefork worker event" --with-mpm=prefork --with-apr=$build/apr-1.4.x-bin --with-expat=$build/expat-2.0.1-bin --prefix=$build/httpd-2.3.10-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Memcached |
| sudo apt-get -y install libevent-dev |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| wget http://memcached.googlecode.com/files/memcached-1.4.7.tar.gz |
| tar xzf memcached-1.4.7.tar.gz |
| cd memcached-1.4.7 |
| ./configure --prefix=$build/memcached-1.4.7-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Tinycdb |
| wget http://www.corpit.ru/mjt/tinycdb/tinycdb_0.77.tar.gz |
| tar xzf tinycdb_0.77.tar.gz |
| cd tinycdb-0.77 |
| make all shared |
| make prefix=$build/tinycdb-0.77-bin install-all install-sharedlib |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Libcurl |
| wget http://curl.haxx.se/download/curl-7.19.5.tar.gz |
| tar xzf curl-7.19.5.tar.gz |
| cd curl-7.19.5 |
| ./configure --prefix=$build/curl-7.19.5-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Libxml2 |
| wget ftp://xmlsoft.org/libxml2/libxml2-sources-2.7.7.tar.gz |
| tar xzf libxml2-sources-2.7.7.tar.gz |
| cd libxml2-2.7.7 |
| ./configure --prefix=$build/libxml2-2.7.7-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Mozilla Portable Runtime |
| wget http://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v4.8.8/src/nspr-4.8.8.tar.gz |
| tar xzf nspr-4.8.8.tar.gz |
| cd nspr-4.8.8/mozilla/nsprpub |
| ./configure --prefix=$build/nspr-4.8.8-bin --enable-64bit |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build SpiderMonkey |
| sudo apt-get -y install zip unzip |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| wget http://ftp.mozilla.org/pub/mozilla.org/js/js185-1.0.0.tar.gz |
| tar xzf js185-1.0.0.tar.gz |
| cd js-1.8.5/js/src |
| export LD_RUN_PATH=$build/nspr-4.8.8-bin/lib |
| ./configure --prefix=$build/js-1.8.5-bin --enable-threadsafe --with-system-nspr --with-nspr-prefix=$build/nspr-4.8.8-bin |
| make |
| make install |
| unset LD_RUN_PATH |
| ln -s $build/js-1.8.5-bin/lib/libmozjs185.so $build/js-1.8.5-bin/lib/libmozjs.so |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Install Google AppEngine SDK |
| wget http://googleappengine.googlecode.com/files/google_appengine_1.4.0.zip |
| unzip google_appengine_1.4.0.zip |
| |
| # Build Apache Axis2/C |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| wget http://www.apache.org/dist/ws/axis2-c/1_6_0/axis2c-src-1.6.0.tar.gz |
| tar xzf axis2c-src-1.6.0.tar.gz |
| cd axis2c-src-1.6.0 |
| ./configure --enable-openssl --with-apache2=$build/httpd-2.3.10-bin/include --with-apr=$build/apr-1.4.x-bin/include/apr-2 --prefix=$build/axis2c-1.6.0-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| export AXIS2C_HOME=$build/axis2c-1.6.0-bin |
| cd samples |
| ./configure --prefix=$build/axis2c-1.6.0-bin --with-axis2=$build/axis2c-1.6.0-bin/include/axis2-1.6.0 |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Apache Qpid/C++ |
| sudo apt-get -y install libboost-dev libboost-program-options-dev libboost-filesystem-dev uuid-dev |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| wget http://archive.apache.org/dist/qpid/0.6/qpid-cpp-0.6.tar.gz |
| tar xzf qpid-cpp-0.6.tar.gz |
| cd qpidc-0.6 |
| ./configure --prefix=$build/qpidc-0.6-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Libstrophe |
| git clone git://github.com/jsdelfino/libstrophe.git |
| cd libstrophe |
| ./bootstrap.sh |
| ./configure --prefix=$build/libstrophe-bin --with-expat=$build/expat-2.0.1-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Install Apache Vysper |
| sudo apt-get -y install openjdk-6-jdk |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| wget http://archive.apache.org/dist/mina/vysper/0.6/vysper-0.6-bin.tar.gz |
| tar xzf vysper-0.6-bin.tar.gz |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| |
| # Build HTML Tidy |
| sudo apt-get -y install cvs |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cvs -z3 -d:pserver:anonymous@tidy.cvs.sourceforge.net:/cvsroot/tidy co -P tidy |
| cd tidy |
| sh build/gnuauto/setup.sh |
| ./configure --prefix=$build/htmltidy-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Libopkele |
| git clone git://github.com/jsdelfino/libopkele.git |
| cd libopkele |
| ./autogen.bash |
| ./configure --prefix=$build/libopkele-bin --with-curl=$build/curl-7.19.5-bin --with-expat=$build/expat-2.0.1-bin --with-htmltidy=$build/htmltidy-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Mod_auth_openid |
| git clone git://github.com/jsdelfino/mod_auth_openid.git |
| cd mod_auth_openid |
| ./autogen.sh |
| ./configure --prefix=$build/mod-auth-openid-bin --with-apr=$build/apr-1.4.x-bin --with-httpd=$build/httpd-2.3.10-bin --with-curl=$build/curl-7.19.5-bin --with-libopkele=$build/libopkele-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Liboauth |
| wget http://liboauth.sourceforge.net/pool/liboauth-0.9.1.tar.gz |
| tar xzf liboauth-0.9.1.tar.gz |
| cd liboauth-0.9.1 |
| ./configure --prefix=$build/liboauth-0.9.1-bin CURL_CFLAGS="-I$build/curl-7.19.5-bin/include" CURL_LIBS="-L$build/curl-7.19.5-bin/lib -R$build/curl-7.19.5-bin/lib -lcurl" |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build mod_security |
| wget http://cdnetworks-us-1.dl.sourceforge.net/project/mod-security/modsecurity-apache/2.6.0/modsecurity-apache_2.6.0.tar.gz |
| tar xzf modsecurity-apache_2.6.0.tar.gz |
| cd modsecurity-apache_2.6.0 |
| ./configure --prefix=$build/modsecurity-apache-2.6.0-bin --with-apxs=$build/httpd-2.3.10-bin/bin/apxs --with-apr=$build/apr-1.4.x-bin/bin/apr-2-config --with-apu=$build/apr-1.4.x-bin/bin/apr-2-config --with-libxml=$build/libxml2-2.7.7-bin --with-curl=$build/curl-7.19.5-bin LIBS="-L$build/expat-2.0.1-bin/lib -R$build/expat-2.0.1-bin/lib" |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| wget http://cdnetworks-us-1.dl.sourceforge.net/project/mod-security/modsecurity-crs/0-CURRENT/modsecurity-crs_2.2.0.tar.gz |
| tar xzf modsecurity-crs_2.2.0.tar.gz |
| cp -R $build/modsecurity-crs_2.2.0/base_rules $build/modsecurity-apache-2.6.0-bin |
| cp -R $build/modsecurity-crs_2.2.0/optional_rules $build/modsecurity-apache-2.6.0-bin |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| |
| # Build PostgreSQL |
| sudo apt-get -y install libreadline-dev |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| wget ftp://ftp9.us.postgresql.org/pub/mirrors/postgresql/source/v9.0.3/postgresql-9.0.3.tar.gz |
| tar xzf postgresql-9.0.3.tar.gz |
| cd postgresql-9.0.3 |
| ./configure --prefix=$build/postgresql-9.0.3-bin --enable-thread-safety |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Apache Thrift |
| sudo apt-get -y install bison flex python-dev libboost-dev libboost-filesystem-dev |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| wget http://archive.apache.org/dist/incubator/thrift/0.2.0-incubating/thrift-0.2.0-incubating.tar.gz |
| tar xzf thrift-0.2.0-incubating.tar.gz |
| cd thrift-0.2.0 |
| ./bootstrap.sh |
| ./configure --prefix=$build/thrift-0.2.0-bin PY_PREFIX=$build/thrift-0.2.0-bin --with-java=no --with-erlang=no --with-perl=no --with-ruby=no --with-csharp=no --disable-static |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Facebook fb303 |
| cd thrift-0.2.0/contrib/fb303 |
| ./bootstrap.sh |
| ./configure --prefix=$build/thrift-0.2.0-bin/contrib/fb303 PY_PREFIX=$build/thrift-0.2.0-bin/contrib/fb303 --with-thriftpath=$build/thrift-0.2.0-bin --disable-static |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cp cpp/lib/libfb303.so $build/thrift-0.2.0-bin/contrib/fb303/lib |
| cd $build |
| |
| # Build Facebook Scribe |
| sudo apt-get -y install gawk |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| wget --no-check-certificate http://github.com/downloads/facebook/scribe/scribe-2.2.tar.gz |
| tar xzf scribe-2.2.tar.gz |
| cd scribe |
| ./bootstrap.sh --prefix=$build/scribe-2.2-bin PY_PREFIX=$build/scribe-2.2-bin --with-thriftpath=$build/thrift-0.2.0-bin --with-fb303path=$build/thrift-0.2.0-bin/contrib/fb303 --disable-static |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cp src/lib/libscribe.so $build/scribe-2.2-bin/lib |
| cd $build |
| |
| # Build Apache Libcloud |
| wget http://archive.apache.org/dist/incubator/libcloud/apache-libcloud-incubating-0.4.2.tar.bz2 |
| tar xjf apache-libcloud-incubating-0.4.2.tar.bz2 |
| cd apache-libcloud-incubating-0.4.2 |
| python setup.py build |
| python setup.py install --home $build/libcloud-0.4.2-bin |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Apache Nuvem |
| git clone git://git.apache.org/nuvem.git |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Build Tuscany SCA |
| git clone git://git.apache.org/tuscany-sca-cpp.git |
| cd tuscany-sca-cpp |
| ./bootstrap |
| ./configure --prefix=$build/tuscany-sca-cpp-bin --with-curl=$build/curl-7.19.5-bin --with-apr=$build/apr-1.4.x-bin --with-httpd=$build/httpd-2.3.10-bin --with-memcached=$build/memcached-1.4.7-bin --with-tinycdb=$build/tinycdb-0.77-bin --with-js-include=$build/js-1.8.5-bin/include/js --with-js-lib=$build/js-1.8.5-bin/lib --with-libcloud=$build/libcloud-0.4.2-bin --enable-threads --enable-python --enable-gae --with-gae=$build/google_appengine --enable-java --with-java=/usr/lib/jvm/java-6-openjdk --enable-webservice --with-libxml2=$build/libxml2-2.7.7-bin --with-axis2c=$build/axis2c-1.6.0-bin --enable-queue --with-qpidc=$build/qpidc-0.6-bin --enable-chat --with-libstrophe=$build/libstrophe-bin --with-vysper=$build/vysper-0.6 --enable-sqldb --with-pgsql=$build/postgresql-9.0.3-bin --enable-log --with-thrift=$build/thrift-0.2.0-bin --with-scribe=$build/scribe-2.2-bin --enable-openid --with-mod-auth-openid=$build/mod-auth-openid-bin --enable-oauth --with-liboauth=$build/liboauth-0.9.1-bin --enable-mod-security --with-mod-security=$build/modsecurity-apache-2.6.0-bin |
| make |
| make install |
| if [ "$?" != "0" ]; then |
| exit $? |
| fi |
| cd $build |
| |
| # Create src archive |
| tar czf tuscany-sca-cpp-all-1.0-src.tar.gz apache-libcloud-incubating-0.4.2 apache-libcloud-incubating-0.4.2.tar.bz2 apr-1.4.x apr-1.4.x-bin axis2c-1.6.0-bin axis2c-src-1.6.0 axis2c-src-1.6.0.tar.gz curl-7.19.5 curl-7.19.5-bin curl-7.19.5.tar.gz expat-2.0.1 expat-2.0.1-bin expat-2.0.1.tar.gz google_appengine google_appengine_1.4.0.zip htmltidy-bin httpd-2.3.10 httpd-2.3.10-alpha.tar.gz httpd-2.3.10-bin js-1.8.5-bin js-1.8.5 js185-1.0.0.tar.gz libcloud-0.4.2-bin liboauth-0.9.1 liboauth-0.9.1-bin liboauth-0.9.1.tar.gz libopkele libopkele-bin libstrophe libstrophe-bin libxml2-2.7.7 libxml2-2.7.7-bin libxml2-sources-2.7.7.tar.gz memcached-1.4.7 memcached-1.4.7-bin memcached-1.4.7.tar.gz mod_auth_openid mod-auth-openid-bin modsecurity-apache_2.6.0 modsecurity-apache-2.6.0-bin modsecurity-apache_2.6.0.tar.gz modsecurity-crs_2.2.0 modsecurity-crs_2.2.0.tar.gz nspr-4.8.8-bin nspr-4.8.8 nspr-4.8.8.tar.gz nuvem postgresql-9.0.3 postgresql-9.0.3-bin postgresql-9.0.3.tar.gz qpidc-0.6 qpidc-0.6-bin qpid-cpp-0.6.tar.gz scribe scribe-2.2-bin scribe-2.2.tar.gz thrift-0.2.0 thrift-0.2.0-bin thrift-0.2.0-incubating.tar.gz tidy tinycdb-0.77 tinycdb-0.77-bin tinycdb_0.77.tar.gz tuscany-sca-cpp tuscany-sca-cpp-bin vysper-0.6 vysper-0.6-bin.tar.gz |
| |
| # Create bin archive |
| tar czf tuscany-sca-cpp-all-1.0.tar.gz apr-1.4.x-bin axis2c-1.6.0-bin curl-7.19.5-bin expat-2.0.1-bin google_appengine htmltidy-bin httpd-2.3.10-bin js-1.8.5-bin libcloud-0.4.2-bin liboauth-0.9.1-bin libopkele-bin libstrophe-bin libxml2-2.7.7-bin memcached-1.4.7-bin mod-auth-openid-bin modsecurity-apache-2.6.0-bin nspr-4.8.8-bin nuvem/nuvem-parallel postgresql-9.0.3-bin qpidc-0.6-bin scribe-2.2-bin thrift-0.2.0-bin tinycdb-0.77-bin tuscany-sca-cpp tuscany-sca-cpp-bin vysper-0.6 |
| |